- Only declare mouse menus if WITH_MICE.
- Only declare syscons menus if WITH_SYSCONS.
- Only declare fdisk editor functions if WITH_SLICES.
Approved by: re
WITH_SYSCONS is defined.
- Only define mouse menus and mouse menu items if WITH_MICE is defined.
- Use WITH_SLICES instead of explicit lists of architectures to control
the layout of menus dependent on if slices are used on this arch or not.
- Only include the linux startup option if WITH_LINUX is defined.
- Only include the SVR4 startup option on i386. It doesn't work on sparc64,
and it is debatable that it even works on i386.
- Change the OSF1 startup option to execute configOSF1() instead of just
setting the variable so that /compat/osf1 gets created.
Tested on: i386, alpha, sparc64
Approved by: re
fdisk editor if WITH_SLICES. Before this on arch's that didn't support
slices such as alpha and sparc64 you would drop into the fdisk editor after
doing an Undo in the label editor.
Approved by: re
of an explicit list of architecture defines.
- Tweak the message prior to the label editor in the !WITH_SLICES case to
make it slightly less awkward since this is the first dialog we see after
starting an install.
- Only offer to customize syscons settings if WITH_SYSCONS.
- Offer to enable Linux compat if WITH_LINUX. Before we only did this for
i386.
- On the alpha, offer to enable OSF/1 compat after asking about Linux
compat.
- Only offer to configure moused(8) if WITH_MICE is defined.
Tested on: i386, alpha, sparc64
Approved by: re
and more maintainable.
- WITH_SYSCONS: defined on all arch's that support syscons (currently i386,
alpha, and ia64)
- WITH_MICE: defined on all arch's that support moused(8) (currently i386,
alpha, and ia64)
- WITH_SLICES: defined on all arch's that use disk slices (currently i386
and ia64)
- WITH_LINUX: defined on all arch's that support Linux binary compat
(currently i386 and alpha)
Approved by: re
the two GNOME 1-based alternatives.
While here, note that a majority of the items in this menu are not
sentences, and remove trailing dots to make the remainder consistent.
Reviewed by: marcus
Approved by: re (bmah)
Has been seen to work on several cards and communicating with
several mobile phones to use them as modems etc.
We are still talking with 3com to try get them to allow us to include
the firmware for their pccard in the driver but the driver is here..
In the mean time
it can be downloaded from the 3com website and loaded using the utility
bt3cfw(8) (supplied) (instructions in the man page)
Not yet linked to the build
Submitted by: Maksim Yevmenkin <myevmenk@exodus.net>
Approved by: re
of the EFI file system. This makes the EFI partition non-optional.
I don't think that the links are actually correct, given that all
the mount points are under /mnt when sysinstall is run as init.
(ie a non-upgrade). Thus: I think I need to go in once more, but
at least this doesn't get lost...
NTP on FreeBSD:
The first one allows one to avoid installing the html files.
The second one allows one to override the CLOCKDEFS on the
make command line.
Submitted by: phk
time_t. Deal with the possibility that time_t != int32_t. This boils
down to this sort of thing:
- time(&ut.ut_time);
+ ut.ut_time = time(NULL);
and similar for ctime(3) etc. I've kept it minimal for the stuff
that may need to be portable (or 3rd party code), but used Matt's time32
stuff for cases where that isn't as much of a concern.
Approved by: re (jhb)
the specified filename of the log to be rotated is in fact shell glob
pattern. In this case, all files matching this pattern will be rotated
using the same options. Useful in the case when there is no pre-defined
name for the logfiles (e.g. xtradius, samba etc).
Sponsored by: PortaOne Software Ltd
MFC after: 2 weeks
partitions marked as being of type efi. This change adds code to
1. actually run the newfs command at mount time (install.c),
2. display the newfs state on screen (label.c)
3. allow toggling of the newfs state (label.c)
Even though newfs(8)-ing FAT partitions can be of use on i386
machines in general, it has been opted to minimize impact for
now.
With this change there's no a priori difference between EFI and
FAT partitions. With this change and the corresponding change to
libdisk, we can create EFI partitions, just like regular FAT
partitions.
the loop that runs through the environment variables to be a bit more
intuitive. Also, change some 'continue's in failure cases to 'break's
instead. If we are going to fail, we should just do it.
PR: bin/40654
Submitted by: Thomas Zenker <thz@Lennartz-electronic.de> (partially)
argument as of revision 1.52 (July 12, 1996, about a month after I
graduated from high school) when 'newfs -u' support was axed, so remove it.
This also allows us to remove a hack in the create partition case where we
created the partition twice since we didn't have the size the first time.
is instead of the usual 022 umask, and explain that what the scheme
still prevents is unwanted changes, not prying eyes.
While I'm here, mess with the phrasing and line-breaks a bit.
the module compiled in or loaded instead of bogusly checking for ppp0.
Also if and only if the caller is actually root and the kernel does not
have ppp support, try to load the ppp module before giving up.
- Disabled 'Syscons, Font', 'Syscons, Screenmap' and 'Syscons, Ttys' menus
on pc98.
- Fixed the MenuMouseType and MenuMousePort menus for pc98.
- Fixed some comments for pc98.
branch and a few new drivers. See contrib/ntp/ChangeLog for details.
Hide kernel header sys/lock.h from ntp [1]
PR: bin/33914
Submitted by: thomas, bde[1]
MFC after: 1 month
files. Basically wrappers for mac_{get,set}_{file,link,pid,proc}(3).
Man pages to be updated shortly.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
* Change atapi-cd ioctls to use the same units.
* Change burncd, cdcontrol to convert CDROM speed to KB/sec before
calling the ioctl. Add a "max" speed option for their command lines.
This change does not break ABI but does change the units passed through
the ioctl so 3rd party software that uses cdrio.h will have to convert
(most likely by multiplying CDROM speed by 177 to get KB/s).
PR: kern/36845
Submitted by: Philipp Mergenthaler <p@i609a.hadiko.de> (CAM ioctls)
Reviewed by: sos, ken
MFC after: 1 month
something applies to. So change #ifndef to an explicit list of defines.
* Treate sparc64 and ia64 as 64-bit platforms, which means larger roots.
* sparc64 should halt back to the firmware, not reset.
* sparc64 doesn't need to play MS-DOS/BIOS partition crap games.
Reviewed by: jake
the command should not follow the symlink if the target file is a
symlink. Invoke the extattr_*_link(2) version of the system call
in that situation, instead of extattr_*_file(2). This is
consistent with other attribute management tools in the system.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
osreldate.
(Actually, due to differences in package compression formats, I'm
not sure that a -CURRENT pkg_add -r will do the right thing in
this case, once it finds them.)
revision 1.101 (which did not introduce the bug but made it harder to fix)
PR: misc/40363
Submitted by: David Dunham <dwdunham@isilon.com>
MFC after: 2 weeks
Peter had repocopied sys/disklabel.h to sys/diskpc98.h and sys/diskmbr.h.
These two new copies are still intact copies of disklabel.h and
therefore protected by #ifndef _SYS_DISKLABEL_H_ so #including them
in programs which already include <sys.disklabel.h> is currently a
no-op.
This commit adds a number of such #includes.
Once I have verified that I have fixed all the places which need fixing,
I will commit the updated versions of the three #include files.
Sponsored by: DARPA & NAI Labs.
it as being in range.
set ifaddr 1.2.3.4/0 5.6.7.8/0
no longer allows 0.0.0.0 as a valid IP.
Reported/tested by: Bohdan Horst <nexus@hoth.amu.edu.pl>
MFC after: 3 days
that already exists for hosts: being able to specify a section that applies
to every program *except* the one in question.
The normal syntax for program specification is still valid. For the new
capability, one uses:
!-program
Since there is no way to specify a program beginning with a dash in the old
syntax, as it would be interpreted as the case above, the following
alternative syntax to the original capability is provided:
!+program
This shouldn't introduce incompatibilities with any syslogd configuration
in production because -stable's syslogd does not support a dash anywhere in
the program specification.
MFC after: 2 weeks
hack, thereby allowing future extensions to the structure (e.g., for extended
attributes) without rebreaking the ABI. FTSENT now contains a pointer to the
parent stream, which fts_compar() can then take advantage of, avoiding the
undefined behavior previously warned about. As a consequence of this change,
the prototype of the comparison function passed to fts_open() has changed
to reflect the required amount of constness for its use. All callers in the
tree are updated to use the correct prototype.
Comparison functions can now make use of the new parent pointer to access
the new stream-specific private data pointer, which is intended to assist
creation of reentrant library routines which use fts(3) internally.
Not objected to in spirit by: -arch
suffix attempts before failing. No need to try again by hand,
particularly when it fills your log with failures because
localhost.example.com..example.com fails to resolve. Also improve the
log message that helped find this error.
There is still (maybe) an uninitialised pointer problem here, but in a
month of testing I haven't triggered it.
minted -v flag.
o Print devices that don't return a name as 'unknown' in -v mode.
# Yea! Now I wont think I have 10 different ISA network adapters in my
# laptop.
synopsis, and the man page description ("selector" vs. "sel" and
"addr" vs. "reg").
Fix the usage message and man page synopsis to show that the "value"
argument is not optional.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
to control the mapping of things like the ACPI and APM into memory.
The problem is that starting X changes these values, so if something
was using the bits of BIOS mapped into memory (say ACPI or APM),
then next time they access this memory the machine would hang.
This patch refuse to change MTRR values it doesn't understand,
unless a new "force" option is given. This means X doesn't change
them by accident but someone can override that if they really want
to.
PR: 28418
Tested by: Christopher Masto <chris@netmonger.net>,
David Bushong <david@bushong.net>,
Santos <casd@myrealbox.com>
MFC after: 1 week
included into pkg_install according to the content of /var/db/pkg_install.conf
file, which specifies version and alternative location of the tools. Format
of the said file is very simple: one line which specifies revision of the
alternative version of the tools and their location separated by space,
i.e.:
20030102 /usr/local/sbin
This would allow bsd.port.mk to install and use up to date version of tools
on older system from ports.
Also add new `-P' flag to pkg_info, which causes it to report currently
installed version of package tools.
Discussed with: will
ports/INDEX, by allocating eactly amount of memory necessary for storing
each particular entry, insdead of 4K per entry (more than 7000 entries -
go figure). Memory consumption went down to some 500K from some 30M.
files are located at the very beginning of the package, this patch in
conjuction with latest tar(1) --fast-mode fix greatly speeds up pkg_info(1)
operation on package files.
MFC after: 1 week
for it.
While I'm here, add a the ability to say "!level" in a way which
should be compatible with Linux's syslogd.
PR: 28935
No objections: audit
MFC after: 2 weeks
declared - it was bad style and caused a bug. v[46]bind need to be
reset whenever we go to the "more:" label.
Jean-Luc and I came up with this patch independently, so it had
better be right!
PR: 40771
Submitted by: Jean-Luc Richier <Jean-Luc.Richier@imag.fr>
This will replace the existing getextattr(8) and setextattr(8) with
a single binary responding to the names getextattr, setextattr,
rmextattr and lsextattr.
This program is not yet connected to the build.
Sponsored by: DARPA and NAI Labs.
contributor)
- support ipv6cpretry and ipv6cpretries, which are IPv6 versions
of ipcpretry and ipcpretries.
- improve handling of IPv6 link-local addresses
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
from the dialler, usually indicating success or failure. Add -v to add
verbose responses in addition to return values indication success or
failure. Update man page.
EHOSTDOWN. These are often transient errors (when the remote host
reboots, temporary network problems, etc.), and we'd rather err on the
side of caution and keep trying send messages that never arrive than
just give up.
Note that this is not an implementation of the "back-off" methods
given in the PR. Those just seem too complicated. Why not just keep
trying each time? Trying and failing doesn't really consume
significantly more resources than if we were successful for each
message.
PR: bin/31029
MFC after: 1 week
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
Be (somewhat) prepared for things to change size under us.
Recognize a empty attribute name as magic and print the list of attributes.
Use <err.h> for code clarity.
Deal with zero length returns.
Sponsored by: DARPA & NAI Labs.
