Commit Graph

1334 Commits

Author SHA1 Message Date
emax
3fc0b380c6 avoid holding PCB mutex during copyin/copyout()
Reported by:	imp, mms dot vanbreukelingen at gmail dot com
Reviewed by:	imp
2019-08-30 16:35:31 +00:00
delphij
1347212622 Convert ng_deflate to use new zlib.
This removes the last consumer of the modified zlib originally
bundled with Paul's PPP implementation, which will be removed
in a follow up commit.

PR:			229763
Differential Revision:	https://reviews.freebsd.org/D21186
2019-08-23 07:24:36 +00:00
delphij
86c98d165a Use MTX_NEW instead of bzero().
Submitted by:	cem
2019-08-21 08:15:30 +00:00
delphij
c9729c2d18 Fix a panic in ubt_do_hci_request.
The 'mtx' is on stack and can contain garbages that would cause mtx_init
(and in turn lock_init) to think that the mutex was already initialized.
2019-08-21 07:45:39 +00:00
wulf
c83c64153a ng_ubt(4): do not attach Intel Wireless 8260/8265 in bootloader mode.
Add helper function for synchronous execution of HCI commands at probe
stage and use this function to check firmware state of Intel Wireless
8260/8265 bluetooth devices found in many post 2016 year laptops.

Attempt to initialize FreeBSD bluetooth stack while such a device is in
bootloader mode locks the adapter hardly so it requires power on/off
cycle to restore.

This change blocks ng_ubt attachment unless operational firmware is
loaded thus preventing the lock up.

PR:			237083
Reviewed by:		hps, emax
MFC after:		2 weeks
Differential Revision:	https://reviews.freebsd.org/D21071
2019-08-18 22:11:42 +00:00
glebius
8a5caee402 Remove 'dir' argument in ng_ipfw_input, since ip_fw_args now has this info.
While here make 'tee' boolean.
2019-03-14 22:30:05 +00:00
glebius
941de281ca Remove remnants of byte order manipulation, back when FreeBSD stack
stored packets in host byte order.
2019-02-09 03:00:00 +00:00
glebius
b0eb264052 Allow some nesting of ng_iface(4) interfaces and add a configuration knob.
PR:		235500
MFC after:	1 week
2019-02-08 06:19:28 +00:00
sobomax
53dba18a1b Allow ng_nat to be attached to a ethernet interface directly via ng_ether(4)
or the likes. Add new control message types: setdlt and getdlt to switch
from default DLT_RAW (no encapsulation) to DLT_EN10MB (ethernet).

Approved by:	glebius
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D18535
2018-12-17 16:00:35 +00:00
eugen
34b3653871 ng_source(4): correction after the change r340617
tv_usec has "long" type for all architecture in FreeBSD
and follows __LP64__. However, this is not true for tv_sec
that has "time_t" type.

Since r320347 that changed time_t from 32 to 64 bit integer
for 32 bit version of powerpc architecture, we have only single
i386 architecture having 32 bit time_t type.

Submitted by:	jhb
MFC after:	1 week.
2018-11-27 04:05:38 +00:00
eugen
fef1dcc92c Unbreak ng_source(4) for 64-bit platforms including amd64. 2018-11-19 07:27:50 +00:00
eugen
ebc457d1fa Make ng_pptpgre(8) netgraph node be able to restore order for packets
reordered in transit instead of dropping them altogether.
It uses sequence numbers of PPtPGRE packets.

A set of new sysctl(8) added to control this ability or disable it:

net.graph.pptpgre.reorder_max (1) defines maximum length of node's
private reorder queue used to keep data waiting for late packets.
Zero value disables reordering. Default value 1 allows the node to restore
the order for two packets swapped in transit. Greater values allow the node
to deliver packets being late after more packets in sequence
at cost of increased kernel memory usage.

net.graph.pptpgre.reorder_timeout (1) defines time value in miliseconds
used to wait for late packets. It may be useful to increase this
if reordering spot is distant.

MFC after:	1 month
2018-11-04 19:10:44 +00:00
markm
d8723e8b03 Remove the Yarrow PRNG algorithm option in accordance with due notice
given in random(4).

This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.

Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.

PR:		230870
Reviewed by:	cem
Approved by:	so(delphij,gtetlow)
Approved by:	re(marius)
Differential Revision:	https://reviews.freebsd.org/D16898
2018-08-26 12:51:46 +00:00
mav
fd2cf52733 Remove extra M_ZERO from NG_MKRESPONSE() argument.
NG_MKRESPONSE() sets M_ZERO by itself.

Submitted by:	Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after:	1 week
2018-08-20 14:35:54 +00:00
loos
81979a6755 The interface name must be sanitized before the search to match the existing
netgraph node.

Fixes the search (and use) of VLANs with dot notation.

Obtained from:	pfSense
Sponsored by:	Rubicon Communications, LLC (Netgate)
2018-08-15 13:42:22 +00:00
glebius
de3cf90753 Use if_tunnel_check_nesting() for ng_iface(4). 2018-08-03 22:55:58 +00:00
andrew
a6605d2938 Use the new VNET_DEFINE_STATIC macro when we are defining static VNET
variables.

Reviewed by:	bz
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D16147
2018-07-24 16:35:52 +00:00
jhb
ac1fdbf323 Catch up two more places to the V_ifnet change to a CK_STAILQ. 2018-05-24 00:06:55 +00:00
mmacy
7aeac9ef18 ifnet: Replace if_addr_lock rwlock with epoch + mutex
Run on LLNW canaries and tested by pho@

gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.

When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
4.98   0.00   4.42   0.00 4235592     33   83.80 4720653 2149771   1235 247.32
4.73   0.00   4.20   0.00 4025260     33   82.99 4724900 2139833   1204 247.32
4.72   0.00   4.20   0.00 4035252     33   82.14 4719162 2132023   1264 247.32
4.71   0.00   4.21   0.00 4073206     33   83.68 4744973 2123317   1347 247.32
4.72   0.00   4.21   0.00 4061118     33   80.82 4713615 2188091   1490 247.32
4.72   0.00   4.21   0.00 4051675     33   85.29 4727399 2109011   1205 247.32
4.73   0.00   4.21   0.00 4039056     33   84.65 4724735 2102603   1053 247.32

After the patch

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
5.43   0.00   4.20   0.00 3313143     33   84.96 5434214 1900162   2656 245.51
5.43   0.00   4.20   0.00 3308527     33   85.24 5439695 1809382   2521 245.51
5.42   0.00   4.19   0.00 3316778     33   87.54 5416028 1805835   2256 245.51
5.42   0.00   4.19   0.00 3317673     33   90.44 5426044 1763056   2332 245.51
5.42   0.00   4.19   0.00 3314839     33   88.11 5435732 1792218   2499 245.52
5.44   0.00   4.19   0.00 3293228     33   91.84 5426301 1668597   2121 245.52

Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch

Reviewed by:	gallatin
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
emaste
5122d84e64 Correct pseudo misspelling in sys/ comments
contrib code and #define in intel_ata.h unchanged.
2018-02-23 18:15:50 +00:00
eugen
fb2be7f6c8 ng_pppoe(8): add support for user-supplied Host-Uniq tag.
A few ISP filter PADI requests based on such tag,
to force the use of their own routers.
The custom Host-Uniq tag is passed in the NGM_PPPOE_CONNECT
control message, so it can be used with FreeBSD ppp(8)
and mpd without any other change.

Add support to send and receive PADM messages,
HURL and MOTM, often used by service providers to provide
ACS information and other configuration settings
to the user CPE.

Submitted by:	ale
Approved by:	mav (mentor)
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D9270
2018-02-14 21:17:44 +00:00
pfg
ced875130d Revert r327828, r327949, r327953, r328016-r328026, r328041:
Uses of mallocarray(9).

The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.

Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.

Reported by:	wosch
PR:		225197
2018-01-21 15:42:36 +00:00
pfg
d5d345aa9e netgraph: make some use of mallocarray(9).
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.

This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.

X-Differential revision: https://reviews.freebsd.org/D13837
2018-01-15 21:19:21 +00:00
pfg
78a6b08618 sys: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:23:17 +00:00
eugen
85321e8a2f Correction after r323873: #include <sys/lock.h> in addition to <sys/rmlock.h>
PR:		220076
Approved by:	mav (mentor)
MFC after:	3 days
2017-09-28 11:26:37 +00:00
eugen
74e3f7a235 Unprotected modification of ng_iface(4) private data leads to kernel panic.
Fix a race with per-node read-mostly lock and refcounting for a hook.

PR:			220076
Tested by:		peixoto.cassiano
Approved by:		avg (mentor), mav (mentor)
MFC after:		1 week
Relnotes:		yes
Differential Revision:	https://reviews.freebsd.org/D12435
2017-09-21 20:16:10 +00:00
glebius
32c3f17a23 Check return value from soaccept().
Coverity:	1376209
2017-06-14 16:13:20 +00:00
glebius
e35d543ec1 Listening sockets improvements.
o Separate fields of struct socket that belong to listening from
  fields that belong to normal dataflow, and unionize them.  This
  shrinks the structure a bit.
  - Take out selinfo's from the socket buffers into the socket. The
    first reason is to support braindamaged scenario when a socket is
    added to kevent(2) and then listen(2) is cast on it. The second
    reason is that there is future plan to make socket buffers pluggable,
    so that for a dataflow socket a socket buffer can be changed, and
    in this case we also want to keep same selinfos through the lifetime
    of a socket.
  - Remove struct struct so_accf. Since now listening stuff no longer
    affects struct socket size, just move its fields into listening part
    of the union.
  - Provide sol_upcall field and enforce that so_upcall_set() may be called
    only on a dataflow socket, which has buffers, and for listening sockets
    provide solisten_upcall_set().

o Remove ACCEPT_LOCK() global.
  - Add a mutex to socket, to be used instead of socket buffer lock to lock
    fields of struct socket that don't belong to a socket buffer.
  - Allow to acquire two socket locks, but the first one must belong to a
    listening socket.
  - Make soref()/sorele() to use atomic(9).  This allows in some situations
    to do soref() without owning socket lock.  There is place for improvement
    here, it is possible to make sorele() also to lock optionally.
  - Most protocols aren't touched by this change, except UNIX local sockets.
    See below for more information.

o Reduce copy-and-paste in kernel modules that accept connections from
  listening sockets: provide function solisten_dequeue(), and use it in
  the following modules: ctl(4), iscsi(4), ng_btsocket(4), ng_ksocket(4),
  infiniband, rpc.

o UNIX local sockets.
  - Removal of ACCEPT_LOCK() global uncovered several races in the UNIX
    local sockets.  Most races exist around spawning a new socket, when we
    are connecting to a local listening socket.  To cover them, we need to
    hold locks on both PCBs when spawning a third one.  This means holding
    them across sonewconn().  This creates a LOR between pcb locks and
    unp_list_lock.
  - To fix the new LOR, abandon the global unp_list_lock in favor of global
    unp_link_lock.  Indeed, separating these two locks didn't provide us any
    extra parralelism in the UNIX sockets.
  - Now call into uipc_attach() may happen with unp_link_lock hold if, we
    are accepting, or without unp_link_lock in case if we are just creating
    a socket.
  - Another problem in UNIX sockets is that uipc_close() basicly did nothing
    for a listening socket.  The vnode remained opened for connections.  This
    is fixed by removing vnode in uipc_close().  Maybe the right way would be
    to do it for all sockets (not only listening), simply move the vnode
    teardown from uipc_detach() to uipc_close()?

Sponsored by:		Netflix
Differential Revision:	https://reviews.freebsd.org/D9770
2017-06-08 21:30:34 +00:00
takawata
66577f8a50 Make cached Bluetooth LE host advertise information visible from userland.
Differential Revision:	https://reviews.freebsd.org/D10362
2017-04-27 15:03:24 +00:00
brooks
35c0325946 Remove the NATM framework including the en(4), fatm(4), hatm(4), and
patm(4) devices.

Maintaining an address family and framework has real costs when we make
infrastructure improvements.  In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).

With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.

Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021.  Improvements to the code in FreeBSD 11 are
certainly welcome.

Reviewed by:	philip
Approved by:	harti
2017-04-24 21:21:49 +00:00
pfg
c33a77a05d mppc - Finish pluging NETGRAPH_MPPC_COMPRESSION.
There were several places where reference to compression were left
unfinished. Furthermore, KASSERTs contained references to MPPC_INVALID
which is not defined in the tree and therefore were sure to break with
INVARIANTS: comment them out.

Reported by:	Eugene Grosbein
PR:		216265
MFC after:	3 days
2017-01-20 00:02:11 +00:00
julian
0a67be8d9d Changes to allow the patching of packets with an offset (and other changes.. see man page)
PR:	206185
Submitted by:	Dmitry Vagin <daemon-hammer@ya.ru>
MFC after:	 1 week
Relnotes:	yes (also ng_checksum node)
2016-12-02 10:47:10 +00:00
hselasky
4109d66dea Fix return value from ng_uncallout().
callout_stop() recently started returning -1 when the callout is already
stopped, which is not handled by the netgraph code. Properly filter
the return value. Netgraph callers only want to know if the callout
was cancelled and not draining or already stopped.

Discussed with:		julian, glebius
MFC after:		2 weeks
2016-12-02 09:29:22 +00:00
bz
3d1edadd15 Writing out the L2TP control packet requires 12 bytes of
contiguous memory but in one path we did not always guarantee this,
thus do a m_pullup() there.

PR:			214385
Submitted by:		Joe Jones (joeknockando googlemail.com)
MFC after:		3 days
2016-11-17 14:03:44 +00:00
bdrewery
30f99dbeef Fix improper use of "its".
Sponsored by:	Dell EMC Isilon
2016-11-08 23:59:41 +00:00
sbruno
7602bc08a8 Avoid panic from ng_uncallout when unpluggin ethernet cable with active
PPTP VPN connection.

Submitted by:	Michael Zhilin <mizhka@gmail.com>
Reviewed by:	ngie
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D7209
2016-08-08 19:31:01 +00:00
julian
38519f1995 netgraph module for reconstructing checksums
PR:		206108
Submitted by:	Dmitry Vagin  daemon.hammer@ya.ru
MFC after:	1 month
2016-08-01 12:09:04 +00:00
julian
bf1f50c6e8 slite style changes. There is an incoming patch that rewrites a
lot of this module and I want to get the style and whitespace changes in
a separate commit (or maybe more).

PR: 206185
Submitted by:	Dmitry Vagin
MFC after:	1 month
2016-08-01 11:34:12 +00:00
bz
7a1c0b1ad1 Get closer to a VIMAGE network stack teardown from top to bottom rather
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.

Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.

Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.

For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.

Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.

For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).

Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.

Approved by:		re (hrs)
Obtained from:		projects/vnet
Reviewed by:		gnn, jhb
Sponsored by:		The FreeBSD Foundation
MFC after:		2 weeks
Differential Revision:	https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
takawata
038b418853 Disconnect LE socket when the HCI connection associated is disconnected. 2016-06-07 16:57:13 +00:00
jkim
6aac4cff86 Fix style(9). 2016-05-26 19:17:51 +00:00
jkim
5cd86d07c0 Use bit_count(3) instead of four bitcount32() calls.
Reviewed by:	asomers, ngie
Differential Revision:	https://reviews.freebsd.org/D6543
2016-05-26 18:57:26 +00:00
pfg
79a1fafeb4 sys/netgraph: spelling fixes in comments.
No functional change.
2016-04-29 21:25:05 +00:00
pfg
fc01419148 sys: extend use of the howmany() macro when available.
We have a howmany() macro in the <sys/param.h> header that is
convenient to re-use as it makes things easier to read.
2016-04-26 15:38:17 +00:00
pfg
42747553f4 sys: use our nitems() macro when param.h is available.
This should cover all the remaining cases in the kernel.

Discussed in:	freebsd-current
2016-04-21 19:40:10 +00:00
pfg
fc65edc1cd Remove slightly used const values that can be replaced with nitems().
Suggested by:	jhb
2016-04-21 15:38:28 +00:00
pfg
12232f8463 sys/net* : for pointers replace 0 with NULL.
Mostly cosmetical, no functional change.

Found with devel/coccinelle.
2016-04-15 17:30:33 +00:00
pfg
b63211eed5 Cleanup unnecessary semicolons from the kernel.
Found with devel/coccinelle.
2016-04-10 23:07:00 +00:00
jhibbits
9da1c36d0a Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count.  Migrate these to use the new bus_alloc_resource_anywhere() API.

Reviewed by:	jhb
Differential Revision:	https://reviews.freebsd.org/D5370
2016-02-27 03:38:01 +00:00
glebius
306a6faf84 These files were getting sys/malloc.h and vm/uma.h with header pollution
via sys/mbuf.h
2016-02-01 17:41:21 +00:00