It's provided by sys.mk so there's no need to derive it from ${.CURDIR}.
Suggested by: ngie
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5998
- notionally support a 'history file' flag. This doesn't do much now,
but is there to prevent scripts written against GNU units from
breaking
- correctly gracefully quit rather than exit (this will make it easier
to support a history file in the future)
- remove the "t" flag from fopen which was there to support windows. We
have not supported windows since at the latest, the introduction of
capsicum.
mklocale and colldef has been replaced by localedef, but they have to be kept
until 10.2 is EOL for mklocale (it has been added to 10.3 as a bootstrap tools)
and until 10.3 is EOL for colldef (it has never been added to bootstrap tools)
This avoids 'build command changed' due to CFLAGS/CC changes during the
normal build. Without this the build-tools targets end up rebuilding
for the *target* rather than keeping the native versions built in
build-tools.
Sponsored by: EMC / Isilon Storage Division
This is rather ugly, because the RIPE and APNIC whois servers do
not provide referrals for address blocks that they do not manage.
However ARIN is usually the right place or knows the right place
so we try there.
The particular instance which clued me in to this bug is U.Mich.
141.211.0.0/16 for which the referral chain should be IANA ->
RIPE -> ARIN. RIPE's RDAP does provide useful redirects (for
example try `curl -I http://rdap.db.ripe.net/ip/141.211.0.0)
so maybe their whois server can be improved.
AfriNIC's whois server gives more direct referrals, but they are
designed to be human-readable. Ugly, but we can manage.
The issue of referrals between RIRs is likely to become more important
in the future whith the increasing number of cross-region IP address
block transfers increases.
This matches with uudecode's -r option to decode raw data without initial and
final framing lines.
$ echo Test | uuencode -mr - | uudecode -mr
Test
Approved by: cognet
MFC after: 1 week
for limiting disk (actually filesystem) IO.
Note that in some cases these limits are not quite precise. It's ok,
as long as it's within some reasonable bounds.
Testing - and review of the code, in particular the VFS and VM parts - is
very welcome.
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5080
This appears to be implementation dependent but convenient and makes
our sed behave more like GNU sed.
Given that it is not the historic behavior, bump FreeBSD_version
should userland/ports somehow depend on it.
Obtained from: NetBSD (bin/49872)
Reviewed by: bdrewery
PR: 208554
Merge after: NEVER
In the case the width is less than 0, we are returning an uninitialized
value. For practical purposes the return value is ignored but initialize
it to avoid trouble.
CID: 1341619
The type definitions and constants that were used by COMPAT_CLOUDABI64
are a literal copy of some headers stored inside of CloudABI's C
library, cloudlibc. What is annoying is that we can't make use of
cloudlibc's system call list, as the format is completely different and
doesn't provide enough information. It had to be synced in manually.
We recently decided to solve this (and some other problems) by moving
the ABI definitions into a separate file:
https://github.com/NuxiNL/cloudabi/blob/master/cloudabi.txt
This file is processed by a pile of Python scripts to generate the
header files like before, documentation (markdown), but in our case more
importantly: a FreeBSD system call table.
This change discards the old files in sys/contrib/cloudabi and replaces
them by the latest copies, which requires some minor changes here and
there. Because cloudabi.txt also enforces consistent names of the system
call arguments, we have to patch up a small number of system call
implementations to use the new argument names.
The new header files can also be included directly in FreeBSD kernel
space without needing any includes/defines, so we can now remove
cloudabi_syscalldefs.h and cloudabi64_syscalldefs.h. Patch up the
sources to include the definitions directly from sys/contrib/cloudabi
instead.
handle NFS shares containing whitespace. This also adds the -E parameter
to showmount(8).
Reviewed by: emaste@, jhibbits@, wblock@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5649
Illumos recently included space in 'print' class. We already had
this but the code had slight sorting differences. Move it some
lines up to reduce diffs with Illumos.
No functional change.
Reference:
https://illumos.org/issues/5227
Archive member handling works again
meta mode, treat missing reads as for writes.
Update dirdeps.mk - much improved startup time.
Update meta.stage.mk - avoid ln when chmod required.
When finger is invoked as as "finger username", it produces the
long listing by default, and phones numbers are pretty-printed
by the prphone() function. When invoked as just "finger", the
same pretty-printing happens, but is truncated at 9 characters.
Given the summary listing is already greater than 80 columns,
making it even wider is of no harm.
Approved by: rpaulo (mentor)
Differential Revision: https://reviews.freebsd.org/D5638
some combinations of command line options and search patterns. The code was
examining regexec flags looking for a regcomp flag value. The fix is to
look in the struct field where the decoded regcomp flag was stored when the
regex was compiled.
With this fix, it's possible to build WITHOUT_GNU_GREP_COMPAT and
WITH_BSDGREP and have a usable GPL-free grep (which of course lacks gnugrep
extensions). It now passes the kyua tests except for one test that requires
the -z/--null-data gnu extension, and one test involving outputting context
lines across multiple files which appears to sometimes output an extra
delimiter line ("--") between matches (a rather obscure failure of a rather
obscure feature, so bsdgrep should be generally usable now).
This may be used in later checks, such as in bsd.dep.mk, to
enable features that rely on the built-in value.
Sponsored by: EMC / Isilon Storage Division
- truss can now log the system call invoked by a thread during a
voluntary process exit. No return value is logged, but the value passed
to exit() is included in the trace output. Arguments passed to thread
exit system calls such as thr_exit() are not logged as voluntary thread
exits cannot be distinguished from involuntary thread exits during a
system call.
- New events are now reported for thread births and exits similar to the
recently added events for new child processes when following forks.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5561
- Advertise the word size for CloudABI ABIs via the SV_LP64 flag. All of
the other ABIs include either SV_ILP32 or SV_LP64.
- Fix kdump to not assume a 32-bit ABI if the ABI flags field is non-zero
but SV_LP64 isn't set. Instead, only assume a 32-bit ABI if SV_ILP32 is
set and fallback to the unknown value of "00" if neither SV_LP64 nor
SV_ILP32 is set.
Reviewed by: kib, ed
Differential Revision: https://reviews.freebsd.org/D5560
No functional change.
This is mostly addressing a false-positive from the clang static
analyzer due to it thinking that done() was being called with freed
memory, however the kill(0, SIGTERM) made the done() never reached.
It doesn't make sense to the show the footer from the child anyhow, nor
does it make sense to kill the process group here since the execve(2)
failed in the child. This code was leftover from many years of refactoring.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This is the same as how the bmake filemon usage works.
This also fixes failed attach not properly flushing the TTY.
MFC after: 1 week
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
breaking the ABI. Special value is stored in the lock pointer to
indicate shared lock, and offline page in the shared memory is
allocated to store the actual lock.
Reviewed by: vangyzen (previous version)
Discussed with: deischen, emaste, jhb, rwatson,
Martin Simmons <martin@lispworks.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
This does not decode arguments to system calls but should properly
decode system call names and error return values.
Reviewed by: ed
Differential Revision: https://reviews.freebsd.org/D5412
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
and geom_uncompress(4):
1. mkuzip(8):
- Proper support for eliminating all-zero blocks when compressing an
image. This feature is already supported by the geom_uzip(4) module
and CLOOP format in general, so it's just a matter of making mkuzip(8)
match. It should be noted, however that this feature while it sounds
great, results in very slight improvement in the overall compression
ratio, since compressing default 16k all-zero block produces only 39
bytes compressed output block, which is 99.8% compression ratio. With
typical average compression ratio of amd64 binaries and data being
around 60-70% the difference between 99.8% and 100.0% is not that
great further diluted by the ratio of number of zero blocks in the
uncompressed image to the overall number of blocks being less than
0.5 (typically). However, this may be important from performance
standpoint, so that kernel are not spinning its wheels decompressing
those empty blocks every time this zero region is read. It could also
be important when you create huge image mostly filled with zero
blocks for testing purposes.
- New feature allowing to de-duplicate output image. It turns out that
if you twist CLOOP format a bit you can do that as well. And unlike
zero-blocks elimination, this gives a noticeable improvement in the
overall compression ratio, reducing output image by something like
3-4% on my test UFS2 3GB image consisting of full FreeBSD base system
plus some of the packages (openjdk, apache etc), about 2.3GB worth of
file data (800+MB compressed). The only caveat is that images created
with this feature "on" would not work on older versions of FeeBSDxi
kernel, hence it's turned off by default.
- provide options to control both features and document them in manual
page.
- merge in all relevant LZMA compression support from the mkulzma(8),
add new option to select between both.
- switch license from ad-hoc beerware into standard 2-clause BSD.
2. geom_uzip(4):
- implement support for de-duplicated images;
- optimize some code paths to handle "all-zero" blocks without reading
any compressed data;
- beef up manual page to explain that geom_uzip(4) is not limited only
to md(4) images. The compressed data can be written to the block
device and accessed directly via magic of GEOM(4) and devfs(4),
including to mount root fs from a compressed drive.
- convert debug log code from being compiled in conditionally into
being present all the time and provide two sysctls to turn it on or
off. Due to intended use of the module, it can be used in
environments where there may not be a luxury to put new kernel with
debug code enabled. Having those options handy allows debug issues
without as much problem by just having access to serial console or
network shell access to a box/appliance. The resulting additional
CPU cycles are just few int comparisons and branches, and those are
minuscule when compared to data decompression which is the main
feature of the module.
- hopefully improve robustness and resiliency of the geom_uzip(4) by
performing some of the data validation / range checking on the TOC
entries and rejecting to attach to an image if those checks fail.
- merge in all relevant LZMA decompression support from the
geom_uncompress(4), enable automatically when appropriate format is
indicated in the header.
- move compilation work into its own worker thread so that it does not
clog g_up. This allows multiple instances work in parallel utilizing
smp cores.
- document new knobs in the manual page.
Reviewed by: adrian
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D5333
Add two new functions, sysdecode_abi_to_freebsd_errno() and
sysdecode_freebsd_to_abi_errno(), which convert errno values between
the native FreeBSD ABI and other supported ABIs. Note that the
mappings are not necessarily perfect meaning in some cases multiple
errors in one ABI might map to a single error in another ABI. In that
case, the reverse mapping will return one of the errors that maps, but
which error is non-deterministic.
Change truss to always report the raw error value to the user but
use libsysdecode to map it to a native errno value that can be used
with strerror() to generate a description. Previously truss reported
the "converted" error value. Now the user will always see the exact
error value that the application sees.
Change kdump to report the truly raw error value to the user. Previously
kdump would report the absolute value of the raw error value (so for
Linux binaries it didn't output the FreeBSD error value, but the positive
value of the Linux error). Now it reports the real (i.e. negative) error
value for Linux binaries. Also, use libsysdecode to convert the native
FreeBSD error reported in the ktrace record to the raw error used by the
ABI. This means that the Linux ABI can now be handled directly in
ktrsysret() and removes the need for linux_ktrsysret().
Reviewed by: bdrewery, kib
Helpful notes: wblock (manpage)
Differential Revision: https://reviews.freebsd.org/D5314
- Consolidate duplicate code for printing the metadata at the start of
each line into a shared function.
- Add an -H option which will log the thread ID of the relevant thread
for each event.
While here, remove some extraneous calls to clock_gettime() in
print_syscall() and print_syscall_ret(). The caller of print_syscall_ret()
always updates the current thread's "after" time before it is called.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D5363
The output file is created as a temporary file that is moved over the
existing file after completion. Thus there is no need to immediately
flush all created db records to the temporary file.
This speeds up creation of the termcap db by a factor of 40 on my
ZFS based /etc filesytem (from 25 seconds to 0.6 seconds).
I have compared multiple output files created with and without O_SYNC
and they came out identical each time. Nonetheless it might be best
to MFC this change and the similar one for services_mkdb (r295465) at
the same time when the changes to hash.c in review D5186 are merged.
MFC: 1 week
The wrapper script has moved to libexec/makewhatis.local since it is not
directlry related to the older makewhatis(1) utility that has been replaced
by the usr.bin/mandoc version.
Reported by: vangyzen
instead of passing some of that state as arguments to print_syscall() and
print_syscallret(). This just makes the calls of these functions shorter
and easier to read.
schg flag are handled before being replaced by a symbolic link.
Fix passwd(1)/yppasswd(1) schg issue similarly to chpass(1).
Note: These are likely temporary fixes while identifying any
remaining files that are not marked as 'flags=schg' via mtree(8).
Sponsored by: The FreeBSD Foundation
For scripts using dialog(1) several times, it can be visually distracting
running dpv(1) several times amidst other dialogs. The `-k' option, similar
to dialog(1) `--keep-tite', enables the same functionality to smooth ti/te.
A new sysdecode_syscallname() function accepts a system call code and
returns a string of the corresponding name (or NULL if the code is
unknown). To support different process ABIs, the new function accepts a
value from a new sysdecode_abi enum as its first argument to select the
ABI in use. Current ABIs supported include FREEBSD (native binaries),
FREEBSD32, LINUX, LINUX32, and CLOUDABI64. Note that not all ABIs are
supported by all platforms. In general, a given ABI is only supported
if a platform can execute binaries for that ABI.
To simplify the implementation, libsysdecode's build reuses the
existing pre-generated files from the kernel source tree rather than
duplicating new copies of said files during the build.
kdump(1) and truss(1) now use these functions to map system call
identifiers to names. For kdump(1), a new 'syscallname()' function
consolidates duplicated code from ktrsyscall() and ktrsyscallret().
The Linux ABI no longer requires custom handling for ktrsyscall() and
linux_ktrsyscall() has been removed as a result.
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D4823
STT_SPARC_REGISTER is a SPARC-specific symbol type specified by the
Sparcv9 ABI to provide some information on register use by the object.
Also rework st_info type lookup to avoid out-of-bounds array access.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Ensure the special cases trigger whether we come via a referral
or via the -c option. Match host names case-insensitively.
Use the default character set supported by .de (UTF-8) since that
is more compatible with the modern world than ISO 8859-1. Persuade
them to give us a useful answer whether an internationalized
domain name is given in UTF-8 or in punycode.
The IANA whois server has the right referral information for domain
names, IP addresses, and AS numbers, so whois does not need to be
able to choose servers itself (except for a few cases where referrals
do not work). We can delete a chunk of code, which is always fun.
This change improves the referral handling to be less sensitive to
all the various formats, and to allow multi-hop referral chains,
such as IANA -> registry -> registrar.
ARIN queries have the "+" flag added if no flags are present, so we
get full details if the query matches multiple objects. The Verisign
anti-spam logic is also now suppressed if the user provided a non-
trivial query string.
Uninformative rubric is now trimmed by default. The -S option
turns off trimming, and disables query fettling.
The -i option is back to its traditional pre-1999 hostname, since
whois.internic.net is more useful than whois.networksolutions.com.
Note that the old fallback/default server whois.crsnic.net is an
alias for whois.internic.net.
The manual is more informative about query syntax.
Look up AS numbers at ARIN.
Handle more referral formats.
Suppress spammy nameserver objects when querying the .com and .net
whois servers by explicitly querying for domain names by default.
