We didn't allowed a divider register value of 0 which can exists and
also didn't wrote the value but the divider, which result of a wrong
frequency to be selected
It doesn't work since 2 years when we stopped patching DTS.
The DTS now have the correct bindings but they are a lot different
from our hacked ones we used to have (and more representative of the
reality).
Remove the old clocks for allwinner as now all the SoCs have been converted
to clkng.
The only old clock now is the gmac clock which still lives under the /clocks
dts node.
efi_enter here was needed because efi_runtime dereference causes a fault
outside of EFI context, due to runtime table living in runtime service
space. This may cause problems early in boot, though, so instead access it
by converting paddr to KVA for access.
While here, remove the other direct PHYS_TO_DMAP calls and the explicit DMAP
requirement from efidev.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16591
Swapped-out process that is WKILLED must be swapped in as soon as
possible. The reason is that such process can be killed by OOM and
its pages can be only freed if the process exits. To exit, the kernel
stack of the process must be mapped.
When allocating pages for the stack of the WKILLED process on swap in,
use VM_ALLOC_SYSTEM requests to increase the chance of the allocation
to succeed.
Add counter of the swapped out processes to avoid unneeded iteration
over the allprocs list when there is no work to do, reducing the
allproc_lock ownership.
Reviewed by: alc, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16489
sosend_generic() performs an initial comparison of the amount of data
(including control messages) to be transmitted with the send buffer
size. When transmitting on a unix socket, we then compare the amount
of data being sent with the amount of space in the receive buffer size;
if insufficient space is available, sbappendcontrol() returns an error
and the data is lost. This is easily triggered by sending control
messages together with an amount of data roughly equal to the send
buffer size, since the control message size may change in uipc_send()
as file descriptors are internalized.
Fix the problem by removing the space check in sbappendcontrol(),
whose only consumer is the unix sockets code. The stream sockets code
uses the SB_STOP mechanism to ensure that senders will block if the
receive buffer fills up.
PR: 181741
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16515
Summary:
Base gcc fails to compile `sys/dev/hyperv/pcib/vmbus_pcib.c` for i386,
with the following -Werror warnings:
cc1: warnings being treated as errors
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'new_pcichild_device':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:567: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'vmbus_pcib_on_channel_callback':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:940: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'hv_pci_protocol_negotiation':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:1012: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'hv_pci_enter_d0':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:1073: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'hv_send_resources_allocated':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:1125: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'vmbus_pcib_map_msi':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:1730: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
This is because on i386, several casts from `uint64_t` to a pointer
reduce the value from 64 bit to 32 bit.
For gcc, this can be fixed by an intermediate cast to uintptr_t. Note
that I am assuming the incoming values will always fit into 32 bit!
Differential Revision: https://reviews.freebsd.org/D15753
MFC after: 3 days
Usbhid's hid_report_size() calculates integral size of all reports of given
kind found in the HID descriptor rather then exact size of report with given
ID as its userland counterpart does. As all input data processed by the
driver is located within the same report, calculate required driver's buffer
size with userland version, imported in one of the previous commits.
This allows us to skip zeroing of buffer on processing of each report.
While here do some minor refactoring.
MFC after: 2 weeks
if present to enable some devices like WaveShare touchscreens. Unlike
Windows we discard content of the blob. We try mimic Windows driver
behaviour from the USB device point of view.
Submitted by: glebius (initial version)
rather than from HID descriptor to match Microsoft documentation.
Fall back to HID descriptor provided value if 'Get Report' request failed.
MFC after: 2 weeks
The links were to cope with the switch to upstream dts.
We don't need them anymore.
While here add the rest of the beaglebone family dts as u-boot is common
on all those boards and load the dtb based on the product name.
This just miss the pocketbeagle variant as it's not yet in sys/gnu/dts but
will be with the Linux 4.18 dts import.
Summary:
Some architectures, in this case powerpc64, need explicit synchronization
barriers vs device accesses.
Prior to this change, when running 'make buildworld -j72' on a 18-core
(72-thread) POWER9, I would see controller resets often. With this change, I
don't see these resets messages, though another tester still does, for yet to be
determined reasons, so this may not be a complete fix. Additionally, I see a
~5-10% speed up in buildworld times, likely due to not needing to reset the
controller.
Reviewed By: jimharris
Differential Revision: https://reviews.freebsd.org/D16570
- Properly handle snprintf return value for truncation and avoid
overflowing the later write with the bogus length.
- Increase the msgbufr size to handle a rename of 2 full files.
The larger allocation causes a slight performance hit which will be mitigated
in the future. A rewrite with sbufs will likely be done as well.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
MFC after: 2 weeks
Approved by: so (gtetlow)
Reviewed by: kib
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D16098
This actually makes the rights requirements for accessing PCI config
space and BARs using /dev/pci same. Since unchanged /dev/pci mode
only allows write open for root, default configuration de-facto limits
the BAR read to root only. In particular, state-changing reads of the
registers are limited to root.
Discussed with: se
Suggested and reviewed by: jhb (kernel part)
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Differential revision: https://reviews.freebsd.org/D16580
The code that iterates a list of interrupt handlers for a (shared)
interrupt, whether in the ISR context or in the context of an interrupt
thread, does so in a lock-free fashion. Thus, the routines that modify
the list need to take special steps to ensure that the iterating code
has a consistent view of the list. Previously, those routines tried to
play nice only with the code running in the ithread context. The
iteration in the ISR context was left to a chance.
After commit r336635 atomic operations and memory fences are used to
ensure that ie_handlers list is always safe to navigate with respect to
inserting and removal of list elements.
There is still a question of when it is safe to actually free a removed
element.
The idea of this change is somewhat similar to the idea of the epoch
based reclamation. There are some simplifications comparing to the
general epoch based reclamation. All writers are serialized using a
mutex, so we do not need to worry about concurrent modifications. Also,
all read accesses from the open context are serialized too.
So, we can get away just two epochs / phases. When a thread removes an
element it switches the global phase from the current phase to the other
and then drains the previous phase. Only after the draining the removed
element gets actually freed. The code that iterates the list in the ISR
context takes a snapshot of the global phase and then increments the use
count of that phase before iterating the list. The use count (in the
same phase) is decremented after the iteration. This should ensure that
there should be no iteration over the removed element when its gets
freed.
This commit also simplifies the coordination with the interrupt thread
context. Now we always schedule the interrupt thread when removing one
of handlers for its interrupt. This makes the code both simpler and
safer as the interrupt thread masks the interrupt thus ensuring that
there is no interaction with the ISR context.
P.S. This change matters only for shared interrupts and I realize that
those are becoming a thing of the past (and quickly). I also understand
that the problem that I am trying to solve is extremely rare.
PR: 229106
Reviewed by: cem
Discussed with: Samy Al Bahra
MFC after: 5 weeks
Differential Revision: https://reviews.freebsd.org/D15905
Previously, this check was omitted for the first frame pointer.
Reported by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16572
When doing a read from disk, ZFS creates 3 ZIO's: a zio_null(), the
logical zio_read(), and then a physical zio. Currently, each of these
results in a separate taskq_dispatch(zio_execute).
On high-read-iops workloads, this causes a significant performance
impact. By processing all 3 ZIO's in a single taskq entry, we reduce the
overhead on taskq locking and context switching. We accomplish this by
allowing zio_done() to return a "next zio to execute" to zio_execute().
This results in a ~12% performance increase for random reads, from
96,000 iops to 108,000 iops (with recordsize=8k, on SSD's).
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-59292
Closes#7736zfsonlinux/zfs@62840030a7
9580 Add a hash-table on top of nvlist to speed-up operations
illumos/illumos-gate@2ec7644aab
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
Enable the LOCAL_PEERCRED socket option for unix domain stream sockets
created with socketpair(2). Previously, it only worked with unix domain
stream sockets created with socket(2)/listen(2)/connect(2)/accept(2).
PR: 176419
Reported by: Nicholas Wilson <nicholas@nicholaswilson.me.uk>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16350
illumos/illumos-gate@843c2111b1
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@48dd5e630c
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@9ca527c3d3
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9465 ARC check for 'anon_size > arc_c/2' can stall the system
illumos/illumos-gate@abe1fd01ce
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Don Brady <don.brady@delphix.com>
The zfs_dbuf_evict_key TSD (thread-specific data) is not necessary - we can
instead pass a flag down in a few places to prevent recursive dbuf eviction.
Making this change has 3 benefits:
1. The code semantics are easier to understand.
2. On Linux, performance is improved, because creating/removing TSD values
(by setting to NULL vs non-NULL) is expensive, and we do it very often.
3. According to Nexenta, the current semantics can cause a deadlock when
concurrently calling dmu_objset_evict_dbufs() (which is rare today, but they
are working on a "parallel unmount" change that triggers this more easily)
illumos/illumos-gate@c2919acbea
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
indirect vdevs that have been historically expanded
illumos/illumos-gate@11f6a9680e
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
illumos/illumos-gate@99a19144e8
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9438 Holes can lose birth time info if a block has a mix of birth times
Ultimately, the problem here is that when you truncate and write a file in
the same transaction group, the dbuf for the indirect block will be zeroed
out to deal with the truncation, and then written for the write. During
this process, we will lose hole birth time information for any holes in the
range. In the case where a dnode is being freed, we need to determine
whether the block should be converted to a higher-level hole in the zio
pipeline, and if so do it when the dnode is being synced out.
illumos/illumos-gate@738e2a3ce3
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@dec267e7ea
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9424 ztest failure: "unprotected error in call to Lua API (Invalid value type 'f
unction' for key 'error')"
illumos/illumos-gate@fe3ba4d122
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
- Ignore any type of TID where the start/end values are not in the
correct order. There are situations where the firmware isn't able to
reserve room for the number requested in the config file but doesn't
report a failure during configuration and instead sets end <= start.
- Track start/end in tid_tab and remove some redundant copies from
adapter->params.
- Move all the start/end and other read-only parameters to a quiet part
of tid_tab, away from the tid locks.
MFC after: 1 week
Sponsored by: Chelsio Communications
In the most fragmented real-world cases, this reduces memory used by the
mapping from ~1GB to ~50MB of RAM per 1TB of storage removed. Less
fragmented cases will typically also see around 50-100MB of RAM per 1TB
of storage.
illumos/illumos-gate@cfd63e1b1b
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
Datasets that are deeply nested (~100 levels) are impractical. We just put
a limit of 50 levels to newly created datasets. Existing datasets should
work without a problem.
illumos/illumos-gate@5ac95da7d6
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Continues what was started in 7801 add more by-dnode routines by fully
converting zvols to avoid unnecessary dnode_hold() calls. This saves a
small amount of CPU time and slightly improves latencies of operations
on zvols.
illumos/illumos-gate@8dfe5547fb
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Rick McNeal <rick.mcneal@nexenta.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Richard Yao <richard.yao@prophetstor.com>
All objects after the last written or freed object are not supposed to
exist after receiving the stream. We should free them accordingly, as if
a freeobjects record for them had been included in the stream.
zfsonlinux/zfs@48fbb9ddbfillumos/illumos-gate@7864b8192b
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
9464 txg_kick() fails to see that we are quiescing, forcing transactions
to their next stages without leaving them accumulate changes
Ideally we would like txg_kick() to get triggered only when we are sure
that we are not syncing AND not quiescing any txg. This way we can kick
an open TXG to the quiescing state when we are sure that there is nothing
going on and we would benefit from the different states running
concurrently.
illumos/illumos-gate@fa41d87de9
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
