avoid downcasting issues. In particular, this change fixes
posix_memalign(3) for alignments greater than 2^31 on LP64 systems.
Make sure that NDEBUG is always set to be compatible with MALLOC_DEBUG. [1]
Reported by: [1] Lee Hyo geol <hyogeollee@gmail.com>
trees that track all non-full runs for each bin. Use the red-black
trees to be able to guarantee that each new allocation is placed in the
lowest address available in any non-full run. This change completes the
transition to allocating from low addresses in order to reduce the
retention of sparsely used chunks.
If the run in current use by a bin becomes empty, deallocate the run
rather than retaining it for later use. The previous behavior had the
tendency to spread empty runs across multiple chunks, thus preventing
the release of chunks that were completely unused.
Generalize base_chunk_alloc() (and rename it to base_pages_alloc()) to
handle allocation sizes larger than the chunk size, so that it is
possible to support chunk sizes that are smaller than an arena object.
Reduce the minimum chunk size from 64kB to 8kB.
Optimize tracking of addresses for deleted chunks.
Fix a statistics bug for huge allocations.
with `pw lock', so that it's impossible to log into a locked account
using an alternative authentication mechanism, such as an ssh key.
This change affects only accounts locked with pw(8), i.e., having a
`*LOCKED*' prefix in their password hash field, so people still can
use a different pattern to disable password authentication only.
Mention all account management criteria in the manpage.
Approved by: maintainer (timeout)
PR: bin/71147
MFC after: 1 month
- Correctly retrieve the initial (special) members of an archive after
an archive descriptor is rewound using elf_rand(SARMAG).
- Do not strip trailing white space from the 'raw' names retrieved
using elf_getarhdr().
Reported by: "Hyo geol, Lee" <hyogeollee at gmail dot com>
rounding and overflow. Carefully document what the various overflow
tests actually detect.
The bugs mostly canceled out, such that the worst possible failure
cases resulted in non-fatal over-allocations.
Don't change permissions on an existing dir unless _EXTRACT_PERM
is requested.
In particular, bsdtar -x should not edit mode of existing dirs
now; bsdtar -xp will.
than binary buddies, the alignment guarantees are weaker, which requires
a more complex aligned allocation algorithm, similar to that used for
alignment greater than the chunk size.
Reported by: matteo
chunks. This allows runs to be any multiple of the page size. The
primary advantage is that large objects are no longer constrained to be
2^n pages, which can dramatically decrease internal fragmentation for
large objects. This also allows the sizes for runs that back small
objects to be more finely tuned.
Free runs are searched for linearly using the chunk page map (with the
help of some heuristic optimizations). This changes the allocation
policy from "first best fit" to "first fit". A prototype red-black tree
implementation for tracking free runs that implemented "first best fit"
did not cause a measurable speed or memory usage difference for
realistic chunk sizes (though of course it is possible to construct
benchmarks that favor one allocation policy over another).
Refine the handling of fullness constraints for small runs to be more
tunable.
Restructure the per chunk page map to contain only two fields per entry,
rather than four. Also, increase each entry from 4 to 8 bytes, since it
allows for 32-bit integers, without increasing the number of chunk
header pages.
Relax the maximum chunk size constraint. This is of no practical
interest; it is merely fallout from the chunk page map restructuring.
Revamp statistics gathering and reporting to be faster, clearer and more
informative. Statistics gathering is fast enough now to have little
to no impact on application speed, but it still requires approximately
two extra pages of memory per arena (per process). This memory overhead
may be acceptable for most systems, but we still need to leave
statistics gathering disabled by default in RELENG branches.
Rename NO_MALLOC_EXTRAS to MALLOC_PRODUCTION in order to make its intent
clearer (i.e. it should be defined in RELENG branches).
avoid substantial potential bloat for static binaries that do not
otherwise use any printf(3)-family functions. [1]
Rearrange arena_run_t so that the region bitmask can be minimally sized
according to constraints related to each bin's size class. Previously,
the region bitmask was the same size for all run headers, which wasted
a measurable amount of memory.
Rather than making runs for small objects as large as possible, make
runs as small as possible such that header overhead stays below a
certain bound. There are two exceptions that override the header
overhead bound:
1) If the bound is impossible to honor, it is relaxed on a
per-size-class basis. Since there is one bit of header
overhead per object (plus a constant), it is impossible to
achieve a header overhead less than or equal to 1/(# of bits
per object). For the current setting of maximum 0.5% header
overhead, this relaxation comes into play for {2, 4, 8,
16}-byte objects, for which header overhead is (on 64-bit
systems) {7.1, 4.3, 2.2, 1.2}%, respectively.
2) There is still a cap on small run size, still set to 64kB.
This comes into play for {1024, 2048}-byte objects, for which
header overhead is {1.6, 3.1}%, respectively.
In practice, this reduces the run sizes, which makes worst case
low-water memory usage due to fragmentation less bad. It also reduces
worst case high-water run fragmentation due to non-full runs, but this
is only a constant improvement (most important to small short-lived
processes).
Reduce the default chunk size from 2MB to 1MB. Benchmarks indicate that
the external fragmentation reduction makes 1MB the new sweet spot (as
small as possible without adversely affecting performance).
Reported by: [1] kientzle
prefix) as an argument and mount point path. At the end it has to find
device name file system is stored on, which means when mount point path is
given, it tries to look into /etc/fstab and find special device
corresponding to the given mount point. This is not perfect, because it
doesn't handle the case when file system is mounted by hand and mount point
is given as an argument.
I found this problem while trying to use snapinfo(8), which passes mount
points to the ufs_disk_fillout(3) function, but I had file system mounted
manually, so snapinfo(8) was exiting with the error below:
ufs_disk_fillout: No such file or directory
I modified libufs(3) to handle those arguments (the order is important):
1. special device with /dev/ prefix
2. special device without /dev/ prefix
3. mount point listed in /etc/fstab, directory exists
4. mount point listed in /etc/fstab, directory doesn't exist
5. mount point of a file system mounted by hand
- moved away from ifn/ifa access to sctp_ifa/sctp_ifn
built and managed by the add-ip code.
- cleaned up add-ip code to use the iterator
- made iterator be a thread, which enables auto-asconf now.
- rewrote and cleaned up source address selection (also
made it use new structures).
- Fixed a couple of memory leaks.
- DACK now settable as to how many packets to delay as
well as time.
- connectx() to latest socket API, new associd arg.
- Fixed issue with revoking and loosing potential to
send when we inflate the flight size. We now inflate
the cwnd too and deflate it later when the revoked
chunk is sent or acked.
- Got rid of some temp debug code
- src addr selection moved to a common file (sctp_output.c)
- Support for simple VRF's (we have support for multi-vfr
via compile switch that is scrubbed from BSD but we won't
need multi-vrf until we first get VRF :-D)
- Rest of mib work for address information now done
- Limit number of addresses in INIT/INIT-ACK to
a #def (30).
Reviewed by: gnn
* Only try to remove the existing item if we're not restoring a directory.
* If unlink fails, try rmdir next.
This should fix the broken --unlink option in bsdtar.
Thanks again to: Kris Kennaway, for beating up bsdtar on pointyhat.
* The ACL formatter was mis-formatting entries which had a
user/group ID but no name. Make the parser tolerant of
these, so that old archives can be correctly restored;
fix the formatter to generate correct entries.
* Fix overwrite detection by introducing a new "FAILED" return
code that indicates the current entry cannot be continued
but the archive as a whole is still sound.
* Header cleanup: Remove some unused headers, add some that
are required with new Linux systems.
- first line is $FreeBSD$
- Reorder special variables: DPADD, LPADD, CFLAGS
- Use = instead of += for variables that are initially empty
- Use space instead of tab after :
- Use one tab after =
- Use .SUFFIXES for section 3 manual page which simplifies Makefile a lot
- Use SHAREDIR instead of /usr/share
- Remove SRCDIR in INCS since we set .PATH properly
- Use plural in variable name when it stands for more that one source file
Reviewed by: ru
Approved by: delphij (mentor)
These tests verify that archive_entry objects can store and return
ACL data and that pax format archives can read and write ACL
information. These do not (yet) test that ACL data is read or
written to disk correctly. (And hence would not have caught the
recent snafu about ACL read-from-disk being turned off.)
ACL data from the archive entry. This doesn't impact
archive_read_extract or archive_write_disk since they only
check for != ARCHIVE_OK when calling this function. (Though
they should be more careful.)
poll(2) or kqueue(2). Previously we rejected fd's higher than FD_SETSIZE
for kevent(2), and larger than sysconf(_SC_OPEN_MAX) for poll(2). However,
the check for poll(2) wasn't really needed. open(2) and socket(2) won't
return an fd you can't pass to either poll(2) or kevent(2). This fixes
a but where gethostbyname() would fail if you had more than 1023 files
open in a process.
MFC after: 1 week
Reviewed by: ume
Found by: ps
child thread goes back to system scope rather than process
scope. This allows an ensuing exec() to actually work.
This change was made a year ago here, but I "forgot" to
commit it :(
Approved by: deischen
MFC after: 3 weeks
Add IMPLEMENTATION NOTES section explaining in detail the effect this
system call has in common use cases involving PF_INET and PF_INET6 sockets.
PR: kern/84761
MFC after: 2 days
behind _FREEFALL_CONFIG). This is done mainly to make NIS even more
resistant to packet loss.
This is not enabled by default for "normal" FreeBSD since it might cause
the server providing the RPC service to be hit heavily with RPC traffic
in case of problems. freefall.FreeBSD.org and hub.FreeBSD.org have been
running with a patch similar to this for a couple of weeks.
MFC after: 1 week
Discussed with: peter
