The emalloc set of error-checking memory allocation routines were added
to libnetbsd in r316572. Use them in makefs to reduce differences with
NetBSD.
NetBSD revs:
cd9660.c 1.39
ffs.c 1.56
makefs.c 1.42
walk.c 1.27
cd9660/cd9660_archimedes.c 1.2
cd9660/cd9660_eltorito.c 1.20
cd9660/cd9660_write.c 1.16
cd9660/iso9660_rrip.c 1.12
ffs/buf.c 1.17
ffs/mkfs.c 1.26
Obtained from: NetBSD
This variable was used 4 times in 1 function and all uses were wrong.
The 4 uses were in he test_frame() (show) function, to try to restore
4 colors, 2 unnecessarily and these 2 now broken. This was wrong
because it is the previous colors that must be restored, but the global
holds the original colors. Excessive setting of colors at the end
restored the previous colors correctly in most cases, but I removed
this a couple of revisions ago.
Originally, this variable had 1 correct use, to test for being on a vty
as a side effect of initializing it. This is now down in init(), and
init() also leaves a better-named global with the same contents.
Fix this by reading the current console info into a local variable in
test_frame(), as is done for several other functions. Fix style bugs
in this reading for all callers:
- extra blank lines
- all error messages different. The first one now in init() is not as
specific as the old one, but it is after a different specific one for
another ioctl and is unlikely to be reached when the first ioctl
succeeds. Ones after the first are to repeat the ioctl, so are even
more likely to be reached. The correctness of full removal of the
old global depends on the error handling for failure to initialize
it being unreachable.
- err() instead of warn() for failure in load_font(). This is almost
unreachable, and it makes no sense to continue after undoing previous
changes with revert().
- unreachable return after err() for failure in dump_screen().
Undo large renaming of local variables from the good name 'info' to the
bad name _info, which was done to protect the buggy global's bad name
from -Wshadow warnings.
Change 25 uses of errc() to err(). 2 of these were correct. 23 used
errno for the arg so were just a verbose spelling of err(). 5 of these
were just style bugs, and 18 depended on revert() saving errno.
1 warn() also depended on revert() saving errno.
Remove 2 warnx()'s that duplicate the message from a later errx().
These used to be before returns, and should have reported errno in
some cases. errno is also not reported for for openguess() failures.
Only "restore" the video mode in revert() if the mode was just set
(necessarily partially). Setting the mode to its current setting
doesn't "restore" it, but resets it, with the least harmful change
being to clear the screen. revert() is called even for some harmless
syntax errors and usually did nothing except reset the mode. Now it
usually does nothing. The only things that it tries to restore apart
from the mode are the active vty number, the screen map, 2 colors that
only need to be restored (only after a mode change) to fix kernel bugs,
and 3 colors that can't be restored due to kernel bugs. (This is
mostly for sc, since vt doesn't support mode changes.)
revert() is not called for syntax and setting errors after [mode], so
the mode reset is only done for failures to set raster mode after
setting graphics mode. normal colors can only be set after [mode],
and that is why reverting them should be unnecessary.
r146736 added an undocumented syntax and many bugs handling it. The
documented syntax is "... [mode] [fg [bg]] [show]", where it is critical
for reducing ambiguity and keeping things simple that the mode is
parsed first. r146736 added buggy support for "... [mode] [fg [bg]]
[show] [mode] [fg [bg]]". One error was that after for failing to set
a partially-supported graphics mode, argv[optind] remains pointing to
the mode so doesn't match the first [fg [bg]], so the setting is
attempted again, with slightly worse error handling.
Fix this by removing it (support for the trailing '[mode] [fg [bg]]')
and cleaning up. The cleanups are mostly to remove convolutions and
bugs that didn't work to handle the ambiguous syntax '[fg [bg]] [fg [bg]]'
when [mode] and [show] are not present. Globals were set to allow
repeating the color settings at the end. The functions that set the
colors earlier were misnamed from set* to get*. All that they "got" is
is settings from argv. They applied the settings to the kernel and
the globals.
Fix restoration of colors in revert() by restoring 2 after the mode
change. Colors should not need to be restored, but a bug in scteken
clobbers them on any mode change, including ones for restoration. Don't
move the restoration of the other 3. Teken doesn't clobber them on
mode changes because it doesn't support them at all (sc still supports
the border color, but only using a non-teken ioctl).
Add restoration of colors after a successful mode change to work around
the scteken bug there too. The bug was previously masked by the general
setting of colors at the end.
Fix a longstanding parsing/error handling bug by exiting almost immediately
after matching the [mode] arg but failing to set the mode. Just revert
if necessary. Don't return to continue parsing but do it wrong. This
bug caused spamming the output with a usage() message and exiting with
status 1 whenever [mode] is not present bug [fg [bg]] or [show]. The
exit code 1 was actualy an ambiguous internal code for failure to match
[mode] or failure to set [mode]. This 1 was obfuscated by spelling it
EXIT_FAILURE, but actual exit codes spell EXIT_FAILURE as 1. Remove
another global which could have been used to disambiguate this but was
only used to micro-optimize the (unnecessary except for other bugs)
setting of colors at the end.
attempts to keep them that way. The bg brightness bit is interpreted
as blinking in some modes, but it would barely be useful to disallow
setting it when it would give blinking in code which knew when that
is. The old code mostly knew this wrong, and added handling errors.
It is in fact impossible to know, since future mode switches may
change the meaning of the bit many times on the screen and in history.
Old versions of vidcontrol disallowed bg color numbers >= 8 in all
cases. This is very VGA/syscons-centric. Syscons uses the VGA defaults
of blinking fg instead of bright bg in text mode and bright bg in
graphics mode. On VGA, this is very easy to toggle at any time, and
vt blows away the VGA text mode default at boot time.
r146736 changed this to try to allow bg color numbers in graphics mode
only. This is even more VGA/syscons-centric, and there are many bugs
in this, and many nearby bugs in the parser. These are increased or
decreased by differences and bugs in vt and teken.
Perhaps the most obvious bug was that almost any vidcontrol command
which changes any color or the mode causes an error if the initial fg
color is bright. E.g., in syscons text mode, after "vidcontrol
lightwhite" to make the fg bright, another "vidcontrol lightwhite" is
rejected and buggy fixup code changes the fg to white. This is because
the bright fg color creates a bright bg color for the phantom reverse
video attribute, so was rejected. (The reverse video attribute is
phantom because teken ignores the user's setting of it and simply
reverses the fg attributes to create the bg attributes. Sometimes
some layer masks off the brightness/blinking bit, but not here.)
Perhaps the next most obvious one was that "vidcontrol lightgreen
lightblue" was misparsed as 2 settings of the fg instead of 1 setting
of the fg and 1 invalid setting of the bg. This is because the
parser supports an undocumented syntax with many parsing bugs (an
ambiguity gives this one).
I recently fix bugs in teken that broke setting of bright fg's and
bg's in the normal way. This gave more settings of then, so the old
bugs showed up more often.
Multiple periodic scripts sleep for a random amount of time in order to
mitigate the thundering herd problem. This is bad, because the sum of
multiple uniformly distributed random variables approaches a normal
distribution, so the problem isn't mitigated as effectively as it would be
with a single sleep.
This change creates a single configurable anticongestion sleep. periodic
will only sleep if at least one script requires it, and it will never sleep
more than once per invocation. It also won't sleep if periodic was run
interactively, fixing an unrelated longstanding bug.
PR: 217055
PR: 210188
Reviewed by: cy
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D10211
The goal of this work is to remove the explicit dependency for ctl(4)
on iscsi(4), so end-users without iscsi(4) support in the kernel can
use ctl(4) for its other functions.
This allows those without iscsi(4) support built into the kernel to use
ctl(4) as a test mechanism. As a sidenote, this was possible around the
10.0-RELEASE period, but made impossible for end-users without iscsi(4)
between 10.0-RELEASE and 11.0-RELEASE.
Automatically load cfiscsi(4) from ctladm(8) and ctld(8) for backwards
compatibility with previously releases. The automatic loading feature is
compiled into the beforementioned tools if MK_ISCSI == yes when building
world.
Add a manpage for cfiscsi(4) and refer to it in ctl(4).
Differential Revision: D10099
MFC after: 2 months
Relnotes: yes
Reviewed by: mav, trasz
Sponsored by: Dell EMC Isilon
Coverity warns that it is invalid to access following struct members by
accessing the current struct member pointer plus one. Assuming the
compilers aren't abusing this kind of UB yet, this cleanup isn't a
functional change.
Reported by: Coverity
CID: 1368713
Sponsored by: Dell EMC Isilon
This is a collection of minor changes as diff reduction against NetBSD.
NetBSD revs:
cd9660.c 1.39
cd9660.h 1.19
makefs.c 1.34
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
- Add a new "qsize" parameter in audit_control and the getacqsize(3) API to
query it, allowing to set the kernel's maximum audit queue length.
- Add support to push a mapping between audit event names and event numbers
into the kernel (where supported) using new A_GETEVENT and A_SETEVENT
auditon(2) operations.
- Add audit event identifiers for a number of new (and not-so-new) FreeBSD
system calls including those for asynchronous I/O, thread management, SCTP,
jails, multi-FIB support, and misc. POSIX interfaces such as
posix_fallocate(2) and posix_fadvise(2).
- On operating systems supporting Capsicum, auditreduce(1) and praudit(1) now
run sandboxed.
- Empty "flags" and "naflags" fields are now permitted in audit_control(5).
Many thanks to Christian Brueffer for producing the OpenBSM release and
importing/tagging it in the vendor branch. This release will allow improved
auditing of a range of new FreeBSD functionality, as well as non-traditional
events (e.g., fine-grained I/O auditing) not required by the Orange Book or
Common Criteria.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, AFRL
MFC after: 3 weeks
naming scheme
usr.bin/diff/diff_test was renamed to usr.bin/diff/netbsd_diff_test
to avoid collisions with the renamed FreeBSD test.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Call `Delete(..)` (a free(3) wrapper) on `name` when bailing from the
function.
Submitted by: Tom Rix <trix@juniper.net>
Reviewed by: ngie
Differential Revision: D10097
Sponsored by: Dell EMC Isilon, Juniper
There is no behavioral difference, as it's just swapping
out the name of two identically-valued constants.
Submitted by: Vicki Pfau (vi AT endrift.com)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9597
This is a painful change, but it is needed. On the one hand, we avoid
modifying them, and this slows down some ideas, on the other hand we still
eventually modify them and tools like netstat(1) never work on next version of
FreeBSD. We maintain a ton of spares in them, and we already got some ifdef
hell at the end of tcpcb.
Details:
- Hide struct inpcb, struct tcpcb under _KERNEL || _WANT_FOO.
- Make struct xinpcb, struct xtcpcb pure API structures, not including
kernel structures inpcb and tcpcb inside. Export into these structures
the fields from inpcb and tcpcb that are known to be used, and put there
a ton of spare space.
- Make kernel and userland utilities compilable after these changes.
- Bump __FreeBSD_version.
Reviewed by: rrs, gnn
Differential Revision: D10018
- Check the return from a call to malloc() in skim_printcap(), and
return a NULL if that fails.
- Fix a small memory leak in main() that happens if skim_printcap()
returns an error, including the new error-return of NULL.
Submitted by: Tom Rix <trix@juniper.net>
Reviewed by: pfg, ngie
MFC after: 4 weeks
Sponsored by: Dell EMC Isilon, Juniper
Differential Revision: D9954, D9982
getaddrinfo fails
If the asprintf call fails, fall back to the old code (as a last ditch effort
to provide the end-user with helpful output).
Sponsored by: Dell EMC Isilon
- Make the explanation more complete
- Correct a minor grammar nit with verb tense.
- Don't emit the message if `pe->pe_name` is NULL (it doesn't
have much value).
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Free `f` if an unknown priority or facility is parsed with the function.
MFC after: 1 week
Reported by: Coverity
CID: 1368068
Sponsored by: Dell EMC Isilon
- main(..): free memory assigned to fdsr before calling die(..).
- allowaddr(..): free memory assigned to ap before returning from the
function early. Add a `err` goto label to reduce freeaddrinfo/free(ap)
logic duplication.
MFC after: 1 week
X-MFC notes: some of this is dependent on refactoring not MFCed
Reported by: clang static analyzer, Coverity
CID: 1367750 (ap leakage in allowaddr(..))
Submitted by: Tom Rix <trix@juniper.net>
Reviewed by: ngie
Sponsored by: Dell EMC Isilon, Juniper
Differential Revision: D10004
