RIPEMD160_Update were broken when all of the following conditions
applied:
(1) The platform is i386.
(2) The program calling *_Update is statically linked to libmd.
(3) The buffer provided to *_Update is aligned modulo 4 bytes.
(4) The buffer extends beyond 2GB.
Due to the design of this code, SHA1_Update and RIPEMD160_Update will
still be broken if conditions (1)-(3) apply AND the buffer extends
beyond 4GB (i.e., there is an integer overflow in computing "data + len").
Since this remaining bug simply replaces SIGSEGV with a bogus hash (and
non-broken programs should never provide such operands) I don't consider
it to be a serious problem.
MFC After: 1 week
PR: kern/102795
Warning, after symbol versioning is enabled, going back is not easy
(use WITHOUT_SYMVER at your own risk).
Change the default thread library to libthr.
There most likely still needs to be a version bump for at least the
thread libraries. If necessary, this will happen later.
passed storage buffers rather than using static storage. Reimplement
ether_ntoa() and ether_aton() in terms of these functions. These variants
are thread-safe.
that ints have >= 31 value bits elsewhere. s/int/int32_t/ seems to
have been done too globally for all other files in msun/src before
msun/ was imported into FreeBSD.
Minor fixes in comments.
e_lgamma_r.c:
Describe special cases in more detail:
- exception for lgamma(0) and lgamma(neg.integer)
- lgamma(-Inf) = Inf. This is wrong but is required by C99 Annex F. I
hope to change this.
(1) tgamma(-Inf) returned +Inf and failed to raise any exception, but
should always have raised an exception, and should behave like
tgamma(negative integer).
(2) tgamma(negative integer) returned +Inf and raised divide-by-zero,
but should return NaN and raise "invalid" on any IEEEish system.
(3) About half of the 2**52 negative intgers between -2**53 and -2**52
were misclassified as non-integers by using floor(x + 0.5) to round
to nearest, so tgamma(x) was wrong (+-0 instead of +Inf and now NaN)
on these args. The floor() expression is hard to use since rounding
of (x + 0.5) may give x or x + 1, depending on |x| and the current
rounding mode. The fixed version uses ceil(x) to classify x before
operating on x and ends up being more efficient since ceil(x) is
needed anyway.
(4) On at least the problematic args in (3), tgamma() raised a spurious
inexact.
(5) tgamma(large positive) raised divide-by-zero but should raise overflow.
(6) tgamma(+Inf) raised divide-by-zero but should not raise any exception.
(7) Raise inexact for tiny |x| in a way that has some chance of not being
optimized away.
The fix for (5) and (6), and probably for (2), also prevents -O optimizing
away the exception.
PR: 112180 (2)
Standards: Annex F in C99 (IEC 60559 binding) requires (1), (2) and (6).
values in more detail, and change the style of this comment to be closer
to fdlibm and C99:
- tgamma(-Inf) was undocumented and is wrong (+Inf, should be NaN)
- tgamma(negative integer) is as intended (+Inf) but not best for IEEE-754
(NaN)
- tgamma(-0) was documented as being wrong (+Inf) but was correct (-Inf)
- documentation of setting of exceptions (overflow, etc.) was more
complete here than in most of libm, but was further from matching
the actual setting than in most of libm, due to various bugs here
(primarily, always evaluating +Inf one/zero and getting unwanted
divide-by-zero exceptions from this). Now the actual behaviour with
gcc -O0 is documented. Optimization still breaks setting of exceptions
all over libm, so nothing can depend on this working.
- tgamma(NaN)'s exception was documented as being wrong (invalid) but was
correct (no exception with IEEEish NaNs).
Finish (?) rev.1.5. gamma was not renamed to tgamma in one place.
Finish (?) rev.1.6. errno.h was not completely removed.
Not because I admit they are technically wrong and not because of bug
reports (I receive nothing). But because I surprisingly meets so
strong opposition and resistance so lost any desire to continue that.
Anyone who interested in POSIX can dig out what changes and how
through cvs diffs.
needed to hold the GEOM tree. At this point, pointer 'p' has an improper
value (as it was used previously), and we're getting EFAULT. Fix this
functionality by passing NULL instead of 'p'.
This fixes mdconfig(8) -l output with high number of md(4) devices.
Found by: kris
Reviewed by: phk
(also IEEE Std 1003.1-2001)
The specs explicitly says that altering passed string
should change the environment, i.e. putenv() directly puts its arg
into environment (unlike setenv() which just copies it there).
It means that putenv() can't be implemented via setenv()
(like we have before) at all. Putenv() value lives (allows modifying)
up to the next putenv() or setenv() call.
compatibility with the different environment conventions" (man page).
With the standards, we don't have them different anymore and
IEEE Std 1003.1-2001 says that
"The values that the environment variables may be assigned are not
restricted except that they are considered to end with a null byte"
Issue 6 (also IEEE Std 1003.1-2001) in following areas:
args, return, errors.
Putenv still needs rewriting because specs explicitly says that
altering passed string later should change the environment (currently we
copy the string so can't provide that).
once (CWD a/b/c vs. 3 CWDs). If an error occurs, we fall back to the default
method of a single CWD per directory element. Since this is technically
a violation of the basic FTP RFC, this behavior is under a compile-time
option FTP_COMBINE_CWDS and is off by default. It should work with most
Unix-based FTP daemons and can save latency.
MFC after: 2 weeks
1. CMSG_NXTHDR(mhdr, cmsg) is supposed to dereference cmsg and return
the next header in the chain. If cmsg is NULL it should return
the first header, behaving essentially like CMSG_FIRSTHDR().
2. inet6_rth_(space|init|add) should do basic checking on their input
to verify that the number of headers (segments) is
between 0 and 127 inclusive.
MFC-After: 1 month
occur on the write side of extracting a file to ARCHIVE_WARN errors
when returning them from archive_read_extract.
In bsdtar: Use the return code from archive_read_data_into_fd and
archive_read_extract to determine whether we should continue trying to
extract an archive after one of the entries fails.
This commit makes extracting a truncated tarball complain once about
the archive being truncated, instead of complaining twice (once when
trying to extract an entry, and once when trying to seek to the next
entry).
Discussed with: kientzle
* use "AR_GNU" as the format name instead of AR_SVR4 (it's what everyone is going to call it anyway)
* Simplify numeric parsing to unsigned (none of the numeric values should ever be negative); don't run off end of numeric fields.
* Finish parsing the common header fields before the next I/O request (which might dump the contents)
* Be smarter about format guessing and trimming filenames.
* Most of the magic values are only used in one place, so just inline them.
* Many more comments.
* Be smarter about handling damaged entries; return something reasonable.
* Call it a "filename table" instead of a "string table"
* Update tests.
Enable selection of 'ar', 'arbsd', and 'argnu' formats by name
(this allows bsdtar to create ar format archives).
The 'ar' writer still needs some work; it should reject
entries that aren't regular files and should probably also
strip leading paths from filenames.
on int, but in fact it should operate on long.
- Introduce 'lvalue' variable, which is long.
- Fix _SC_XOPEN_SHM for 64bit archs.
- Fix _SC_PHYS_PAGES for 64bit archs.
Reported by: simokawa
- Use lvalue for pathconf(3), as it returns long.
- Cast value explicitly to long on return.
for directories. bsdtar used to add this, but that recently got
lost somehow. So now I'm adding it back in libarchive.
The only odd part of doing this in libarchive: Adding a directory to
a tar archive and then reading it back again can yield a different name.
Add a test case to exercise some boundary conditions with
tar filenames and ensure that trailing slashes are added to
dir names only as necessary.
Thanks to: Oliver Lehmann for bringing this regression to my attention.
conditionally use utime() when utimes() is not available;
allow the most common wide-char functions to be replaced
when local alternatives are lacking.
Update the description of the "p6-div" and "p6-mul" events according
to the "Intel(r) 64 and IA-32 Architectures Software Developers
Manual Volume 3B: System Programming Guide, Part 2, November 2006".
Reported by: Harald Servat <redcrash at gmail dot com> [1]
message in the reader to the error message from the writer if the
error which occurred was in the writer. This avoids error messages
of "Empty error message" when extracting truncated archives.
redeclared as static in res_debug.c.
Make __p_rcode_syms global and add it to Symbol map. The rest of
__p_??_syms are already global.
Choice of FBSD_1.0 version for these debug symbols seems strange and
should be revisited before symbol versioning is enabled for libc.so.7.
unmount jail-friendly file systems from within a jail.
Precisely it grants PRIV_VFS_MOUNT, PRIV_VFS_UNMOUNT and
PRIV_VFS_MOUNT_NONUSER privileges for a jailed super-user.
It is turned off by default.
A jail-friendly file system is a file system which driver registers
itself with VFCF_JAIL flag via VFS_SET(9) API.
The lsvfs(1) command can be used to see which file systems are
jail-friendly ones.
There currently no jail-friendly file systems, ZFS will be the first one.
In the future we may consider marking file systems like nullfs as
jail-friendly.
Reviewed by: rwatson
implementation, and mark it as deprecated. It will be removed entirely
in libarchive 3.0 (in FreeBSD 8.0?) but there's no reason for anyone to
use it instead of archive_read_data.
Approved by: kientzle
two values, the latter does not tend to have sign extension
and/or overflow bugs, and makes the code more obvious.
While I'm there, make use of a macro which is derived from
bin/ps/ps.c: ps_compat() to improve the readability of the
code.
Suggested by: bde
MFC after: 1 week
skip over the end-of-entry padding instead of reading and discarding
it.
Considering that tar files normally have a block size of 10kB, this
isn't likely to avoid reading any data, but at least it makes the code
simpler and clearer.
discards it, for use when the compression layer code doesn't know how to
skip data (e.g., everything other than the "none" compressor). This makes
format level code simpler because that code can now assume that the
compression layer always knows how to skip and will always skip exactly
the requested number of bytes.
Discussed with: kientzle (3 months ago)
avoid downcasting issues. In particular, this change fixes
posix_memalign(3) for alignments greater than 2^31 on LP64 systems.
Make sure that NDEBUG is always set to be compatible with MALLOC_DEBUG. [1]
Reported by: [1] Lee Hyo geol <hyogeollee@gmail.com>
trees that track all non-full runs for each bin. Use the red-black
trees to be able to guarantee that each new allocation is placed in the
lowest address available in any non-full run. This change completes the
transition to allocating from low addresses in order to reduce the
retention of sparsely used chunks.
If the run in current use by a bin becomes empty, deallocate the run
rather than retaining it for later use. The previous behavior had the
tendency to spread empty runs across multiple chunks, thus preventing
the release of chunks that were completely unused.
Generalize base_chunk_alloc() (and rename it to base_pages_alloc()) to
handle allocation sizes larger than the chunk size, so that it is
possible to support chunk sizes that are smaller than an arena object.
Reduce the minimum chunk size from 64kB to 8kB.
Optimize tracking of addresses for deleted chunks.
Fix a statistics bug for huge allocations.
with `pw lock', so that it's impossible to log into a locked account
using an alternative authentication mechanism, such as an ssh key.
This change affects only accounts locked with pw(8), i.e., having a
`*LOCKED*' prefix in their password hash field, so people still can
use a different pattern to disable password authentication only.
Mention all account management criteria in the manpage.
Approved by: maintainer (timeout)
PR: bin/71147
MFC after: 1 month
- Correctly retrieve the initial (special) members of an archive after
an archive descriptor is rewound using elf_rand(SARMAG).
- Do not strip trailing white space from the 'raw' names retrieved
using elf_getarhdr().
Reported by: "Hyo geol, Lee" <hyogeollee at gmail dot com>
rounding and overflow. Carefully document what the various overflow
tests actually detect.
The bugs mostly canceled out, such that the worst possible failure
cases resulted in non-fatal over-allocations.
Don't change permissions on an existing dir unless _EXTRACT_PERM
is requested.
In particular, bsdtar -x should not edit mode of existing dirs
now; bsdtar -xp will.
than binary buddies, the alignment guarantees are weaker, which requires
a more complex aligned allocation algorithm, similar to that used for
alignment greater than the chunk size.
Reported by: matteo
chunks. This allows runs to be any multiple of the page size. The
primary advantage is that large objects are no longer constrained to be
2^n pages, which can dramatically decrease internal fragmentation for
large objects. This also allows the sizes for runs that back small
objects to be more finely tuned.
Free runs are searched for linearly using the chunk page map (with the
help of some heuristic optimizations). This changes the allocation
policy from "first best fit" to "first fit". A prototype red-black tree
implementation for tracking free runs that implemented "first best fit"
did not cause a measurable speed or memory usage difference for
realistic chunk sizes (though of course it is possible to construct
benchmarks that favor one allocation policy over another).
Refine the handling of fullness constraints for small runs to be more
tunable.
Restructure the per chunk page map to contain only two fields per entry,
rather than four. Also, increase each entry from 4 to 8 bytes, since it
allows for 32-bit integers, without increasing the number of chunk
header pages.
Relax the maximum chunk size constraint. This is of no practical
interest; it is merely fallout from the chunk page map restructuring.
Revamp statistics gathering and reporting to be faster, clearer and more
informative. Statistics gathering is fast enough now to have little
to no impact on application speed, but it still requires approximately
two extra pages of memory per arena (per process). This memory overhead
may be acceptable for most systems, but we still need to leave
statistics gathering disabled by default in RELENG branches.
Rename NO_MALLOC_EXTRAS to MALLOC_PRODUCTION in order to make its intent
clearer (i.e. it should be defined in RELENG branches).
avoid substantial potential bloat for static binaries that do not
otherwise use any printf(3)-family functions. [1]
Rearrange arena_run_t so that the region bitmask can be minimally sized
according to constraints related to each bin's size class. Previously,
the region bitmask was the same size for all run headers, which wasted
a measurable amount of memory.
Rather than making runs for small objects as large as possible, make
runs as small as possible such that header overhead stays below a
certain bound. There are two exceptions that override the header
overhead bound:
1) If the bound is impossible to honor, it is relaxed on a
per-size-class basis. Since there is one bit of header
overhead per object (plus a constant), it is impossible to
achieve a header overhead less than or equal to 1/(# of bits
per object). For the current setting of maximum 0.5% header
overhead, this relaxation comes into play for {2, 4, 8,
16}-byte objects, for which header overhead is (on 64-bit
systems) {7.1, 4.3, 2.2, 1.2}%, respectively.
2) There is still a cap on small run size, still set to 64kB.
This comes into play for {1024, 2048}-byte objects, for which
header overhead is {1.6, 3.1}%, respectively.
In practice, this reduces the run sizes, which makes worst case
low-water memory usage due to fragmentation less bad. It also reduces
worst case high-water run fragmentation due to non-full runs, but this
is only a constant improvement (most important to small short-lived
processes).
Reduce the default chunk size from 2MB to 1MB. Benchmarks indicate that
the external fragmentation reduction makes 1MB the new sweet spot (as
small as possible without adversely affecting performance).
Reported by: [1] kientzle
prefix) as an argument and mount point path. At the end it has to find
device name file system is stored on, which means when mount point path is
given, it tries to look into /etc/fstab and find special device
corresponding to the given mount point. This is not perfect, because it
doesn't handle the case when file system is mounted by hand and mount point
is given as an argument.
I found this problem while trying to use snapinfo(8), which passes mount
points to the ufs_disk_fillout(3) function, but I had file system mounted
manually, so snapinfo(8) was exiting with the error below:
ufs_disk_fillout: No such file or directory
I modified libufs(3) to handle those arguments (the order is important):
1. special device with /dev/ prefix
2. special device without /dev/ prefix
3. mount point listed in /etc/fstab, directory exists
4. mount point listed in /etc/fstab, directory doesn't exist
5. mount point of a file system mounted by hand
- moved away from ifn/ifa access to sctp_ifa/sctp_ifn
built and managed by the add-ip code.
- cleaned up add-ip code to use the iterator
- made iterator be a thread, which enables auto-asconf now.
- rewrote and cleaned up source address selection (also
made it use new structures).
- Fixed a couple of memory leaks.
- DACK now settable as to how many packets to delay as
well as time.
- connectx() to latest socket API, new associd arg.
- Fixed issue with revoking and loosing potential to
send when we inflate the flight size. We now inflate
the cwnd too and deflate it later when the revoked
chunk is sent or acked.
- Got rid of some temp debug code
- src addr selection moved to a common file (sctp_output.c)
- Support for simple VRF's (we have support for multi-vfr
via compile switch that is scrubbed from BSD but we won't
need multi-vrf until we first get VRF :-D)
- Rest of mib work for address information now done
- Limit number of addresses in INIT/INIT-ACK to
a #def (30).
Reviewed by: gnn
* Only try to remove the existing item if we're not restoring a directory.
* If unlink fails, try rmdir next.
This should fix the broken --unlink option in bsdtar.
Thanks again to: Kris Kennaway, for beating up bsdtar on pointyhat.
* The ACL formatter was mis-formatting entries which had a
user/group ID but no name. Make the parser tolerant of
these, so that old archives can be correctly restored;
fix the formatter to generate correct entries.
* Fix overwrite detection by introducing a new "FAILED" return
code that indicates the current entry cannot be continued
but the archive as a whole is still sound.
* Header cleanup: Remove some unused headers, add some that
are required with new Linux systems.
- first line is $FreeBSD$
- Reorder special variables: DPADD, LPADD, CFLAGS
- Use = instead of += for variables that are initially empty
- Use space instead of tab after :
- Use one tab after =
- Use .SUFFIXES for section 3 manual page which simplifies Makefile a lot
- Use SHAREDIR instead of /usr/share
- Remove SRCDIR in INCS since we set .PATH properly
- Use plural in variable name when it stands for more that one source file
Reviewed by: ru
Approved by: delphij (mentor)
These tests verify that archive_entry objects can store and return
ACL data and that pax format archives can read and write ACL
information. These do not (yet) test that ACL data is read or
written to disk correctly. (And hence would not have caught the
recent snafu about ACL read-from-disk being turned off.)
ACL data from the archive entry. This doesn't impact
archive_read_extract or archive_write_disk since they only
check for != ARCHIVE_OK when calling this function. (Though
they should be more careful.)
poll(2) or kqueue(2). Previously we rejected fd's higher than FD_SETSIZE
for kevent(2), and larger than sysconf(_SC_OPEN_MAX) for poll(2). However,
the check for poll(2) wasn't really needed. open(2) and socket(2) won't
return an fd you can't pass to either poll(2) or kevent(2). This fixes
a but where gethostbyname() would fail if you had more than 1023 files
open in a process.
MFC after: 1 week
Reviewed by: ume
Found by: ps
child thread goes back to system scope rather than process
scope. This allows an ensuing exec() to actually work.
This change was made a year ago here, but I "forgot" to
commit it :(
Approved by: deischen
MFC after: 3 weeks
Add IMPLEMENTATION NOTES section explaining in detail the effect this
system call has in common use cases involving PF_INET and PF_INET6 sockets.
PR: kern/84761
MFC after: 2 days
behind _FREEFALL_CONFIG). This is done mainly to make NIS even more
resistant to packet loss.
This is not enabled by default for "normal" FreeBSD since it might cause
the server providing the RPC service to be hit heavily with RPC traffic
in case of problems. freefall.FreeBSD.org and hub.FreeBSD.org have been
running with a patch similar to this for a couple of weeks.
MFC after: 1 week
Discussed with: peter
packet loss when talking to a NIS server.
- Set 1 second retry timeout to further realistically handle UDP
packet loss for yp_next packet bursts. If the packet hasn't come
back within 1 second its rather unlikely to come back at all. There
is still back-off mechanism in RPC so if there is another reason
than packet loss for the lack of response within 1 second, the NIS
server will not be totally bombarded with requests.
This reduces the risk of NIS failing with:
yp_next: clnt_call: RPC: Timed out
considerably. This is mainly a problem if you have larger NIS maps
(like at FreeBSD.org) since enumerations of the lists will cause a UDP
packet bursts where a few packets being lost once in a while do
happen.
MFC after: 1 week
Discussed with: peter
Problem mainly diagnosed by: peter
* libarchive_test program exercises many of the core features
* Refactored old "read_extract" into new "archive_write_disk", which
uses archive_write methods to put entries onto disk. In particular,
you can now use archive_write_disk to create objects on disk
without having an archive available.
* Pushed some security checks from bsdtar down into libarchive, where
they can be better optimized.
* Rearchitected the logic for creating objects on disk to reduce
the number of system calls. Several common cases now use a
minimum number of system calls.
* Virtualized some internal interfaces to provide a clearer separation
of read and write handling and make it simpler to override key
methods.
* New "empty" format reader.
* Corrected return types (this ABI breakage required the "2.0" version bump)
* Many bug fixes.
copy the symlink target name, not just copy the reference.
This problem sometimes caused crashes when extracting
symlinks from ISO9660 images.
Thanks to: Diego "Flameeyes" Pettenò
in FreeBSD, and originated from INRIA IPv6.
Stub out netstat reference to addr2ascii() I mistakenly introduced.
Update misleading man page sections.
Merge NetBSD's getnameinfo() AF_LINK extensions for a portable way to
print link-layer addresses given a sockaddr_dl(), minus the IEEE 1394
bits which don't map directly to our code.
Obtained from: NetBSD (getnameinfo.c)
Discussed on: current (March 2006)
acl_from_text.c. Since acl_from_text.c is the only place it
is used, we can now make this internal utility function "static."
As a bonus, acl_set_fd() no longer pulls in getpwuid() for no reason.
MFC after: 7 days
This has no impact unless USE_BRK is defined (32-bit platforms), in
which case user allocations are allocated via mmap() if at all possible,
in order to avoid the possibility of unreclaimable chunks in the data
segment.
Fix an obscure bug in base_alloc() that could have allowed undefined
behavior if an application were to use sbrk() in conjunction with a
USE_BRK-enabled malloc.
called with only one address, we then can call the
generic system call. Also fixes some socket api
type issues and cleans up the "magic" numbers that
were being used in the code.
Reviewed by: gnn
- Restore support for fetching swap information from crash dumps via
kvm_get_swapinfo(3) to fix pstat -T/-s on crash dumps.
Reviewed by: arch@, phk
MFC after: 1 week
Fallout from changing the skip API to use off_t instead of size_t: Print
the skip length using %jd and cast to (intmax_t) instead of %d / (int),
and if ARCHIVE_API_VERSION >= 2, allow the client skipper to be called
for requests longer than SSIZE_MAX. [2]
Approved by: kientzle
Pointy hats to: kientzle [1], cperciva [2]
MFC after: 3 days
Point out that FreeBSD libc has compat stubs for GNU glibc NSS
modules which access NSDB_PASSWD/NSDB_GROUP, but not NSDB_HOSTS;
based on painful experience porting nss_mdns.
Reviewed by: ru
number being returned for mktime and timegm calls. Choose 48 because
that works well. This does reduce the dynamic range of tm_year from
about 2 billion years down to "only" about 9 million years. Please
contact me if this restriction poses a problem.
Due to the complexity of the code, I admit that I didn't trace down
what, exactly, was overflowing with longer bits. This fixes software
that we run on the embedded systems we have.
effective group ID (and any of our group) doesn't match the group ID of the
file, we get EPERM. This doesn't conform POSIX. POSIX requires that we should
return 0, but silently clear the set-gid bit.
a vanilla 2-clause BSD license, but somehow some confusing
extra verbage get copied from somewhere.
Also, update the copyright dates to 2007 for all of the files.
Prompted by: several questions about what those extra words really mean
bogusly used the kvm_powerpc.c file as a template for the license, but
then either wrote the code himself, or cribbed it from the kvm_i386
file. The only thing from the kvm_powerpc.c file was the license.
Correct this mistake with his blessing.
- O_NONBLOCK flag has to be set, if it is not set, open(2) will wait for
another process opening the fifo for reading,
- Use O_WRONLY which implies that the file has to be opened _only_ for write.
This is quite tricky situation, because we allow to open a file with
O_RDONLY|O_TRUNC. O_TRUNC modifies a file, but we actually don't open
it for writing. EISDIR is also returned when we try to open a directory
O_RDONLY|O_TRUNC, which is correct.
POSIX says that "The result of using O_TRUNC with O_RDONLY is undefined.",
we choose to accept it (Solaris did the same), that's why "to be modified"
seems more accurate to me.
Details: As a side-effect of restoring a saved FP environment,
fesetenv() overwrites the tag word, which indicates which i387
registers are in use. Normally this isn't a problem because
the calling convention requires the register stack to be empty
on function entry and exit. However, fesetenv() is inlined, so we
need to tell gcc explicitly that the i387 registers get clobbered.
PR: 85101
wrap this within #if/#else/#endif so that it will only take effect once
ARCHIVE_API_VERSION is increased (which should happen on HEAD some time
between now and when RELENG_7 is branched).
returning the length skipped in a ssize_t to using off_t for both. This
does not break any A[BP]Is, since compression_skip is entirely internal
to libarchive.
If a skip request is > SSIZE_MAX, don't pass it down to the client layer
skip function, since those still uses size_t / ssize_t. Instead, just
read the data and throw it away.
With this commit, libarchive/bsdtar should now successfully skip archive
entries of >2GB on 32-bit systems, but does so slower than necessary.
The performance will improve with a future A[BP]I breaking commit which
makes client layer skip functions use off_t.
Discussed with: kientzle
MFC after: 1 week
functions are required to skip the requested distance, so we can avoid
lots of bookkeeping which would otherwise be necessary.
Reviewed by: kientzle
MFC after: 1 week
members of the ELF Executable Header inside the library-private
`struct _Elf' descriptor and only update the underlying Elf{32,64}_Ehdr
structure on an elf_update(3) call. These fields of the Ehdr
structure are technically `out of bounds' for an application program
per the ELF(3) API, but we've seen applications that initialize
a new Ehdr structure using memcpy(), messing up the library's
invariants. [1]
Implement elf_getphnum() and handle ELF objects with more than
64K program header table entries.
Reported by: jb [1]
conversion of negative numbers to always result in -1.
While at it, rearrange the nearby comment so it fits in 80 chars per line,
like the rest of this file does.
PR: 107130
MFC after: 1 day
chunk per arena, rather than immediately deallocating all unused chunks.
This fixes a potential performance issue when allocating/deallocating
an object of size (4kB..1MB] in a loop.
Reported by: davidxu
they become candidates for reuse. Without this fix, some of the
state from a thread structure's previous incarnation could interfere
with its new one. Specifically, a non-bound thread started as
"suspended" (see pthread_attr_setcreatesuspend_np()) might not get
scheduled at all when resumed, as the "active" flag would be set
spuriously.
Reviewed by: deischen@, davidxu@
MFC after: 1 week
to determine which Elf Types are to be handled. Change the M4
templates to wrap an `#if __FreeBSD_version >= NNN'/`#endif' pair
around the generated code for each ELF data type, where `NNN' is
the OS version where the ELF type was added to the source tree.
This change allows cross-builds of old sources on newer FreeBSD
systems to work correctly.
Problem reported by: ru
