Commit Graph

3384 Commits

Author SHA1 Message Date
David Greenman
f5526ddb48 Implemented an nfs_node hash list lock, similar to what was implemented
in ffs_vget(), and for the same reason: to prevent a race condition that
results in duplicate vnodes/NFSnodes being allocated.
1995-07-21 10:25:13 +00:00
David Greenman
44918dfed7 Re-lookup the buffer if the vnode isn't locked. The previous check for
VBLK vnodes isn't adequate since all NFS nodes aren't locked, either. The
result is a race condition that would lead to duplicate buffers at the
same block offset.

Submitted by:	John Dyson
1995-07-21 04:55:45 +00:00
David Greenman
2094ddb6f0 Implement a lock in ffs_vget to prevent a race condition where two processes
try allocate the same inode/vnode, causing a duplicate.

Submitted by:	Matt Dillon, slightly reworked by me.
1995-07-21 03:52:40 +00:00
Paul Traina
cfb5972713 Remove vat_audio driver support 1995-07-20 16:31:22 +00:00
David Greenman
24aa09cd4f vnode_pager_alloc() never returns NULL, so don't check for it. 1995-07-20 09:43:12 +00:00
David Greenman
b367ddb191 #if 0'd one of the DIAGNOSTIC checks in vm_page_alloc(). It was too
expensive for "normal" use.
1995-07-20 05:28:07 +00:00
David Greenman
e9857eee2b Rewrote memory sizing code to generally deal with holes in extended memory.
This code change should allow certain Compaq machines with a 128K hole
at 16MB to work.
1995-07-19 06:37:12 +00:00
Peter Wemm
42c03a52ba Change the compile-time option of DIRECTED_BROADCAST into a sysctl
variable underneath ip, "directed-broadcast".
Reviewed by:	David Greenman
Obtained from:	NetBSD, by Darren Reed.
1995-07-18 09:56:44 +00:00
Justin T. Gibbs
31acd246c0 Allow the specification of the controller bus when wiring down scsi buses.
This is performed by using a line similar to:

controller scbus0 at ahc0 bus 1

to wire scbus0 to the second bus on an adaptec 2742T controller.

Reviewed by: Peter Dufault(dufault@hda.com), Rod Grimes(rgrimes@FreeBSD.org)
1995-07-17 23:38:16 +00:00
Justin T. Gibbs
eb62827d8a Specify the controller bus in the scsi_link structure to allow hardwired
buses on multi-bus controllers.  Currently only affects the 274xT controllers.

Reviewed by: Peter Dufault(dufault@hda.com), Rod Grimes(rgrimes@FreeBSD.org)
1995-07-17 23:35:16 +00:00
Justin T. Gibbs
4fbaf9a7c0 Add examples for wiring down scbuses to drivers as well as specifying
controller buses for multi-bus controllers.
1995-07-17 23:32:53 +00:00
Garrett Wollman
357b78a939 Return EDESTADDRREQ rather than EADDRNOTAVAIL if the user attempts to
half-configure a point-to-point interface.

Submitted by:	Jonathan M. Bresler <jmb@kryten.atinc.com>
1995-07-17 15:15:15 +00:00
David Greenman
1ce781c3af Fixed "bufspace" calculation. It was lossy in some circumstances of the
buffer resizing and caused a "newbuf" deadlock.

Reviewed by:	John Dyson & David Greenman
Submitted by:	Peter Wemm
1995-07-17 06:26:07 +00:00
David Greenman
6263a19a10 Added crdselect definition for !NCRD case. 1995-07-16 14:34:57 +00:00
Peter Wemm
1174c7d121 This fixes a compiler warning, and a cosmetic problem with the linux
emul code when compiling with "options KTRACE".
ktrsyscall() was expecting an array of integers, this was passing the
address of a structure containing an array of integers..
The cosmetic problem was that it was calling the "enter syscall"
trace hook twice - this looks like a cut/paste error/typo.
1995-07-16 14:10:55 +00:00
David Greenman
2a4895f4bb 1) Merged swpager structure into vm_object.
2) Changed swap_pager internal interfaces to cope w/#1.
3) Eliminated object->copy as we no longer have copy objects.
4) Minor stylistic changes.
1995-07-16 13:28:37 +00:00
Poul-Henning Kamp
8a7580c3fe Reviewed by: phk
Submitted by:	Andrew McRae <andrew@mega.com.au>

Some initial commits from the pcmcia stuff, to make life easier for the
testers.

We will use the name "pccard" since that is really the buzzword at present.
1995-07-16 10:45:06 +00:00
Poul-Henning Kamp
7a2dada545 Make the bootinfo structure visible from sysctl.
This can be used in libdisk to guess a better bios-geometry.
1995-07-16 10:33:38 +00:00
Joerg Wunsch
446cee6e6d Include ``options POWERFAIL_NMI'' for owners of older (non-apm)
notebooks where a powerfail condition (external power drop; battery
state low) is signalled by an NMI.  Makes it beep instead of panicing.

Reviewed by:	davidg
1995-07-16 10:31:26 +00:00
Joerg Wunsch
dd9ba30492 Protect TTYHOG by #ifndef so it can be overridden from the config
file.

Submitted by:	hsu@clinet.fi (Heikki Suonsivu)
1995-07-16 10:22:37 +00:00
Joerg Wunsch
a7957cb6ce There is a small bug in the cd9660 code that prevents stating of
associated files.

Submitted by:	leo@dachau.marco.de (Matthias Pfaller)
Not-obtained from: NetBSD.  Instead sent directly to me by Matthias.
(Sorry, this is to prevent people from claiming i might have gotten
this from NetBSD. :)
1995-07-16 10:20:56 +00:00
Bruce Evans
97e156674d Don't include <sys/tty.h> in drivers that aren't tty drivers or in general
files that don't depend on the internals of <sys/tty.h>
1995-07-16 10:13:08 +00:00
Bruce Evans
1be9be9647 Fix compiler warnings (systm.h wasn't included). 1995-07-16 10:07:40 +00:00
Justin T. Gibbs
ffc2aaf2d8 Do not set SCSI_NOSLEEP on every tape command (the exception being during
probes).  Apart from there being no reason to set SCSI_NOSLEEP on every
tape command, this prevents controller drivers from sleeping when resources
are fully utilized causing unecessary "Oops not queued" errors.  This is
only noticed for controllers that can run out of resources like the
27/2842 adaptec controllers.  Before this fix, it is almost impossible to
perform extended tape operations if more than one scsi disk is on the
bus with the tape drive with these controllers.  This does not address a
similar problem that could occur if devices are probed while other targets
are active since SCSI_NOSLEEP will still be set in that case.
1995-07-16 09:13:14 +00:00
Bruce Evans
567e21c2c0 Add tw. 1995-07-16 08:55:04 +00:00
David Greenman
9e951f36f1 Truncate the fault address to a page boundry when calling vm_fault(). The
last change to fix the fault-twice bug with page tables wasn't quite
complete.
1995-07-16 05:39:22 +00:00
David Greenman
8393c48a22 Resize buffers if they aren't the correct size. Several months ago we
made a change to NFS that caused buffers at EOF to be variable size. This
had the undesired side-effect of breaking delayed writes on NFS. This
fixes it.

Submitted by:	John Dyson
1995-07-15 16:01:46 +00:00
David Greenman
4a67eb7121 Fixed bug that caused page tables to be faulted twice instead of once.
Submitted by:	John Dyson
1995-07-14 09:25:51 +00:00
Doug Rabson
5d81e553a2 I believe that the following fix to nfs_vnops.c should do the trick w.r.t.
the problem "when a file is truncated on the server after being written on
a client under NFSv3, the client doesn't see the size drop to zero".
(As you noted, the problem is that NMODIFIED wasn't being cleared by nfs_close
 when it flushed the buffers. After checking through the code, the only place
 where NMODIFIED was used to test for the possibility of dirty blocks was in
 nfs_setattr(). The two cases are safe to do when there aren't dirty blocks,
 so I just took out the tests. Unfortunately, testing for
 v_dirtyblkhd.lh_first being non-null is not sufficient, since there are
 times when the code moves blocks to the clean list and then back to the
 dirty list.)

Submitted by:	rick@snowhite.cis.uoguelph.ca
1995-07-13 17:55:12 +00:00
Bruce Evans
d3ebcaeb6b Fix benign function type mismatch. 1995-07-13 16:08:57 +00:00
Jordan K. Hubbard
2c3c9fc440 The following patch for v1.8 (2.0.5R) of seagate.c allows it to work with
Future Domain TMC-885 controllers. These beasts were just different enough in
a number of perverse ways to be recognised but not work with the seagate
stuff. I also whacked in blind transfers for DATAIN and DATAOUT phases - this
more than doubles my throughput. If you're dubious about that, comment out the
definition of SEA_BLINDTRANSFER. Anyway if you're running an ST01 or TMC-950
controller, please give this a go, I'd like to see if anything's broken for
those beasts.

Submitted by:	Stephen Hocking <sysseh@devetir.qld.gov.au>
1995-07-13 15:01:38 +00:00
Rodney W. Grimes
160eabb8c0 This is a major rework of newvers.sh to put it back much closer to
what CSRG had, plus make things like, TYPE, REVISION, and BRANCH
easy to set, and derive RELEASE and VERSION from them.

Kill the JUST_TELL_ME hack, it is no longer needed.

Kill DISTNAME, I could find no reveference to it any place in the
source tree.

Now I just need to rework a few bits in release/Makefile, but want
to wait and talk to jkh about that.

Oh, and your now all running:
TYPE="FreeBSD"
REVISION="2.2"
BRANCH="CURRENT"

and the -BUILD-yymmdd is dead and gone.  The date was already in the
version[] string, no need for it to be there in 2 formats!
1995-07-13 10:54:23 +00:00
David Greenman
588d138f56 Added a copyright to this file. 1995-07-13 10:29:34 +00:00
David Greenman
2541af0bba Oops, forgot to add the "default" pager files...
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
      proc or any VM system structure will have to be rebuilt!!!

Much needed overhaul of the VM system. Included in this first round of
changes:

1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
   haspage, and sync operations are supported. The haspage interface now
   provides information about clusterability. All pager routines now take
   struct vm_object's instead of "pagers".

2) Improved data structures. In the previous paradigm, there is constant
   confusion caused by pagers being both a data structure ("allocate a
   pager") and a collection of routines. The idea of a pager structure has
   escentially been eliminated. Objects now have types, and this type is
   used to index the appropriate pager. In most cases, items in the pager
   structure were duplicated in the object data structure and thus were
   unnecessary. In the few cases that remained, a un_pager structure union
   was created in the object to contain these items.

3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
   be removed. For instance, vm_object_enter(), vm_object_lookup(),
   vm_object_remove(), and the associated object hash list were some of the
   things that were removed.

4) simple_lock's removed. Discussion with several people reveals that the
   SMP locking primitives used in the VM system aren't likely the mechanism
   that we'll be adopting. Even if it were, the locking that was in the code
   was very inadequate and would have to be mostly re-done anyway. The
   locking in a uni-processor kernel was a no-op but went a long way toward
   making the code difficult to read and debug.

5) Places that attempted to kludge-up the fact that we don't have kernel
   thread support have been fixed to reflect the reality that we are really
   dealing with processes, not threads. The VM system didn't have complete
   thread support, so the comments and mis-named routines were just wrong.
   We now use tsleep and wakeup directly in the lock routines, for instance.

6) Where appropriate, the pagers have been improved, especially in the
   pager_alloc routines. Most of the pager_allocs have been rewritten and
   are now faster and easier to maintain.

7) The pagedaemon pageout clustering algorithm has been rewritten and
   now tries harder to output an even number of pages before and after
   the requested page. This is sort of the reverse of the ideal pagein
   algorithm and should provide better overall performance.

8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
   have been removed. Some other unnecessary casts have also been removed.

9) Some almost useless debugging code removed.

10) Terminology of shadow objects vs. backing objects straightened out.
    The fact that the vm_object data structure escentially had this
    backwards really confused things. The use of "shadow" and "backing
    object" throughout the code is now internally consistent and correct
    in the Mach terminology.

11) Several minor bug fixes, including one in the vm daemon that caused
    0 RSS objects to not get purged as intended.

12) A "default pager" has now been created which cleans up the transition
    of objects to the "swap" type. The previous checks throughout the code
    for swp->pg_data != NULL were really ugly. This change also provides
    the rudiments for future backing of "anonymous" memory by something
    other than the swap pager (via the vnode pager, for example), and it
    allows the decision about which of these pagers to use to be made
    dynamically (although will need some additional decision code to do
    this, of course).

13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
    object" code has been removed. MAP_COPY was undocumented and non-
    standard. It was furthermore broken in several ways which caused its
    behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
    continue to work correctly, but via the slightly different semantics
    of MAP_PRIVATE.

14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
    threads design can be worked around in other ways. Both #12 and #13
    were done to simplify the code and improve readability and maintain-
    ability. (As were most all of these changes)

TODO:

1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
   this will reduce the vnode pager to a mere fraction of its current size.

2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
   information provided by the new haspage pager interface. This will
   substantially reduce the overhead by eliminating a large number of
   VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
   improved to provide both a "behind" and "ahead" indication of
   contiguousness.

3) Implement the extended features of pager_haspage in swap_pager_haspage().
   It currently just says 0 pages ahead/behind.

4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
   via a much more general mechanism that could also be used for disk
   striping of regular filesystems.

5) Do something to improve the architecture of vm_object_collapse(). The
   fact that it makes calls into the swap pager and knows too much about
   how the swap pager operates really bothers me. It also doesn't allow
   for collapsing of non-swap pager objects ("unnamed" objects backed by
   other pagers).
1995-07-13 10:15:03 +00:00
David Greenman
24a1cce34f NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!

Much needed overhaul of the VM system. Included in this first round of
changes:

1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
   haspage, and sync operations are supported. The haspage interface now
   provides information about clusterability. All pager routines now take
   struct vm_object's instead of "pagers".

2) Improved data structures. In the previous paradigm, there is constant
   confusion caused by pagers being both a data structure ("allocate a
   pager") and a collection of routines. The idea of a pager structure has
   escentially been eliminated. Objects now have types, and this type is
   used to index the appropriate pager. In most cases, items in the pager
   structure were duplicated in the object data structure and thus were
   unnecessary. In the few cases that remained, a un_pager structure union
   was created in the object to contain these items.

3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
   be removed. For instance, vm_object_enter(), vm_object_lookup(),
   vm_object_remove(), and the associated object hash list were some of the
   things that were removed.

4) simple_lock's removed. Discussion with several people reveals that the
   SMP locking primitives used in the VM system aren't likely the mechanism
   that we'll be adopting. Even if it were, the locking that was in the code
   was very inadequate and would have to be mostly re-done anyway. The
   locking in a uni-processor kernel was a no-op but went a long way toward
   making the code difficult to read and debug.

5) Places that attempted to kludge-up the fact that we don't have kernel
   thread support have been fixed to reflect the reality that we are really
   dealing with processes, not threads. The VM system didn't have complete
   thread support, so the comments and mis-named routines were just wrong.
   We now use tsleep and wakeup directly in the lock routines, for instance.

6) Where appropriate, the pagers have been improved, especially in the
   pager_alloc routines. Most of the pager_allocs have been rewritten and
   are now faster and easier to maintain.

7) The pagedaemon pageout clustering algorithm has been rewritten and
   now tries harder to output an even number of pages before and after
   the requested page. This is sort of the reverse of the ideal pagein
   algorithm and should provide better overall performance.

8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
   have been removed. Some other unnecessary casts have also been removed.

9) Some almost useless debugging code removed.

10) Terminology of shadow objects vs. backing objects straightened out.
    The fact that the vm_object data structure escentially had this
    backwards really confused things. The use of "shadow" and "backing
    object" throughout the code is now internally consistent and correct
    in the Mach terminology.

11) Several minor bug fixes, including one in the vm daemon that caused
    0 RSS objects to not get purged as intended.

12) A "default pager" has now been created which cleans up the transition
    of objects to the "swap" type. The previous checks throughout the code
    for swp->pg_data != NULL were really ugly. This change also provides
    the rudiments for future backing of "anonymous" memory by something
    other than the swap pager (via the vnode pager, for example), and it
    allows the decision about which of these pagers to use to be made
    dynamically (although will need some additional decision code to do
    this, of course).

13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
    object" code has been removed. MAP_COPY was undocumented and non-
    standard. It was furthermore broken in several ways which caused its
    behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
    continue to work correctly, but via the slightly different semantics
    of MAP_PRIVATE.

14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
    threads design can be worked around in other ways. Both #12 and #13
    were done to simplify the code and improve readability and maintain-
    ability. (As were most all of these changes)

TODO:

1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
   this will reduce the vnode pager to a mere fraction of its current size.

2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
   information provided by the new haspage pager interface. This will
   substantially reduce the overhead by eliminating a large number of
   VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
   improved to provide both a "behind" and "ahead" indication of
   contiguousness.

3) Implement the extended features of pager_haspage in swap_pager_haspage().
   It currently just says 0 pages ahead/behind.

4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
   via a much more general mechanism that could also be used for disk
   striping of regular filesystems.

5) Do something to improve the architecture of vm_object_collapse(). The
   fact that it makes calls into the swap pager and knows too much about
   how the swap pager operates really bothers me. It also doesn't allow
   for collapsing of non-swap pager objects ("unnamed" objects backed by
   other pagers).
1995-07-13 08:48:48 +00:00
Poul-Henning Kamp
05f65b296e Change this to do what it should have done from the start.
Add argument for buffer for output.
Fix manuals.
1995-07-12 09:13:49 +00:00
Bruce Evans
270d5e9f91 Optimize the zeroing of quotes. b_to_q() was always taking about 20% of
its time zeroing quotes although quotes are not very common.  E.g., there
are never any quotes in output queues.
1995-07-11 19:39:54 +00:00
Bruce Evans
5182dcbec2 Rearrange the inner loop of scanc() to get better code on i*86's
(on an i486, 10 cycles (+ cache misses) instead of 15).  The
change should be a no-op if the compiler is any good.  The best
possible i*86 code for the same algorithm is only 1 more cycle
faster on i486's so I don't want to bother implementing an
assembler version.

scanc() is a bottleneck for OPOST processing.  It is naturally
about 4 times as slow as bcopy() on 32-bit systems.
1995-07-11 18:50:47 +00:00
Bruce Evans
d800e06858 Fix races in scstart(). q_to_b() wasn't called at spltty(), so there
were two races:
- q_to_b() might unexpectedly return 0 (e.g, after a keyboard signal
  flushes the output queue and isn't echoed).  ansi_put() interprets
  0 bytes as 4GB...
- more output (e.g. for echoes) might arrive afer q_to_b() returns 0.
  Then scstart() returns presumably and the new output might not be
  handled for a long time.

Remove unused function scxint().

Fix prototypes (foo() isn't a prototype).
1995-07-11 18:34:30 +00:00
Bruce Evans
f2fb20ef41 Speed up the inner loop of ansi_put() by a few percent.
syscons' output is now only about 4-5 times slower than I want.
It loses a factor of 2 for scrolling output by unnecessarily copying
the screen buffer, a factor of 4/3 for dumb OPOST processing, and
a factor of 3/2 for clist processing.
1995-07-11 17:59:22 +00:00
Bruce Evans
7fbcd76bb5 Enable pcvt in LINT and don't generate a compile time error if syscons
and pcvt are both configured when LINT is defined.  There will be a
link time error instead.  This is to test building of pcvt more often.
1995-07-11 17:20:20 +00:00
Jordan K. Hubbard
15c761840a Release summary: (detailed descriptions in Edit History in matcd.c)
Adds support for non-Sound Blaster host adapters, including those
distributed by Reveal, Lasermate, IBM, Media Vision, Crystal and others.
The driver automatically senses the correct adapter type and you can
have both in the system at the same time.
(This change should eliminate a few complaints.)

Corrected bit-masking problem that prevented use on SB Vibra-16 boards.

Declared some internal data and functions static that should have been
that way all along.

Documentation changes reflect the new hardware support and change the
appearance version to 2.0.5 (was 2.1).    Nice and tidy.   :-)


Beta testers have verified functionality on SB16, Vibra-16, Media Vision
and Reveal adapters.   -Wall still shows no warnings.

                                        Frank Durda IV
                                        uhclem%nemesis@fw.ast.com
Submitted by:	Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-07-11 03:03:47 +00:00
Garrett Wollman
5b7ee6ed04 ICMP messages received from broken hosts which reply to multicast packets
were mistakenly delivered, rather than getting thrown out, which caused
substantial lossage.

Submitted by: Bill Fenner <fenner@parc.xerox.com>
1995-07-10 16:16:00 +00:00
Garrett Wollman
dd22498271 tcp_input.c - keep track of how many times a route contained a cached rtt
or ssthresh that we were able to use

tcp_var.h - declare tcpstat entries for above; declare tcp_{send,recv}space

in_rmx.c - fill in the MTU and pipe sizes with the defaults TCP would have
	used anyway in the absence of values here
1995-07-10 15:39:16 +00:00
Garrett Wollman
8e718bb4af When adding a route, set rt_ifa and rt_ifp a little earlier so that
the protocol-specific add routine can examine it if desired.
1995-07-10 15:22:37 +00:00
David Greenman
6306c897b5 swapout_threads() -> swapout_procs(). 1995-07-10 08:53:22 +00:00
David Greenman
f2daac0c69 Increased global RSS limit to total RAM. 1995-07-10 08:48:58 +00:00
David Greenman
6b43f2f020 Killed bogus sparc #ifdef. 1995-07-10 08:39:49 +00:00
David Greenman
c6e8c3576e Fixed panic that occurs on certain firewall rejected packets that was
caused by dtom() being used on an mbuf cluster. The fix involves passing
around the mbuf pointer.

Submitted by:	Bill Fenner
1995-07-09 14:29:46 +00:00
Joerg Wunsch
6aeb10f748 PR #kern/572:
>Synopsis:       Booting w/scsi tape in drive causes first use to fail

Booting with a tape in a SCSI tape drive will cause the first
use of the tape to fail with the following message:

st0: bad request, must be between 0 and 0.

Submitted by:	mpp@legarto.minn.net (Mike Pritchard)
1995-07-09 08:14:24 +00:00
Joerg Wunsch
6f64074e6b Move some struct definitions outside of struct's, so their scopes for
C++ will match the scopes for C.

Submitted by:	Warner Losh
1995-07-09 08:12:27 +00:00
David Greenman
06cb725951 Moved call to VOP_GETATTR() out of vnode_pager_alloc() and into the places
that call vnode_pager_alloc() so that a failure return can be dealt with.
This fixes a panic seen on NFS clients when a file being opened is deleted
on the server before the open completes.
1995-07-09 06:58:03 +00:00
Peter Wemm
6ece4a516d This implements enough of the BSDI extensions to the net-2 ogetkerninfo()
syscall to allow applications linked against their libc's uname() to
work.  Netscape 1.1N being a prime example, which prints:
"uname() failed. cant tell what system we're running on".
This change is a little ugly, but that's mainly because of the "interesting"
semantics of the BSDI extension.
Since ogetkerninfo() is only enabled by COMPAT_43, Netscape will only
be affected on kernels with that option (eg: "GENERIC")
Reviewed by:	davidg
1995-07-09 02:49:30 +00:00
Andreas Schulz
f8e365a0e0 Correct a typo in a comment. 1995-07-08 22:09:11 +00:00
Joerg Wunsch
aed5ecb7bf Several constants have been missing in the SysV IPC header files that
are recommended by the literature.

Fixes PR# misc/575: constants in sys/sem.h...

Submitted by:	daveho@infocom.com (Dave Hovemeyer)
1995-07-08 16:36:30 +00:00
Joerg Wunsch
78988ab839 PR #kern/600: PPP does not pay attention to IPTOS_LOWDELAY
Kernel PPP doesn't pay attention to IPTOS_LOWDELAY, but uses
        a table of port numbers, which isn't a generic method.  The following
        patch fixes this (the table is still used, but in addition
        PPP queues the packet in fastq if IPTOS_LOWDELAY is set.

Obtained from:	Tatu Ylonen <ylo@cs.hut.fi>
Submitted by:	Heikki Suonsivu <hsu@clinet.fi>
1995-07-08 16:34:55 +00:00
David Greenman
e0dca2b939 Improve negative usecount diagnostic a little. 1995-07-08 04:10:32 +00:00
David Greenman
e8cf02294a Added missing splx() in DIAGNOSTIC code.
Suggested by enami@sys.ptg.sony.co.jp.
1995-07-08 04:03:12 +00:00
David Greenman
083c109df6 The generated VCALL always uses the first vp which in the case of /link/
might not be handled by the same FS as the directory (e.g. special device
files)...so it must be special-cased. This bug is seen when doing
"ln /dev/console /dev/foo" or equivilent and first appeared after I fixed
the argument order of VOP_LINK.  YUCK! There really needs to be a way of
specifying what vp to use in the VCALL; doing this could fix the strategy
and bwrite special-cases, too.
1995-07-07 13:41:28 +00:00
Stefan Eßer
e9a9607fbb Put back second case of CC handler in NCR script. 1995-07-07 12:30:39 +00:00
Doug Rabson
05085e65f6 Use a consistent blocksize for sizing bufs to avoid panicing the bio system. 1995-07-07 11:01:31 +00:00
David Greenman
ef59de8517 Worked around a bug with if.c setting the interface up even when we don't
want it to.
1995-07-07 01:13:49 +00:00
David Greenman
93ff4e36e3 Modified joerg's last change to only set the interface "up" when setting
the address if the device is a SLIP device (i.e. "attached").
1995-07-06 11:55:18 +00:00
David Greenman
39d38f93e2 Fixed an object allocation race condition that was causing a "object
deallocated too many times" panic when using NFS.

Reviewed by:	John Dyson
1995-07-06 11:48:48 +00:00
Bruce Evans
42854d0eac Multiplex the soft tty interrupt some more to support the cy driver.
This should be configured better, perhaps by providing a software
interrupt and mask bit to go with every hardware interrupt.
1995-07-05 14:35:34 +00:00
Bruce Evans
aa96081f8b Fix error logging:
- get the timeout countdown right
- report everything before turning timeouts off.
1995-07-05 14:30:07 +00:00
Bruce Evans
94ec1fba9a Rewrite:
- use pseudo-dma
- provide the same features and interface as sio
- support multiple boards
- fix bugs.

Some compile-time configuration constants are set to support higher
speeds and Cyclom-16Y's at a 30% relative cost in efficiency.
Cyclom-16Y support is untested.
1995-07-05 12:15:52 +00:00
David Greenman
064d419196 Killed "maxmem" declaration. We don't have that variable in FreeBSD. 1995-07-05 12:04:51 +00:00
David Greenman
9f77221854 Protected entire epioctl routine with splimp(). In this case, it is better
form to do this than it is relying on individual subroutines (the logic
in epioctl is itself very minimal). Ideally, unnecessary splimp()'s should
now be removed if they exist; I'll leave this for a later date (a complete
code review of the driver needs to be done). Fixes a bug I noticed that
would show up when ifconfig'ing the interface down.
1995-07-05 07:21:34 +00:00
Justin T. Gibbs
cbc6d18d9f Add PCI Id for the 3940 controller. 1995-07-04 21:21:33 +00:00
Justin T. Gibbs
0698f32885 Dan Eischen's serial eeprom code. 1995-07-04 21:16:12 +00:00
Justin T. Gibbs
6b172e59a6 First pass cleanup of this driver. This pass does not include the sequencer
optimizations I have been working on yet, but does bring in some bug fixes
and performance improvments that were easy to regression test:

Setup the data fifo threshold and bus off timing correctly for 27/284x cards.
Users of these adapters with fast periferals (greater than 5MB/s) will notice
a big performance difference. (Sometimes as large as going from 3.7->8.3MB/s).

Fix handling of the active target flags.  Some of the outbs where missing
the base offset in the abort code.  The abort code still needs lots of work.

Support 3940 controllers, but only with 16 SCBs for now.  Eventually I'll
add support for all 255, but I need to find a tester for the code first since
we have to enable the cards external SRAM to do this.

Add Dan Eischen's serial eeprom reading facilities.  This allows the 2940
adapters to pull additional information left over from SCSI-Select right out
out of the configuration seeprom.

If the BIOS is disabled on 274x controllers, reset all target parameters
to there defaults since you can't rely on what is stored in scratch ram.

Report motherboard controllers as such.

Stick the first SG address and count into the SCB data and count areas for
all transfers in preparation of a later sequencer optimization.

Keep track of which targets can are allowed to have the disconnection
priveledge since this will be handled by the kernel driver in the future.

If a target issues a message reject in response to a tagged message,
disable tagged queuing for that target.  Some seagates say they can do
tagged queuing, but lie, and its a shame to have to disable tagged queuing
on all devices just because you have one that can't cope.
1995-07-04 21:14:45 +00:00
Justin T. Gibbs
62f23575fc Add entry for i386/scsi/93cx6.c, the file that handles serial eeprom
routines for the aic7xxx driver.  If and when other drivers start
to access similar serial eeproms, this file should probably be moved.
1995-07-04 21:00:53 +00:00
Justin T. Gibbs
475791c882 Change SCB_LIST_NULL to 0xff from 0x10 to allow for 255 commands. This
is needed for 3940 support.

Have tagged commands look to see if a target is "busy" with a non tagged
command before executing.  This prevents overlapped tagged and non tagged
commands which can happen since request sense commands are not tagged.
1995-07-04 20:58:57 +00:00
David Greenman
04c3f9f7ab Added some spaces for KNF. Moved some zero-initialized pointers into the
kernel's .bss.
1995-07-04 05:46:13 +00:00
David Greenman
09270166bb This is the end result of about a dozen passes through this code to fix
incorrect indents, a variety of poor coding practices such as comparing
pointers to constants ('0'), poor code structuring, etc, etc. This brings
the code up to the minimum standards for inclusion in FreeBSD.
1995-07-04 05:39:03 +00:00
David Greenman
ed64321cec Define TRUE and FALSE. 1995-07-04 05:29:30 +00:00
David Greenman
7e9367a410 1) Removed bogus #include
2) Rewrote "bad_packet" code to be less buggy and more readable.
3) Removed a pile of goto's; the code is now somewhat less reminiscent
   of a certain Italian pasta.
4) Changed all boolean returns of "0" and "1" to FALSE/TRUE.
1995-07-04 03:35:20 +00:00
Joerg Wunsch
40a63d93aa Slightly modify my previous change to return EINVAL instead of
EFAULT.

Submitted by:	Peter Wemm
1995-07-02 16:45:07 +00:00
Joerg Wunsch
1394aff0cd Revision 1.21 of if_sl.c broke the traditional behaviour that
assigning an address to an interface automatically marks this
interface IFF_UP.  The fix corrects this (and closes PR sys/577).
This is consistent with the way ethernet interfaces are being handled.
1995-07-02 09:01:02 +00:00
Joerg Wunsch
d700586c3a I saw a very low-key commit message on the netbsd mailing lists and
figured out what the problem was..  Anyway, I rate it as "highly
serious".

Submitted by:	peter@haywire.DIALix.COM (Peter Wemm)
1995-07-01 19:09:40 +00:00
Stefan Eßer
d2a2d5ec41 The PCI config mechanism 1 test failed for the Intel Aries.
Make it less strict ...

Submitted by:	NIIMI Satoshi <sa2c@and.or.jp>
1995-06-30 16:11:42 +00:00
Garrett Wollman
fc97827135 Keep track of the number of samples through the srtt filter so that we
know better when to cache values in the route, rather than relying on a
heuristic involving sequence numbers that broke when tcp_sendspace
was increased to 16k.
1995-06-29 18:11:24 +00:00
David Greenman
3d5e37c501 Removed "GATEWAY" consideration when calculating number of mbuf clusters.
It now always uses the value that was used for the GATEWAY case.
1995-06-29 08:21:32 +00:00
David Greenman
ac7e6123a6 Killed "TIMEZONE" and "DST" options. They have been forced to 0 by config
for more than a year now. Moved the declaration of 'tz' into kern_time.c.
1995-06-29 07:07:00 +00:00
Andrey A. Chernov
5575abefeb Fight with hanging modems continued:
return EIO after t_timeout expired instead infinite looping in "siotx"
in comparam, consuming CPU time.
1995-06-28 17:58:14 +00:00
Doug Rabson
b7ae4efa24 Use the correct cred for nfs_commit operations. 1995-06-28 17:33:39 +00:00
Stefan Eßer
57da02d3f3 Changes to support some CDROM drives and the Quantum Grand-Prix
series of hard disk drives, which don't accept any SCSI message
within an REQUEST SENSE command (i.e. even not an IDENTIFY to set
the LUN).
This patch obviates the need for QUIRK_NOMSG and thus all of the
device_tab[] entries in the NCR driver.
1995-06-28 16:40:58 +00:00
Stefan Eßer
c411726b79 Change message "not supported" to "no driver assigned", because
people tend to assume their devices won't work if they see this
message, though it may indicate that those devices just don't
need any PCI driver (e.g. devices that emulate an ISA card, or
that have been initialised by the BIOS and need no further care).
1995-06-28 16:32:54 +00:00
Stefan Eßer
1f8ca7ddc4 Give more detailed information about the type of bridge devices
found when probing the PCI bus.
1995-06-28 16:02:05 +00:00
Stefan Eßer
78e444665c Failure of the consistency checks for BIOS assigned mappings of busses
connected via PCI to PCI bridges is considered non fatal for now.
1995-06-28 15:59:04 +00:00
Stefan Eßer
0847c06d2e PCI configuration mechanism now determined by a method, that doesn't
fail on new hardware (Compaq Prolinea and Compaq Prosignea), and that
doesn't erroneously identify old mech. 2 chip sets as using mech. 1.
(See section 3.6.4.1.1 of the PCI bus specs rev. 2.0)
1995-06-28 15:54:57 +00:00
Gary Palmer
06cf932bcb Add a missing `goto' statement so that this compiles yet again. 1995-06-28 13:22:36 +00:00
David Greenman
6663c3d522 Removed extra semicolon. 1995-06-28 12:32:47 +00:00
David Greenman
b619731843 Don't include vm_pageout.h. 1995-06-28 12:31:47 +00:00
David Greenman
aa2cabb958 1) Converted v_vmdata to v_object.
2) Removed unnecessary vm_object_lookup()/pager_cache(object, TRUE) pairs
   after vnode_pager_alloc() calls - the object is already guaranteed to be
   persistent.
3) Removed some gratuitous casts.
1995-06-28 12:01:13 +00:00
Stefan Eßer
1d3c4bfc72 Corrections and additions to the PCI chip set configurations log.
Submitted by:	"Danny J. Zerkel" <dzerkel@feephi.phofarm.com>
1995-06-28 11:28:43 +00:00
David Greenman
9879652657 Fixed VOP_LINK argument order botch. 1995-06-28 07:06:55 +00:00
David Greenman
c5f944ee5a Fixed bug that was fixed in 1.28.2.1/1.29 a little differently; the
difference is more or less cosmetic.

Submitted by:	Matt Thomas
1995-06-28 05:46:19 +00:00
David Greenman
523a02aa7a Don't skip point-to-point interfaces if the netmask==0 (the netmask
should be completely ignored for point-to-point interfaces).
For point-to-point interfaces, route based on the destination address,
not the local address.

Submitted by:	Peter Wemm
1995-06-28 05:31:03 +00:00