This also fixes a few minor violations of the SD protocol, such as running
the bus at high speed during the card identification sequence.
The sdcard_init() routine now probes for SDHC cards so that later read
requests can make needed adjustments between block and byte offsets based
on card type.
There is a new MCI_readblocks() function that takes block number and block
count parameters instead of byte-offset values. Using this routine, boot
loader code can load a kernel from any location on an SDHC or standard SD.
The old MCI_read() interface remains unchanged so that existing customized
boot loader code will still keep working without changes. Using this
routine, boot loaders can load a kernel from anywhere in the first 4GB of
an SDHC card (or of course any location on a standard SD card).
A new sdcard_use4wire() routine allows boot loaders to request 4-bit
transfers; it should be called after sdcard_init(). The sdcard_init()
routine no longer assumes the hardware is 4-wire capable and by default
sets things up for 1-bit transfers. (4-wire mode is unreliable on
at91rm9200, works on later SoCs.)
PR: 155894
Submitted by: me. years ago.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
100 bytes from the binary with silly tricks. Hope to get this small
enough to run on the models that have 4k SRAM. We are close compiled
for the at91rm9200, but still need to trim for the target.
# This doesn't implement the full Linux boot ABI for arm yet.
# since there's no ATAGs list passed in for r2, and r0 has
# boot options rather than 0 as specified in the standard.
# Commited code to the tree won't touch any of this anyway, but
# future code may be able to use this.
If I interpret the C standard correctly, the storage specifier should be
placed before the inline keyword. While at it, replace __inline by
inline in the files affected.
bring in FIXUP_BOOT_DRV functionality as an #ifdef. This is not
enabled at this time, and the md5 remains constant with this change.
Apart from the 'accept any partitioning scheme on the device' changes,
this was the biggest delta...
# and yes, we'll merge these into one source file if we can do that in a
# way that makes sense.
Obtained from: sys/boot/arm/ixp425/boot2/boot2.c
code. Added a copyright for the work I did to this file a couple of
years ago. Add John's copyright too, since I'm sure I'll be pulling
more into this code. This also implements a new -n option to not
allow breaking into the boot sequence which was original in the patch
John posted (not in the original i386 code I based this boot2.c on,
only the name is the same). I haven't checked to see if he did that,
or if it was one of Sam's improvements.
Submitted by: jhay@
- It is opt-out for now so as to give it maximum testing, but it may be
turned opt-in for stable branches depending on the consensus. You
can turn it off with WITHOUT_SSP.
- WITHOUT_SSP was previously used to disable the build of GNU libssp.
It is harmless to steal the knob as SSP symbols have been provided
by libc for a long time, GNU libssp should not have been much used.
- SSP is disabled in a few corners such as system bootstrap programs
(sys/boot), process bootstrap code (rtld, csu) and SSP symbols themselves.
- It should be safe to use -fstack-protector-all to build world, however
libc will be automatically downgraded to -fstack-protector because it
breaks rtld otherwise.
- This option is unavailable on ia64.
Enable GCC stack protection (aka Propolice) for kernel:
- It is opt-out for now so as to give it maximum testing.
- Do not compile your kernel with -fstack-protector-all, it won't work.
Submitted by: Jeremie Le Hen <jeremie@le-hen.org>
defined. This lets each boot program choose which version of cgbase() it
wants to use rather than forcing ufsread.c to have that knowledge.
MFC after: 1 week
Discussed with: imp
order. The kernel used to shuffle them around to get things right,
but that was recently fixed. This makes our boot loader match the
behavior of most other boot loaders for the atmel parts. This bug was
inherited from the Kwikbyte loader that we started from.
This bug was discovered by Bj.ANvrn KNvnig back in June, but fell on the
floor. He provided patches to the kernel, include backwards
compatibility options that were similar to Olivier's if_ate.c commit.
Add support for the CENTIPAD board (http://www.harerod.de/centipad/index.html)
(which is a very cool, very small ARM board)
Add support for KB9202B (it has different memory)
Make BOOT_FLAVOR settable
Minor cleanup nits
Approved by: re@
GetSeconds(). Instead, use CRTR register shifted right 15. This
gives us a range of 32 seconds we can do for timeout.
Shift to using == rather than < or > for calculating the timeout,
since if we can't read the ST_CTRT register twice in a second we have
even bigger problems to worry about, and == deals with the 'wrap'
issue.
This lets me type at the boot2 prompt again! Woo Hoo!
Bogusness noticed by: tisco
Pointy Hat to: That silly imp guy
CSD is usually 512 (well, 9), but for 2GB (and the rogue 4GB SD cards)
it is 1024 (or 2048 for 4GB). This value doesn't work for the block
read commands (which really want 512). Hardcode 512 for those. This
may break really old MMC cards that don't have a 512 block size (I've
never seen one: make my day and send me one :-), but since the MMC
side of the house is currently broken, it should only have the effect
that 2GB (and non-conforming 4GB) SD cards will work.
My 'non-conforming' 4GB SD card also works now too. The
non-conforming 4GB SD cards were sold for a while before the SD
association was worried they would be (a) incompatible (different FAT
flavor on them) and (b) confusing for the new SDHC standard and
cracked down on suppliers' bogus use of the SD trademark...
The changes to getstr() is so that the character that is
passed in to it, is also processed just as the rest. I also
removed one of the getc() calls otherwise you loose every
second character.
I also changed the strcpy of kname, so that it only happens if
kname is '\0'. This is so that one can pass a kernel in
through /boot.config.
The last change to boot2.c is in parse(). If you tried to type
a kernel name to boot, the first character was lost, the arg--
fix that.
Submitted by: jhay
