nsayer
8ee4b8fcbe
Oops. Activate tap in man4 and modules makefiles
2000-07-20 20:29:03 +00:00
ache
364abbc47f
Describe newly implemented SGR 22,24,25,27
2000-07-20 18:50:12 +00:00
nsayer
14503a8247
Add the tap driver.
...
The tap driver is used to present a virtual Ethernet interface to the
system. Packets presented by the network stack to the interface are
made available to a character device in /dev. With tap and the bridge
code, you can make remote bridge configurations where both sides of
the bridge are separated by userland daemons.
This driver also has a special naming hack to allow it to serve a similar
purpose to the vmware port.
Submitted by: myevmenkin@att.com , vsilyaev@mindspring.com
2000-07-20 17:01:10 +00:00
mjacob
b7fd852ec4
Update isp man page, add ispfw man page.
2000-07-20 16:11:23 +00:00
sheldonh
2cef6835da
Add an MLINKS entry which makes snd(4) a link for pcm(4).
...
Suggested by: Udo Erdelhoff <ue@nathan.ruhr.de>
2000-07-20 15:47:45 +00:00
sheldonh
2bbfbcee9b
Add a FILES section which, as a side-effect, just so happens to
...
give device node creation instructions.
PR: 20060
Reported by: "Sean O'Connell" <sto@stat.Duke.EDU>
2000-07-20 14:19:17 +00:00
sheldonh
20d503002f
Fix a typo and mark ``update'' up consistently in the HISTORY section.
...
Reported by: des
2000-07-20 13:05:41 +00:00
sheldonh
a749dd3647
Clear the extraneous Os argument, which survived rev 1.3.
2000-07-20 11:46:51 +00:00
sheldonh
3f3bfa3efb
General clean-up [1/1]: whitespace
2000-07-20 11:45:56 +00:00
sheldonh
4f3a6e9659
General clean-up [0/1]: content
...
Clear extraneous Nm arguments.
Clarify some English.
Mark netgraph and ifconfig up as a cross-reference.
Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
sheldonh
c95a6d8116
Include a comment explaining the usual delay between writes and syncs.
2000-07-20 07:31:52 +00:00
n_hibma
471997687f
Typo.
...
Submitted by: Mike Meyer <mwm@mired.org>
2000-07-19 23:07:42 +00:00
ben
8dc09f7b51
Document the rc.d system.
...
Suggested by: dcs
Reviewed by: alex, dcs, sheldonh
2000-07-19 19:08:08 +00:00
jasone
531e62c825
pthread_once --> pthread_once_t.
2000-07-19 16:38:07 +00:00
sheldonh
01a450a566
Remove mention of SYNCER_MAXDELAY and "thirty seconds", using more
...
general terms instead. This follows a discussion with alfred,
in which it became clear that I had misunderstood sched_sync().
2000-07-19 11:47:16 +00:00
sheldonh
672d736d95
Replace the obsolete update(4) manual page with syncer(4). I was
...
not abble to solicit review from <freebsd-hackers>.
2000-07-19 07:15:32 +00:00
sheldonh
985f997674
Clean up this new manual page. This delta includes content and
...
whitespace changes, which should not be a problem because this
is only the second revision of the file and translators are
unlikely to have gotten started yet.
Reviewed by: abial
2000-07-19 06:33:34 +00:00
ben
112e4eb0d5
Define what is meant by brackets' and
braces'.
...
Suggested by: grog
2000-07-18 14:41:01 +00:00
sheldonh
dcbe29acc9
Order the cross-references in the SEE ALSO section correctly.
2000-07-18 13:03:09 +00:00
sheldonh
d383350bcb
Clean up this new manual page. This delta includes content and
...
whitespace changes, which should not be a problem because this
is only the second revision of the file and translators are
unlikely to have gotten started yet.
Reviewed by: abial
2000-07-18 07:46:14 +00:00
jasone
3006cee4d8
Change my email address in the copyright notices for the sake of consistency
...
(jasone@canonware.com --> jasone@freebsd.org ).
2000-07-18 01:38:19 +00:00
wpaul
d6d5b813b3
Add the PCI IDs for the Macronix 98727 and 98732 parts. These are
...
3.3volt PCI/cardbus chipsets similar to the 98715 (and they have
512-bit hash tables). Also update the man page to mention the 98727/98732
and the SOHOware SFA110A Rev B4 card with the 98715AEC-C chip.
2000-07-17 19:27:41 +00:00
ben
9a9e278fc0
Remove some whitespace so the line with "brackets" changed to "angle
...
brackets" no longer touches the right edge of an 80 column display.
2000-07-17 19:05:57 +00:00
wpaul
d5347042f6
kue(4) and cue(4) do not need miibus.
2000-07-17 19:04:58 +00:00
sheldonh
263ffe32d1
Rename MDNSECT to MD_NSECT and declare it as something that isn't
...
default in NOTES.
Requested by: bde
Approved by: phk
2000-07-17 13:13:04 +00:00
itojun
61ae82c8a8
sync with latest kame doc. wording changes and updates
2000-07-17 02:37:26 +00:00
itojun
fc84997194
bring in latest kame doc. talk about ah tunnel caveat.
2000-07-17 02:22:18 +00:00
ben
c1b4384a1c
1. "braces" -> "brackets" when referring to [ and ].
...
PR: 19894
Submitted by: Tony Finch <dot@dotat.at>
2. "brackets" -> "angle brackets" when referring to < and >.
3. Clean up the bit about creating the usage() message. After clarifying a
couple of points the sentence became rather long, and rather poor English, so
it was converted to a enumerated list instead.
parts 1, 2, 3:
Reviewed by: sheldonh
2000-07-16 20:46:43 +00:00
ben
022f7e0a57
"VFS entry point" -> "entry point", to be consistent with other VOP_*(9)
...
manual pages.
PR: 18593
Submitted by: Anatoly Vorobey <mellon@pobox.com>
2000-07-15 22:28:16 +00:00
abial
c7bf2569fa
These patches implement dynamic sysctls. It's possible now to add
...
and remove sysctl oids at will during runtime - they don't rely on
linker sets. Also, the node oids can be referenced by more than
one kernel user, which means that it's possible to create partially
overlapping trees.
Add sysctl contexts to help programmers manage multiple dynamic
oids in convenient way.
Please see the manpages for detailed discussion, and example module
for typical use.
This work is based on ideas and code snippets coming from many
people, among them: Arun Sharma, Jonathan Lemon, Doug Rabson,
Brian Feldman, Kelly Yancey, Poul-Henning Kamp and others. I'd like
to specially thank Brian Feldman for detailed review and style
fixes.
PR: kern/16928
Reviewed by: dfr, green, phk
2000-07-15 10:26:04 +00:00
sheldonh
62dee1d507
Actually allow ``options MDNSECT=<numsects>'' in kernel configs to
...
specify the default maximum size of malloc(9)-backed md(4) devices
and complete the documentation of this option.
2000-07-14 12:14:13 +00:00
obrien
ef18034ac1
Revert rev 1.24.
...
Facts verfied by: mckusick
2000-07-13 22:40:50 +00:00
mckay
0a01ca3918
Spelling.
2000-07-13 13:49:36 +00:00
nbm
e16a57d0c9
Update the st(4) and sd(4) references to sa(4) and da(4) respectively,
...
maintaining order, were the references ordered already.
PR: reminded by 19647
Submitted by: reminded by Jens Schweikhardt <schweik@noc.dfn.de>
2000-07-12 15:19:39 +00:00
dannyboy
aa58ce170e
Add some missing articles (as in a, an, the).
2000-07-11 22:39:48 +00:00
asmodai
32102c76d1
Install accept_filter.9
...
Forgotten by: alfred
2000-07-11 13:50:04 +00:00
alfred
d2437a5b06
attrib properly.
...
Pointed out by: asmodai
2000-07-10 19:20:08 +00:00
alfred
adaba3e9da
Document the kernel interface for accept filters.
...
Thanks to sheldonh for cleaning up the rough initial manpage.
2000-07-10 17:23:53 +00:00
roberto
bc93600740
Correct one reference to wd.4 by ad.4.
2000-07-10 08:01:38 +00:00
sheldonh
aa8afafd98
Add md.4 to the build.
2000-07-07 11:57:02 +00:00
sheldonh
d3d5fc1a48
Add phk's md(4) manual page, written by phk himself.
2000-07-07 11:52:03 +00:00
wpaul
0dca3ea5d5
Fix up the sis.4 man page per Sheldon Hearn:
...
* Clear the Os macro, which is assumed gracefully at run-off time.
* Use quotes to reduce the long name description (Nd) to a single
argument.
* Use meaningful arguments to the -width option of the Bl macro.
* Mark rc.conf up with Xr instead of Pa so that it is obvious that
further help on that file is available.
* Explicitly indicate that mediaopt is a command modifier (Cm) of
the ifconfig(8) utility.
* Do not mark up half-duplex and full-duplex as arguments (Ar),
since they are allowed values for an argument.
* Fix various grammar and spelling mistakes.
2000-07-06 19:30:20 +00:00
wpaul
966a32cd5b
Add support for the National Semiconductor DP83815 fast ethernet
...
controller chip. This chip is currently being used on the NetGear
FA312-TX adapter, which I guess is a replacement for the FA310-TX
(PNIC-based).
I added support for this chip by modifying the sis driver since
the SiS 900 and the NS DP83815 have almost the same programming
interface (the RX filter programming and PHY access methods are
different, but the general configuration, DMA scheme and register
layout are identical).
I would have had this done a lot sooner, but getting the damn MAC
address out of the EEPROM proved to be more complicated than expected.
2000-07-06 06:02:04 +00:00
sheldonh
b896bc0c05
Introduce a new option, daily_status_disks_df_flags, which specifies
...
the command-line arguments to be used for the call to df(1) when
daily_status_disks_enable is set to YES.
The name of the new variable was chosen by the maintainer of our
periodic hierarchy, Brian Somers.
PR: 19631
2000-07-05 10:47:01 +00:00
itojun
1497eb98fb
sync with kame. more security warnings
2000-07-05 08:15:05 +00:00
itojun
5ac382435e
sync with reality/latest kame
2000-07-04 16:39:23 +00:00
roberto
bdc1688523
- link ata.4 to {acd,ad,afd,ast}.4
...
- add the reference to ad.4 in da.4.
MFC candidate.
Submitted by: sheldonh, mpp
2000-07-04 16:32:46 +00:00
n_hibma
68d8eaff96
Correct the text for the return value.
...
Submitted by: phk
2000-07-04 12:45:56 +00:00
roberto
775730e0ac
Insert a reference to ata.4.
...
Discussed with: phk
2000-07-04 10:01:12 +00:00
roberto
38263b378f
Oops, there's no ad.4.
2000-07-04 09:37:06 +00:00
roberto
3d951bdf74
Replace a reference to wd(4) to ad(4).
...
Found by: phk
2000-07-04 09:32:11 +00:00
sheldonh
003a1ce32a
Clear the obsolete argument to the Os macro.
...
Clear extraneous arguments to Nm.
Use Pa to mark up paths.
Use a single tagged list in the FILES section.
2000-07-03 12:56:00 +00:00
asmodai
0f33a49366
Fix up typo.
...
Add description of sshd_program variable.
Submitted by: Ashley Penney <ashp@unloved.org>,
Adrian Chadd <adrian@freebsd.org>
2000-07-03 12:34:27 +00:00
wollman
4667587f8c
Use consistent markup for literals and quoted metasyntactic variables.
...
Left unfixed: `NIS' should be marked up as a tradename.
2000-06-30 15:59:48 +00:00
wollman
cd8275447d
Spell `99%' correctly.
2000-06-30 15:28:06 +00:00
wollman
5bfa04f958
Fix spelling of `whose'.
2000-06-30 15:22:18 +00:00
sheldonh
18bd9c21cd
Do not link bktr.4 and bt.4 into ../, since these are no longer
...
installed from man4.i386.
PR: 19601
Submitted by: Ben Smithurst <ben@scientia.demon.co.uk>
2000-06-30 11:50:46 +00:00
sheldonh
010f29f28c
Use "yesterday's" instead of "yesterdays" as required for correct
...
grammar.
Since this pushes the line to an unacceptable length, apply the
accepted line breaking style.
2000-06-30 11:24:31 +00:00
brian
b75660d8b2
De-spam (oops!)
...
Spotted by: sheldonh
2000-06-30 11:18:19 +00:00
brian
d220ee616b
Add $daily_status_mail_rejects_logs, defaulting to 3 to control
...
how many /var/log/maillog* files to check
PR: 19587
2000-06-30 09:41:16 +00:00
brian
1a9ea82414
Reword the description of weekly_status_pkg_enable (although not
...
quite how Sheldon suggested)
Suggested by: sheldonh
2000-06-27 12:04:43 +00:00
brian
1400b2309b
Add weekly_status_pkg_enable (defaults to NO)
2000-06-27 11:20:08 +00:00
brian
4f3352b86c
Mention $daily_accounting_compress
...
Forgotten by: Ben & I
2000-06-27 10:52:21 +00:00
archie
2c5a7a6ad0
Update to reflect new ng_ether(4) hooks.
...
Remove 'options NETGRAPH' requirement.
2000-06-27 00:09:49 +00:00
sheldonh
9932b959ce
The rand_irqs variable was removed in rev 1.67 of rc.conf. Remove it
...
from the documentation also.
2000-06-26 08:29:47 +00:00
mpp
bd6ff3da97
Remove some mis-leading text from the "Libraries" section.
2000-06-24 23:02:01 +00:00
brian
567e3fdcca
Introduce /etc/defaults/periodic.conf, similar in concept to rc.conf.
...
The only change in the default functionality should be that
the output reports are slightly more verbose WRT files deleted.
Not objected to by: freebsd-arch
2000-06-23 01:18:31 +00:00
sheldonh
1dcfda0565
Use sub-sections (Ss) to categorize diagnostics and rationalize
...
diagnostic lists (Bl -diag) so that there is one per section.
Since this change creates a large delta, enforce line-breaking
style while I'm here.
These changes have blanket approval from (but were not reviewed
by) the author.
2000-06-22 08:32:54 +00:00
alex
de6b3245ff
mdoc style cleanup: newline for new sentence.
...
Submitted by: sheldonh
2000-06-20 15:05:06 +00:00
alex
b26d37235f
rc.local is no longer a default.
...
PR: 19314
Submitted by: Ben Smithurst <ben@scientia.demon.co.uk>
2000-06-20 10:30:50 +00:00
alex
b106d44e88
Fix typo (accessable --> accessible) and add period.
...
PR: 18588
Submitted by: Anatoly Vorobey <mellon@pobox.com>
Reviewed by: asmodai
2000-06-14 17:53:11 +00:00
jake
5b7ef4dfa5
Add MLINKS for queue(3) FOREACH_REVERSE and HEAD_INITIALIZER macros.
...
Forgotten by: jake, archie
2000-06-12 15:28:08 +00:00
alex
4b768a4a2f
Document possible values for the waitfor arg.
...
PR: 18627, 18628
Reviewed by: asmodai
2000-06-12 13:53:04 +00:00
jake
dd687fadf8
(1) document *_HEAD_INITIALIZER
...
(2) fix a STAILQ_HEAD that should have been STAILQ_FIRST
Requested by: (1) bde
(2) W Gerald Hicks <jhix@mindspring.com>
2000-06-10 16:41:07 +00:00
asmodai
eff86e03a9
Fix alphabetical ordering of supported ATA-chipsets.
2000-06-10 13:38:40 +00:00
alex
9207d01f3d
Remove XXX: Describe if_init().
...
Reviewed by: asmodai
2000-06-10 10:23:06 +00:00
jhb
e34188e1fc
Document flags 0x100 in syscons.4, and document syscons' flags in LINT.
...
Reviewed by: yokota, obrien
2000-06-09 23:47:30 +00:00
brian
940cc2dc44
Document $clear_daily_*
2000-06-09 17:07:59 +00:00
alex
5a7e3bbf00
Add bus_alloc_resource.9 and bus_release_resource.9.
...
bus_release_resource.9 contains a paragraph obtained from a mail
by Warner Losh <imp@FreeBSD.org> to myself.
Reviewed by: asmodai, hoek; in parts by msmith, mdodd and imp
2000-06-08 21:00:12 +00:00
asmodai
7867eeffd4
Remove \n I overlooked in a previous commit.
...
PR: 19111
Submitted by: R. Matthew Emerson <rme@nightfly.apk.net>
2000-06-08 13:29:41 +00:00
ru
7e5624f6ce
Document /usr/lib/aout.
...
PR: conf/18167
2000-06-07 07:41:09 +00:00
ache
f2c52a3829
Wording: reset to normal ANSI value -> reset to the normal color
2000-06-06 06:14:37 +00:00
ache
7d22f1b9d1
ANSI attribute -> video attribute, was confused by wrong syscons comment
2000-06-06 00:19:51 +00:00
ache
d9db3b3863
initial -> normal (since this term used in syscons too)
...
Explicitly mark ANSI colors from non-ANSI
2000-06-06 00:03:38 +00:00
ache
cda81cb1a9
Properly mark all sequences which set initial colors.
...
Clean color tables.
2000-06-05 23:50:00 +00:00
ache
016e949aa3
Specify parameters ranges for E[...x
2000-06-05 23:24:37 +00:00
ache
2a6bfc59ca
Document E[39m and E[49m
...
Describe whole E[...x set
2000-06-05 23:01:58 +00:00
ru
96199a91ad
/usr/mdec has gone 1.5 years ago.
2000-06-05 16:14:51 +00:00
asmodai
4dc1a14f85
VFS_CHECKEXP.9:
...
Fix typo.
Fix description.
VFS_FHTOVP.9:
Fix order in which the manpage says the calls should be made.
PR: 18590
Submitted by: Anatoly Vorobey <mellon@pobox.com>
2000-06-04 15:31:12 +00:00
groudier
0840690171
Submitted by: Sheldon Hearn
...
Miscellaneous fixes.
2000-06-04 14:58:40 +00:00
sheldonh
fb69e71986
Document the NewReno sysctl knob.
...
Submitted by: jlemon
2000-06-02 13:12:36 +00:00
chris
3a3f64f949
Replace `manual(section)' references with proper .Xr statements.
2000-05-31 21:33:15 +00:00
obrien
48a0d1fc6c
Fix long lines.
2000-05-28 17:18:14 +00:00
dfr
75f437d061
Add documentation for taskqueue apis.
2000-05-28 16:53:50 +00:00
groudier
93273a1f23
Reviewed by: David O'Brien
...
Document driver support for:
- Early NCR53C810/815/825 chips.
- Newer chip architectural improvements (Hardware phase
mismatch and LOAD/STORE instructions).
2000-05-28 12:59:18 +00:00
obrien
c0f2f68d1f
Move adv.4, adw.4, aha.4, ahb.4, bktr.4, bt.4, dpt.4, ed.4, joy.4, ppc.4,
...
sym.4, and wi.4 to the MI area.
2000-05-28 03:27:49 +00:00
chris
ef06afc4d3
Fix a misspelling: undefied -> undefined
2000-05-27 22:02:32 +00:00
msmith
f37743b82d
Manpage for the 'twe' driver.
2000-05-24 23:48:15 +00:00
hoek
e6e653134b
The LOCKPARENT flag is singular. It doesn't work causing complications
...
is also a singular fact.
2000-05-21 03:23:10 +00:00
hoek
d5d9f7eb9e
No be needed here --- "typo".
2000-05-21 03:16:35 +00:00
hoek
54601029d6
Typos, missing words. I don't believe any of these are relevant to
...
translators.
2000-05-21 03:06:28 +00:00
mpp
3aead3a20f
Update the man page to match utmp.h.
2000-05-19 18:24:23 +00:00
chris
cb7732df18
Replace a manual.section file reference with a proper mdoc(7) .Xr
...
reference.
PR: 18625
Submitted by: Alexander Langer <alex@cichlids.com>
2000-05-18 00:20:55 +00:00
paul
c179fa5070
Correct duplicate use of word "been" in a sentence.
2000-05-12 15:31:54 +00:00
phantom
f3a1d31938
Fix typo
...
Spoted by: bde
2000-05-12 10:50:04 +00:00
phantom
933595a496
. insert forgotten by someone "Space Mode on" directive. It caused displaying
...
of all macros placed after FILES section w/o any space characters.
. slightly correct usage of .An macros.
2000-05-12 09:10:40 +00:00
phantom
14616a0a5c
Place $FreeBSD$ tag to correct location (bottom of the copyright)
2000-05-12 08:37:08 +00:00
phantom
a380851e9e
Fix driver source location path (/sys/i386/isa/fd.c -> /sys/isa/fd.c)
2000-05-12 08:36:36 +00:00
phantom
ed30cb11a7
Use .An macro for declare Authors Name in AUTHORS section
2000-05-12 08:32:56 +00:00
phantom
5c85b197fc
Add MLINKS: scsi.4 -> SCSI.4, scsi.4 -> CAM.4
2000-05-12 08:32:09 +00:00
phantom
dfc1583802
. replace CONFIGURATION section name with SYNOPSYS as mdoc(7) style declare.
...
. remove redundant paragraph breaks.
. fix typo (.Sj -> .Sh)
2000-05-12 08:30:58 +00:00
phantom
1edae0ae5e
Properly mdoc'ify this manual page: remove all direct troff formating
...
directives, apply correct mdoc(7) Blocks and Lists formatting.
2000-05-12 08:28:01 +00:00
phantom
b963d2798f
Add MLINKS: bktr.4 -> booktree.4
2000-05-12 08:14:11 +00:00
phantom
079ff4176c
Remove osolete reference to eg(4), properly use mdoc macro `.Nm'
2000-05-12 08:10:22 +00:00
phantom
b1bd5e2cc7
Add MLINKS for all macros decribed in queue.3 manpage.
2000-05-12 07:58:37 +00:00
chris
8fd137c6b5
Document the `new' fdesc--now that it belongs only on /dev/fd, remove all
...
non-/dev/fd related documentation (such as that for stdin, stdout, tty).
Update the fstab line to refer to /dev/fd instead of /dev.
2000-05-11 22:20:23 +00:00
bde
85a17b7337
Abuse .Fn for macros better (don't hand-format the parameter string by
...
quoting it all and adding commas).
Don't say that the expression in KASSERT() is an int. It is a collection
of tokens forming a C expression that can be compared with 0.
2000-05-11 16:54:52 +00:00
bde
7f64770f56
Removed bogus quoting of single tokens in a .Fn invocation. This helps
...
my synopsis checker decide which .Fn's are for prototypes (most function
parameters require quoting because they have multiple tokens).
2000-05-11 16:39:33 +00:00
bde
98c05ce837
Fixed bitrot. The changes from buf to bio had not reached here.
2000-05-11 16:25:03 +00:00
bde
0cc0bf41fa
Abuse .Ft and .Fn for macros in the usual way (name the macro parameters,
...
and don't use .It for the macro pseudo-return type).
2000-05-11 16:22:38 +00:00
bde
eae1aa7098
"Fixed" missing include in synopsis. POSIX.1-1996 only specifies
...
including <signal.h>, but that must be a bug in POSIX.1, because it
also specifies that the relevant prototype is [only] in <pthread.h>.
2000-05-11 16:13:18 +00:00
bde
5e51fa49c7
Fixed misspelling of a struct tag in a function parameter type.
2000-05-11 16:03:38 +00:00
darrenr
cd382f0186
patch from Alexey Zelkin
2000-05-11 00:44:35 +00:00
asmodai
b1c5277216
Add more substance to the amr.4 manpage.
...
Submitted by: msmith
2000-05-10 18:45:20 +00:00
archie
e52673c66d
Update man page to reflect new IPv6 hook. Simplify Makefile.
2000-05-10 16:54:40 +00:00
darrenr
5419f3d595
Add pfil(9) subroutines and manpage from NetBSD.
2000-05-10 13:37:51 +00:00
sheldonh
5443174128
Supply only one author name per instance of %A, as per mdoc.samples(7).
...
PR: 18465
Submitted by: Kazu TAKAMUNE <takamune@avrl.mei.co.jp>
2000-05-10 09:49:04 +00:00
hoek
5a7313cf7d
Small grammar gnit.
2000-05-09 20:35:13 +00:00
mpp
078cc10d67
Spelling fix: despatching -> dispatching. This makes the
...
spelling consistent throughout the man page.
PR: docs/18467
Submitted by: Alexander N. Kabaev <ak03@gte.com>
2000-05-09 18:52:26 +00:00
mpp
ea451418d4
Correct a patch name and use the correct macro for displaying it.
...
PR: docs/18468
Submitted by: Anatoly Vorobey <mellon@pobox.com>
2000-05-09 18:44:34 +00:00
mph
792296e530
Correct "it's" to "its".
...
PR: 18469
Submitted by: Anatoly Vorobey <mellon@pobox.com>
2000-05-09 18:08:52 +00:00
sheldonh
8226df019a
Update the builtin(1) manpage to reflect changes since the csh(1)
...
to tcsh(1) upgrade. The following commands were added as builtins:
bindkey
builtins
complete
echotc
filetest
hup
log
ls-F
printenv
sched
settc
setty
telltc
uncomplete
where
The printf builtin was removed.
2000-05-09 14:59:06 +00:00
sheldonh
14e9cd73ea
Fix miscellaneous mdoc macro argument limit infringements.
...
PR: 18465
Reported by: Kazu TAKAMUNE <takamune@avrl.mei.co.jp>
2000-05-09 14:02:06 +00:00
sheldonh
e2d76028f0
Fix nits in previous commit: hard sentence break and grammar.
2000-05-09 08:09:31 +00:00
hoek
f4fed92e9a
.Xr vgl 3 ,
...
PR: kern/14566
2000-05-09 02:52:39 +00:00
ache
65a96410db
Describe firewall_logging option
2000-05-08 21:10:33 +00:00
sheldonh
5aae6a9c86
Remove the MLINKS entry for cwd, since it's no longer listed in the
...
builtin.1 page.
2000-05-08 16:23:56 +00:00
sheldonh
e866411f10
Remove the bogusly inserted ``cwd'' which isn't a builtin command
...
to sh, csh nor tcsh.
Fix the header line of the table to use cross-references and
emphasis.
2000-05-08 15:59:23 +00:00
msmith
483d6a0715
For tape devices, 'r' means REWIND, not RAW.
2000-05-07 21:47:07 +00:00
archie
fc024e2d6f
AUTHOR -> AUTHORS
2000-05-05 17:08:55 +00:00
archie
e696412047
Document the new statistics control messages.
...
Add a note about the IP header asymmetry on the "lower" hook.
2000-05-05 01:20:28 +00:00
phantom
c7b17c64fe
Add libipsec to the list of available libraries
2000-05-04 17:58:22 +00:00
archie
44be3a44bd
Move netgraph node type man pages from section 8 to section 4.
2000-05-04 17:54:37 +00:00
archie
fc8fd5b5fc
Move netgraph node type man pages from section 8 to section 4.
2000-05-04 17:40:13 +00:00
sheldonh
aa21dff898
Remove hard sentence breaks introduced in rev 1.9.
2000-05-04 17:30:46 +00:00
phantom
cbeef441ea
Document .Fx',
.Nx' and `.Ox' macros as callable and parsable.
2000-05-04 16:25:27 +00:00
phantom
a477158490
mdoc(7) cleanup:
...
. use real function names as `.Nm' macro argument in NAME section. It allows
them to appear in apropos(1) or whatis(1) output.
. replace empty lines with `.Pp' macro.
. replace hardcoded standard names with their `.St' macro equivalents.
. sort cross references in SEE ALSO section
2000-05-04 08:05:45 +00:00
archie
c7cde3fa56
Formatting tweak.
...
PR: docs/18292
2000-05-03 16:46:10 +00:00
jasone
2ba660079d
Add missing .El macro.
2000-05-03 08:50:43 +00:00
n_hibma
7723d4f854
Update my e-mail address
2000-05-02 11:58:47 +00:00
jasone
03d029f134
Add missing man pages. Fix various compliance bugs, mostly having to do with
...
error return values. Implement pthread_mutexattr_gettype().
PR: docs/16537, docs/17538
2000-05-02 06:51:40 +00:00
n_hibma
b2d827cc6b
Include udbp.4 in the build
2000-05-01 22:58:18 +00:00
n_hibma
53d90f6dfb
The USB double bulk pipe driver (Host to host cables). Currently there
...
are two supported chips, the NetChip 1080 (only prototypes available)
and the EzLink cable. Any other cable should be supported however as they
are all very much alike (there is a difference between them wrt
performance).
It uses Netgraph.
This driver was mostly written by Doug Ambrisko and Julian Elischer and
I would like to thank Whistle for yet another contribution. And my
aplogies to them for me sitting on the driver for so long (2 months).
Also, many thanks to Reid Augustin from NetChip for providing me with a
prototype of their 1080 chip.
Be aware of the fact that this driver is very immature and has only been
tested very lightly. If someone feels like learning about Netgraph however
this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
n_hibma
cfa1c7669d
Remove some trailing zeroes.
2000-05-01 22:09:15 +00:00
archie
c0981040e1
Document TAILQ_FOREACH_REVERSE() and CIRCLEQ_FOREACH_REVERSE() macros.
...
Submitted by: Jake Burkholder <jburkhol@home.com>
2000-05-01 18:22:59 +00:00
phantom
d21884772b
Make kame.4 manpage more FreeBSD specific. Replace some KAME kit directory and
...
file names with its FreeBSD equivalents.
Remove references to some debuging tools which would never appear in FreeBSD.
Use mdoc(7) macros in proper places.
Give a credit to Youshinobu Inoue for his efforts on KAME kit integration to
the FreeBSD main source tree.
2000-05-01 14:09:23 +00:00
julian
8b471affb9
Update the man page to reflect the recent changes to the kernel API for
...
netgraph.
2000-04-30 10:01:11 +00:00
des
360b4bf367
Fix language in description of firewall_script.
...
Submitted by: sheldonh
2000-04-27 10:41:53 +00:00
des
eded8d6b39
Document firewall_script
2000-04-27 09:10:53 +00:00
bsd
a5a543c27b
Back out the hook to execute the file ${firewall_type}. The intended
...
purpose of the hook was to provide the ability for a shell program to
instantiate the firewall rules instead of forcing them to be
statically coded. This functionality was already present through the
use of ${firewall_script}, and I see no need to keep the
${firewall_type} hook around.
Reminded by: Dag-Erling Smorgrav <des@freebsd.org>
2000-04-27 00:48:59 +00:00
obrien
76a887370c
"r" (raw) devices aren't named the traditional way any longer.
2000-04-26 12:54:51 +00:00
wollman
5b41d2de63
Add punctuation to make a sentence more readable.
2000-04-25 16:40:57 +00:00
wpaul
4aaedabaa2
Add "device miibus" to SYNOPSIS section.
2000-04-24 02:01:56 +00:00
phantom
f585d93a0a
Add expanded information about .Lb macro
2000-04-23 14:50:38 +00:00
phantom
40d2f93ad8
Add information about newly added .Lb macro
2000-04-23 14:49:22 +00:00
chris
3359538d52
Update the `file' entry to reflect its nature as a symbolic link.
2000-04-22 18:19:54 +00:00
phantom
c8cd1c858c
Introduce .Lb macro to libc_r manpages.
2000-04-22 15:50:29 +00:00
wpaul
e9122c3369
Update to include info about the 1000baseTX adapters.
2000-04-22 02:17:44 +00:00
green
9738fe7145
Poul-Henning's changes necessitate s/bp->b_flags/bp->b_io/bio_cmd/.
2000-04-21 01:19:53 +00:00
green
9299befccf
s/of possible/if possible/
2000-04-21 01:14:33 +00:00
chris
4d657494f0
Add a .Pp between the forklist_fn typedef and the at_fork prototype.
2000-04-19 02:43:04 +00:00
chris
156a0f183a
Replace a literal vertical space with a .Pp macro.
2000-04-19 02:42:11 +00:00
chris
d985994730
Fill in a missing word (`it').
2000-04-19 02:32:41 +00:00
bsd
0704827a96
Update the man page regarding the behaviour for the ${firewall_type}
...
variable.
Reminded by: Ruslan Ermilov <ru@FreeBSD.org>
2000-04-17 12:48:29 +00:00
msmith
65df8843ed
Flesh this manpage out; add a more complete list of supported controllers
...
and add a list of controller diagnostic messages.
2000-04-11 02:53:45 +00:00
dfr
8031b933e7
Use the existing Fx macros for rendering "FreeBSD ver".
...
Submitted by: Sheldon Hearn <sheldonh@uunet.co.za>
2000-04-10 08:21:16 +00:00
archie
14c7590727
Add ng_mppc(8) netgraph node as a KLD module.
...
Obtained from: Whistle source tree
2000-04-09 21:07:39 +00:00
dfr
2d18287eb4
Add manpage for kernel object system.
2000-04-08 13:24:40 +00:00
bp
aed3eeb310
Uncomment ETHER_II frame and remove BPF related variable.
2000-04-06 03:09:56 +00:00
imp
4b312a286f
Awi driver, ported from NetBSD from Atsushi Once-san.
...
From the README:
Any IEEE 802.11 cards use AMD Am79C930 and Harris (Intersil) Chipset
with PCnetMobile firmware by AMD.
BayStack 650 1Mbps Frequency Hopping PCCARD adapter
BayStack 660 2Mbps Direct Sequence PCCARD adapter
Icom SL-200 2Mbps Direct Sequence PCCARD adapter
Melco WLI-PCM 2Mbps Direct Sequence PCCARD adapter
NEL SSMagic 2Mbps Direct Sequence PCCARD adapter
Netwave AirSurfer Plus
1Mbps Frequency Hopping PCCARD adapter
Netwave AirSurfer Pro
2Mbps Direct Sequence PCCARD adapter
Known Problems:
WEP is not supported.
Does not create IBSS itself.
Cannot configure the following on FreeBSD:
selection of infrastructure/adhoc mode
ESSID
...
Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>
2000-04-06 02:48:48 +00:00
sheldonh
9e6ba208ab
Whitespace change:
...
Remove single-space hard sentence break introduced in the previous
commit.
Reviewed by: jmb
2000-04-04 15:32:37 +00:00
sheldonh
4ae4d58ad1
Explain static numbering.
...
Reviewed by: asmodai
2000-04-03 13:07:33 +00:00
yokota
10ee03476d
Brush up the last commit.
...
- Change some expressions.
- Wrap "resume" in single quotes to maintain consistency.
Submitted by: sheldonh
2000-04-03 09:40:04 +00:00
chris
1289a633c8
- Add HPFS and NWFS vnode tags.
...
- Update ``struct vnode'' changes from revisions 1.91, 1.94, 1.98, 1.101,
1.102.
Reviewed by: alfred
2000-04-02 23:53:57 +00:00
jmb
090fde9a76
Add support for the LinkSys USB10T network adapter that
...
contains the ADMtek Pegasus AN986 USB chipset. The
adapter supports both 10BaseT and 100BaseT (including
full-duplex). The product code for these adapters is
0x2206.
2000-04-02 12:43:34 +00:00
asmodai
e6ca4d95a0
Add and install BUS_SETUP_INTR.9.
...
This effectively replaces BUS_CREATE_INTR.9 and BUS_CONNECT_INTR.9.
Reviewed by: n_hibma
2000-04-02 12:00:52 +00:00
asmodai
11f5dbf689
Get rid of the manpages for BUS_CREATE_INTR() and BUS_CONNECT_INTR().
...
These got replaced by BUS_SETUP_INTR().
This once again illustrates an API change without informing -doc, so
that these sort post cleanup actions could've been avoided.
And then people wonder why the docs suck so much at times.
Reviewed by: peter
2000-04-02 09:25:15 +00:00
yokota
b8d756efbd
- Reflect recent update.
2000-04-02 08:25:34 +00:00
grog
93a4c91d7e
Enable installation of picobsd.8
2000-04-02 04:32:44 +00:00
asmodai
69beb5834b
Remove spurious .Fc which caused this manpage to be closed
...
prematurely.
2000-04-01 20:31:07 +00:00
imp
85126e2d6b
Add notes about pci support.
2000-04-01 06:46:17 +00:00
dillon
d7295a1a39
Add a sysctl to specify the amount of UDP receive space NFS should
...
reserve, in maximal NFS packets. Originally only 2 packets worth of
space was reserved. The default is now 4, which appears to greatly
improve performance for slow to mid-speed machines on gigabit networks.
Add documentation and correct some prior documentation.
Problem Researched by: Andrew Gallatin <gallatin@cs.duke.edu>
Approved by: jkh
2000-03-27 21:38:35 +00:00
roberto
48dd6f2068
Really remove all traces of wst.4 from the Makefile.
...
Re-broken by: n_hibma :)
2000-03-27 15:22:18 +00:00
jhb
91203ebc06
Update STAILQ example to use STAILQ_REMOVE_HEAD instead of
...
TAILQ_REMOVE_HEAD.
PR: docs/17590
Submitted by: Benno Rice <benno@netizen.com.au>
2000-03-27 13:26:45 +00:00
n_hibma
37935ccdc3
USB Zip 250 drives are now supported
...
Obtained from: Anders Andersson <anders@sanyusan.se>
2000-03-27 09:02:01 +00:00
n_hibma
2bb52bfb41
Undo the previous commit. Early morning commits are no good either. I
...
meant to commit umass.4
2000-03-27 08:59:53 +00:00
charnier
6e109d2561
Remove duplicate word
2000-03-26 15:24:53 +00:00
hm
ab98c8b96b
pcvt cleanup. Update the pcvt(4) manpage to reflect current state.
2000-03-26 12:41:37 +00:00
des
e270c54784
s/curproc/self/
...
Spotted by: Ben Smithurst <ben@scientia.demon.co.uk>
2000-03-26 12:20:35 +00:00
des
cfc69d4ffa
Add a manpage for linprocfs.
2000-03-25 14:03:31 +00:00
mpp
c5558d929a
Fix some spelling errors.
2000-03-24 02:17:04 +00:00
mpp
dc5007186c
Fix a couple of typos and make the FILES section follow mdoc style.
2000-03-24 01:57:57 +00:00
mpp
5c61b43d27
Minor style fixes: freebsd.org -> FreeBSD.org
2000-03-24 01:49:46 +00:00
billf
e6908e3e94
Grammar nit ("has not got a very good recovery" -> "does not recover well")
2000-03-24 01:41:58 +00:00
mpp
20d005f1a0
Minor style fixes: freebsd.org -> FreeBSD.org
2000-03-24 01:37:42 +00:00
mpp
646d7ca28d
mdoc style fixes.
2000-03-24 01:15:04 +00:00
mpp
ff3d188205
Fix a spelling error.
2000-03-24 00:47:49 +00:00
bde
fce3c66cc6
Fixed missing #include of <sys/types.h> in synopsis.
2000-03-23 16:20:20 +00:00
bde
a0e94fcb09
Fixed bitrot in synopsis (the third arg of vsunlock went away).
2000-03-23 14:33:14 +00:00
ru
cd2b2c7148
Refer to the correct include file for the IPTOS_XXX constants.
2000-03-22 16:02:49 +00:00
n_hibma
ed21c3fe28
Remove the trailing zeroes on the entries for the kernel config.
...
Submitted by: Anders Andersson <anders@sanyusan.se>
2000-03-22 10:18:43 +00:00
asmodai
09344fa4cd
Remove trailing comma.
2000-03-21 17:34:56 +00:00
asmodai
9ac7e48ff7
As bde was kind to point out:
...
"Man pages shouldn't refer to higher level interfaces
built using the interfaces in the man pages."
Submitted by: bde
2000-03-21 16:38:19 +00:00
asmodai
0cdc6910f4
Fix lameness I introduced by typing the Xr as a filename, sigh.
2000-03-21 13:46:57 +00:00
asmodai
da862b0d61
Fix EXAMPLE -> EXAMPLES.
...
Add Xr's for SPLASSERT and CONDSPLASSERT.
2000-03-21 13:21:36 +00:00
asmodai
103cdcbbac
Assorted bag o' fixes:
...
fix Jonathan's name, fix copyright date, man -> manual,
add const before char *msg, add email address.
2000-03-21 13:18:40 +00:00
shin
9158e5fe47
Remove references to man pages that don't exist.
...
PR: docs/17506
2000-03-21 02:46:28 +00:00
n_hibma
1e8b33b368
Add entry for the Microtech USB to SCSI cable.
2000-03-20 20:33:09 +00:00
bde
f14ba97315
Actually install KASSERT.9.
2000-03-20 20:23:43 +00:00
green
90aaf29e78
Both:
...
Get rid of the "char *" before level which made no sense. Change
"char *msg" to the properly const-unpoisoned one.
Just SPLASSERT.9:
Add an Xref to CONDSPLASSERT(9). Change the function name "rtredirect"
to the correct "rtalloc".
2000-03-20 14:44:42 +00:00
sheldonh
caa2b1b130
Move the Nm macro from the middle of a sentence onto its own line.
...
Submitted by: Brian Handy <handy@lambic.physics.montana.edu>
2000-03-20 14:18:31 +00:00
asmodai
806a033cc3
Fix some mdoc nits.
...
.Fd - > .Cd
EXAMPLE - > EXAMPLES
man page -> manual page
Submitted by: large part by sheldonh
2000-03-20 12:29:59 +00:00
asmodai
a7618b52e0
Fix typo.
2000-03-19 16:52:59 +00:00
asmodai
c85887e8e1
Trim trailing whitespace.
2000-03-19 15:55:38 +00:00
asmodai
3e0529de45
Document the sysctl knob for setting the severity of the SPLASSERT
...
macros.
Reviewed by: ps
2000-03-19 15:47:33 +00:00
asmodai
7a6ba84531
Spell Jonathan's name correctly in the copyright. Which is funny,
...
considering the fact he wrote it himself. =)
Also add his email address in the AUTHORS section.
2000-03-19 14:46:56 +00:00
asmodai
322355cc5f
Add the manpage for CONDSPLASSERT().
...
This was based upon the manpage written by jmb for SPLASSERT().
2000-03-19 14:43:03 +00:00
asmodai
b6fdd2ec86
After about two months I am the first to notice that SPLASERT.9 never
...
got installed.
Also, correct the copyright to a more realistic date (1996->2000).
Fix some wordings and omissions.
2000-03-18 21:51:16 +00:00
n_hibma
0cf189fc93
Reflect the fact that we supported the Y-E Data floppy as well.
2000-03-18 17:59:27 +00:00
rwatson
7432002de6
Introduce a new bd_seesent flag to the BPF descriptor, indicating whether or
...
not the current BPF device should report locally generated packets or not.
This allows sniffing applications to see only packets that are not generated
locally, which can be useful for debugging bridging problems, or other
situations where MAC addresses are not sufficient to identify locally
sourced packets. Default to true for this flag, so as to provide existing
behavior by default.
Introduce two new ioctls, BIOCGSEESENT and BIOCSSEESENT, which may be used
to manipulate this flag from userland, given appropriate privilege.
Modify bpf.4 to document these two new ioctl arguments.
Reviewed by: asmodai
2000-03-18 06:30:42 +00:00
peter
ef5b1638f2
wfd is gone (pre-ata ide floppy (ls-120, zip) driver)
2000-03-17 22:27:27 +00:00
peter
a8c7984005
wst is gone (pre-ata ide tape driver)
2000-03-17 22:25:55 +00:00
chris
254ad1ad02
Combine two sentence fragments to form one complete sentence,
...
``Depending on the setting of the sysctl variable `net.inet.ipfw.one_pass'
Packets coming from a pipe ...''
into
``... the sysctl variable `net.ipfw.one_pass', packets coming from ...''
2000-03-17 20:04:08 +00:00
chris
5e9c416678
Be consistent and use .Ql for sysctl variables, instead of inconsistent
...
.Bd -literal with inconsistent indenting.
2000-03-17 20:01:38 +00:00
chris
70a58ec38a
Be consistent with struct vattr' naming. Half of this manual used
vpp'
...
while the other half used `vap', and in one case resulted in code that
made no sense. Replaced all of them with `vap'.
(Typically, `vpp' is a pointer to a pointer to a struct vnode anyway).
2000-03-16 22:40:38 +00:00
sheldonh
0e1f6d8bdd
Clean up mdoc:
...
* Apply sentence breaking style.
* Add missing periods to the ends of sentences.
* Replace bogus use of Nm with Em and Pa as appropriate.
* Rename the EXAMPLE section to EXAMPLES.
* Tidy up wording and fix spelling errors.
* Use an Rs -> Re block instead of Xr for the SourceForge URL.
* Correct the SourceForge URL.
* Improve the compilation instructions for the SourceForge utilities.
Approved by: n_hibma
2000-03-16 13:30:42 +00:00
n_hibma
5c1a46084c
Update the list of supported devices.
2000-03-16 09:22:46 +00:00
n_hibma
35fe05e5a2
nclude the manpage for the urio driver in the world.
2000-03-16 09:18:30 +00:00
n_hibma
914df027ab
Please welcome the URio driver. Written by
...
Iwasa Kazmi <kzmi\@ca2.so-net.ne.jp>
2000-03-16 09:16:14 +00:00
sheldonh
c65361b3fe
Discourage the pathalogical practice of configuring the 3c509 in EISA
...
mode on non-EISA systems.
PR: 2598
2000-03-15 20:48:49 +00:00
shin
288c5bf6e8
Wording fixes and mdoc fixes.
...
Submitted by: sheldonh
Reviewed by: sheldonh
2000-03-15 03:38:22 +00:00
shin
099b4f9e01
Backout previous changes. The period at the end is correct,
...
when it is the last of the sentences.
Specified by: mpp, sheldonh
2000-03-15 03:33:30 +00:00
archie
3c6de034ba
- Document updates in iface netgraph node type functionality
...
- Remove makefile hacks for opt_inet.h, etc: the KLD now supports
whatever address families your kernel was compiled with automagically
2000-03-13 19:19:48 +00:00
archie
b749ed4523
Fix typo.
...
Reported by: Robert Swindells <swindellsr@genrad.co.uk>
2000-03-13 18:29:58 +00:00
asmodai
f8fad4c053
Fix another include error. Inspired by the last commit.
2000-03-13 13:41:40 +00:00
asmodai
2a0970a636
Fix include error.
...
Submitted by: ru
2000-03-13 13:36:40 +00:00
sheldonh
e32b39ed15
Add appropriate MLINKS for rc.*.
2000-03-13 13:19:42 +00:00
shin
6962f77cb9
Import from KAME. Mainly, IPv6 sysctl mib values related update.
...
Obtained from: KAME project
2000-03-12 18:09:58 +00:00
shin
121378791c
Merge from KAME. Basically man doc improvement and contents fix.
...
Obtained from: KAME project
2000-03-12 16:37:25 +00:00
shin
1c9224ffb1
Import ip6 and icmp6 man from KAME.
...
Obtained from: KAME project
2000-03-12 16:29:51 +00:00