Get tests running with warnings. Fix warnings in headers and tests
This fixes a number of -Wunused-local-typedef warnings in libc++ headers.
MFC after: 3 days
Release 2015a - 2015-01-29
Changes affecting future time stamps
The Mexican state of Quintana Roo, represented by America/Cancun,
will shift from Central Time with DST to Eastern Time without DST
on 2015-02-01 at 02:00. (Thanks to Steffen Thorsen and Gwillim Law.)
Chile will not change clocks in April or thereafter; its new standard time
will be its old daylight saving time. This affects America/Santiago,
Pacific/Easter, and Antarctica/Palmer. (Thanks to Juan Correa.)
New leap second 2015-06-30 23:59:60 UTC as per IERS Bulletin C 49.
(Thanks to Tim Parenti.)
Changes affecting past time stamps
Iceland observed DST in 1919 and 1921, and its 1939 fallback
transition was Oct. 29, not Nov. 29. Remove incorrect data from
Shanks about time in Iceland between 1837 and 1908.
Some more zones have been turned into links, when they differed
from existing zones only for older time stamps. As usual,
these changes affect UTC offsets in pre-1970 time stamps only.
Their old contents have been moved to the 'backzone' file.
The affected zones are: Asia/Aden, Asia/Bahrain, Asia/Kuwait,
and Asia/Muscat.
Commit r279154 changed the API and ABI significantly, and {NZERO} is still
wrong.
Also, preserve errno on success instead of setting it to 0.
PR: 189821
Reported by: bde
Relnotes: yes
bfd_dwarf2_find_line() calls find_line() with NULL functionname_ptr,
which resulted in a crash on certain ELF objects.
This change was implemented independently from upstream binutils, but
I have checked that the crash does not happen there.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This can occur when DW_AT_specification is used to refer to another DIE
that provides the actual DW_AT_name string. For example:
< 3><0x00000086> DW_TAG_subprogram
DW_AT_name PrettyStackTraceEntry
...
< 1><0x00002cf4> DW_TAG_subprogram
DW_AT_specification <0x00000086>
We will need to add support for DW_AT_specification, but in the interim
we should not segfault.
Obtained from: Elftoolchain (r3170)
Sponsored by: The FreeBSD Foundation
The primary focus of these changes is to modernize FreeBSD's
tape infrastructure so that we can take advantage of some of the
features of modern tape drives and allow support for LTFS.
Significant changes and new features include:
o sa(4) driver status and parameter information is now exported via an
XML structure. This will allow for changes and improvements later
on that will not break userland applications. The old MTIOCGET
status ioctl remains, so applications using the existing interface
will not break.
o 'mt status' now reports drive-reported tape position information
as well as the previously available calculated tape position
information. These numbers will be different at times, because
the drive-reported block numbers are relative to BOP (Beginning
of Partition), but the block numbers calculated previously via
sa(4) (and still provided) are relative to the last filemark.
Both numbers are now provided. 'mt status' now also shows the
drive INQUIRY information, serial number and any position flags
(BOP, EOT, etc.) provided with the tape position information.
'mt status -v' adds information on the maximum possible I/O size,
and the underlying values used to calculate it.
o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed.
The extra devices were originally added as place holders for
density-specific device nodes. Some OSes (NetBSD, NetApp's OnTap
and Solaris) have had device nodes that, when you write to them,
will automatically select a given density for particular tape drives.
This is a convenient way of switching densities, but it was never
implemented in FreeBSD. Only the device nodes were there, and that
sometimes confused users.
For modern tape devices, the density is generally not selectable
(e.g. with LTO) or defaults to the highest availble density when
the tape is rewritten from BOT (e.g. TS11X0). So, for most users,
density selection won't be necessary. If they do need to select
the density, it is easy enough to use 'mt density' to change it.
o Protection information is now supported. This is either a
Reed-Solomon CRC or CRC32 that is included at the end of each block
read and written. On write, the tape drive verifies the CRC, and
on read, the tape drive provides a CRC for the userland application
to verify.
o New, extensible tape driver parameter get/set interface.
o Density reporting information. For drives that support it,
'mt getdensity' will show detailed information on what formats the
tape drive supports, and what formats the tape drive supports.
o Some mt(1) functionality moved into a new mt(3) library so that
external applications can reuse the code.
o The new mt(3) library includes helper routines to aid in parsing
the XML output of the sa(4) driver, and build a tree of driver
metadata.
o Support for the MTLOAD (load a tape in the drive) and MTWEOFI
(write filemark immediate) ioctls needed by IBM's LTFS
implementation.
o Improve device departure behavior for the sa(4) driver. The previous
implementation led to hangs when the device was open.
o This has been tested on the following types of drives:
IBM TS1150
IBM TS1140
IBM LTO-6
IBM LTO-5
HP LTO-2
Seagate DDS-4
Quantum DLT-4000
Exabyte 8505
Sony DDS-2
contrib/groff/tmac/doc-syms,
share/mk/bsd.libnames.mk,
lib/Makefile,
Add libmt.
lib/libmt/Makefile,
lib/libmt/mt.3,
lib/libmt/mtlib.c,
lib/libmt/mtlib.h,
New mt(3) library that contains functions moved from mt(1) and
new functions needed to interact with the updated sa(4) driver.
This includes XML parser helper functions that application writers
can use when writing code to query tape parameters.
rescue/rescue/Makefile:
Add -lmt to CRUNCH_LIBS.
src/share/man/man4/mtio.4
Clarify this man page a bit, and since it contains what is
essentially the mtio.h header file, add new ioctls and structure
definitions from mtio.h.
src/share/man/man4/sa.4
Update BUGS and maintainer section.
sys/cam/scsi/scsi_all.c,
sys/cam/scsi/scsi_all.h:
Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building
functions.
sys/cam/scsi/scsi_sa.c
sys/cam/scsi/scsi_sa.h
Many tape driver changes, largely outlined above.
Increase the sa(4) driver read/write timeout from 4 to 32
minutes. This is based on the recommended values for IBM LTO
5/6 drives. This may also avoid timeouts for other tape
hardware that can take a long time to do retries and error
recovery. Longer term, a better way to handle this is to ask
the drive for recommended timeout values using the REPORT
SUPPORTED OPCODES command. Modern IBM and Oracle tape drives
at least support that command, and it would allow for more
accurate timeout values.
Add XML status generation. This is done with a series of
macros to eliminate as much duplicate code as possible. The
new XML-based status values are reported through the new
MTIOCEXTGET ioctl.
Add XML driver parameter reporting, using the new MTIOCPARAMGET
ioctl.
Add a new driver parameter setting interface, using the new
MTIOCPARAMSET and MTIOCSETLIST ioctls.
Add a new MTIOCRBLIM ioctl to get block limits information.
Add CCB/CDB building routines scsi_locate_16, scsi_locate_10,
and scsi_read_position_10().
scsi_locate_10 implements the LOCATE command, as does the
existing scsi_set_position() command. It just supports
additional arguments and features. If/when we figure out a
good way to provide backward compatibility for older
applications using the old function API, we can just revamp
scsi_set_position(). The same goes for
scsi_read_position_10() and the existing scsi_read_position()
function.
Revamp sasetpos() to take the new mtlocate structure as an
argument. It now will use either scsi_locate_10() or
scsi_locate_16(), depending upon the arguments the user
supplies. As before, once we change position we don't have a
clear idea of what the current logical position of the tape
drive is.
For tape drives that support long form position data, we
read the current position and store that for later reporting
after changing the position. This should help applications
like Bacula speed tape access under FreeBSD once they are
modified to support the new ioctls.
Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all
drives that report SCSI-2 or older, as well as drives that
report an Illegal Request type error for READ POSITION with
the long format. So we should automatically detect drives
that don't support the long form and stop asking for it after
an initial try.
Add a partition number to the sa(4) softc.
Improve device departure handling. The previous implementation
led to hangs when the device was open.
If an application had the sa(4) driver open, and attempted to
close it after it went away, the cam_periph_release() call in
saclose() would cause the periph to get destroyed because that
was the last reference to it. Because destroy_dev() was
called from the sa(4) driver's cleanup routine (sacleanup()),
and would block waiting for the close to happen, a deadlock
would result.
So instead of calling destroy_dev() from the cleanup routine,
call destroy_dev_sched_cb() from saoninvalidate() and wait for
the callback.
Acquire a reference for devfs in saregister(), and release it
in the new sadevgonecb() routine when all devfs devices for
the particular sa(4) driver instance are gone.
Add a new function, sasetupdev(), to centralize setting
per-instance devfs device parameters instead of repeating the
code in saregister().
Add an open count to the softc, so we know how many
peripheral driver references are a result of open
sessions.
Add the D_TRACKCLOSE flag to the cdevsw flags so
that we get a 1:1 mapping of open to close calls
instead of a N:1 mapping.
This should be a no-op for everything except the
control device, since we don't allow more than one
open on non-control devices.
However, since we do allow multiple opens on the
control device, the combination of the open count
and the D_TRACKCLOSE flag should result in an
accurate peripheral driver reference count, and an
accurate open count.
The accurate open count allows us to release all
peripheral driver references that are the result
of open contexts once we get the callback from devfs.
sys/sys/mtio.h:
Add a number of new mt(4) ioctls and the requisite data
structures. None of the existing interfaces been removed
or changed.
This includes definitions for the following new ioctls:
MTIOCRBLIM /* get block limits */
MTIOCEXTLOCATE /* seek to position */
MTIOCEXTGET /* get tape status */
MTIOCPARAMGET /* get tape params */
MTIOCPARAMSET /* set tape params */
MTIOCSETLIST /* set N params */
usr.bin/mt/Makefile:
mt(1) now depends on libmt, libsbuf and libbsdxml.
usr.bin/mt/mt.1:
Document new mt(1) features and subcommands.
usr.bin/mt/mt.c:
Implement support for mt(1) subcommands that need to
use getopt(3) for their arguments.
Implement a new 'mt status' command to replace the old
'mt status' command. The old status command has been
renamed 'ostatus'.
The new status function uses the MTIOCEXTGET ioctl, and
therefore parses the XML data to determine drive status.
The -x argument to 'mt status' allows the user to dump out
the raw XML reported by the kernel.
The new status display is mostly the same as the old status
display, except that it doesn't print the redundant density
mode information, and it does print the current partition
number and position flags.
Add a new command, 'mt locate', that will supersede the
old 'mt setspos' and 'mt sethpos' commands. 'mt locate'
implements all of the functionality of the MTIOCEXTLOCATE
ioctl, and allows the user to change the logical position
of the tape drive in a number of ways. (Partition,
block number, file number, set mark number, end of data.)
The immediate bit and the explicit address bits are
implemented, but not documented in the man page.
Add a new 'mt weofi' command to use the new MTWEOFI ioctl.
This allows the user to ask the drive to write a filemark
without waiting around for the operation to complete.
Add a new 'mt getdensity' command that gets the XML-based
tape drive density report from the sa(4) driver and displays
it. This uses the SCSI REPORT DENSITY SUPPORT command
to get comprehensive information from the tape drive about
what formats it is able to read and write.
Add a new 'mt protect' command that allows getting and setting
tape drive protection information. The protection information
is a CRC tacked on to the end of every read/write from and to
the tape drive.
Sponsored by: Spectra Logic
MFC after: 1 month
LoopRotate: When reconstructing loop simplify form don't split edges
from indirectbrs.
Yet another chapter in the endless story. While this looks like we
leave the loop in a non-canonical state this replicates the logic in
LoopSimplify so it doesn't diverge from the canonical form in any way.
http://llvm.org/PR21968
This fixes a "Cannot split critical edge from IndirectBrInst" assertion
failure when building the devel/radare2 port.
PR: 195480, 196987
MFC after: 3 days
against rules. It definitely doesn't need to know about kernel internals,
such as 'struct ifaddr'. What it does with ifaddr, is that it only takes
ifa_addr member of it, and treats it as sockaddr, while it is only a pointer
to sockaddr. Fortunately, sizeof(struct ifaddr) > sizeof(struct sockaddr_in6),
so no problems arise.
Fix that declaring a private struct ifaddr in ipftest(1) and stop including
if_var.h.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
FreeBSD core files have no section table and thus LLDB's OS and vendor
detection logic does not work. If we encounter such an ELF file, update
an unknown OS to match the host.
This is not really the correct way to handle this, but more extensive
rework of ObjectFileELF will be needed and this change restores cross-
arch core debugging until that can be completed.
update paths; and include everything in the "base" distribution.
The "games" distribution being optional made sense when there were more
games and we had small disks; but the "games-like" games were moved into
the ports tree a dozen years ago and the remaining "utility-like" games
occupy less than 0.001% of my laptop's small hard drive. Meanwhile every
new user is confronted by the question "do you want games installed" when
they they try to install FreeBSD.
The next steps will be:
2. Removing punch card (bcd, ppt), phase-of-moon (pom), clock (grdc), and
caesar cipher (caesar, rot13) utilities. I intend to keep fortune, factor,
morse, number, primes, and random, since there is evidence that those are
still being used.
3. Merging src/games into src/usr.bin.
This change will not be MFCed.
Reviewed by: jmg
Discussed at: EuroBSDCon
Approved by: gjb (release-affecting changes)
Some architectures use .rel relocations (for debug data), so they must
be handled.
This was discovered from ctfconvert on ARM object files. The lack of
relocation handling caused all string lookups to return the string at
offset 0 in .debug_str, typically "FreeBSD clang version ..."
Reviewed by: gnn, imp, rpaulo (earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1819
order as the .init_array section. Finalisation routines need to be called
in the opposite order as their corresponding initialisation routines but
rtld(1) handles that by calling the function pointers in .fini_array in
reverse order.
Reviewed by: kib
MFC after: 2 weeks
This brings support for multi-threaded compression. This brings close
N times faster compression where N is the number of CPU cores.
Because of this, liblzma now depends on libthr.
Soon libarchive will be modified to use the new lzma API.
Thanks to antoine@ for the exp-run.
Differential Revision: https://reviews.freebsd.org/D1786
Reviewed by: bapt
There's an unfortunate layering issue between LLDB's Process/POSIX and
Process/{FreeBSD,Linux}, exposed by a refactoring in upstream revision
218568. Work around it by adding explicit #if defined(__FreeBSD__)
guards to include the correct header.
[mips] Enable arithmetic and binary operations for the i128 data type.
Summary:
This patch adds support for some operations that were missing from
128-bit integer types (add/sub/mul/sdiv/udiv... etc.). With these
changes we can support the __int128_t and __uint128_t data types
from C/C++.
Depends on D7125
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7143
This fixes "error in backend" messages, when compiling parts of
compiler-rt using 128-bit integer types for mips64.
Reported by: sbruno
PR: 197259
[FastIsel][X86] Fix invalid register replacement for bool args
Summary:
Consider the following IR:
%3 = load i8* undef
%4 = trunc i8 %3 to i1
%5 = call %jl_value_t.0* @foo(..., i1 %4, ...)
ret %jl_value_t.0* %5
Bools (that are the result of direct truncs) are lowered as whatever
the argument to the trunc was and a "and 1", causing the part of the
MBB responsible for this argument to look something like this:
%vreg8<def,tied1> = AND8ri %vreg7<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg8,%vreg7
Later, when the load is lowered, it will insert
%vreg15<def> = MOV8rm %vreg14, 1, %noreg, 0, %noreg; mem:LD1[undef] GR8:%vreg15 GR64:%vreg14
but remember to (at the end of isel) replace vreg7 by vreg15. Now for
the bug. In fast isel lowering, we mistakenly mark vreg8 as the result
of the load instead of the trunc. This adds a fixup to have
vreg8 replaced by whatever the result of the load is as well, so
we end up with
%vreg15<def,tied1> = AND8ri %vreg15<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg15
which is an SSA violation and causes problems later down the road.
This fixes PR21557.
Test Plan: Test test case from PR21557 is added to the test suite.
Reviewers: ributzka
Reviewed By: ributzka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6245
This fixes a possible assertion failure when compiling toolbox.cxx from
LibreOffice 4.3.5.
Reported by: kwm
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.
Reviewed by: imp (parts)
Requested by: imp (changing PCI location string)
Relnotes: yes
[X86] Convert esp-relative movs of function arguments to pushes, step 2
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
(Re-commit of r227728)
Differential Revision: http://reviews.llvm.org/D6789
This helps to get sys/boot/i386/boot2 below the required size again,
when optimizing with -Oz.
also because it is the wrong approach: comparing typeinfo names deeply
causes trouble if two loaded DSOs use independent types of the same
name.
In addition, this particular change was never merged to FreeBSD 10.x and
9.x, so let's get rid of it before it ends up in an 11.x release.
Discussed with: theraven, joerg@netbsd
Upstream fixes for issues found with afl (Issue #417).
- Fix length checking.
Check both the captured length and the on-the-wire length (the latter
*should* be greater than or equal to the former, but that's not
guaranteed).
Add some additional length checks, so neither caplen nor length
underflow.
If we stop dissecting because the packet is too short, return 1, not 0,
as we've "dissected" what we can; 0 means "this is LLC+SNAP with an OUI
of 0 and an unknown Ethertype".
commit: 743bcecdc92f88b118ec7aac4f68b606601205cc
- Clean up length checks.
Check only the amount of length that matters at any given point; yes,
this means we do multiple checks, but so it goes.
We don't need to check for LLC+SNAP - llc_print() does that for us. We
do, however, need to check to make sure we can safely skip the Fore
header.
commit: 5c65e7532fa16308e01299988852b0dc5b027559
Strip is often used to modify existing files, rather than creating new
files. If the existing file has hard links or is a symbolic link, act as
if editing the file in place and preserve the links.
Reported by: luigi
Reviewed by: imp, rpaulo
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1682
contrib/amd/hlfsd/homedir.c:497:8: error: address of array 'buf' will
always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if (!buf || buf[0] == '\0')
~^~~
In the affected function, 'buf' is declared as an array of char, so it
can never be null. Remove the unecessary check.
https://wiki.freebsd.org/ReproducibleBuilds
The contrib/sendmail change will be made in the upstream source for a
future sendmail release.
Reviewed by: des
MFC after: 3 days
Merge some cherry-picked fixes originating in OpenBSD
Check whether the version field is available before looking at it.
While we're at it, use ND_TCHECK(), rather than a hand-rolled check, to
check whether we have the full fixed-length portion of the IPv4 header.
commit c67afe913011138a2504ec4d3d423b48e73b12f3
Do more length checking. From OpenBSD.
commit d7516761f9c4877bcb05bb6543be3543e165249
Allows Clang to use LLVM's fixes-x18 option
This patch allows clang to have llvm reserve the x18
platform register on AArch64. FreeBSD will use this in the kernel for
per-cpu data but has no need to reserve this register in userland so
will need this flag to reserve it.
This uses llvm r226664 to allow this register to be reserved.
Patch by Andrew Turner.
Requested by: andrew
AArch64: add backend option to reserve x18 (platform register)
AAPCS64 says that it's up to the platform to specify whether x18 is
reserved, and a first step on that way is to add a flag controlling
it.
From: Andrew Turner <andrew@fubar.geek.nz>
Requested by: andrew
GDB: Replace use of sprintf.
2005-03-17 Mark Kettenis <kettenis@gnu.org>
* corelow.c (get_core_register_section): Replace usage of sprintf
and strcpy with xstrprintf and xstrdup.
Sourceware commit: 3ecda4574edb38ad12fb491ccaf6d9b0caa3a07a
CID: 1006819
MFC after: 4 days
triple ids
This only allows testing and does not change the defaults for mips/mips64.
They still build/use gcc by default.
Differential Revision: https://reviews.freebsd.org/D1190
Reviewed by: dim
Obtained from: https://github.com/Juniper/libxo
Requested by: Phil Shafer <phil@juniper.net>
Revisions 276253 & 276273 were incorporated into 0.2.0.
Revision 276260 has been merged-in.
- Eliminate race with liberal use of sleep(3) [1]
- Fix NetBSD-specific implementation way of testing result from pthread_cancel
by testing with `td` instead of `NULL` [2]
PR: 196738 [1]
PR: 191906 [2]
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
C++14 support[1], adds more C++1z features[2], and fixes the following
LWG issues[3]:
1450: Contradiction in regex_constants
2003: String exception inconsistency in erase.
2075: Progress guarantees, lock-free property, and scheduling
assumptions
2104: unique_lock move-assignment should not be noexcept
2112: User-defined classes that cannot be derived from
2132: std::function ambiguity
2135: Unclear requirement for exceptions thrown in
condition_variable::wait()
2142: packaged_task::operator() synchronization too broad?
2182: Container::[const_]reference types are misleadingly specified
2186: Incomplete action on async/launch::deferred
2188: Reverse iterator does not fully support targets that overload
operator&
2193: Default constructors for standard library containers are explicit
2205: Problematic postconditions of regex_match and regex_search
2213: Return value of std::regex_replace
2240: Probable misuse of term "function scope" in [thread.condition]
2252: Strong guarantee on vector::push_back() still broken with C++11?
2257: Simplify container requirements with the new algorithms
2258: a.erase(q1, q2) unable to directly return q2
2263: Comparing iterators and allocator pointers with different
const-character
2268: Setting a default argument in the declaration of a member
function assign of std::basic_string
2271: regex_traits::lookup_classname specification unclear
2272: quoted should use char_traits::eq for character comparison
2278: User-defined literals for Standard Library types
2280: begin / end for arrays should be constexpr and noexcept
2285: make_reverse_iterator
2288: Inconsistent requirements for shared mutexes
2291: std::hash is vulnerable to collision DoS attack
2293: Wrong facet used by num_put::do_put
2299: Effects of inaccessible key_compare::is_transparent type are not
clear
2301: Why is std::tie not constexpr?
2304: Complexity of count in unordered associative containers
2306: match_results::reference should be value_type&, not const
value_type&
2308: Clarify container destructor requirements w.r.t. std::array
2313: tuple_size should always derive from integral_constant<size_t, N>
2314: apply() should return decltype(auto) and use decay_t before
tuple_size
2315: weak_ptr should be movable
2316: weak_ptr::lock() should be atomic
2317: The type property queries should be UnaryTypeTraits returning
size_t
2320: select_on_container_copy_construction() takes allocators, not
containers
2322: Associative(initializer_list, stuff) constructors are
underspecified
2323: vector::resize(n, t)'s specification should be simplified
2324: Insert iterator constructors should use addressof()
2329: regex_match()/regex_search() with match_results should forbid
temporary strings
2330: regex("meow", regex::icase) is technically forbidden but should
be permitted
2332: regex_iterator/regex_token_iterator should forbid temporary
regexes
2339: Wording issue in nth_element
2341: Inconsistency between basic_ostream::seekp(pos) and
basic_ostream::seekp(off, dir)
2344: quoted()'s interaction with padding is unclear
2346: integral_constant's member functions should be marked noexcept
2350: min, max, and minmax should be constexpr
2356: Stability of erasure in unordered associative containers
2357: Remaining "Assignable" requirement
2359: How does regex_constants::nosubs affect basic_regex::mark_count()?
2360: reverse_iterator::operator*() is unimplementable
[1] http://libcxx.llvm.org/cxx1y_status.html
[2] http://libcxx.llvm.org/cxx1z_status.html
[3] http://www.open-std.org/jtc1/sc22/wg21/docs/lwg-defects.html
Exp-run: antoine
MFC after: 1 month
sanitizer sources. It is apparently unnecessary, and causes trouble for
people using WITHOUT_IPFILTER.
Reported by: Pawel Biernacki <pawel.biernacki@gmail.com>, Kurt Lidl <lidl@pix.net>
According to ELF ABI, alignment 0 and 1 has the same meaning: the
section has no alignment constraints.
PR: 196715
Sponsored by: The FreeBSD Foundation
- Fix depend target by removing a space after an "-I" inclusion option.
- Fix some minor compile issues in the "osmtest" utility.
MFC after: 3 days
PR: 196580
Sponsored by: Mellanox Technologies
[Aarch64] Customer lowering of CTPOP to SIMD should check for NEON
availability
This ensures llvm's AArch64 backend does not emit floating point
instructions if they are disabled.
Previously elftoolchain readelf(1) produced correct description text
only for Linux note types.
Upstream elftoolchain ticket #473
Differential Revision: https://reviews.freebsd.org/D1428
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
(or loading a dso linked to libthr.so into process which was not
linked against threading library).
- Remove libthr interposers of the libc functions, including
__error(). Instead, functions calls are indirected through the
interposing table, similar to how pthread stubs in libc are already
done. Libc by default points either to syscall trampolines or to
existing libc implementations. On libthr load, libthr rewrites the
pointers to the cancellable implementations already in libthr. The
interposition table is separate from pthreads stubs indirection
table to not pull pthreads stubs into static binaries.
- Postpone the malloc(3) internal mutexes initialization until libthr
is loaded. This avoids recursion between calloc(3) and static
pthread_mutex_t initialization.
- Reinstall signal handlers with wrapper on libthr load. The
_rtld_is_dlopened(3) is used to avoid useless calls to sigaction(2)
when libthr is statically referenced from the main binary.
In the process, fix openat(2), swapcontext(2) and setcontext(2)
interposing. The libc symbols were exported at different versions
than libthr interposers. Export both libc and libthr versions from
libc now, with default set to the higher version from libthr.
Remove unused and disconnected swapcontext(3) userspace implementation
from libc/gen.
No objections from: deischen
Tested by: pho, antoine (exp-run) (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Some files lack required #include <sys/stat.h>. The #ifdef is per ngie's
request; the includes are clearly necessary for struct stat.
The faccessat test fails because it tries to use AT_SYMLINK_NOFOLLOW with
faccessat(), which is not specified by POSIX.1-2008.
Differential Revision: https://reviews.freebsd.org/D1411
Reviewed by: ngie
In general 64-bit ELF notes use 4-byte padding, not 8, despite what is
claimed in various specs.
Upstream elftoolchain ticket 472
https://sourceforge.net/p/elftoolchain/tickets/472/
Sponsored by: The FreeBSD Foundation
To be able to info pages consider installing texinfo from ports print/texinfo or
via pkg: pkg install texinfo
Differential Revision: https://reviews.freebsd.org/D1409
Reviewed by: emaste, imp (previous version)
Relnotes: yes
Fix transformation of add with pc argument to adr for non-immediate
arguments.
This fixes an "Unimplemented" error when assembling certain ARM add
instructions with pc-relative arguments.
Reported by: sbruno
PR: 196412, 196423
job
The h_raw application doesn't do proper bounds checking without the option
being supplied via the build, which means that it doesn't throw signals and
fail as expected
PR: 196430
X-MFC with: r276479
Rename some internal templates to avoid conflict with complier
intrinsics. __is_constructible --> __libcpp_is_constructible,
__is_nothrow_constructible --> __libcpp_is_nothrow_constructible, and
__is_nothrow_assignable --> __libcpp_is_nothrow_assignable. No
functionality change.
Pull in r206805 from upstream libc++ trunk (by Marshall Clow):
Use compiler intrinsic __is_constructible if available
This should fix building parts of world with -std=c++11 enabled.
Reported by: Oliver Hartmann <ohartman@zedat.fu-berlin.de>
MFC after: 1 week
PR20228: don't retain a pointer to a vector element after the
container has been resized.
This fixes a possible crash when compiling certain parts of libc++'s
type_traits header.
The initial fix in r276374 is valid only for 64-bit objects. Revert it
and return an error in CHECK_EHDR if the multiplication would overflow.
The original buffer overflow issue was found with the security/afl
fuzzer and has upstream elftoolchain ticket 462. The 32-bit object issue
with r276374 found by antoine@ during an i386 exp-run.
Sponsored by: The FreeBSD Foundation
This fixes two strip(1) issues found during ports exp-run and adds a
string hash implementation which significantly speeds up certain
operations on objects with large numbers of symbols.
This also improves libdwarf handling for stripped objects with
.eh_frame or .debug_frame (but not other debug) sections.
PR: 196107
Sponsored by: The FreeBSD Foundation
Previously a corrupt ELF file could read beyond the end of e_rawfile.
Upstream elftoolchain ticket 462. Found via the security/afl fuzzer.
Sponsored by: The FreeBSD Foundation
Track r270303:
This provides a minor cleanup in elfdump; there are otherwise no
consumers in the tree. Old SUN documentation can be found for either
variant, but GNU binutils switched to DT_FEATURE around 2000.
Sponsored by: The FreeBSD Foundation
This includes a number of libdwarf improvements (particularly DWARF4
related) and updates to elftoolchain tools such as strip(1). It also
includes a large number of miscellaneous fixes (memory leaks, sign and
cast warnings, integer overflow and underflow, etc.).
This is a merge of r276167,276170-276172 from the
projects/elftoolchain-update-r3130 branch.
Sponsored by: The FreeBSD Foundation
PowerPC: CTR shouldn't fire if a TLS call is in the loop
Determining the address of a TLS variable results in a function call in
certain TLS models. This means that a simple ICmpInst might actually
result in invalidating the CTR register.
In such cases, do not attempt to rely on the CTR register for loop
optimization purposes.
This fixes PR22034.
Differential Revision: http://reviews.llvm.org/D6786
This fixes a "Invalid PPC CTR loop" error when compiling parts of libc
for PowerPC-32.
[PowerPC] Replace foul hackery with real calls to __tls_get_addr
My original support for the general dynamic and local dynamic TLS
models contained some fairly obtuse hacks to generate calls to
__tls_get_addr when lowering a TargetGlobalAddress. Rather than
generating real calls, special GET_TLS_ADDR nodes were used to wrap
the calls and only reveal them at assembly time. I attempted to
provide correct parameter and return values by chaining CopyToReg and
CopyFromReg nodes onto the GET_TLS_ADDR nodes, but this was also not
fully correct. Problems were seen with two back-to-back stores to TLS
variables, where the call sequences ended up overlapping with unhappy
results. Additionally, since these weren't real calls, the proper
register side effects of a call were not recorded, so clobbered values
were kept live across the calls.
The proper thing to do is to lower these into calls in the first
place. This is relatively straightforward; see the changes to
PPCTargetLowering::LowerGlobalTLSAddress() in PPCISelLowering.cpp.
The changes here are standard call lowering, except that we need to
track the fact that these calls will require a relocation. This is
done by adding a machine operand flag of MO_TLSLD or MO_TLSGD to the
TargetGlobalAddress operand that appears earlier in the sequence.
The calls to LowerCallTo() eventually find their way to
LowerCall_64SVR4() or LowerCall_32SVR4(), which call FinishCall(),
which calls PrepareCall(). In PrepareCall(), we detect the calls to
__tls_get_addr and immediately snag the TargetGlobalTLSAddress with
the annotated relocation information. This becomes an extra operand
on the call following the callee, which is expected for nodes of type
tlscall. We change the call opcode to CALL_TLS for this case. Back
in FinishCall(), we change it again to CALL_NOP_TLS for 64-bit only,
since we require a TOC-restore nop following the call for the 64-bit
ABIs.
During selection, patterns in PPCInstrInfo.td and PPCInstr64Bit.td
convert the CALL_TLS nodes into BL_TLS nodes, and convert the
CALL_NOP_TLS nodes into BL8_NOP_TLS nodes. This replaces the code
removed from PPCAsmPrinter.cpp, as the BL_TLS or BL8_NOP_TLS
nodes can now be emitted normally using their patterns and the
associated printTLSCall print method.
Finally, as a result of these changes, all references to get-tls-addr
in its various guises are no longer used, so they have been removed.
There are existing TLS tests to verify the changes haven't messed
anything up). I've added one new test that verifies that the problem
with the original code has been fixed.
This fixes a fatal "Bad machine code" error when compiling parts of
libgomp for 32-bit PowerPC.
partial_where points into the buffer that begins with buffer_start
so we need to use memmove() to handle the overlap.
Sourceware-PR 11456.
Obtained from: OpenBSD (CVS rev. 1.2)
MFC after: 3 days
Add parsing of 'foo@local".
Summary:
Currently, it supports generating, but not parsing, this expression.
Test added as well.
Test Plan: New test added, no regressions due to this.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6672
Pull in r224494 from upstream llvm trunk (by Justin Hibbits):
Add a corresponding '@LOCAL' parse to match r224415.
Pointed out by Jim Grosbach.
[PowerPC] Add JMP_SLOT relocation definitions
This will be required by upcoming patches for LLDB support.
Patch by Justin Hibbits!
Pull in r221510 from upstream llvm trunk (by Justin Hibbits):
Add Position-independent Code model Module API.
Summary:
This makes PIC levels a Module flag attribute, which can be queried by the
backend. The flag is named `PIC Level`, and can have a value of:
0 - Backend-default
1 - Small-model (-fpic)
2 - Large-model (-fPIC)
These match the `-pic-level' command line argument for clang, and the value of the
preprocessor macro `__PIC__'.
Test Plan:
New flags tests specific for the 'PIC Level' module flag.
Tests to be added as part of a future commit for PowerPC, which will use this new API.
Reviewers: rafael, echristo
Reviewed By: rafael, echristo
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D5882
Pull in r221791 from upstream llvm trunk (by Justin Hibbits):
Add support for small-model PIC for PowerPC.
Summary:
Large-model was added first. With the addition of support for multiple PIC
models in LLVM, now add small-model PIC for 32-bit PowerPC, SysV4 ABI. This
generates more optimal code, for shared libraries with less than about 16380
data objects.
Test Plan: Test cases added or updated
Reviewers: joerg, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, mcrosier, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D5399
Together, these changes implement small-model PIC support for PowerPC.
Thanks to Justin Hibbits and Roman Divacky for their assistance in
getting this working.
Instead of waiting until the addition of the first non-default entry.
This fixes a segfault when strip(1) is asked to remove every section from
an object file.
Upstream elftoolchain ticket 463
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1341
This will result in __ARM_ARCH_7A__ being defined during the compile.
When compiling with gcc, it will still only generate armv6 opcodes itself,
but should pass the arch to gas so that inline asm can use v7 opcodes.
Corresponds to 727fc41e077139570ea8b8ddfd6c546b2a55627c.
This allows us to use -no-integrated-as with clang, if we prefer.
Obtained from: binutils-gdb (Relicensed from Alan Modra as GPLv2)
MFC after: 2 weeks
X-MFC-with: r275718
When requested to strip specific symbols (-N flag) the default should be
to strip nothing (other than the requested symbols). This is consistent
with binutils strip(1).
PR: 196038
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1327
Calculate the segment's memory size (p_memsz) using the virtual
addresses, not the file offsets. Otherwise padding preceeding SHT_NOBITS
sections may be excluded from the calculation, resulting in a segment
that is too small.
PR: 195653
Sponsored by: The FreeBSD Foundation
