consumers ignore the return value, soabort() is required to succeed,
and protocols produce errors here to report multiple freeing of the
pcb, which we hope to eliminate.
intended for use solely with atomic datagram socket types, and relies
on the previous break-out of sosend_copyin(). Changes to allow UDP to
optionally use this instead of sosend() will be committed as a
follow-up.
sosend(). Robert accidentally changed the snderr() macro to jump to the
out label which assumes the lock is already released rather than the
release label which drops the lock in his previous change to sosend().
This should fix the recent panics about returning from write(2) with the
socket lock held and the most recent LOR on current@.
chains and copying in mbufs from the body of the send logic, creating
a new function sosend_copyin(). This changes makes sosend() almost
readable, and will allow the same logic to be used by tailored socket
send routines.
MFC after: 1 month
Reviewed by: andre, glebius
Having an additional MT_HEADER mbuf type is superfluous and redundant
as nothing depends on it. It only adds a layer of confusion. The
distinction between header mbuf's and data mbuf's is solely done
through the m->m_flags M_PKTHDR flag.
Non-native code is not changed in this commit. For compatibility
MT_HEADER is mapped to MT_DATA.
Sponsored by: TCP/IP Optimization Fundraise 2005
following the protocol pru_listen() call to solisten_proto(), so
that it occurs under the socket lock acquisition that also sets
SO_ACCEPTCONN. This requires passing the new backlog parameter
to the protocol, which also allows the protocol to be aware of
changes in queue limit should it wish to do something about the
new queue limit. This continues a move towards the socket layer
acting as a library for the protocol.
Bump __FreeBSD_version due to a change in the in-kernel protocol
interface. This change has been tested with IPv4 and UNIX domain
sockets, but not other protocols.
and other applications to query the state of the stack regarding the
accept queue on a listen socket:
SO_LISTENQLIMIT Return the value of so_qlimit (socket backlog)
SO_LISTENQLEN Return the value of so_qlen (complete sockets)
SO_LISTENINCQLEN Return the value of so_incqlen (incomplete sockets)
Minor white space tweaks to existing socket options to make them
consistent.
Discussed with: andre
MFC after: 1 week
Make sure that there actually is a next packet before setting
nextrecord to that field.
PR: 83885
Submitted by: hirose@comm.yamaha.co.jp
Obtained from: Patch suggested in the PR
MFC after: 1 week
- Introducing the possibility of using locks different than mutexes
for the knlist locking. In order to do this, we add three arguments to
knlist_init() to specify the functions to use to lock, unlock and
check if the lock is owned. If these arguments are NULL, we assume
mtx_lock, mtx_unlock and mtx_owned, respectively.
- Using the vnode lock for the knlist locking, when doing kqueue operations
on a vnode. This way, we don't have to lock the vnode while holding a
mutex, in filt_vfsread.
Reviewed by: jmg
Approved by: re (scottl), scottl (mentor override)
Pointyhat to: ssouhlal
Will be happy: everyone
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
from uipc_socket.c to uipc_accf.c in do_getopt_accept_filter(), so that it
now matches do_setopt_accept_filter(). Slightly reformulate the logic to
match the optimistic allocation of storage for the argument in advance,
and slightly expand the coverage of the socket lock.
socket lock around knlist_init(), so don't.
Hard code the setting of the socket reference count to 1 rather than
using soref() to avoid asserting the socket lock, since we've not yet
exposed the socket to other threads.
This removes two mutex operations from each socket allocation.
a socket from a regular socket to a listening socket able to accept new
connections. As part of this state transition, solisten() calls into the
protocol to update protocol-layer state. There were several bugs in this
implementation that could result in a race wherein a TCP SYN received
in the interval between the protocol state transition and the shortly
following socket layer transition would result in a panic in the TCP code,
as the socket would be in the TCPS_LISTEN state, but the socket would not
have the SO_ACCEPTCONN flag set.
This change does the following:
- Pushes the socket state transition from the socket layer solisten() to
to socket "library" routines called from the protocol. This permits
the socket routines to be called while holding the protocol mutexes,
preventing a race exposing the incomplete socket state transition to TCP
after the TCP state transition has completed. The check for a socket
layer state transition is performed by solisten_proto_check(), and the
actual transition is performed by solisten_proto().
- Holds the socket lock for the duration of the socket state test and set,
and over the protocol layer state transition, which is now possible as
the socket lock is acquired by the protocol layer, rather than vice
versa. This prevents additional state related races in the socket
layer.
This permits the dual transition of socket layer and protocol layer state
to occur while holding locks for both layers, making the two changes
atomic with respect to one another. Similar changes are likely require
elsewhere in the socket/protocol code.
Reported by: Peter Holm <peter@holm.cc>
Review and fixes from: emax, Antoine Brodin <antoine.brodin@laposte.net>
Philosophical head nod: gnn
only call the protocol's pru_rcvd() if the protocol has the flag
PR_WANTRCVD set. This brings that instance of pru_rcvd() into line with
the rest, which do check the flag.
MFC after: 3 days
so->so_options when solisten() will succeed, rather than setting it
conditionally based on there not being queued sockets in the completed
socket queue. Otherwise, if the protocol exposes new sockets via the
completed queue before solisten() completes, the listen() system call
will succeed, but the socket and protocol state will be out of sync.
For TCP, this didn't happen in practice, as the TCP code will panic if
a new connection comes in after the tcpcb has been transitioned to a
listening state but the socket doesn't have SO_ACCEPTCONN set.
This is historical behavior resulting from bitrot since 4.3BSD, in which
that line of code was associated with the conditional NULL'ing of the
connection queue pointers (one-time initialization to be performed
during the transition to a listening socket), which are now initialized
separately.
Discussed with: fenner, gnn
MFC after: 3 days
short to unsigned short.
- Add SYSCTL_PROC() around somaxconn, not accepting values < 1 or > U_SHRTMAX.
Before this change setting somaxconn to smth above 32767 and calling
listen(fd, -1) lead to a socket, which doesn't accept connections at all.
Reviewed by: rwatson
Reported by: Igor Sysoev
up its pending error state, which may be set in some rare conditions resulting
in connect() syscall returning that bogus error and making application believe
that attempt to change association has failed, while it has not in fact.
There is sockets/reconnect regression test which excersises this bug.
MFC after: 2 weeks
substitute for a global mutex protecting the socket count and
generation number.
The observation that soreceive_rcvoob() can't return an mbuf
chain is a property, not a bug, so remove the XXXRW.
In sorflush, s/existing/previous/ for code when describing prior
behavior.
For SO_LINGER socket option retrieval, remove an XXXRW about why
we hold the mutex: this is correct and not dubious.
MFC after: 2 weeks
unnecessary use of a global variable and simplify the return case.
While here, use ()'s around return values.
In sodealloc(), remove a comment about why we bump the gencnt and
decrement the socket count separately. It doesn't add
substantially to the reading, and clutters the function.
MFC after: 2 weeks
to do a window update to the peer (thru an ACK) from soreceive()
itself. TCP will do that upon return from the socket callback.
Sending a window update from soreceive() results in a lock reversal.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Reviewed by: rwatson
soreceive(), then pass in M_DONTWAIT to m_copym(). Also fix up error
handling for the case where m_copym() returns failure.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Reviewed by: rwatson
or pru_attach is NULL. With loadable protocols the SPACER dummy protocols
have valid function pointers for all methods to functions returning just
EOPNOTSUPP. Thus the early abort check would not detect immediately that
attach is not supported for this protocol. Instead it would correctly
get the EOPNOTSUPP error later on when it calls the protocol specific
attach function.
Add testing against the pru_attach_notsupp() function pointer to the
early abort check as well.
(sorele()/sotryfree()):
- This permits the caller to acquire the accept mutex before the socket
mutex, avoiding sofree() having to drop the socket mutex and re-order,
which could lead to races permitting more than one thread to enter
sofree() after a socket is ready to be free'd.
- This also covers clearing of the so_pcb weak socket reference from
the protocol to the socket, preventing races in clearing and
evaluation of the reference such that sofree() might be called more
than once on the same socket.
This appears to close a race I was able to easily trigger by repeatedly
opening and resetting TCP connections to a host, in which the
tcp_close() code called as a result of the RST raced with the close()
of the accepted socket in the user process resulting in simultaneous
attempts to de-allocate the same socket. The new locking increases
the overhead for operations that may potentially free the socket, so we
will want to revise the synchronization strategy here as we normalize
the reference counting model for sockets. The use of the accept mutex
in freeing of sockets that are not listen sockets is primarily
motivated by the potential need to remove the socket from the
incomplete connection queue on its parent (listen) socket, so cleaning
up the reference model here may allow us to substantially weaken the
synchronization requirements.
RELENG_5_3 candidate.
MFC after: 3 days
Reviewed by: dwhite
Discussed with: gnn, dwhite, green
Reported by: Marc UBM Bocklet <ubm at u-boot-man dot de>
Reported by: Vlad <marchenko at gmail dot com>
Sockets in the listen queues have reference counts of 0, so if the
protocol decides to disconnect the pcb and try to free the socket, this
triggered a race with accept() wherein accept() would bump the reference
count before sofree() had removed the socket from the listen queues,
resulting in a panic in sofree() when it discovered it was freeing a
referenced socket. This might happen if a RST came in prior to accept()
on a TCP connection.
The fix is two-fold: to expand the coverage of the accept mutex earlier
in sofree() to prevent accept() from grabbing the socket after the "is it
really safe to free" tests, and to expand the logic of the "is it really
safe to free" tests to check that the refcount is still 0 (i.e., we
didn't race).
RELENG_5 candidate.
Much discussion with and work by: green
Reported by: Marc UBM Bocklet <ubm at u-boot-man dot de>
Reported by: Vlad <marchenko at gmail dot com>
state test as well as set, or we risk a race between a socket wakeup
and registering for select() or poll() on the socket. This does
increase the cost of the poll operation, but can probably be optimized
some in the future.
This appears to correct poll() "wedges" experienced with X11 on SMP
systems with highly interactive applications, and might affect a plethora
of other select() driven applications.
RELENG_5 candidate.
Problem reported by: Maxim Maximov <mcsi at mcsi dot pp dot ru>
Debugged with help of: dwhite
buffers with kqueue filters is no longer required: the kqueue framework
will guarantee that the mutex is held on entering the filter, either
due to a call from the socket code already holding the mutex, or by
explicitly acquiring it. This removes the last of the conditional
socket locking.
sockets are connection-oriented for the purposes of kqueue
registration. Since UDP sockets aren't connection-oriented, this
appeared to break a great many things, such as RPC-based
applications and services (i.e., NFS). Since jmg isn't around I'm
backing this out before too many more feet are shot, but intend to
investigate the right solution with him once he's available.
Apologies to: jmg
Discussed with: imp, scottl
