The sbp_cam_detach_target can be called from sbp_post_explore function
on the first target that is not really attached and it was written with
the corresponding safety check in place to tolerate that. Unfortunately
the recent locking cleanup did add a locking assertion that tries to
dereference the target->sbp pointer unconditionally, which causes less
than desirable outcome. Since the assertion is useful, just initialize
the target sbp pointer once when sbp device is being initialized instead
of when the target is being attached. This makes assertion work in all
cases and fixes the crash on boot.
performing cpuid calls.
Add also a new way to specify the level type to cpucontrol(8) as
reported in the manpage.
Sponsored by: EMC / Isilon storage division
Reviewed by: bdrewery, gcooper
Testerd by: bdrewery
instead of trying to cache it.
Previously, we only trusted the state if we did not have a cached state.
However, once a state was cached, the _STA method was always ignored.
Specifically, once a power resource had been turned on once (e.g.
during resume), the driver assumed it was always on even if _STA said it
was off and never turned it back on. This prevented the power resource
from being turned back on if a laptop was resumed twice, for example.
To fix, just remove the cached state entirely and always use the results
of _STA. The loops already skip any resources where _STA fails.
Submitted by: trasz (initial patch to invoke _ON)
MFC after: 1 week
- Don't compare the DMA map to NULL to determine if bus_dmamap_unload()
should be called when releasing a static allocation. Instead, compare
the bus address against 0.
- Don't assume that the DMA map for static allocations is NULL. Instead,
save the value set by bus_dmamem_alloc() so it can later be passed to
bus_dmamem_free(). Also, add missing calls to bus_dmamap_unload() in
these cases before freeing the buffer.
- Use the bus address from the bus_dma callback instead of calling
vtophys() on the address allocated by bus_dmamem_alloc().
Reviewed by: kan
- Add missing calls to bus_dmamap_unload() in et(4).
- Check the bus address against 0 to decide when to call
bus_dmamap_unload() instead of comparing the bus_dma map against NULL.
- Check the virtual address against NULL to decide when to call
bus_dmamem_free() instead of comparing the bus_dma map against NULL.
- Don't clear bus_dma map pointers to NULL for static allocations.
Instead, treat the value as completely opaque.
- Pass the correct virtual address to bus_dmamem_free() in wpi(4) instead
of trying to free a pointer to the virtual address.
Reviewed by: yongari
the queue where to enqueue pages that are going to be unwired.
- Add stronger checks to the enqueue/dequeue for the pagequeues when
adding and removing pages to them.
Of course, for unmanaged pages the queue parameter of vm_page_unwire() will
be ignored, just as the active parameter today.
This makes adding new pagequeues quicker.
This change effectively modifies the KPI. __FreeBSD_version will be,
however, bumped just when the full cache of free pages will be
evicted.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
Tested by: pho
Switch the initialization of gnttab to use an unused physical memory
range for both PVHVM and PVH.
In the past PVHVM was using the xenpci BAR, but there's no reason to
do that, and in fact FreeBSD was probably doing it because it was the
way it was done in Windows, were drivers cannot probably request for
unused physical memory ranges, but it was never enforced in the
hypervisor.
Sponsored by: Citrix Systems R&D
Approved by: gibbs
xen/gnttab.c:
- Allocate contiguous physical memory for grant table frames for both
PVHVM and PVH.
- Since gnttab is not a device, use the xenpv device in order to
request for this allocation.
dev/xen/xenpci/xenpcivar.h:
dev/xen/xenpci/xenpci.c:
- Remove the now unused xenpci_alloc_space and xenpci_alloc_space_int
functions.
xen/gnttab.h:
- Change the prototype of gnttab_init and gnttab_resume, that now
takes a device_t parameter.
dev/xen/control/control.c:
x86/xen/xenpv.c:
- Changes to accomodate the new prototype of gnttab_init and
gnttab_resume.
Add the PV shutdown hook to PVH.
Sponsored by: Citrix Systems R&D
Approved by: gibbs
dev/xen/control/control.c:
- Make xen_pv_shutdown_final available on XENHVM builds.
- Register the Xen PV shutdown hook for PVH guests.
Create a dummy bus so top level Xen devices can attach to it (instead
of attaching directly to the nexus). This allows to have all the Xen
related devices grouped under a single bus.
Sponsored by: Citrix Systems R&D
Approved by: gibbs
x86/xen/xenpv.c:
- Attach the xenpv bus when running as a Xen guest.
- Attach the ISA bus if needed, in order to attach syscons.
conf/files.amd6:
conf/files.i386:
- Include the xenpv.c file in the build of i386/amd64 kernels using
XENHVM.
dev/xen/console/console.c:
dev/xen/timer/timer.c:
xen/xenstore/xenstore.c:
- Attach to the xenpv bus instead of the Nexus.
dev/xen/xenpci/xenpci.c:
- Xen specific devices on PVHVM guests are no longer attached to the
xenpci device, they are instead attached to the xenpv bus, remove
the now unused methods.
The header structure consists of two 1-byte elements, but it must always
be describable by a single SG entry. Note for consistency, specify the
alignment everywhere, even if the structure has the appropriate natural
alignment since it contains a uint16_t.
Obtained from: DragonFlyBSD
MFC after: 1 week
These defines are applicable to userland too, but virtqueue.h contains
the kernel virtqueue interface, and is therefore not usable in userland.
Note that Linux places these defines in virtio_ring.h, but I don't want
the drivers including this header file to keep the VirtIO ring opaque to
everything but the virtqueue.
MFC after: 1 week
The eventual goal is to share this file with userland, so
remove the macro that is only specific for virtio_pci(4).
Instead, add the VIRTIO_PCI_CONFIG_OFF macro from Linux to
get the config size whether MSIX is enabled or not.
MFC after: 1 week
NULL to determine if bus_dmamap_unload() or bus_dmamem_free() should be
called. Instead, check the associated bus and virtual addresses.
- Don't clear static DMA maps to NULL.
Reviewed by: jfv
freeing them instead of after.
- Check the bus address of a static DMA buffer to decide if the associated
map should be unloaded.
- Don't try to destroy bus dma maps for static DMA buffers.
Reviewed by: davidcs
- Don't call xpt_free_path() in os_query_remove_device() and
always return TRUE.
- Update os_buildsgl() to support build logical SG table which
will be used by lower RAID module.
- Return CAM_SEL_TIMEOUTstatus for SCSIcommand failed as target
missing.
Many thanks to HighPoint for providing this driver update.
Submitted by: Steve Chang
Reviewed by: mav
MFC after: 3 days
In particular, don't check the value of the bus_dma map against NULL
to determine if either bus_dmamem_alloc() or bus_dmamap_load() succeeded.
Instead, assume that bus_dmamap_load() succeeeded (and thus that
bus_dmamap_unload() should be called) if the bus address for a resource
is non-zero, and assume that bus_dmamem_alloc() succeeded (and thus
that bus_dmamem_free() should be called) if the virtual address for a
resource is not NULL.
In many cases these bugs could result in leaks when a driver was detached.
Reviewed by: yongari
MFC after: 2 weeks
don't create a map before calling bus_dmamem_alloc() (such maps were
leaked). It is believed that the extra destroy of the map was generally
harmless since bus_dmamem_alloc() often uses special maps for which
bus_dmamap_destroy() is a no-op (e.g. on x86).
Reviewed by: scottl
shutdown by putting the former under !rebooting and turning the latter into
debug messages.
Reviewed by: hps
MFC after: 1 week
Sponsored by: Bally Wulff Games & Entertainment GmbH
- Use the existing vbus locks instead of Giant for the CAM sim lock.
- Use callout(9) instead of timeout(9).
- Mark the interrupt handler as MPSAFE.
- Don't attempt to pass data in the softc from probe() to attach().
Reviewed by: Steve Chang <ychang@highpoint-tech.com>
Assisted by: delphij
* The way rings are updated changed with the last API bump.
Also sync ->head when moving slots in netmap_sw_to_nic().
* Remove a crashing selrecord() call.
* Unclog the logic surrounding netmap_rxsync_from_host().
* Add timestamping to RX host ring.
* Remove a couple of obsolete comments.
Submitted by: Franco Fichtner
MFC after: 3 days
Sponsored by: Packetwerk
Apparently for VMware Fusion (and presumably VMware Workstation/Player
since the PR states TSO is broken there too, but I cannot test), the
TCP header pseudo checksum calculated should only include the protocol
(IPPROTO_TCP) value, not also the lengths as the stack does instead.
VMware ESXi seems to ignore whatever value is in the TCP header checksum,
and it is a bit surprising there is a different behavior between the
VMware products. And it is unfortunate that on ESXi we are forced to do
this extra bit of work.
PR: kern/185849
MFC after: 3 days
on USB HUBs by moving the code into the USB explore threads. The
deadlock happens because child devices of the USB HUB don't have the
expected reference count when called from outside the explore
thread. Only the HUB device itself, which the IOCTL interface locks,
gets the correct reference count.
MFC after: 3 days
- Revert r265427. It appears we are halting the DWC OTG host
controller schedule if we process events only at every SOF. When doing
split transactions we rely on that events are processed quickly and
waiting too long might cause data loss.
- We are not always able to meet the timing requirements of interrupt
endpoint split transactions. Switch from INTERRUPT to CONTROL endpoint
type for interrupt endpoint events until further, hence CONTROL
endpoint events are more relaxed, reducing the chance of data
loss. See comment in code for more in-depth explanation.
- Simplify TT scheduling.
MFC after: 3 days
- Remove double buffering interrupt and isochronous traffic via the
transaction translator. It can be avoided because the DWC OTG will
always delay the start split transactions for interrupt and
isochronous traffic, but will not delay the complete split
transactions, if we set the odd frame bit correctly.
- Need to check the transfer cache field in the device done function
to be sure all allocated channels are freed and not the transfer first
one. This seems to resolve the control endpoint transfer type quirk
which is now removed.
- Make sure any received data upon TX is dumped else RX path will
stop.
- Transmit isochronous data before receiving isochronous data as a
means to optimise the TT schedule.
- Implement a simple TT bandwidth scheduler.
- Cleanup use of old "td->error" variable.
- On interrupt IN traffic via the transaction translator we simply
ignore missed transfer opportunities and silently retry the
transaction upon next available time slot.
MFC after: 3 days
"Terminus BSD Console" is a derivative of Terminus that is provided
by Mr. Dimitar Zhekov under the 2-clause BSD license for use by the FreeBSD vt(4) console.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
- Properly align temporary buffer to 32-bit.
- Add an extra parenthesis to make expression clear.
- Range check the association ID received from hardware.
MFC after: 1 week
A similar fix should be applied to vmxnet, ixgbe, igb, i40e.
(some of them previously reported by Michael Tuexen)
Drivers using if_transmit are correct, and so are most of the
other drivers that reassing if_transmit.
Among other things, this bug causes panics when using netmap emulation
on top of generic drivers.
Approved by: bryanv
MFC after: 3 days
Core i7 and Westmere processors, the uncore PMC subsystem is
completely different from the uncore PMC on smaller versions of CPUs.
Disable existing uncore hwpmc code for EX, otherwise non-existing MSRs
are accessed.
The cores PMCs seems to be identical for non-EX and EX, according to
the SDM.
Reviewed by: davide, fabient
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
- The R92S_TCR register is an 8-bit register. Don't access it like a
16-bit register.
- Disable parsing the delete station event, due to many false events.
- Ensure that there is only one transfer queue for each endpoint, so
that packets transmitted don't get out of order.
MFC after: 1 week
o Always init locks and cv ASAP.
o Initialize driver-independent parts even if driver probing fail.
o Allow to call vt_upgrade anytime, for later loaded drivers.
o New window flag VWF_READY, to track if window already initialized.
Other updates:
o Pass vd as a cookie for kbd_allocate.
o Do not blank window on driver replacement.
Tested by: hselasky (RPi), emaste(VGA, EFIFB, KMS), me
MFC after: 7 days
Sponsored by: The FreeBSD Foundation
interface allows the ifnet structure to be defined as an opaque
type in NIC drivers. This then allows the ifnet structure to be
changed without a need to change or recompile NIC drivers.
Put differently, NIC drivers can be written and compiled once and
be used with different network stack implementations, provided of
course that those network stack implementations have an API and
ABI compatible interface.
This commit introduces the 'if_t' type to replace 'struct ifnet *'
as the type of a network interface. The 'if_t' type is defined as
'void *' to enable the compiler to perform type conversion to
'struct ifnet *' and vice versa where needed and without warnings.
The functions that implement the API are the only functions that
need to have an explicit cast.
The MII code has been converted to use the driver API to avoid
unnecessary code churn. Code churn comes from having to work with
both converted and unconverted drivers in correlation with having
callback functions that take an interface. By converting the MII
code first, the callback functions can be defined so that the
compiler will perform the typecasts automatically.
As soon as all drivers have been converted, the if_t type can be
redefined as needed and the API functions can be fix to not need
an explicit cast.
The immediate benefactors of this change are:
1. Juniper Networks - The network stack implementation in Junos
is entirely different from FreeBSD's one and this change
allows Juniper to build "stock" NIC drivers that can be used
in combination with both the FreeBSD and Junos stacks.
2. FreeBSD - This change opens the door towards changing ifnet
and implementing new features and optimizations in the network
stack without it requiring a change in the many NIC drivers
FreeBSD has.
Submitted by: Anuranjan Shukla <anshukla@juniper.net>
Reviewed by: glebius@
Obtained from: Juniper Networks, Inc.
Reorganize the previous contexts of the file as it is in Linux. The
eventual goal is to install the header files and share them between
the kernel and bhyve.
MFC after: 1 week
At attach, print the SCL and SDA pin numbers.
Remove a stray blank line.
Remove the GPIOBUS locking from gpioiic_reset(), it is already called with
this lock held. This fixes a crash when you try to scan the iicbus with
i2c(8).
get_scatter_segment() in get_fl_payload() fails. While here,
fix the code to adjust fl_bufs_used when a failure occurs for
any other scatter segment.
MFC after: 3 days
If a vt(4) font does not exactly fit the screen dimensions, the console
window is offset so that it is centered. A rectangle is drawn at the
top, left, right, and bottom of the screen, to erase any leftovers that
are outside of the new usable console area.
If the x offset or y offset is 0 then the left border or top border
respectively is not drawn. The right and bottom borders may be one
pixel larger than necessary due to rounding, and are always drawn.
Prior to this change a 0 offset would result in a panic when calling
vt_drawrect with an x or y coordinate of -1.
Sponsored by: The FreeBSD Foundation
vt_grow may be called with a new size that's larger than previous but
does not require reallocation - for example, when the number of columns
is the same and new number of rows is less than the history size.
Prior to this change we would fail to update vb_scr_size, and then hit
a KASSERT when trying to write to the newly visible rows.
Sponsored by: The FreeBSD Foundation
