89446 Commits

Author SHA1 Message Date
tijl
8396cde5cc Clean up x86 endian.h:
- Remove extern "C". There are no functions with external linkage here. [1]
- Rename bswapNN_const(x) to bswapNN_gen(x) to indicate that these macros
  are generic implementations that can take non-constant arguments. [1]
- Split up __GNUCLIKE_ASM && __GNUCLIKE_BUILTIN_CONSTANT_P and deal with
  each separately.
- Replace _LP64 with __amd64__ because asm instructions are machine
  dependent, not ABI dependent.

Submitted by:	bde [1]
Reviewed by:	bde
2012-03-09 11:48:56 +00:00
jmallett
c6a692183a "Did you still want the not yet? I think we just arrived at yet."
Submitted by:	thompsa
2012-03-09 09:32:20 +00:00
adrian
59c041e360 Insert extra paranoia into the ath(4) driver.
This function must be called with both the source and destination TXQs
locked or things will get hairy.

I added this as part of some debugging in a PR but it turned out to not
be the cause.  I still think it's -correct- so, here it is.
2012-03-09 08:36:30 +00:00
jmallett
30d1032111 Enable COMPAT_FREEBSD32 for the Octeon kernel config by default. 2012-03-09 07:53:44 +00:00
mav
fb50c869a4 Be more polite when setting state->nextevent inside cpu_new_callout().
Hardclock is not the only who wakes idle CPU since kdtrace cyclic addition.

MFC after:	2 weeks
2012-03-09 07:30:48 +00:00
kib
5abd2bb7cb Decomission mnt_noasync. Introduce MNTK_NOASYNC mnt_kern_flag which
allows a filesystem to request VFS to not allow MNTK_ASYNC.

MFC after:	1 week
2012-03-09 00:12:05 +00:00
adrian
f9172f43af Correctly initialise the TXQ link pointer to the last descriptor in
the last buffer in the list.

The current behaviour (due to me, so pointy hat is firmly on my head here)
was incorrect - it was setting the link pointer to the last descriptor
of the _first_ buffer in the TXQ.  Instead, it should have set it to the
last descriptor in the _last_ buffer in the TXQ.

This showed up as occasional TX stalls with frames in the TXQ but no
TX progress being made.  Further inspection showed the TXQ looked like
it contained multiple "lists" of frames - there'd be a list of correct
frames, then a NULL link pointer, but there'd be a next buffer in the
list.

Since this code is only called upon an interface reset, it's likely
this only began showing up when I started doing stress testing
in environments which annoy the radios enough to cause lockups.

I've not yet any TX stalls with this patch applied.

PR:		kern/165866
2012-03-08 23:53:38 +00:00
adrian
c7c5399057 Add missing \n's.
This showed up when testing the wtap module, as it attaches with
no radiotap tx/rx configuration.
2012-03-08 23:46:42 +00:00
kan
4ea9702d06 Save more of config space for PCI Express and PCI-X devices.
Expand pci_save_state and pci_restore_state to save more of
the config state for PCI Express and PCI-X devices. Various
writable control registers are present in PCI Express that
can potentially be lost over suspend/resume cycle.

This change is modeled after similar functionality in Linux.

Reviewed by: wlosh,jhb
MFC after:  1 month
2012-03-08 21:09:34 +00:00
pfg
f8fecfb833 Add support for ns timestamps and birthtime to the ext2/3 driver.
When using big inodes there is sufficient space in ext3 to
keep extra resolution and birthtime (creation) timestamps.
The appropriate fields in the on-disk inode have been approved
for a long time but support for this in ext3 has not been
widely  distributed.

In preparation for ext4 most linux distributions have enabled
by default such bigger inodes and some people use nanosecond
timestamps in ext3. We now support those when the inode is big
enough and while we do recognize the EXT4F_ROCOMPAT_EXTRA_ISIZE,
we maintain the extra timestamps even when they are not used.

An additional note by Bruce Evans:
We blindly accept unrepresentable tv_nsec in VOP_SETATTR(), but
all file  systems have always done that.  When POSIX gets around
to  specifying the behaviour, it will probably require certain
rounding to the fs's resolution and not rejecting the request.
This unfortunately means that syscalls that set times can't
really tell if they succeeded without reading back the times
using stat() or similar and checking that they were set close
enough.

Reviewed by:	bde
Approved by:	jhb (mentor)
MFC after:	2 weeks
2012-03-08 21:06:05 +00:00
pho
81cae127b0 Free up allocated memory used by posix_fadvise(2). 2012-03-08 20:34:13 +00:00
jhb
19feaba08b Add KTR_VFS traces to track modifications to a vnode's writecount. 2012-03-08 20:27:20 +00:00
jhb
4fea355eb2 Add a new sched_clear_name() method to the scheduler interface to clear
the cached name used for KTR_SCHED traces when a thread's name changes.
This way KTR_SCHED traces (and thus schedgraph) will notice when a thread's
name changes, most commonly via execve().

MFC after:	2 weeks
2012-03-08 19:41:05 +00:00
pho
ab94e09909 syscall() fuzzing can trigger this panic. Return EINVAL instead.
MFC after:	1 week
2012-03-08 12:49:08 +00:00
glebius
d8060072d1 Merge from OpenBSD:
revision 1.146
  date: 2010/05/12 08:11:11;  author: claudio;  state: Exp;  lines: +2 -3
  bzero() the full compressed update struct before setting the values.
  This is needed because pf_state_peer_hton() skips some fields in certain
  situations which could result in garbage beeing sent to the other peer.
  This seems to fix the pfsync storms seen by stephan@ and so dlg owes me
  a whiskey.

I didn't see any storms, but this definitely fixes a useless memory
allocation on the receiving side, due to non zero scrub_flags field
in a pfsync_state_peer structure.
2012-03-08 09:20:00 +00:00
hselasky
fd7603d60b Add new USB device IDs.
PR:		usb/165815
MFC after:	1 week
2012-03-08 07:22:41 +00:00
emaste
459dac9ae1 Remove unactionable message about label geometry
It's not clear to a user what they should do after seeing the "geometry
does not match label" kernel message, and it does not appear to present
a problem in practice.  Thus, just remove the messages.

Approved by:	marcel
2012-03-08 01:48:44 +00:00
ken
4b86692e31 Make the mps(4) module depend on the cam module.
Submitted by:	Mykola Dzham <i@levsha.me>
MFC after:	3 days
2012-03-07 22:39:11 +00:00
jhb
514b775731 Remove the PAE-specific 2GB DMA boundary since HEAD now supports a proper 4G
boundary for PAE.
2012-03-07 18:57:09 +00:00
jhb
81b5da5e88 Use bus_get_dma_tag() to inherit the 4G boundary restriction from the
parent PCI bus and remove the home-grown version in this driver.
2012-03-07 18:53:56 +00:00
jhb
19f7abda8b Use bus_get_dma_tag() to inherit the PCI bus' 4G boundary constraint.
Tested by:	emaste
2012-03-07 18:52:46 +00:00
jhb
8696e15fa7 Simplify the PCI bus dma tag code a bit. First, don't create a tag at
all for platforms that only have 32-bit bus addresses.  Second, remove
the 'tag_valid' flag from the softc.  Instead, if we don't create a
tag in pci_attach_common(), just cache the value of our parent's tag
so that we always have a valid tag to return.
2012-03-07 18:50:33 +00:00
kib
9d4d411642 The pipe_poll() performs lockless access to the vnode to test
fifo_iseof() condition, allowing the v_fifoinfo to be reset and freed
by fifo_cleanup().

Precalculate EOF at the places were fo_wgen is changed, and cache the
state in a new pipe state flag PIPE_SAMEWGEN.

Reported and tested by:	bf
Submitted by:	gianni
MFC after:	1 week (a backport)
2012-03-07 07:31:50 +00:00
thompsa
1ead29e715 Move the vlan buffer space into the union which also fixes an unused variable
warning with !INET & !INET6.

Spotted by:	pluknet
2012-03-07 07:22:53 +00:00
remko
44297709fc Add support for the MosChip MCS9904 four serial ports
controller.

PR:		165804
Submitted by:	Eugene Grosbein
MFC after:	1 week
2012-03-07 06:42:21 +00:00
jmallett
50adfd4abe Get rid of duplicated versions of the KSU bits. 2012-03-06 23:08:02 +00:00
thompsa
b1fbb40a93 Add the ability to set which packet layers are used for the load balance hash
calculation.
2012-03-06 22:58:13 +00:00
ray
10e68a3224 Break long lines.
Approved by:	adri (mentor)
2012-03-06 22:45:54 +00:00
ray
9d353b86a5 Remove EoL whitespaces.
Approved by:	adri (mentor)
2012-03-06 22:16:10 +00:00
adrian
2960bf1153 Modify HWMP to be able to allocate memory for PREQ/PREP/PERR for all scenarios.
* Added verify_mesh_*_len functions that verify the length
  according to the amendment spec and return number of destination addresses
  for allocation of appropriate struct size in memory;
* Modified hwmp_recv_action_meshpath to allocate HWMP ie instead of
  storing them on the stack and store all available field according the flags;
* Modify hwmp_add_mesh* to work with all cases of HWMP according to amendment.
* Modify hwmp_send_* to calculate correct len of bytes for the HWMP ie.
* Added new M_80211_MESH_* malloc defines.
* Added macros with magic numbers for HWMP ie sizes according to amendment.
* Added the external address to all HWMP ie structs.

Submitted by:	monthadar@gmail.com
2012-03-06 21:20:16 +00:00
jhb
13aacec1f8 Add a note to clarify why we create a relocated copy of boot1 in lower
memory.
2012-03-06 20:45:13 +00:00
jmallett
62cc1e85ff Remove unused file. 2012-03-06 20:23:29 +00:00
attilio
9906b913d9 Disable the option VFS_ALLOW_NONMPSAFE by default on all the supported
platforms.
This will make every attempt to mount a non-mpsafe filesystem to the
kernel forbidden, unless it is expressely compiled with
VFS_ALLOW_NONMPSAFE option.

This patch is part of the effort of killing non-MPSAFE filesystems
from the tree.

No MFC is expected for this patch.
2012-03-06 20:01:25 +00:00
jmallett
ac880fa7c8 At the risk of reducing source compatibility with old NetBSD and Sprite:
o) Get rid of some unused macros related to features we don't intend to
   provide.
o) Get rid of macro definitions for MIPS-I CPUs.  We are not likely to
   support anything that predartes MIPS-III.
o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being
   used already.
o) Eliminate a duplicate and mostly-unused set of exception vector macros.

There's still considerable duplication and lots more obsolete in our headers,
but this reduces one of the larger files to a size where one could reckon
about the correctness of its contents with a mere few hours of contemplation.

There is, of course, a question of whether we need definitions for fields,
registers and configurations that we are unlikely to ever use or implement,
even if they're not obsolete since 1991.  FreeBSD is not a processor
reference manual, and things that aren't used may be wrong, or may be
duplicated because nobody could possibly actually know whether they're
already defined.
2012-03-06 19:01:32 +00:00
bz
606ca3f4b7 Provide wbwd(4), a driver for the watchdog timer found on various
Winbond Super I/O chips.

With minor efforts it should be possible the extend the driver to support
further chips/revisions available from Winbond.  In the simplest case
only new IDs need to be added, while different chipsets might require
their own function to enter extended function mode, etc.

Sponsored by:	Sandvine Incorporated ULC (in 2011)
Reviewed by:	emaste, brueffer
MFC after:	2 weeks
2012-03-06 18:44:52 +00:00
gnn
6ce0b47b5a Properly mask off bits that are not supported in the IAP counters.
This fixes a bug where users would see massively large counts, near
to 2**64 -1, due to the bits not being cleared.

MFC after:	3 weeks
2012-03-06 17:17:03 +00:00
trasz
1d720144fd Add LUN resizing to CTL. Also make it possible to explicitly set
size when creating file-backed or device-backed LUN.

Reviewed by:	ken (earlier version)
Sponsored by:	The FreeBSD Foundation
2012-03-06 13:43:57 +00:00
trasz
613d36617d Make racct and rctl correctly handle jail renaming. Previously
they would continue using old name, the one jail was created with.

PR:		bin/165207
2012-03-06 11:05:50 +00:00
jmallett
2f6de1517f Garbage collect some unused symbols. 2012-03-06 08:40:21 +00:00
jmallett
a0eb1ecb3c Make the native sigreturn just wrap set_mcontext, much as freebsd32_sigreturn
does.
2012-03-06 08:10:48 +00:00
jmallett
efb612d7ca Store TLS base in the sigframe just as is done in freebsd32_sendsig. Because
the native sigreturn doesn't use set_mcontext like the COMPAT_FREEBSD32 version
does, this wouldn't actually result in overwriting the TLS base.  Probably it
makes sense to restructure the native sigreturn to use set_mcontext for
consistency, and to allow sigreturn to change the TLS base.
2012-03-06 08:02:10 +00:00
jmallett
a14b2938a8 Fix two and a half oversights in COMPAT_FREEBSD32 related to contexts and
TLS:
o) The mc_tls field used to store the TLS base when doing context gets and
   restores was left a pointer and not converted to a 32-bit integer.  This
   had the bug of not correctly capturing the TLS value desired by the user,
   and the extra nastiness of making the structure the wrong size.
o) The mc_tls field was not being saved by sendsig.  As a result, the TLS base
   would always be set to NULL when restoring from a signal handler.

Thanks to gonzo for helping track down a bunch of other TLS bugs that came out
of tracking these down.
2012-03-06 07:50:45 +00:00
jmallett
00f892cca7 When emulating rdhwr for TLS, use the 32-bit offset under COMPAT_FREEBSD32. 2012-03-06 07:47:28 +00:00
gonzo
c6be4f4d2d Prepare for large TLS redo. Save pointer to the beginning of TLS area,
and offset it only if requested by RDHWR handler. Otherwise things
    get overly complicated - we need to track whether address passsed in
    request for setting td_md.md_tls is already offseted or not.
2012-03-06 03:25:50 +00:00
jmallett
9334d7f25f In the trap messages that aid the primitive debugging environment of MIPS,
include the tid as well, so it's easier to tell which thread of a process
with multiple is responsible for a crash.
2012-03-06 02:23:15 +00:00
jhb
288d581e55 Fix boot2 to handle boot config files that only contain a custom path to
a loader or kernel.  Specifically, kname cannot be pointed at cmd[] since
it's value is change to be an empty string after the initial call to
parse, and cmd[]'s value can be changed (thus losing a prior setting for
kname) due to user input at the boot prompt.  While here, ensure that that
initial boot config file text is nul-terminated, that ops is initialized
to zero, and that kname is always initialized to a valid string.

Tested by:	Domagoj Smolcic  rank1seeker of gmail
MFC after:	1 week
2012-03-05 19:53:17 +00:00
jkim
2aa0082431 Fix few style nits. 2012-03-05 18:47:42 +00:00
ivoras
5fe0ebe46a Print out process name and thread id in the debugging message.
This is useful because the message can end up in system logs in
non-debugging operation.

Reviewed by:	attilio (earlier version)
2012-03-05 14:19:43 +00:00
kib
91747da5db Apply inlined vn_vget_ino() algorithm for ".." lookup in pseudofs.
Reported and tested by:	pho
MFC after:	2 weeks
2012-03-05 11:38:02 +00:00
hselasky
6c6bfc82fe Add DWC OTG module to ARM builds.
MFC after:	1 week
2012-03-05 06:46:35 +00:00