card insert/remove events on controllers that don't implement the insert
and remove interrupts.
Bridge drivers can set a new slot option, SDHCI_NON_REMOVABLE, to indicate
non-removable media (such as eMMC). The sdhci driver will not enable
insert/remove interrupts, and sdhci_generic_get_card_present() will always
return true.
Bridge drivers can set a new quirk, SDHCI_QUIRK_POLL_CARD_PRESENT, and the
sdhci driver will not enable insert/remove interrupts, and instead will use
a callout to poll the card-present status at 5 Hz.
For bridge drivers that get notified of card insert/remove via gpio
interrupts, there is a new sdhci_handle_card_present() function they can
call from the gpio interrupt handler to inform the sdhci code of the event.
In addition to adding these new features, the existing code to debounce card
insertions was updated to use taskqueue_enqueue_timeout() instead of
scheduling a callout to do the taskqueue_enqueue(). There is also now a
comment explaining that insertion-debounce is what's going on -- it took me
a long time to realize that's what the old sdhci_card_delay() routine was
really doing. There is no functional difference between the old and new
debounce code (I hope!).
Use device-specific Rx buffer size to ensure that data will not be
truncated + add a warning if truncation was detected (the driver
cannot handle this case correctly yet).
Tested with:
- RTL8188CUS, RTL8188EU and RTL8821AU, STA / AP modes.
There are places where checks are made against VM_MAX_KERNEL_ADDRESS, or
virtual_end (set to VM_MAX_KERNEL_ADDRESS). With 32-bit checks, an address will
always be less than or equal to 0xffffffff. Drop a page, so those checks can
terminate loops safely.
This prevented the device from attaching with a
Windows guest (most other guests use the device type
for matching)
PR: 212711
Submitted by: jbeich
MFC after: 3 days
in the first byte of the 3-byte mouse data report.
Plan9/9front requires this.
Switch over to using #defines for the data report bits.
Verified no regression on Win10/Fedora-live.
Reported and tested by: Trent Thompson (trentnthompson at gmail com)
MFC after: 1 week
With clang 4.0.0, I'm getting the following warnings:
sys/geom/vinum/geom_vinum_state.c:186:7: error: logical not is only
applied to the left hand side of this bitwise operator
[-Werror,-Wlogical-not-parentheses]
if (!flags & GV_SETSTATE_FORCE)
^ ~
The logical not operator should obiously be called after masking.
Reviewed by: mav, pfg
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9093
This function is used only by ipsec_getpolicybysock() to fill security
policy index selector for locally generated packets (that have INPCB).
The function incorrectly assumes that spidx is the same for both directions.
Fix this by using new direction argument to specify correct INPCB security
policy - sp_in or sp_out. There is no need to fill both policy indeces,
because they are overwritten for each packet.
This fixes security policy matching for outbound packets when user has
specified TCP/UDP ports in the security policy upperspec.
PR: 213869
MFC after: 1 week
Inums in cd9660 refer to byte offsets on the media. DVD and BD media
can have entries above 4GB, especially with multi-session images.
PR: 190655
Reported by: Thomas Schmitt <scdbackup at gmx.net>
And HP x2 210, per DragonFlyBSD 240bd9cd58f8259c12c14a8006837e698.
Submitted by: Johannes Lundberg <yohanesu75 at gmail.com>
No objection: gonzo@
Obtained from: DragonFlyBSD
This is a skeleton set based on ieee80211_ht.c. It implements some IE
parsing, some basic unfinished negotiation, and channel promotion/demotion.
However, by itself it's not enough to do VHT - notably, the actual
channel promotion for STA mode at least is done in ieee80211_ht.c as
part of htinfo_update_chw(). I was .. quite amused when I found that
out.
I'm checking this in so others can see progress rather than one huge
commit when VHT is "done" (which will likely be quite a while.)
Many embedded SoC controllers that are (more or less) sdhci-compatible don't
implement card detect, and the related values in the PRESENT_STATE register
aren't useful. A bridge driver can now implement get_card_present() to read
a gpio pin or whatever else is necessary for that system.
The default implementation reads the CARD_PRESENT bit from the PRESENT_STATE
register, so existing drivers will keep working (or keep not-fully-working,
since many drivers right now can't detect card insert/remove).
Nowadays it's not necessary to compute network mask from the IP address and
compare to given by DHCP.
Submitted by: kczekirda
Reviewed by: glebius, bapt
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D8740
libstdc++ before gcc r244057 expected that libc provided
__cxa_thread_atexit_impl, and libstdc++ implemented
__cxa_thread_atexit, by forwarding the calls to _impl. Mentioned gcc
revision checks for __cxa_thread_atexit in libc and does not provide
the symbol from libstdc++ if found.
This change helps older gcc, in particular, all released versions
which implement thread_local, by consolidating the implementation into
libc. For that versions, if configured with the current libc, the
__cxa_thread_atexit is exported from libstdc++ as a trivial wrapper
around libc::__cxa_thread_atexit_impl.
The __cxa_thread_atexit implementation is put into separate source
file to allow for static linking with older libstdc++.a.
gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78968
Reported by: Hannes Hauswedell <h2+fbsdports@fsfe.org>
PR: 215709
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
contrib/ngatm/snmp_atm/snmp_atm.c:173:6: error: logical not is only
applied to the left hand side of this bitwise operator
[-Werror,-Wlogical-not-parentheses]
if (!ifmr.ifm_status & IFM_AVALID) {
^ ~
Obviously, the masking needs to be done before the logical not
operation. Add parentheses to make it so.
MFC after: 3 days
sched_*(2) syscalls might be not available at runtime. Defining this
constant as zero directs POSIX-compliant code to call sysconf(3) to
detect the feature at runtime, and forces libc sysconf(3) to ask
kernel.
Noted by: ngie
Reviewed by: jilles, ngie
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D9055
Siena has limitation on maximum byte count and 4k boundary crosssing
(which is stricter than maximum byte count).
EF10 has limitation on maximum byte count only.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9061
It is safer to consider EFX_LINK_UNKNOWN as link down.
link_mode is set to EFX_LINK_UNKNOWN on port stop and fini.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9060
