When checking if the newly opened file is the same as the old one,
we need to fstat() the new file descriptor, not the old one again.
Reviewed by: glebius
Sponsored by: Netflix
This option was not tested when WARNS was globally lifted in the src tree up
to 6. Drop WARNS back down to unbreak the build; note that this is still
enabling more warnings than it had before the WARNS change, so the gcc build
may need to be independently evaluated at this level.
PR: 252865
Reported-by: Build Option Servey via Michael Dexter
MFC-after: 3 days
- Use libelf to parse ELF data structures and remove code duplication
for ELF32.
- Don't require the OSABI field to be set to the FreeBSD OSABI for
shared libraries. Both AArch64 and RISC-V leave it set to "none"
and instead depend on the ABI tag note. For ldd, this means falling
back to walking the notes in PT_NOTE segments to find the ABI tag
note to determine if an ELF shared library without OSABI set in the
header file is a FreeBSD shared library.
Reviewed by: kib
MFC after: 5 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D28342
When diff hits certain access errors, function diffreg() shows the error
message, and then returns to the calling function, which calls
print_status() with the return value.
However, in these cases, the return value isn't changed from the initial
default value of D_SAME.
Normally, print_status() with a value of D_SAME does nothing, so this
works out ok, however, if the "-s" flag is set, a message is displayed
showing identicality:
case D_SAME:
if (sflag)
printf("Files %s%s and %s%s are identical\n", path1, entry, path2, entry);
break;
This then produces such results as:
% diff -s /COPYRIGHT /var/run/rpcbind.sock
diff: /var/run/rpcbind.sock: Operation not supported
Files /COPYRIGHT and /var/run/rpcbind.sock are identical
% diff -s /COPYRIGHT /etc/master.passwd
diff: /etc/master.passwd: Permission denied
Files /COPYRIGHT and /etc/master.passwd are identical
Create a D_ERROR status which is returned in such cases, and
print_status() then deals with that status seperately from D_SAME
PR: 252614
MFC after: 1 week
Target value for val has uint32_t type, not uint, adjust used constant.
Change val type to unsigned so that left and right sides of comparision
operator do not expose different signed types of same range [*].
Switch to unsigned long long and strtoll(3) so that 0x80000000 is
accepted by conversion function [**].
Reported by: kargl [*]
Noted by: emaste [**]
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28301
This will allow elfctl on older releases to set bits that are not yet
known there, so that the binary will have the correct settings applied
if run on a later FreeBSD version.
PR: 252629 (related)
Suggested by: kib
Reviewed by: gbe (manpage, earlier), kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28284
Summary:
Steps 5 and 9:
- Update Mentor and Mentee Information
- Update Ports with Personal Information
Reviewers: tcberner, fernape
Reviewed By: fernape
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D28281
This is what amd64 calls the i386 Linux ABI in order to distinguish it
from the amd64 Linux ABI, and matches the nomenclature used for the
FreeBSD ABIs where they always have the size suffix in the name.
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D27647
Some ELF feature flags indicate a request to opt-out of some feature,
for example NT_FREEBSD_FCTL_ASLR_DISABLE indicates that ASLR should be
disabled for the tagged binary. Using "aslr" as the short name for the
flag is confusing as it seems to indicate a request for ASLR to be
enabled. Rename "noaslr", and make a similar change for other opt-out
flags.
Reviewed by: bapt, manu, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28139
I am going to prefix opt-out ELF feature flag names with "no" to make
their meaning more clear (review D28139), but there are some uses of the
existing names already (e.g., the PR referenced below).
For now accept the older, unprefixed name as well, and emit a warning.
We can revert this after FreeBSD 13 branches.
% elfctl -e +aslr foo
elfctl: interpreting aslr as noaslr; please specify noaslr
PR: 239873 (related)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28140
Quite a lot of churn on style, but lots of
good work refactoring complicated functions
and lots more unit-tests.
Thanks mostly to rillig at NetBSD
Some interesting entries from ChangeLog
o .MAKE.{UID,GID} represent uid and gid running make.
o allow env var MAKE_OBJDIR_CHECK_WRITABLE=no to skip writable
checks in InitObjdir. Explicit .OBJDIR target always allows
read-only directory.
o add more unit tests for META MODE
Merge commit '8e11a9b4250be3c3379c45fa820bff78d99d5946' into main
Change-Id: I464fd4c013067f0915671c1ccc96d2d8090b2b9c
This may allow an identical elfctl invocation to be used on multiple
FreeBSD versions, with features not implemented on older releases being
silently ignored.
PR: 252629 (related)
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28130
-s causes cmp to print nothing for differing files, for use when only
the exit status is of interest.
-z compares the file size first, for regular files, and fails the
comparison early if they do not match.
Prior to this change -s implied -z as an optimization, but this is not
valid when file offsets are specified. Now, enable the -z optimization
for -s only if both skip arguments are not provided / 0.
Note that using -z with differing skip values will currently always
fail. We may want to compare size1 - skip1 with size2 - skip2 instaead,
and in any case the man page should be clarified.
PR: 252542
Fixes: 3e6902efc8
Reported by: William Ahern
Reviewed by: markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28071
ldd had #defines for AOUT, ELF, and ELF32. The removal of AOUT left a
possibly confusing gap. These are not used anywhere but this file so
renumber to avoid the gap.
Reported by: allanjude
Previously -q (just print a line when files differ) ignored flags like
-w (ignore whitespace). Avoid the D_BRIEF short-circuit when flags are
in effect.
PR: 252515
Reported by: Scott Aitken
Reviewed by: kevans
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28064
Add two simple examples showing the use of the flags: d, n, s, t
While here, reorder cross references properly by section
Bump .Dd
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D27540
last(1): Bump .Dd
Add some examples showing the use of the flags: a, k, P, w
Reviewed by: gbe@, yuripv@
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D27545
Userland aout support has not been required since FreeBSD 2.x.
If someone needs to use FreeBSD 2 shared libraries they will be best
served by using a FreeBSD 2 ldd, perhaps as part of a jail with a full
FreeBSD 2.x install.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27478
The current version of this test will effectively pass as long as one of the
specified paths is in the output, and it could even be a subset of one of
the paths.
Strengthen up the test a little bit:
* Specify beginning/end anchors for each path
* Add egrep -v checks to make sure we don't have any *additional* paths
* Ratchet down paths2 to exactly the two paths we expect to appear
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D27984
This test attempts to use \t (tab intended) in a grep expression. With the
former /usr/bin/grep (i.e. gnugrep), this was interpreted as a literal 't'.
The expression would work anyways because the tr(1) usage would ultimately
replace all of the spaces with a single newline, and they would match the
paths whether they were correctly fromatted or not.
Current /usr/bin/grep (i.e. bsdgrep) is less-tolerant of ordinary-escapes, a
property of the underlying regex(3) engine, to make it easier to identify
when stuff like this happens. In-fact, this expression broke after the
switch happened.
This revision does the bare basics to fix the usage by using a printf to get
a literal tab character to insert into the expression. It also swaps out the
manual insertion of the line prefix into the grep expression by pulling
that part out of $sep and reusing it for the leading path.
The secondary issue was the tr(1) usage, since tr would only replace the
first character of string1 with the first character of string2. This has
instead been replaced by a sed expression, which similary understands \n to
be a newline on all supported versions of FreeBSD. Each path now gets
prefixed with the appropriate context that should be there (i.e. numeric
sequence followed by a tab).
PR: 252446
Reviewed by: emaste, ngie
Differential Revision: https://reviews.freebsd.org/D27983
As suggested in D27598. This also supports MK_WERROR.clang=no and
MK_WERROR.gcc=no to support the existing NO_WERROR.<compiler> uses.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D27601
While here:
- Split synopsis into two parts. The first explains how to record
sessions, while the second one explains how to replay (some of)
the recorded sessions.
- Fix the -width argument of the environment variables list.
MFC after: 1 week
- Ignore malformed directory entries as created by Dropbox ("/").
(rev 1.24)
- Use libarchive 3.x interface: check result for archive_read_free()
and don't call archive_read_close manually. (rev 1.23)
- Always overwrite symlinks on extraction, ever if they're newer than
entries in archive.
- Use getline() rather than getdelim().
PR: 231827
Submitted by: ak
Reviewed by: mm
Obtained from: NetBSD
MFC after: 2 weeks
sockstat can "hang" on getpwuid() calls in situations when FreeBSD
is joined to a directory service (AD/LDAP etc) and the directory
service fail to answer in a timely manner when trying to resolve
numeric UIDs to user names.
Submitted by: Caleb St. John <caleb@ixsystems.com>
MFC after: 1 week
Add two simple examples. In this case I opted to show a small portion of
the output since it helps to understand what the tool does. It shows the use
of the -t flag too.
PR:
Submitted by:
Reported by:
Reviewed by: gbe@
Approved by: manpages (bcr@)
Obtained from:
MFC after:
MFH:
Relnotes:
Security:
Sponsored by:
Differential Revision: https://reviews.freebsd.org/D27543
