hash was computed and the time that the superblock was copied to a
buffer to be written to disk. The result was a failed superblock
check hash the next time that the superblock was read.
The fix is to compute the check hash after the superblock has been
copied to a buffer to be written.
PR: 236504
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: Netflix
disk blocks, set the FORCE flag in the call to chkiq() or chkdq() since
the user is always allowed to return resources and hence there is no need
to check the user's credential .
Reported by: Christopher Krah, Thomas Barabosch, and Jan-Niclas Hilgert of Fraunhofer FKIE
Reported as: FS-1-UFS-1: Denial Of Service in mount (prison_priv_check)
Discussed with: kib
MFC: 1 week
Sponsored by: Netflix
filesystems that have block pointers that are out-of-range for their
filesystem. These out-of-range block pointers are corrected by
fsck(8) so are only encountered when an unchecked filesystem is
mounted.
A new "untrusted" flag has been added to the generic mount interface
that can be set when mounting media of unknown provenance or integrity.
For example, a daemon that automounts a filesystem on a flash drive
when it is plugged into a system.
This commit adds a test to UFS/FFS that validates all block numbers
before using them. Because checking for out-of-range blocks adds
unnecessary overhead to normal operation, the tests are only done
when the filesystem is mounted as an "untrusted" filesystem.
Reported by: Christopher Krah, Thomas Barabosch, and Jan-Niclas Hilgert of Fraunhofer FKIE
Reported as: FS-14-UFS-3: Out of bounds read in write-2 (ffs_alloccg)
Reviewed by: kib
Sponsored by: Netflix
filesystem full message is sent to the offending process or the
kernel log if the offending process cannot be identified.
To prevent an explotion of messages, the kernel ppsratecheck()
function is used to limit the messages to one per second. This
revision changes the variable that tracks the rate of these messages
from a systemwide limit to a per-filesystem limit by moving it from
a global variable to a variable in the ufsmount structure.
Suggested by: kib
Reviewed by: kib
Sponsored by: Netflix
is to notify the kernel that the file system is untrusted and it
should use more extensive checks on the file-system's metadata
before using it. This option is intended to be used when mounting
file systems from untrusted media such as USB memory sticks or other
externally-provided media.
It will initially be used by the UFS/FFS file system, but should
likely be expanded to be used by other file systems that may appear
on external media like msdosfs, exfat, and ext2fs.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20786
Assert that the per-mountpoint softdep mutex is held in modified
functions that do not already have this assertion. No functional
change intended.
Reviewed by: kib, mckusick (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20741
rename the source to gsb_crc32.c.
This is a prerequisite of unifying kernel zlib instances.
PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193
vtruncbuf takes a "struct ucred*" argument. AFAICT, it's been unused ever
since that function was first added in r34611. Remove it. Also, remove some
"struct ucred" arguments from fuse and nfs functions that were only used by
vtruncbuf.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20377
Similar to r348026, exhaustive search for uses of CTRn() and cross reference
ktr.h includes. Where it was obvious that an OS compat header of some kind
included ktr.h indirectly, .c files were left alone. Some of these files
clearly got ktr.h via header pollution in some scenarios, or tinderbox would
not be passing prior to this revision, but go ahead and explicitly include it
in files using it anyway.
Like r348026, these CUs did not show up in tinderbox as missing the include.
Reported by: peterj (arm64/mp_machdep.c)
X-MFC-With: r347984
Sponsored by: Dell EMC Isilon
In particular, ensure that writers are not unleashed before SU
structures are initialized. Also, correctly handle MNT_ASYNC before
this.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the file associated with the given file descriptor.
Reviewed by: kib, asomers
Reviewed by: cem, jilles, brooks (they reviewed previous version)
Discussed with: pjd, and many others
Differential Revision: https://reviews.freebsd.org/D14567
This bug was introduced with the change to use softdep_bp_to_mp()
in January 2018 changes -r327723 and -r327821. The softdep_bp_to_mp()
function failed to include VSOCK as one of the valid cases.
Although local-domain sockets do not allocate blocks in the filesystem,
they will allocate blocks if they use extended attributes (such as
ACLs). Thus, softdep_bp_to_mp() needs to return a non-NULL mount
pointer when presented with a socket vnode so that the soft updates
write complete will properly process the soft updates structures
associated with the extended attribute blocks. It was the failure
to process these soft updates structures, thus leaving them hanging
off the buffer, which lead to the "panic: softdep_deallocate_dependencies:
dangling deps" when trying to clean up the buffer after it was written.
PR: 230962
Reported by: 2t8mr7kx9f@protonmail.com
Reviewed by: kib
Tested by: Peter Holm
MFC after: 1 week
Sponsored by: Netflix
Implement ffs_getpages_async(), which when possible calls the asynchronous
flavor of the generic pager's getpages function. When the underlying
block size is larger than the system page size, however, it will invoke
the (synchronous) buffer cache pager, followed by a call to the client
completion routine. This retains true asynchronous completion in the most
common (block size <= page size) case, which is important for the performance
of the new sendfile(2). The behavior in the larger block size case mirrors
the default implementation of VOP_GETPAGES_ASYNC, which most other
filesystems use anyway as they do not override the getpages_async method.
PR: 235708
Reported by: pho
Reviewed by: kib, glebius
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19340
shorter than its size resulting in a hole as its final block (which
is a violation of the invarients of the UFS filesystem).
Soft updates will always ensure that the file size is correct when
writing inodes to disk for files that contain only direct block
pointers. However soft updates does not roll back sizes for files
with indirect blocks that it has set to unallocated because their
contents have not yet been written to disk. Hence, the file can
appear to have a hole at its end because the block pointer has been
rolled back to zero when its inode was written to disk. Thus,
fsck_ffs calculates the last allocated block in the file. For files
that extend into indirect blocks, fsck_ffs checks for a size past
the last allocated block of the file and if that is found, shortens
the file to reference the last allocated block thus avoiding having
it reference a hole at its end.
Submitted by: Chuck Silvers <chs@netflix.com>
Tested by: Chuck Silvers <chs@netflix.com>
MFC after: 1 week
Sponsored by: Netflix
January 2018 changes -r327723 and -r327821. The softdep_bp_to_mp()
function failed to include VFIFO as one of the valid cases.
Although fifo's do not allocate blocks in the filesystem, they will
allocate blocks if they use extended attributes (such as ACLs). Thus,
softdep_bp_to_mp() needs to return a non-NULL mount pointer when
presented with a fifo vnode so that the soft updates write complete
will properly process the soft updates structures associated with the
extended attribute blocks. It was the failure to process these soft
updates structures, thus leaving them hanging off the buffer, which
lead to the "panic: softdep_deallocate_dependencies: dangling deps"
when trying to clean up the buffer after it was written.
PR: 230962
Reported by: 2t8mr7kx9f@protonmail.com
Reviewed by: kib
Tested by: Peter Holm
MFC after: 1 week
Sponsored by: Netflix
set of known soft dependency data structures now includes: sd_worklist,
sd_inodedep, sd_allocdirect, sd_allocindir, and sd_mkdir. DDB can
also print lists of sd_allinodedeps, sd_mkdir_list, and sd_workhead.
The sd_workhead script is useful for listing all the dependencies
associated with a buffer, e.g. bp->b_dep.
Prefix the soft dependency show names with sd_ so that they sort
together when listed by DDB's "show help" and to distinguish them
from other data structures printable by DDB.
Sponsored by: Netflix
o In vm_pager_bufferinit() create pbuf_zone and start accounting on how many
pbufs are we going to have set.
In various subsystems that are going to utilize pbufs create private zones
via call to pbuf_zsecond_create(). The latter calls uma_zsecond_create(),
and sets a limit on created zone. After startup preallocate pbufs according
to requirements of all pbuf zones.
Subsystems that used to have a private limit with old allocator now have
private pbuf zones: md(4), fusefs, NFS client, smbfs, VFS cluster, FFS,
swap, vnode pager.
The following subsystems use shared pbuf zone: cam(4), nvme(4), physio(9),
aio(4). They should have their private limits, but changing that is out of
scope of this commit.
o Fetch tunable value of kern.nswbuf from init_param2() and while here move
NSWBUF_MIN to opt_param.h and eliminate opt_swap.h, that was holding only
this option.
Default values aren't touched by this commit, but they probably should be
reviewed wrt to modern hardware.
This change removes a tight bottleneck from sendfile(2) operation, that
uses pbufs in vnode pager. Other pagers also would benefit from faster
allocation.
Together with: gallatin
Tested by: pho
vnodeops make FFS1's fifoops1 use ffs_lock. Also delete ffs_reallocblks
from fifoops1 which is needed only for fifoops2 because of its
support for extended attributes that need to allocate blocks.
Suggested by: kib
If invalid, return EINVAL. Note that inode check-hashes greatly
reduce the chance that these errors will go undetected.
Reported by: Christopher Krah <krah@protonmail.com>
Reported as: FS-5-UFS-2: Denial Of Service in nmount-3 (ffs_read)
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
M sys/fs/ext2fs/ext2_vnops.c
M sys/kern/vfs_subr.c
M sys/ufs/ffs/ffs_snapshot.c
M sys/ufs/ufs/ufs_vnops.c
The vnode is not opened, so it ends up with the malloced buffers otherwise.
Reported and tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
the check-hash fails. Prior to the fix in -r342133 the inode with the
zeroed out check-hash was written back to disk causing further confusion.
Reported by: Gary Jennejohn (gj)
Sponsored by: Netflix
before copying in the inode so that the mode and link-count are not set
if the check-hash fails. This change ensures that the vnode will be properly
unwound and recycled rather than being held in the cache.
Initialize the file mode is zero so that if the loading of the inode
fails (for example because of a check-hash failure), the vnode will be
properly unwound and recycled.
Reported by: Gary Jennejohn (gj)
Sponsored by: Netflix
"panic: softdep_update_inodeblock: bad link count" when releasing
a partially initialized vnode after an inode check-hash failure.
Reported by: Gary Jennejohn <gljennjohn@gmail.com>
Reported by: Peter Holm (pho)
Sponsored by: Netflix
check hash to the filesystem inodes. Access attempts to files
associated with an inode with an invalid check hash will fail with
EINVAL (Invalid argument). Access is reestablished after an fsck
is run to find and validate the inodes with invalid check-hashes.
This check avoids a class of filesystem panics related to corrupted
inodes. The hash is done using crc32c.
Note this check-hash is for the inode itself and not any of its
indirect blocks. Check-hash validation may be extended to also
cover indirect block pointers, but that will be a separate (and
more costly) feature.
Check hashes are added only to UFS2 and not to UFS1 as UFS1 is
primarily used in embedded systems with small memories and low-powered
processors which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
deletion is active, specifically after a call to ffs_blkrelease_start()
but before the call to ffs_blkrelease_finish(), ffs_blkrelease_start()
will have handed out SINGLETON_KEY rather than starting a collection
sequence. Thus if we get a SINGLETON_KEY passed to ffs_blkrelease_finish(),
we just return rather than trying to finish the nonexistent sequence.
Reported by: Warner Losh (imp@)
Sponsored by: Netflix
superblock has a check-hash error, an error message noting the
superblock check-hash failure is printed and the mount fails. The
administrator then runs fsck to repair the filesystem and when
successful, the filesystem can once again be mounted.
This approach fails if the filesystem in question is a root filesystem
from which you are trying to boot. Here, the loader fails when trying
to access the filesystem to get the kernel to boot. So it is necessary
to allow the loader to ignore the superblock check-hash error and make
a best effort to read the kernel. The filesystem may be suffiently
corrupted that the read attempt fails, but there is no harm in trying
since the loader makes no attempt to write to the filesystem.
Once the kernel is loaded and starts to run, it attempts to mount its
root filesystem. Once again, failure means that it breaks to its prompt
to ask where to get its root filesystem. Unless you have an alternate
root filesystem, you are stuck.
Since the root filesystem is initially mounted read-only, it is
safe to make an attempt to mount the root filesystem with the failed
superblock check-hash. Thus, when asked to mount a root filesystem
with a failed superblock check-hash, the kernel prints a warning
message that the root filesystem superblock check-hash needs repair,
but notes that it is ignoring the error and proceeding. It does
mark the filesystem as needing an fsck which prevents it from being
enabled for writing until fsck has been run on it. The net effect
is that the reboot fails to single user, but at least at that point
the administrator has the tools at hand to fix the problem.
Reported by: Rick Macklem (rmacklem@)
Discussed with: Warner Losh (imp@)
Sponsored by: Netflix
predates metadata check hashes so that it is done before deciding
whether to compute a check-hash of the superblock.
Reported by: Rick Macklem <rmacklem@uoguelph.ca>
Sponsored by: Netflix
This corrects a bug that prevented snapshots from being mounted due to a
superblock check-hash failure.
Reported by: Brennan Vincent <brennan@umanwizard.com>
Tested by: Peter Holm (pho@)
Sponsored by: Netflix
document the libufs interface for fetching and storing inodes.
The undocumented getino / putino interface has been replaced
with a new getinode / putinode interface.
Convert the utilities that had been using the undocumented
interface to use the new documented interface.
No functional change (as for now the libufs library does not
do inode check-hashes).
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
Flags prevent open(2) and *at(2) vfs syscalls name lookup from
escaping the starting directory. Supposedly the interface is similar
to the same proposed Linux flags.
Reviewed by: jilles (code, previous version of manpages), 0mp (manpages)
Discussed with: allanjude, emaste, jonathan
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D17547
check hash to the superblock. If a check hash fails when an attempt
is made to mount a filesystem, the mount fails with EINVAL (Invalid
argument). This avoids a class of filesystem panics related to
corrupted superblocks. The hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
found that performance was no worse and usually better when running
with TRIM consolidation. Performance improvement was most noticable
when multiple large files are released in a short period of time.
Thus, TRIM consolidation is being enabled by default. Should
operational problems be found, it can be disabled using the command
`sysctl vfs.ffs.dotrimcons=0'. This variable can also be set as a
tunable if early disabling is necessary.
Approved by: re (gjb)
Sponsored by: Netflix
given in random(4).
This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.
Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.
PR: 230870
Reviewed by: cem
Approved by: so(delphij,gtetlow)
Approved by: re(marius)
Differential Revision: https://reviews.freebsd.org/D16898
blocks of a file as contiguously as possible. Since the filesystem
does not know how large a file will grow when it is first being
written, it initially places the file in a set of blocks in which
it currently fits. As it grows, it is relocated to areas with
larger contiguous blocks. In this way it saves its large contiguous
sets of blocks for the files that need them and thus avoids
unnecessaily fragmenting its disk space.
We used to skip reallocating the blocks of a file into a contiguous
sequence if the underlying flash device requested BIO_DELETE
notifications, because devices that benefit from BIO_DELETE also
benefit from not moving the data. However, in the algorithm described
above that reallocates the blocks, the destination for the data is
usually moved before the data is written to the initially allocated
location. So we rarely suffer the penalty of extra writes. With
the addition of the consolodation of contiguous blocks into single
BIO_DELETE operations, having fewer but larger contiguous blocks
reduces the number of (slow and expensive) BIO_DELETE operations.
So when doing BIO_DELETE consolodation, we do block reallocation.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
When deleting files on filesystems that are stored on flash-memory
(solid-state) disk drives, the filesystem notifies the underlying
disk of the blocks that it is no longer using. The notification
allows the drive to avoid saving these blocks when it needs to
flash (zero out) one of its flash pages. These notifications of
no-longer-being-used blocks are referred to as TRIM notifications.
In FreeBSD these TRIM notifications are sent from the filesystem
to the drive using the BIO_DELETE command.
Until now, the filesystem would send a separate message to the drive
for each block of the file that was deleted. Each Gigabyte of file
size resulted in over 3000 TRIM messages being sent to the drive.
This burst of messages can overwhelm the drive's task queue causing
multiple second delays for read and write requests.
This implementation collects runs of contiguous blocks in the file
and then consolodates them into a single BIO_DELETE command to the
drive. The BIO_DELETE command describes the run of blocks as a
single large block being deleted. Each Gigabyte of file size can
result in as few as two BIO_DELETE commands and is typically less
than ten. Though these larger BIO_DELETE commands take longer to
run, they do not clog the drive task queue, so read and write
commands can intersperse effectively with them.
Though this new feature has been throughly reviewed and tested, it
is being added disabled by default so as to minimize the possibility
of disrupting the upcoming 12.0 release. It can be enabled by running
``sysctl vfs.ffs.dotrimcons=1''. Users are encouraged to test it.
If no problems arise, we will consider requesting that it be enabled
by default for 12.0.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
driven by problems found with the algorithms being tested for TRIM
consolodation.
Reported by: Peter Holm
Suggested by: kib
Reviewed by: kib
Sponsored by: Netflix
a smaller number of larger TRIM requests. The hope had been to have
the full TRIM consolodation in place for 12.0, but the algorithms
are still under development and need further testing. With this
framework in place it will be possible to easily add TRIM consolodation
once the optimal strategy has been found.
The only functional change with this patch is the elimination of TRIM
requests for blocks that are freed before they have been likely to
have been written.
Reviewed by: kib
Discussed with: Warner Losh and Chuck Silvers
Sponsored by: Netflix
(incorrectly) called while another suspension is already active.
PR: 230220
Reported by: dexuan
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
