Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
This includes some whitespace and minor bug fixes relative to NetBSD,
which will be submitted upstream at the conclusion of the makefs
msdos update.
NetBSD revs:
mkfs_msdos.c 1.11
mkfs_msdos.h 1.4
newfs_msdos.8 1.22
newfs_msdos.c 1.44
Submitted by: Siva Mahadevan <smahadevan@freebsdfoundation.org>
Reviewed by: emaste
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
The MAC address reported by `ifconfig ${nic} ether' does not always match
the address in the hardware, as reported by the driver during attach. In
particular, NICs which are components of a lagg(4) interface all report the
same MAC.
When attaching, the NIC driver passes the MAC address it read from the
hardware as an argument to ether_ifattach(). Keep a second copy of it, and
create ioctl(SIOCGHWADDR) to return it. Teach `ifconfig' to report it along
with the active MAC address.
PR: 194386
Reviewed by: glebius
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D10609
The NFSv4 protocol doesn't use the Mount protocol, so it doesn't make sense
to add an entry for an NFSv4 mount to /var/db/mounttab. Also, r308871
modified umount so that it doesn't remove any entry created by mount_nfs.
Reported on freebsd-current@.
Reported by: clbuisson@orange.fr
MFC after: 2 weeks
lease file.
Some routers set very large values for rebind time (Netgear) and these
are erroneously reported as negative in the leasefile. This was due to a
wrong printf format specification of %ld for an unsigned long on 32-bit
platforms.
They would overflow a signed 32-bit time_t on 32 bit architectures. This
was taken care of, but a compiler optimisation makes this behave
erratically. This could be resolved by adding a -fwrapv flag, but
instead we can check the value before adding the current timestamp to
it.
In the lease file values are still wrong though:
option dhcp-rebinding-time -644245096;
PR: 218980
Reported by: Bob Eager
MFC after: 2 weeks
specific parameter.
Tape drives include write protect (WP), Buffered Mode and Speed
settings in the device-specific parameter. Clearing this
parameter on a mode select can have the effect of turning off
write protect or buffered mode, or changing the speed setting of
the tape drive.
Disks report DPO/FUA support via the device specific parameter
for MODE SENSE, but the bit is reserved for MODE SELECT. So we
clear this for disks (and other non-tape devices) to avoid
potential errors from the target device.
sbin/camcontrol/modeedit.c:
Clear the device-specific parameter in the mode page
header if we're not operating on a tape drive.
MFC after: 3 days
Sponsored by: Spectra Logic
name and unit number in camcontrol(8).
Previously camcontrol(8) only supported rescanning or resetting
devices specified by bus:target:lun. This is because for
rescanning at least, you don't have a peripheral name and unit
number (e.g. da4) for devices that don't exist yet.
That is still the case after this change, but in other cases, when
the device does exist in the CAM EDT (Existing Device Table), we
do a careful lookup of the bus/target/lun if the user supplies a
peripheral name and unit number to find the bus:target:lun and then
issue the requested reset or rescan.
The lookup is done without actually opening the device in question,
since a rescan is often done to make a device go away after it has
been pulled. (This is especially true for busses/controllers, like
parallel SCSI controllers, that don't automatically detect changes
in topology.) Opening a device that is no longer there to
determine the bus/target/lun might result in error recovery actions
when the user really just wanted to make the device go away.
sbin/camcontrol/camcontrol.c:
In dorescan_or_reset(), if the use hasn't specified a
numeric argument, assume he has specified a device. Lookup
the pass(4) instance for that device using the transport
layer CAMGETPASSTHRU ioctl. If that is successful, we can
use the returned bus:target:lun to rescan or reset the
device.
Under the hood, resetting a device using XPT_RESET_DEV is
actually sent via the pass(4) device anyway. But this
provides a way for the user to specify devices in a more
convenient way, and can work on device rescans when the
device is going away, assuming it still exists in the EDT.
sbin/camcontrol/camcontrol.8:
Update the man page for the rescan and reset subcommands
to reflect that you can now use a device name and unit
number with them.
Sponsored by: Spectra Logic
MFC after: 3 days
ifconfig doesn't correctly infer mlx interfaces' module names, so it will
attempt to load the mlx(4) module even when not necessary.
Reported by: rstone
MFC after: 3 weeks
X-MFC-With: 317755
Sponsored by: Spectra Logic Corp
* Exit early if kldload(2) fails (1011259). This is the only change that
affects ifconfig's behavior.
* Close memory and resource leaks (1305624, 1305205, 1007100)
* Mark usage() as _Noreturn (1305806, 1305750)
* Fix some dereference after null checks (1011474, 270774)
Reported by: Coverity
CID: 1305624, 1305205, 1007100, 1305806, 1305750, 1011474,
CID: 270774, 1011259
Reviewed by: cem
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D10587
camcontrol timestamp -s would somtimes fail due to stack garbage. Zero out
the timestamp parameters to fix it.
Fix another nearby bug, and update the man page.
sbin/camcontrol/timestamp.c:
In set_timestamp(), bzero ts_p prior to creating the timestamp.
Previously stack garbage could cause some tape drives to reject the
timestamp.
In set_timestamp(), check for failures from strptime().
sbin/camcontrol/camcontrol.8:
Add the time argument to the -T option to camcontrol timestamp -s
in the long description.
Change the time/date format used in the camcontrol timestamp
example to RFC 2822 format. This fixes a time zone issue with the
original example by specifying the time zone as -0600. Otherwise,
the time zone seems to default to standard time in the current
locale, which makes the time, when reported back from the drive,
1 hour off from the intended setting. This also fixes a duplicate
day of the week ("Wednesday Wed") in the previous example.
Submitted by: Sam Klopsch
MFC after: 3 days
Sponsored by: Spectra Logic
patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
Instead of casting listmax and numdirs to unsigned values just define
them as unsigned and avoid the casts. Use reallocarray(3).
While here, fs_ncg is already unsigned so the cast is unnecessary.
Reviewed by: mckusick
MFC after: 2 weeks
Before this change it was impossible to set number of PKCS#5v2 iterations,
required to set passphrase, if it has two keys and never had any passphrase.
Due to present metadata format limitations there are still cases when number
of iterations can not be changed, but now it works in cases when it can.
PR: 218512
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D10338
messages before accessing message fields that may not be present,
removing dead/duplicate/misleading code along the way.
Document the message format for each routing socket message in
route.h.
Fix a bug in usr.bin/netstat introduced in r287351 that resulted in
pointer computation with essentially random 16-bit offsets and
dereferencing of the results.
Reviewed by: ae
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10330
I was swayed a little too quickly when I saw the wiki page discussing
kB vs KiB. Switch back as none of the code in base openly uses
IEC units via humanize_number(3) (which was my next step), and there's
a large degree of dislike with IEC vs more SI-like units.
MFC after: 7 weeks
Submitted by: jhb, rgrimes
Sponsored by: Dell EMC Isilon
- Use strtoll(3) instead of atoi(3), because atoi(3) limits the
representable data to INT_MAX. Check the values received from
strtoll(3), trimming trailing whitespace off the end to maintain
POLA.
- Use `KiB` instead of `kB` when describing free space, total space,
etc. I am now fully aware of `KiB` being the IEC standard for 1024
bytes and `kB` being the IEC standard for 1000 bytes.
- Store available number of KiB in `available` so it can be more
easily queried and compared to ensure that there are enough KiB to
store the dump image on disk.
- Print out the reserved space on disk, per `minfree`, so end-users
can troubleshoot why check_space(..) is reporting that there isn't
enough free space.
MFC after: 7 weeks
Reviewed by: Anton Rang <rang@acm.com> (earlier diff), cem (earlier diff)
Tested with: positive/negative cases (see review); make tinderbox
Sponsored by: Dell EMC Isilon
Differential Revision: D10379
The loop that scans the used inode map when soft updates is in use
assumes that the inosused variable is signed. However, ino_t is
unsigned, so the loop invariant is incorrect and the check for
inosused wrapping to < 0 can never be true.
Instead of checking for wrap after the fact just prevent it from
happening in the first place.
PR: 218592
Submitted by: Todd Miller <todd.miller@courtesan.com>
Reviewed by: mckusick
MFC after: 1 week
The environment variable TMPDIR was copied unchecked into a fixed-size heap
buffer. Use a length-limiting snprintf in place of ordinary sprintf to
prevent the overflow. Long TMPDIR variables can still cause odd truncated
filenames, which may be undesirable.
Reported by: Coverity (CWE-120)
CIDs: 1006706, 1006707
Sponsored by: Dell EMC Isilon
When the replay window size is large than UINT8_MAX, add to the request
the SADB_X_EXT_SA_REPLAY extension header that was added in r309144.
Also add support of SADB_X_EXT_NAT_T_TYPE, SADB_X_EXT_NAT_T_SPORT,
SADB_X_EXT_NAT_T_DPORT, SADB_X_EXT_NAT_T_OAI, SADB_X_EXT_NAT_T_OAR,
SADB_X_EXT_SA_REPLAY, SADB_X_EXT_NEW_ADDRESS_SRC, SADB_X_EXT_NEW_ADDRESS_DST
extension headers to the key_debug that is used by `setkey -x`.
Modify kdebug_sockaddr() to use inet_ntop() for IP addresses formatting.
And modify kdebug_sadb_x_policy() to show policy scope and priority.
Reviewed by: gnn, Emeric Poupon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10375
- State that the units are kB.
- Be more complete/concise in terms of what is required (in this case
`minfree` must be at least `X`kB)
MFC after: 7 weeks
Sponsored by: Dell EMC Isilon
The problem is that the statfs(2) system call used to determine the relevant
mount point returns path within real root in the f_mntonname, causing
nmount(2) system call to fail with ENOENT.
Use a bit of heuristics to skip over few starting path elements when it
happens until we hit an actual mount point.
For this to work properly the whole mount should be accessible within the
chroot, it's going to still fail if chroot only has access to a part of the
mounted fs.
Reviewed by: mckusick
Approved by: mckusick
MFC after: 2 weeks
The code was calling nmount with an fstype of everything in the program
name after the last '_'. This was there to support mount_nfs being
linked to mount_oldnfs. Support for the link was removed in 2015 with
r281691.
Reviewed by: rmacklem
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10301
An unhandled error case would result in passing SIZE_MAX to malloc.
While I'm here, remove an unnecessary NULL check before free
Reported by: Coverity
CID: 1017793
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
was the first release of an OS to ship with it.
Heads up by Ingo Schwarze.
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D10209
The module is designed for modification of a packets of any protocols.
For now it implements only TCP MSS modification. It adds the external
action handler for "tcp-setmss" action.
A rule with tcp-setmss action does additional check for protocol and
TCP flags. If SYN flag is present, it parses TCP options and modifies
MSS option if its value is greater than configured value in the rule.
Then it adjustes TCP checksum if needed. After handling the search
continues with the next rule.
Obtained from: Yandex LLC
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Yandex LLC
No objection from: #network
Differential Revision: https://reviews.freebsd.org/D10150
This opcode can be used to attach some data to external action opcode.
And unlike to O_EXTERNAL_INSTANCE opcode, this opcode does not require
creating of named instance to pass configuration arguments to external
action handler. The data is coming just next to O_EXTERNAL_ACTION opcode.
The userlevel part currenly supports formatting for opcode with ipfw_insn
size, by default it expects u16 numeric value in the arg1.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Also make sure that the renewal is never more than 1/2 * expiry and
rebind never more than 7/4 * renewal (the default values in the spec).
This should allow adjusting high values from the server as well as
making sure the values from the server make sense.
Renewal and rebind times will be adjusted down if the expiry time is set
very high in a server, not the other way around. This change just makes
sure the values keep making sense.
Describe (briefly) how to compile the filesystem into the kernel and
load as a module.
Reference cd9660(5) in mount(8) and mount_cd9660(8).
MFC after: 1 month
Sponsored by: Dell EMC Isilon
it is preceded by \.
foo="I \"like\" C++"
gives the value 'I "like" C++' to the variable 'foo'. If a character
other than " follows the \, both the \ and that character are passed
through.
Differential Revision: https://reviews.freebsd.org/D6286
Sponsored by: Netflix
Since the state name is an optional argument, it often can conflict
with other options. To avoid ambiguity now the state name must be
prefixed with a colon.
Obtained from: Yandex LLC
MFC after: 2 week
Sponsored by: Yandex LLC
With the following in /etc/fstab:
/dev/gpt/swap.eli none swap sw,late 0 0
swap will not be enabled, with `swapon -aL' complaining:
swapon: Invalid option: late
This happens because swap_on_geli_args() which parses geli arguments
out of all mount options does not expect late or noauto among them.
Fix this by explicitly allowing these arguments.
Reviewed by: jilles
Approved by: jilles
MFC after: 2 weeks
Differential Revision: D9835
that they still work. These utilities have become out of sync with the
code in the kernel and need work to bring them back into shape.
Most people test on real systems or VMs on real networks.
Suggested by: glebius
that they still work. These utilities have become out of sync with the
code in the kernel and need work to bring them back into shape.
Most people test on real systems or VMs on real networks.
Sugested by: glebius
This ensures the storage isn't leaked when non-NULL and the function
returns early, prior to the `free(vendor)` later on in the function.
MFC after: 1 week
Reported by: Coverity
CID: 1007111-1007113
Reviewed by: cem
Sponsored by: Dell EMC Isilon
Differential Revision: D9993
The memory stored by `lease` would have previously been leaked if an
unterminated lease declaration was found in an early-return code path.
MFC after: 1 week
Reported by: clang static analyzer, Coverity
CID: 1007114
Submitted by: Tom Rix <trix@juniper.net>
Sponsored by: Dell EMC Isilon; Juniper, Inc
Differential Revision: D9992
The netipsec headers are referenced via netipsec/..., not ./... .
Thus, assuming that the netipsec/... is nested under ${SRCTOP}/sys/netipsec
is wrong.
This tripped up some individuals building ^/head on systems pre-r314812.
MFC after: 1 week
Reported by: Roberto Rodriguez Jr <rob.rodz.jr9@gmail.com>
Sponsored by: Dell EMC Isilon
gpart(8) has functionality to change the label of an GPT partition.
This functionality works like it should, however, after a label change
the /dev/gpt/ entries remain unchanged. glabel(8) status output remains
unchanged. The change only takes effect after a reboot.
PR: 162690
Submitted by: sub.mesa@gmail, Ben RUBSON <ben.rubson@gmail.com>, ae
Reviewed by: allanjude, bapt, bcr
MFC after: 6 weeks.
Differential Revision: https://reviews.freebsd.org/D9935
- Note existence of -m option.
- Note that -s applies to rule keyword, only, by adding usage text
specifically for the `rule` and `ruleset` keywords.
Don't go into any further detail in usage(..) -- it's best that one
reads the manpage to get a better idea of how things work as there are
a number of different option-specific keywords and arguments, as well
as some rule grammar.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Currently are defined three scopes: global, ifnet, and pcb.
Generic security policies that IKE daemon can add via PF_KEY interface
or an administrator creates with setkey(8) utility have GLOBAL scope.
Such policies can be applied by the kernel to outgoing packets and checked
agains inbound packets after IPsec processing.
Security policies created by if_ipsec(4) interfaces have IFNET scope.
Such policies are applied to packets that are passed through if_ipsec(4)
interface.
And security policies created by application using setsockopt()
IP_IPSEC_POLICY option have PCB scope. Such policies are applied to
packets related to specific socket. Currently there is no way to list
PCB policies via setkey(8) utility.
Modify setkey(8) and libipsec(3) to be able distinguish the scope of
security policies in the `setkey -DP` listing. Add two optional flags:
'-t' to list only policies related to virtual *tunneling* interfaces,
i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL
scope. By default policies from all scopes are listed.
To implement this PF_KEY's sadb_x_policy structure was modified.
sadb_x_policy_reserved field is used to pass the policy scope from the
kernel to userland. SADB_SPDDUMP message extended to support filtering
by scope: sadb_msg_satype field is used to specify bit mask of requested
scopes.
For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy
is used to pass if_ipsec's interface if_index to the userland. For GLOBAL
policies sadb_x_policy_priority is used only to manage order of security
policies in the SPDB. For IFNET policies it is not used, so it can be used
to keep if_index.
After this change the output of `setkey -DP` now looks like:
# setkey -DPt
0.0.0.0/0[any] 0.0.0.0/0[any] any
in ipsec
esp/tunnel/87.250.242.144-87.250.242.145/unique:145
spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0
refcnt=1
# setkey -DPg
::/0 ::/0 icmp6 135,0
out none
spid=5 seq=1 pid=872 scope=global
refcnt=1
No objection from: #network
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9805
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Some APs broadcast WPS IE frames with totally broken data. Ifconfig's printwpsie()
loops through WPS frames printing the attributes out; if the frame's data is bad,
printwpsie() can end up looking at out-of-bounds addresses causing ifconfig to
bus error.
Thanks to Takashi Inoue at Nihon U for his efforts in debugging this.
PR: bin/217312
Submitted by: fbsd@opal.com
MFC after: 1 week
* Migrate the rx_params stuff out from ieee80211_freebsd.h where it doesn't belong -
this isn't freebsd specific anymore.
* Don't use a hard-coded number of chains in the ioctl header; now we can shuffle
MAX_CHAINS around so it can be used in the right spot.
* Extend the signal/noisefloor levels in the mimo stats struct to userland to include
the signal and noisefloor levels for each 20MHz slice of a 160MHz channel.
* Bump the number of EVM pilots in preparation for 4x4 and 160MHz channels.
Tested:
* ath(4), STA mode
* iwn(4), STA mode
* local ath10k port, STA mode
TODO:
* 11ax chips will come with 5GHz 8x8 hardware for lots of MU-MIMO - I'll re-bump it
at that point.
Note:
* This breaks the driver and ifconfig ABI; please recompile the kernel,
ifconfig and wpa_supplicant/hostapd.
Users can use the new generic argument, -Q task_attr, to specify a task
attribute (simple, ordered, head of queue, aca) for the commands issued.
The the default is simple, which works with all SCSI devices that support
tagged queueing.
This will mostly be useful for debugging target behavior in certain
situations.
You can try it out by compiling CTL with CTL_IO_DELAY turned on (in
sys/cam/ctl/ctl_io.h) and then do something like this with one of the CTL
LUNs:
ctladm delay 0:0 -l done -t 10
camcontrol tur da34 -v
And at then before the 10 second timer is up, in another terminal:
camcontrol inquiry da34 -Q ordered -v
The Inquiry should complete just after the TUR completes. Ordinarily
it would complete first because of the delay injection, but because the
task attribute is set to ordered in this case, CTL holds it up until the
previous command has completed.
sbin/camcontrol/camcontrol.c:
Add the new generic argument, -Q, which allows the user to specify
a SCSI task attribute. The user can specify task attributes by
name or numerically.
Add a new task_attr arguments to SCSI sub-functions.
sbin/camcontrol/attrib.c,
sbin/camcontrol/camcontrol.h,
sbin/camcontrol/fwdownload.c,
sbin/camcontrol/modeedit.c,
sbin/camcontrol/persist.c,
sbin/camcontrol/timestamp.c,
sbin/camcontrol/zone.c:
Add the new task_attr argument to SCSI sub-functions.
sbin/camcontrol/camcontrol.8:
Document the new -Q option, and add an example.
Sponsored by: Spectra Logic
MFC after: 1 week
meta-data, copy it into the softc structure.
When returning md(4) device details to the caller, include the file name in
any MD_PRELOAD type devices if it is set (first character is not NUL.)
In mdconfig, for "preload" type md(4) devices, if there is file config
available, print it in the file column of the output.
Reviewed by: brooks
Approved by: sjg (mentor)
MFC after: 1 month
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D9529
Small summary
-------------
o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.
Reviewed by: gnn, wblock
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352
- Perform final decryption and write decrypted data in case of non-block aligned
input data;
- Use strlcpy(3) instead of strncpy(3) to verify if paths aren't too long;
- Check errno after calling unlink(2) instead of calling stat(2) in order to
verify if a decrypted core was created by a child process;
- Free dumpkey.
Reported by: Coverity, cem, pfg
Suggested by: cem
CID: 1366936, 1366942, 1366951, 1366952
Approved by: pjd (mentor)
wdc cap-diag Capture diagnostic data from drive
wdc drive-log Capture drive history data from drive
wdc get-crash-dump Retrieve firmware crash dump from drive
r312992 removed RESTARTCMD_WITH_ARG for @RESTARTCMD something@ but
reverted the sed to be '@RESTARTCMD \(.*\)@' and RESTARTCMD= to be
the value of RESTARTCMD_WITH_ARG.
Submitted by: Guy Yur
x_MFC with: r312992
MAXPHYS bytes of data, the I/O would require MAXPHYS + PAGE_SIZE worth
of pages to do the I/O and we'd hit an assertion in
vm_fault_quick_hold_pages unless MAXPHYS was larger than 1M +
PAGE_SIZE.
openresolv: update to version 3.9.0.
It is now possible to drop the _WITH_ARG vars thanks to a change to the
pdns_recursor upstreamed by Guy Yur.
MFC after: 3 weeks
overwrites an existing file rather than removing it and creating a
new file. If the old and new version of the file both have extended
attributes and the extended attributes of the two versions of the
file are different, the result is that the new file ends up with
the union of the extended attributes of the old and new files.
To get the behavior of replacing the extended attributes rather
than augmenting them requires explicitly removing the old attributes
and then adding the new ones.
To get this behavior, the old file must be unlinked (which clears
out the old extended attributes). Then the new file of the same
name must be created and the new extended attributes added to it.
This behavior can be obtained by specifying the -u flag when running
restore. Rather than defaulting the -u option to on and possibly
breaking existing scripts using restore, this change simply notes
in the restore.8 manual page that the -u flag is recommended when
using restore on filesystems that contain extended attributes.
PR: 216127
Reported by: dewayne at heuristicsystems.com.au
Differential Revision: https://reviews.freebsd.org/D9208
CID 1229913 Fix output of "camcontrol persist -i report_capabilities".
The reported Persistent Reservation Types were wrong in all
cases.
CID 1356029 Annotate the code so Coverity will know that this is a false
positive.
CID 1366830 Fix a memory leak in "camcontrol timestamp -s"
CID 1366832 Fix a segfault that could be caused by bad drive firmware
Also, fix the man page entry for the "camcontrol epc state" command to match
what the code does.
Reviewed by: ken, wblock
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9239
- Add RATELIMIT kernel configuration keyword which must be set to
enable the new functionality.
- Add support for hardware driven, Receive Side Scaling, RSS aware, rate
limited sendqueues and expose the functionality through the already
established SO_MAX_PACING_RATE setsockopt(). The API support rates in
the range from 1 to 4Gbytes/s which are suitable for regular TCP and
UDP streams. The setsockopt(2) manual page has been updated.
- Add rate limit function callback API to "struct ifnet" which supports
the following operations: if_snd_tag_alloc(), if_snd_tag_modify(),
if_snd_tag_query() and if_snd_tag_free().
- Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT
flag, which tells if a network driver supports rate limiting or not.
- This patch also adds support for rate limiting through VLAN and LAGG
intermediate network devices.
- How rate limiting works:
1) The userspace application calls setsockopt() after accepting or
making a new connection to set the rate which is then stored in the
socket structure in the kernel. Later on when packets are transmitted
a check is made in the transmit path for rate changes. A rate change
implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the
destination network interface, which then sets up a custom sendqueue
with the given rate limitation parameter. A "struct m_snd_tag" pointer is
returned which serves as a "snd_tag" hint in the m_pkthdr for the
subsequently transmitted mbufs.
2) When the network driver sees the "m->m_pkthdr.snd_tag" different
from NULL, it will move the packets into a designated rate limited sendqueue
given by the snd_tag pointer. It is up to the individual drivers how the rate
limited traffic will be rate limited.
3) Route changes are detected by the NIC drivers in the ifp->if_transmit()
routine when the ifnet pointer in the incoming snd_tag mismatches the
one of the network interface. The network adapter frees the mbuf and
returns EAGAIN which causes the ip_output() to release and clear the send
tag. Upon next ip_output() a new "snd_tag" will be tried allocated.
4) When the PCB is detached the custom sendqueue will be released by a
non-blocking ifp->if_snd_tag_free() call to the currently bound network
interface.
Reviewed by: wblock (manpages), adrian, gallatin, scottl (network)
Differential Revision: https://reviews.freebsd.org/D3687
Sponsored by: Mellanox Technologies
MFC after: 3 months
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
Previously code ignored resid field and returned extra zeroes in case of
data underflow. Now it returns only real bytes received from target.
MFC after: 2 weeks
If our buffer is too small, we may receive part of the page, and should
not try read/write past the end of the buffer.
Reported by: Coverity
CID: 1368374, 1368375
MFC after: 1 week
This is very preliminary and mostly enough for me (with other patches)
to work on VHT support.
It adds:
* VHT20, VHT40 and VHT80 regulatory/band awareness
* VHT20, VHT40 and VHT80 channel configuration / population
* Parses vht channel specifications (eg ifconfig wlan0 create wlandev athp0 wlanmode monitor channel 36:vht/80)
* Configuration of VHT, VHT40, VHT80, VHT80+80, VHT160 channel
width (IEEE80211_FVHT_VHT* flags in net80211)
TODO:
* No VHT80+80 or VHT160 channels yet - I don't yet have hardware, and I'm
not yet sure how to support/populate VHT80+80 channels.
* No, I won't update the manpage until this is "more done", lest someone
tries using vht and gets upset with me.
* No, I won't commit the regulatory database I'm testing with, so you'll
just end up with no VHT channels ever populated. Which is good, as there
isn't an 11ac driver in-tree yet to try it with.
struct ip in ping(8):
sbin/ping/ping.c:1684:53: error: taking address of packed member
'ip_src' of class or structure 'ip' may result in an unaligned pointer
value [-Werror,-Waddress-of-packed-member]
(void)printf(" %s ", inet_ntoa(*(struct in_addr *)&ip->ip_src.s_addr));
^~~~~~~~~~~~~~~~~
sbin/ping/ping.c:1685:53: error: taking address of packed member
'ip_dst' of class or structure 'ip' may result in an unaligned pointer
value [-Werror,-Waddress-of-packed-member]
(void)printf(" %s ", inet_ntoa(*(struct in_addr *)&ip->ip_dst.s_addr));
^~~~~~~~~~~~~~~~~
MFC after: 3 days
The offending code has been dead ever since the import from OpenBSD in
r195805. OpenBSD later deleted that entire function.
Reported by: Coverity
CID: 500059
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
is a 32-bit socklen_t, do_get3() passes the kernel to access the wrong
32-bit half on big-endian LP64 machines when simply casting the 64-bit
size_t optlen to a socklen_t pointer.
While at it and given that the intention of do_get3() apparently is to
hide/wrap the fact that socket options are used for communication with
ipfw(4), change the optlen parameter of do_set3() to be of type size_t
and as such more appropriate than uintptr_t, too.
MFC after: 3 days
In this specific case the src address can be set to any, which was not
accepted prior to this commit.
pfSense bug report: https://redmine.pfsense.org/issues/6985
Reviewed by: kp
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
The primary purpose is to call nmount() in a loop with new iovec's so
free_iovec takes arguments by reference and resets their values.
Reviewed by: cem
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8513
