net/route.h.
Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.
We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.
This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.
- Prepare for CRC offloading, add MIB counters (RS/MT).
- Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT).
- Bugfix: Handle close() with SO_LINGER correctly when notifications
are generated during the close() call(MT).
- Bugfix: Generate DRY event when sender is dry during subscription.
Only for 1-to-1 style sockets (RS/MT)
- Bugfix: Put vtags for the correct amount of time into time-wait (MT).
- Bugfix: Clear vtag entries correctly on expiration (MT).
- Bugfix: shutdown() indicates ENOTCONN when called for unconnected
1-to-1 style sockets (MT).
- Bugfix: In sctp Auth code (PL).
- Add support for devices that support SCTP csum offload (igb).
- Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS)
Obtained from: With help from Peter Lei and Michael Tuexen
container structures, depending on VIMAGE_GLOBALS compile time option.
Make VIMAGE_GLOBALS a new compile-time option, which by default will not
be defined, resulting in instatiations of global variables selected for
V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be
effectively compiled out. Instantiate new global container structures
to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0,
vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0.
Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_
macros resolve either to the original globals, or to fields inside
container structures, i.e. effectively
#ifdef VIMAGE_GLOBALS
#define V_rt_tables rt_tables
#else
#define V_rt_tables vnet_net_0._rt_tables
#endif
Update SYSCTL_V_*() macros to operate either on globals or on fields
inside container structs.
Extend the internal kldsym() lookups with the ability to resolve
selected fields inside the virtualization container structs. This
applies only to the fields which are explicitly registered for kldsym()
visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently
this is done only in sys/net/if.c.
Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code,
and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in
turn result in proper code being generated depending on VIMAGE_GLOBALS.
De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c
which were prematurely V_irtualized by automated V_ prepending scripts
during earlier merging steps. PF virtualization will be done
separately, most probably after next PF import.
Convert a few variable initializations at instantiation to
initialization in init functions, most notably in ipfw. Also convert
TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in
initializer functions.
Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
bit of debugging afterwards):
- Fix protection code for notification generation.
- Decouple associd from vtag
- Allow vtags to have less strigent requirements in non-uniqueness.
o don't pre-hash them when you issue one in a cookie.
o Allow duplicates and use addresses and ports to
discriminate amongst the duplicates during lookup.
- Add support for the NAT draft draft-ietf-behave-sctpnat-00, this
is still experimental and needs more extensive testing with the
Jason Butt ipfw changes.
- Support for the SENDER_DRY event to get DTLS in OpenSSL working
with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon).
- Update the support of SCTP-AUTH by Peter Lei.
- Use macros for refcounting.
- Fix MTU for UDP encapsulation.
- Fix reporting back of unsent data.
- Update assoc send counter handling to be consistent with endpoint sent counter.
- Fix a bug in PR-SCTP.
- Fix so we only send another FWD-TSN when a SACK arrives IF and only
if the adv-peer-ack point progressed. However we still make sure
a timer is running if we do have an adv_peer_ack point.
- Fix PR-SCTP bug where chunks were retransmitted if they are sent
unreliable but not abandoned yet.
With the help of: Michael Teuxen and Peter Lei :-)
MFC after: 4 weeks
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.
For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.
Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation
virtualization work done by Marko Zec (zec@).
This is the first in a series of commits over the course
of the next few weeks.
Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.
We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.
Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch
2) Adds some __UserSpace__ on some of the common defines that
the user space code needs
3) Fixes a bug when we send up data to a user that failed. We
need to a) trim off the data chunk headers, if present, and
b) make sure the frag bit is communicated properly for the
msgs coming off the stream queues... i.e. we see if some
of the msg has been taken.
Obtained from: jeli contributed the VIMAGE changes on this pass Thanks Julain!
- Vimage prep - these are major restructures to move
all global variables to be accessed via a macro or two.
The variables all go into a single structure.
- Asconf address addition tweaks (add_or_del Interfaces)
- Fix rwnd calcualtion to be more conservative.
- Support SACK_IMMEDIATE flag to skip delayed sack
by demand of peer.
- Comment updates in the sack mapping calculations
- Invarients panic added.
- Pre-support for UDP tunneling (we can do this on
MAC but will need added support from UDP to
get a "pipe" of UDP packets in.
- clear trace buffer sysctl added when local tracing on.
Note the majority of this huge patch is all the vimage prep stuff :-)
- Adds some prepwork (Not all yet) for vimage in particular
support the delete the sctppcbinfo.xx structs. There is
still a leak in here if it were to be called plus we stil
need the regrouping (From Me and Michael Tuexen)
- Adds support for UDP tunneling. For BSD there is no
socket yet setup so its disabled, but major argument
changes are in here to emcompass the passing of the port
number (zero when you don't have a udp tunnel, the default
for BSD). Will add some hooks in UDP here shortly (discussed
with Robert) that will allow easy tunneling. (Mainly from
Peter Lei and Michael Tuexen with some BSD work from me :-D)
- Some ease for windows, evidently leave is reserved by their
compile move label leave: -> out:
MFC after: 1 week
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)
Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.
From my notes:
-----
One thing where FreeBSD has been falling behind, and which by chance I
have some time to work on is "policy based routing", which allows
different
packet streams to be routed by more than just the destination address.
Constraints:
------------
I want to make some form of this available in the 6.x tree
(and by extension 7.x) , but FreeBSD in general needs it so I might as
well do it in -current and back port the portions I need.
One of the ways that this can be done is to have the ability to
instantiate multiple kernel routing tables (which I will now
refer to as "Forwarding Information Bases" or "FIBs" for political
correctness reasons). Which FIB a particular packet uses to make
the next hop decision can be decided by a number of mechanisms.
The policies these mechanisms implement are the "Policies" referred
to in "Policy based routing".
One of the constraints I have if I try to back port this work to
6.x is that it must be implemented as a EXTENSION to the existing
ABIs in 6.x so that third party applications do not need to be
recompiled in timespan of the branch.
This first version will not have some of the bells and whistles that
will come with later versions. It will, for example, be limited to 16
tables in the first commit.
Implementation method, Compatible version. (part 1)
-------------------------------
For this reason I have implemented a "sufficient subset" of a
multiple routing table solution in Perforce, and back-ported it
to 6.x. (also in Perforce though not always caught up with what I
have done in -current/P4). The subset allows a number of FIBs
to be defined at compile time (8 is sufficient for my purposes in 6.x)
and implements the changes needed to allow IPV4 to use them. I have not
done the changes for ipv6 simply because I do not need it, and I do not
have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.
Other protocol families are left untouched and should there be
users with proprietary protocol families, they should continue to work
and be oblivious to the existence of the extra FIBs.
To understand how this is done, one must know that the current FIB
code starts everything off with a single dimensional array of
pointers to FIB head structures (One per protocol family), each of
which in turn points to the trie of routes available to that family.
The basic change in the ABI compatible version of the change is to
extent that array to be a 2 dimensional array, so that
instead of protocol family X looking at rt_tables[X] for the
table it needs, it looks at rt_tables[Y][X] when for all
protocol families except ipv4 Y is always 0.
Code that is unaware of the change always just sees the first row
of the table, which of course looks just like the one dimensional
array that existed before.
The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
are all maintained, but refer only to the first row of the array,
so that existing callers in proprietary protocols can continue to
do the "right thing".
Some new entry points are added, for the exclusive use of ipv4 code
called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
which have an extra argument which refers the code to the correct row.
In addition, there are some new entry points (currently called
rtalloc_fib() and friends) that check the Address family being
looked up and call either rtalloc() (and friends) if the protocol
is not IPv4 forcing the action to row 0 or to the appropriate row
if it IS IPv4 (and that info is available). These are for calling
from code that is not specific to any particular protocol. The way
these are implemented would change in the non ABI preserving code
to be added later.
One feature of the first version of the code is that for ipv4,
the interface routes show up automatically on all the FIBs, so
that no matter what FIB you select you always have the basic
direct attached hosts available to you. (rtinit() does this
automatically).
You CAN delete an interface route from one FIB should you want
to but by default it's there. ARP information is also available
in each FIB. It's assumed that the same machine would have the
same MAC address, regardless of which FIB you are using to get
to it.
This brings us as to how the correct FIB is selected for an outgoing
IPV4 packet.
Firstly, all packets have a FIB associated with them. if nothing
has been done to change it, it will be FIB 0. The FIB is changed
in the following ways.
Packets fall into one of a number of classes.
1/ locally generated packets, coming from a socket/PCB.
Such packets select a FIB from a number associated with the
socket/PCB. This in turn is inherited from the process,
but can be changed by a socket option. The process in turn
inherits it on fork. I have written a utility call setfib
that acts a bit like nice..
setfib -3 ping target.example.com # will use fib 3 for ping.
It is an obvious extension to make it a property of a jail
but I have not done so. It can be achieved by combining the setfib and
jail commands.
2/ packets received on an interface for forwarding.
By default these packets would use table 0,
(or possibly a number settable in a sysctl(not yet)).
but prior to routing the firewall can inspect them (see below).
(possibly in the future you may be able to associate a FIB
with packets received on an interface.. An ifconfig arg, but not yet.)
3/ packets inspected by a packet classifier, which can arbitrarily
associate a fib with it on a packet by packet basis.
A fib assigned to a packet by a packet classifier
(such as ipfw) would over-ride a fib associated by
a more default source. (such as cases 1 or 2).
4/ a tcp listen socket associated with a fib will generate
accept sockets that are associated with that same fib.
5/ Packets generated in response to some other packet (e.g. reset
or icmp packets). These should use the FIB associated with the
packet being reponded to.
6/ Packets generated during encapsulation.
gif, tun and other tunnel interfaces will encapsulate using the FIB
that was in effect withthe proces that set up the tunnel.
thus setfib 1 ifconfig gif0 [tunnel instructions]
will set the fib for the tunnel to use to be fib 1.
Routing messages would be associated with their
process, and thus select one FIB or another.
messages from the kernel would be associated with the fib they
refer to and would only be received by a routing socket associated
with that fib. (not yet implemented)
In addition Netstat has been edited to be able to cope with the
fact that the array is now 2 dimensional. (It looks in system
memory using libkvm (!)). Old versions of netstat see only the first FIB.
In addition two sysctls are added to give:
a) the number of FIBs compiled in (active)
b) the default FIB of the calling process.
Early testing experience:
-------------------------
Basically our (IronPort's) appliance does this functionality already
using ipfw fwd but that method has some drawbacks.
For example,
It can't fully simulate a routing table because it can't influence the
socket's choice of local address when a connect() is done.
Testing during the generating of these changes has been
remarkably smooth so far. Multiple tables have co-existed
with no notable side effects, and packets have been routes
accordingly.
ipfw has grown 2 new keywords:
setfib N ip from anay to any
count ip from any to any fib N
In pf there seems to be a requirement to be able to give symbolic names to the
fibs but I do not have that capacity. I am not sure if it is required.
SCTP has interestingly enough built in support for this, called VRFs
in Cisco parlance. it will be interesting to see how that handles it
when it suddenly actually does something.
Where to next:
--------------------
After committing the ABI compatible version and MFCing it, I'd
like to proceed in a forward direction in -current. this will
result in some roto-tilling in the routing code.
Firstly: the current code's idea of having a separate tree per
protocol family, all of the same format, and pointed to by the
1 dimensional array is a bit silly. Especially when one considers that
there is code that makes assumptions about every protocol having the
same internal structures there. Some protocols don't WANT that
sort of structure. (for example the whole idea of a netmask is foreign
to appletalk). This needs to be made opaque to the external code.
My suggested first change is to add routing method pointers to the
'domain' structure, along with information pointing the data.
instead of having an array of pointers to uniform structures,
there would be an array pointing to the 'domain' structures
for each protocol address domain (protocol family),
and the methods this reached would be called. The methods would have
an argument that gives FIB number, but the protocol would be free
to ignore it.
When the ABI can be changed it raises the possibilty of the
addition of a fib entry into the "struct route". Currently,
the structure contains the sockaddr of the desination, and the resulting
fib entry. To make this work fully, one could add a fib number
so that given an address and a fib, one can find the third element, the
fib entry.
Interaction with the ARP layer/ LL layer would need to be
revisited as well. Qing Li has been working on this already.
This work was sponsored by Ironport Systems/Cisco
Reviewed by: several including rwatson, bz and mlair (parts each)
Obtained from: Ironport systems/Cisco
also involves macro changes to have a RLOCK and a WLOCK
and placing the correct version within the code.
- The INP-INFO lock is changed to a rwlock.
- When sctp_shutdown() is called on Mac OS X, the socket lock is held.
So call sctp_chunk_output with SCTP_SO_LOCKED and
not SCTP_SO_NOT_LOCKED.
- Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X.
- u_int64_t -> uint64_t
- add missing addr unlock for error return path
Approved by: re@freebsd.org (K Smith)
additional flags to many function calls. The flags only
get used in BSD when we compile with lock testing. These
flags allow apple to escape the "giant" lock it holds on
the socket and have more fine-grained locking in the NKE.
It also allows us to test (with witness) the locking used
by apple via a compile switch (manually applied).
Approved by: re@freebsd.org(B Mah)
when peer acks the add in case the routing table changes.
- Fix sctp_lower_sosend to send shutdown chunk for mbuf send
case when sndlen = 0 and sinfoflag = SCTP_EOF
- Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data,
So that it does not send the "null" data mbuf out and cause
it to get freed twice.
- Fix so auto-asconf sysctl actually effect the socket's asconf state.
- Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets.
- Memset bug in sctp_output.c (arguments were reversed) submitted
found and reported by Dave Jones (davej@codemonkey.org.uk).
- PD-API point needs to be invoked >= not just > to conform to socket api
draft this fixes sctp_indata.c in the two places need to be >=.
- move M_NOTIFICATION to use M_PROTO5.
- PEER_ADDR_PARAMS did not fail properly if you specify an address
that is not in the association with a valid assoc_id. This meant
you got or set the stcb level values instead of the destination
you thought you were going to get/set. Now validate if the
stcb is non-null and the net is NULL that the sa_family is
set and the address is unspecified otherwise return an error.
- The thread based iterator could crash if associations were freed
at the exact time it was running. rework the worker thread to
use the increment/decrement to prevent this and no longer use
the markers that the timer based iterator uses.
- Fix the memleak in sctp_add_addr_to_vrf() for the case when it is
detected that ifa is already pointing to a ifn.
- Fix it so that if someone is so insane that they drop the
send window below the minimal add mark, they still can send.
- Changed all state for associations to use mask safe macro.
- During front states in association freeing in sctp_inpcbfree, we
had a locking problem where locks were not in place where they
should have been.
- Free association calls were not testing the return value in
sctp_inpcb_free() properly... others should be cast void returns
where we don't care about the return value.
- If a reference count is held on an assoc, even from the "force free"
we should not do the actual free.. but instead let the timer
free it.
- When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED
flag is set, we must NOT process the packet but handle it like
ootb. This is because while freeing an assoc we release the
locks to get all the higher order locks so we can purge all
the hash tables. This leaves a hole if a packet comes in
just at that point. Now sctp_common_input_processing() will
call the ootb code in such a case.
- Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes
it so we don't have a conflict (I think this is a covertity change).
We made this change AFTER some conversation and looking to make sure
that M_PROTO5 does not have a problem between SCTP and the 802.11
stuff (which is the only other place its used).
- Fixed lock order reversal and missing atomic protection around
locked_tcb during association lookup and the 1-2-1 model.
- Added debug to source address selection.
- V6 output must always do checksum even for loopback.
- Remove more locks around inp that are not needed for an atomically
added/subtracted ref count.
- slight optimization in the way we zero the array in sctp_sack_check()
- It was possible to respond to a ABORT() with bad checksum with
a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT
send a PKT-DROP to any ABORT().
- Add an option for local logging (useful for macintosh or when
you need better performing during debugging). Note no commands
are here to get the log info, you must just use kgdb.
- The timer code needs to be aware of if it needs to call
sctp_sack_check() to slide the maps and adjust the cum-ack.
This is because it may be out of sync cum-ack wise.
- Added threshold managment logging.
- If the user picked just the right size, that just filled the send
window minus one mtu, we would enter a forever loop not copying and
at the same time not blocking. Change from < to <= solves this.
- Sysctl added to control the fragment interleave level which defaults
to 1.
- My rwnd control was not being used to control the rwnd properly (we
did not add and subtract to it :-() this is now fixed so we handle
small messages (1 byte etc) better to bring our rwnd down more
slowly.
Approved by: re@freebsd.org (Bruce Mah)
- remove duplicate #include <sys/priv.h> that is not under
#ifdef FreeBSD version to allow compile on 6.1
- static analysis changes per the cisco SA tool including:
o some SA_IGNORE comments
o some checks for NULL before unlock.
o type corrections int -> size_t
- Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this
we pass a NULL in to bind on implicit assoc setup and crash :-(
Approved by: re@freebsd.org(Ken Smith)
- use proper tick gathering macro instead of ticks directly.
- Placed reasonable boundaries on sets that a user can do
that are converted to ticks from ms.
- Fix CMT_PF to always check to be sure CMT is on.
- Fix ticks use of CMT_PF.
- put back code to allow asconfs to be queued while INITs are in flight
and before the assoc is established.
- During window probes, an ack'd packet might be left with the window
probe mark on it causing it to be retransmitted. Change so that
the flight decrease macro clears the window_probe mark.
- Additional logging flight size/reading and ASOC LOG. This
is only enabled if you manually insert things into opt_sctp.h
since its a set of debug code only.
- Found an interesting SMP race in the way data was appended which
could cause a reader to lose a part of a message, had to
reorder when we marked the message was complete to after
the data was appended.
- bug in ADD-IP for the subset bound socket case when the peer has only
one address
- fix ASCONF implicit success/error handling case
- proper support of jails in Freebsd 6>
- copy out the timeval for the 64 bit sparc world on cookie-echo
alignment error crashes without this).
Approved by: re(Ken Smith)
This commit includes only the kernel files, the rest of the files
will follow in a second commit.
Reviewed by: bz
Approved by: re
Supported by: Secure Computing
- Fix so VRF's will clean themselves up when no references are around.
- Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass
normal validation checks.
- turn auto-asconf off for subset bound sockets
- Moves all logging to use KTR. This gets rid of most
of the logging #ifdef's with a few exceptions reducing
the number of config options for SCTP.
but are a seperate call that can be re-used if needed.
- 64 bit issues
o re-arrange cookie so it is better 64 bit aligned
o For wire level things we need the packed attribute.
default_vrf_id
- Missing lock/unlock of inp added as well in the v6 side.
- IFN hash table moves to sctppcbinfo since indexes are
unique across systems (including different VRFs) this makes it easier
to do ifn lookups.
concept that is NOT well thought out for a multi-homed transport
protocol. So the useless table-id entries passed around need to
be removed.
- Add a event timer for the zero copy api.
- Fix a bug in sctp_timer.c when searching for an alternate
with the largest ssthresh (the compare was wrong).
is expanded, size of expansion was not taken int consideration.
- Fix so vtag hash is 1 bigger so that it modulo's out
correctly, avoids a panic when restart with right modulo happens.
- do not dereference stcb when control->do_not_ref_stcb is set
- Fix up packet logging to not often use a lock and also to
add to options.
- Fix some logging option duplication in the sctputil.h
hold a wq lock for the iterator. Panda uses a
silly recursive lock they hold through the timer.
- Add poor mans wireshark compile option..
- Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls.
- sysctl now will get back the refcnt for viewing by onlookers.
Reviewed by: gnn
- All printf that was surrounded by #ifdef SCTP_DEBUG moves to
a macro that does all of this. This removes all printfs from
the code and makes the code more portable and easier to
read.
- Static Analysis (cisco) - found a few bugs, but mostly we
add checks for NULL pointers and such to make the tool
happy. We now pass the Cisco SA tools checks except for
where it does not understand tailq/lists. We still need
to look at the coverity tools output too (this is like
the cisco SA tool) and see if it wants us to fix any other
items. Hopefully this will be the last major churn in the
code other than bug fixes.
- PR-SCTP would ignore FWD-TSN's above a rwnd's worth
of TSN's (1 byte msgs).. this left the peer hopelessly
out of sync.. or an attacker. So now we abort the assoc.
- New IFN hash, also rename hashes to match addr/ifn now
that the vrf has multiple.
- Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default
as defined in the Socket API ID.
- Export MTU information via sysctl.
- Vrf's need table id's. This is default for
BSD, but may be other things later when BSD
fully supports VRFs.
- Additional stream reset bug (caught by cisco dev-test).
- Additional validations for the address in sending a message (socket api).
-------- and -----
- Fix association notifications not to give the active open
side false notifications.
- Fix so sendfile and SENDALL will work properly (missing
flag to say socket sender is done).
- Fix Bug that prevented COOKIES from being retransmitted.
- Break out connectx into helper sub-models so that iox routines can
reuse the helpers.
- When an address is added during system init (non-dynamic mode) make
sure that the "defer use" flag is not set.
** its compiling on XR now :-D **
Reviewed by: gnn
set/clear it but would not do it. Now we will.
- Moved to latest socket api for extended sndrcv info struct.
- Moved to support all new levels of fragment interleave (0-2).
- Codenomicon security test updates - length checks and such.
- Bug in stream reset (2 actually).
- setpeerprimary could unlock a null pointer, fixed.
- Added a flag in the pcb so netstat can see if we are listening easier.
Obtained from: (some of the Listen changes from Weongyo Jeong)
- fixed a refcount bug in the new ifa structures.
- use vrf's from default stcb or inp whenever possible.
- Address limits raised to account for a full IP fragmented
packet (1000 addresses).
- flight size correcting updated to include one message only
and to handle case where the peer does not cumack the
next segment aka lists 1/1 in sack blocks..
- Various bad init/init-ack handling could cause a panic
since we tried to unlock the destroyed mutex. Fixes
so we properly exit when we need to destroy an assoc.
(Found by Cisco DevTest team :D)
- name rename in src-addr-selection from pass to sifa.
- route structure typedef'd to allow different platforms
and updated into sctp_os_bsd file.
- Max retransmissions a chunk can be made added.
Reviewed by: gnn
incorrect, non-bundlable fragmentation.
- Added min residual to better control split points for
both how big a msg must be as well as how much needs
to be left over.
- With our new algo in place, we need to implicitly
set "end of msg" on the sp-> structure otherwise we
end up with "hung" associations.
- Room reserved up front in IP header by pushing IP
header to back of mbuf.
- Fix so FR's peg count of retransmissions needed.
- Fix so an unlucky chunk that never gets across
will kill the assoc via the kill timer and send an
abort too.
- Fix bug in sctp_input which can result in a crash.
- Do not strip off IP options anymore.
- Clean up sctp_calculate_rto().
- Get rid of unused sysctl.
- Fixed so we discard all M-Cast
- Fixed so port check done AFTER checksum
- Fixed bug in fragmentation code that prevented
us from fragmenting a small complete message when
we needed to.
- Window probes were not marked back to unsent and
flight adjusted when a sack came in with no
window change or accepting of the probe data.
We now fix this with having a mark on the net and
the chunk so we can clear it out when the sack arrives
forcing it to retran just like it was "new" this
improves the handling of window probes, which were
dropped by the receiver.
- Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
shutdown which caused extra abort from peer.
- RTT time calculation was not being done in
express sack handling since it refered to an unused
variable (rto_pending). Removed variable.
- socket buffer high water access macro-ized.
on a per VRF basis (BSD has only one VRF currently).
Hash table is sized to 16 but may need to be adjusted
for machines with large numbers of addresses.
Reviewed by: gnn
- SB_CLEAR macro defined and used for sb clearing.
- Fix for CMT express_sack_handling did not do proper
pseudo-cumack updates.
- Get rid of extraneous function that was never used ip_2_ip6_hdr()
- Fixed source address selection bug (initialization problem).
- Source address selection debug added.
- moved away from ifn/ifa access to sctp_ifa/sctp_ifn
built and managed by the add-ip code.
- cleaned up add-ip code to use the iterator
- made iterator be a thread, which enables auto-asconf now.
- rewrote and cleaned up source address selection (also
made it use new structures).
- Fixed a couple of memory leaks.
- DACK now settable as to how many packets to delay as
well as time.
- connectx() to latest socket API, new associd arg.
- Fixed issue with revoking and loosing potential to
send when we inflate the flight size. We now inflate
the cwnd too and deflate it later when the revoked
chunk is sent or acked.
- Got rid of some temp debug code
- src addr selection moved to a common file (sctp_output.c)
- Support for simple VRF's (we have support for multi-vfr
via compile switch that is scrubbed from BSD but we won't
need multi-vrf until we first get VRF :-D)
- Rest of mib work for address information now done
- Limit number of addresses in INIT/INIT-ACK to
a #def (30).
Reviewed by: gnn
- ZONE get now also take a type cast so it does the
cast like mtod does.
- New macro SCTP_LIST_EMPTY, which in bsd is just
LIST_EMPTY
- Removal of const in some of the static hmac functions
(not needed)
- Store length changes to allow for new fields in auth
- Auth code updated to current draft (this should be the
RFC version we think).
- use uint8_t instead of u_char in LOOPBACK address comparison
- Some u_int32_t converted to uint32_t (in crc code)
- A bug was found in the mib counts for ordered/unordered
count, this was fixed (was referencing a freed mbuf).
- SCTP_ASOCLOG_OF_TSNS added (code will probably disappear
after my testing completes. It allows us to keep a
small log on each assoc of the last 40 TSN's in/out and
stream assignment. It is NOT in options and so is only
good for private builds.
- Some CMT changes in prep for Jana fixing his problem
with reneging when CMT is enabled (Concurrent Multipath
Transfer = CMT).
- Some missing mib stats added.
- Correction to number of open assoc's count in mib
- Correction to os_bsd.h to get right sha2 macros
- Add of special AUTH_04 flags so you can compile the code
with the old format (in case the peer does not yet support
the latest auth code).
- Nonce sum was incorrectly being set in when ecn_nonce was
NOT on.
- LOR in listen with implicit bind found and fixed.
- Moved away from using mbuf's for socket options to using
just data pointers. The mbufs were used to harmonize
NetBSD code since both Net and Open used this method. We
have decided to move away from that and more conform to
FreeBSD style (which makes more sense).
- Very very nasty bug found in some of my "debug" code. The
cookie_how collision case tracking had an endless loop in
it if you got a second retransmission of a cookie collision
case. This would lock up a CPU .. ugly..
- auth function goes to using size_t instead of int which
conforms to socketapi better
- Found the nasty bug that happens after 9 days of testing.. you
get the data chunk, deliver it and due to the reference to a ch->
that every now and then has been deleted (depending on the postion
in the mbuf) you have an invalid ch->ch.flags.. and thus you don't
advance the stream sequence number.. so you block the stream
permanently. The fix is to make local variables of these guys
and set them up before you have any chance of trimming the
mbuf.
- style fix in sctp_util.h, not sure how this got bad maybe in
the last patch? (aka it may not be in the real source).
- Found interesting bug when using the extended snd/rcv info where
we would get an error on receiving with this. Thats because
it was NOT padded to the same size as the snd_rcv info. We
increase (add the pad) so the two structs are the same size
in sctp_uio.h
- In sctp_usrreq.c one of the most common things we did for
socket options was to cast the pointer and validate the size.
This as been macro-ized to help make the code more readable.
- in sctputil.c two things, the socketapi class found a missing
flag type (the next msg is a notification) and a missing
scope recovery was also fixed.
Reviewed by: gnn
- Finally all splxx() are removed
- Count error fixed in mapping array which might
cause a wrong cumack generation.
- Invariants around panic for case D + printf when no invariants.
- one-to-one model race condition fixed by using
a pre-formed connection and then completing the
work so accept won't happen on a non-formed
association.
- Some additional paranoia checks in sctp_output.
- Locks that were missing in the accept code.
Approved by: gnn
- Added a short time wait (not used yet) constant
- Corrected the type of the crc32c table (it was
unsigned long and really is a uint32_t
- Got rid of the user of MHeaders until they
are truely needed by lower layers.
- Fixed an initialization problem in the readq structure
(ordering was off).
- Found yet another collision bug when the random number
generator returns two numbers on one side (during a collision)
that are the same. Also added some tracking of cookies
that will go away when we know that we have the last collision
bug gone.
- Fixed an init bug for book_size_scale, that was causing
Early FR code to run when it should not.
- Fixed a flight size tracking bug that was associated with
Early FR but due to above bug also effected all FR's
- Fixed it so Max Burst also will apply to Fast Retransmit.
- Fixed a bug in the temporary logging code that allowed a
static log array overflow
- hashinit_flags is now used.
- Two last mcopym's were converted to the macro sctp_m_copym that
has always been used by all other places
- macro sctp_m_copym was converted to upper case.
- We now validate sinfo_flags on input (we did not before).
- Fixed a bug that prevented a user from sending data and immediately
shuting down with one send operation.
- Moved to use hashdestroy instead of free() in our macros.
- Fixed an init problem in our timed_wait vtag where we
did not fully initialize our time-wait blocks.
- Timer stops were re-positioned.
- A pcb cleanup method was added, however this probably will
not be used in BSD.. unless we make module loadable protocols
- I think this fixes the mysterious timer bug.. it was a
ordering of locks problem in the way we did timers. It
now conforms to the timeout(9) manual (except for the
_drain part, we had to do this a different way due
to locks).
- Fixed error return code so we get either CONNREUSED or CONNRESET
depending on where one is in progression
- Purged an unused clone macro.
- Fixed a read erro code issue where we were NOT getting the proper
error when the connection was reset.
- Purged an unused clone macro.
- Fixed a read erro code issue where we were NOT getting the proper
error when the connection was reset.
Approved by: gnn
access plus timers. This makes the code
more portable and able to change out the
mbuf or timer system used more easily ;-)
b) removal of all use of pkt-hdr's until only
the places we need them (before ip_output routines).
c) remove a bunch of code not needed due to <b> aka
worrying about pkthdr's :-)
d) There was one last reorder problem it looks where
if a restart occur's and we release and relock (at
the point where we setup our alias vtag) we would
end up possibly getting the wrong TSN in place. The
code that fixed the TSN's just needed to be shifted
around BEFORE the release of the lock.. also code that
set the state (since this also could contribute).
Approved by: gnn
2) Fix all "magic numbers" to be constants.
3) A collision case that would generate two associations to
the same peer due to a missing lock is fixed.
4) Added tracking of where timers are stopped.
Approved by: gnn
inserted a few to the new files.. but I falied to
add the #include <sys/cdef.h>
Which causes a compile error.. sorry about that... got it
now :-)
Approved by:gnn
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.comtuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0
So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.
I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)
There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..
If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)
Reviewed by: gnn
Approved by: gnn
