Mark iscontrol(8) and iscsi_initiator(4) obsolete.
Differential Revision: https://reviews.freebsd.org/D931
Reviewed by: wblock@
Sponsored by: The FreeBSD Foundation
The default for UDPLITE_RECV_CSCOV is zero. RFC 3828 recommend
that this means full checksum coverage for received packets.
If an application is willing to accept packets with partial
coverage, it is expected to use the socket option and provide
the minimum coverage it accepts.
This was intended to have been merged along with r256752. This commit
contains the altera_atse.4 portions of r256752, r257656, and r270268.
Approved by: re (gjb)
Sponsored by: DARPA/AFRL
Improve markup and language throughout the ctl.conf man page
MFC r271543:
Add the new iscsi(4) man page
Cross reference it from iscsid(8) and iscsictl(8)
Approved by: re (gjb), bcr (mentor)
MFC r270653: Update man-pages to correctly refer to changed pathes and namin
MFC r270657: More man pages that need to know about vt in addition to syscon
MFC r270659: (by pluknet@) Missed comma.
MFC r270660: Back-out the references to vt(4) from this man-page. It appears
MFC r270933: Add references to vt(4) to further man-pages.
MFC r270934: Final patches to the tools used to convert syscons keymaps for
MFC r270935: Add vt(4) support to the console initialisation script, specifi
Second batch of MFCs to add support for Unicode keymaps for use with vt(4).
It contains the following changes:
- Add references to vt(4) to relevant man-pages.
- Update comment in defaults/rc.conf to mention vt
- Update rc.d/syscons to warn about syscons keymaps used under vt.
An attempt is made to identify the vt keymap to load instead.
- Minor changes to the conversion tool based on mail comments on keymaps.
Relnotes: yes
Add a tunable "hw.mfi.mrsas_enable" to allow mfi(4) to drop priority and
allow mrsas(4) from LSI to attach to newer LSI cards that are support by
mrsas(4). If mrsas(4) is not loaded into the system at boot then mfi(4)
will always attach. If a modified mrsas(4) is loaded in the system. That
modification is return "-30" in it's probe since that is between
BUS_PROBE_DEFAULT and BUS_PROBE_LOW_PRIORITY.
This option is controller by a new probe flag "MFI_FLAGS_MRSAS" in mfi_ident
that denotes cards that should work with mrsas(4). New entries that should
have this option.
This is the first step to get mrsas(4) checked into FreeBSD and to avoid
collision with people that use mrsas(4) from LSI. Since mfi(4) takes
priority, then mrsas(4) users need to rebuild GENERIC. Using the
.disabled="1" method doesn't work since that blocks attaching and the
probe gave it to mfi(4).
MFC r267451 (by delphij):
Correct variable for loader tunable variable hw.mfi.mrsas_enable.
FreeBSD, historically, has always used 8-bit addresses for i2c devices
(7-bit device address << 1), always leaving the room for the read/write
bit.
This commit convert ti_i2c and revert r259127 on bcm2835_bsc to make them
compatible with 8-bit addresses. Previous to this commit an i2c device
would have different addresses depending on the controller it was attached
to (by example, when compared to any iicbb(4) based i2c controller), which
was a pretty annoying behavior.
Also, update the PMIC i2c address on beaglebone* DTS files to match the
new address scheme.
Now the userland utilities need to do the correct slave address shifting
(but it is going to work with any i2c controller on the system).
Discussed with: ian
MFC r267834:
Clarify the expected usage of I2C 7-bit slave addresses on ioctl(2)
interface.
While here add the cross reference to iic(4) on iicbus(4).
CR: D210
Suggested by: jmg
Configure the analog input 7 which, on BBB, is connected to the 3V3B rail
through a voltage divisor (R163 and R164 on page 4 of BBB schematic).
Add a note about this on ti_adc(4) man page. The ti_adc(4) man page will
first appear on 10.1-RELEASE.
Suggested by: Sulev-Madis Silber (ketas)
Manual page reviewed by: brueffer (D127)
Merge if_nf10bmac(4), a driver to support an NetFPGA-10G Embedded
CPU Ethernet Core.
The current version operates on a simple PIO based interface connected
to a NetFPGA-10G port.
To avoid confusion: this driver operates on a CPU running on the FPGA,
e.g. BERI/mips, and is not suited for the PCI host interface.
Adjust the register layout to allow for 64bit registers in the
future for nf10bmac(4). Also, add support for and enable RX interrupts.
Allow switching between 32bit and 64bit bus width data access at compile
time by setting NF10BMAC_64BIT and using a REGWTYPE #define to set correct
variable and return value widths.
Adjust comments to indicate the 32 or 64bit register widths.
Relnotes: yes
Sponsored by: DARPA/AFRL
- Add a very simple virtio_random(4) driver for FreeBSD guests to harvest
entropy from hypervisors.
- Add support to bhyve for the virtio RNG entropy-source device to provide
entry to bhyve guests.
Improve markup, change references to nonexistent vt_vga(4), remove some
language redundancy, and move the examples so sections are in the
standard order.
Rename vt(4) vga module to dismiss interference with syscons(4) vga module.
267623 Log:
Remove stale link to deleted vt(4) xboxfb driver.
267624 Log:
syscons(4) and vt(4) can be built together now.
267625 Log:
Allow to disable syscons(4) if "hw.syscons.disable" kenv is set.
267626 Log:
Suspend vt(4) initialization if "kern.vt.disable" kenv is set.
267965 by emaste@ Log:
Use a common tunable to choose between vt(4)/sc(4)
With this change and previous work from ray@ it will be possible to put
both in GENERIC, and have one enabled by default, but allow the other to
be selected via the loader.
(The previous implementation had separate kern.vt.disable and
hw.syscons.disable tunables, and would panic if both drivers were
compiled in and neither was explicitly disabled.)
268175 by emaste@ Log:
Fix vt(4) detection in kbdcontrol and vidcontrol
As sc(4) and vt(4) coexist and are both enabled in GENERIC, the existence
of a vt(4) sysctl is not sufficient to determine that vt(4) is in use.
Reported by: Trond Endrestøl
268045 by emaste@ Log:
Add vt(4) to GENERIC and retire the separate VT config
vt(4) and sc(4) can now coexist in the same kernel. To choose the vt
driver, set the loader tunable kern.vty=vt .
Sponsored by: The FreeBSD Foundation
Add the possibility to specify ecx when performing cpuid calls.
MFC r267673:
Restore the ABI of the cpuctl(4) ioctl request CPUCTL_CPUID.
MFC r267814:
Make cpuctl_do_cpuid() and cpuctl_do_cpuid_count() return void.
In order to get vt(4) a bit closer to the feature set provided by sc(4),
implement options TERMINAL_{KERN,NORM}_ATTR. These are aliased to
SC_{KERNEL_CONS,NORM}_ATTR and like these latter, allow to change the
default colors of normal and kernel text respectively.
Note on the naming: Although affecting the output of vt(4), technically
kern/subr_terminal.c is primarily concerned with changing default colors
so it would be inconsistent to term these options VT_{KERN,NORM}_ATTR.
Actually, if the architecture and abstraction of terminal+teken+vt would
be perfect, dev/vt/* wouldn't be touched by this commit at all.
Reviewed by: emaste
Sponsored by: Bally Wulff Games & Entertainment GmbH
- SC_NO_SYSMOUSE isn't currently supported by vt(4), so nuke it from vt.4.
- vt_vga(4) is a driver rather than a function so reference it accordingly.
- Uncomment HISTORY section given that vt(4) will first appear in 9.3.
Reviewed by: emaste (modulo last part)
Sponsored by: Bally Wulff Games & Entertainment GmbH
Change examples to have master skew above 0 to have ability to overwrite this
from the slave (for example, when master is failing on disk IO and could not be
logged into or execute cronjob).
Commented out examples changed too to simplify future merging.
Idea by: kaa@zvuki.ru
Discussed with: glebius
- Add preliminary support for the Realtek RTL8188EUS and RTL8188ETV chipsets.
- Add device ID for 'Sanoxy 802.11N' USB
- Initialize rssi variable.
- Fix gcc build, initialize off variable.
- The DELAY() should not be used in USB drivers.
- The usb_pause_mtx() function takes ticks and not milliseconds as last argument.
USB endpoints are almost always single-digits, fix the path in the man
page to be clearer.
PR: docs/175560
Submitted by: Andreas Gustafsson <gson gson.org>
The ADC has a 12bit resolution and its raw output can be read via sysctl(8)
interface.
The driver allows the setup of ADC clock, samples average and open delay
(the number of clock cycles to wait before start the conversion).
The TSC_ADC module is set in the general purpose mode (no touchscreen
support).
Tested on Beaglebone-black.
Written based on AM335x TRM.
r265194, r265197
r260522:
Add the manual page for geom_uncompress(4).
r260523:
Build the geom_uncompress(4) module by default.
Fix geom_uncompress(4) module loading. Don't link zlib.c (which is a module
itself) directly.
r261439:
Remove some unnecessary code. The offsets read from the first block are
overwritten a few lines bellow.
r261440:
Fix a logic error. Because of this inflateReset() wasn't being called and
the output buffer wasn't being cleared between the inflate() calls,
producing zeroed output after the first inflate() call.
This fixes the read of mkuzip(8) images with geom_uncompress(4).
r261586:
Fix the build with DEBUG enabled. Where possible, fix style(9) issues.
r264504:
Make sure not to do I/O for more than MAXPHYS bytes. Doing so can cause
problems in our providers, such as a KASSERT in md(4). We can initiate
I/O for more than MAXPHYS bytes if we've been given a BIO for MAXPHYS
bytes, the blocks from which we're reading couldn't be compressed and
we had compression in preceeding blocks resulting in misalignment of
the blocks we're trying to read relative to the sector. We're forced to
round up the I/O length to make it an multiple of the sector size.
When we detect the condition, we'll reduce the block count and perform
a "short" read. In g_uzip_done() we need to consider the original I/O
length and stop early if we're about to deflate a block that we didn't
read. By using bio_completed in the cloned BIO and not bio_length to
check for this, we automatically and gracefully handle short reads that
our providers may be doing on top of the short reads we may initiate
ourselves.
r264769:
Keep geom_uncompress(4) in line with geom_uzip(4), bring in the r264504 fix.
Make sure not to start I/O bigger than MAXPHYS bytes.
r265193:
Some style and whitespace fixes. Reduce the difference between geom_uzip(4)
and geom_uncompress(4). Now, they produce an almost clean diff(1) output.
Remove a duplicated variable from g_uncompress.c and an unnecessary header
from g_uzip.c.
r265194:
Actually the FEATURE() macro is defined on sys/sysctl.h.
r265197:
Fix a leak in g_uzip_taste(). After retrieve all the block offsets from
the uzip image, free the last data read.
r261844, r261845, r261846, r262194, r262522, r262559
r258046:
Fix a typo on a comment in ofw_bus_if.m, the default method will return -1
when a node doesn't exist.
r258047:
Move the KASSERT() check to the point before the increase of number of pins.
r258050:
Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so
it can be overriden by its OFW/FDT version.
Give a chance for GPIO devices that implement the device_identify method to
attach.
r259035:
Remove unnecessary includes and an unused softc variable. While here apply
two minor style(9) fixes.
r259036:
Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4)
control callback function. This makes gpioled(4) works even if the pin
is accidentally set to an input.
r259037:
Fix the pin value reading on AM335x. Because of the inverted logic it was
always returning '0' for all the reads, even for the outputs. It is now
known to work with gpioiic(4) and gpioled(4).
r261842:
Add an OFW GPIO compatible bus. This allows the use of the DTS files to
describe GPIO bindings in the system.
Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between
the OFW and the non OFW versions of GPIO bus.
Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus.
r261843:
Add OFW support to the in tree gpio compatible devices: gpioiic(4) and
gpioled(4).
Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for
the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx)
used as reference for a non OFW-based system.
Update the gpioled(4) and gpioiic(4) man pages with some details and
examples about the FDT/OFW support.
Some compatibility details pointed out by imp@ will follow in subsequent
commits.
r261844:
Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems.
This change makes ofw_iicbus attach to iicbb(4) controllers in addition to
the already supported i2c host bridges (iichb).
On iicbb(4) allow the direct access of the OFW parent node by its children,
so they can be directly attached to iicbb(4) node on the DTS without the
need of describing the i2c bus.
r261845:
Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this
change the gpio children can be described as directly connected to the GPIO
controller without the need of describing the OFW GPIO bus itself on the
DTS file.
With this commit the OFW GPIO bus is fully functional on BBB and RPi.
GPIO controllers which want to use the OFW GPIO bus will need similar
changes.
r261846:
Make the gpioled(4) work out of the box on BBB.
Add gpioled(4) to BEAGLEBONE kernel and add the description of the four
on-board leds of beaglebone-black to its DTS file.
r262194:
Remove an unnecessary header.
r262522:
Fix make depend for iicbus.
r262559:
Inspired by r262522, fix make depend. This fixes the build of gpio modules.
Adds gpioiic.4 and gpioled.4 man pages. Moves some of the information that
was previously available on gpio.4 to their respectives pages. Add the
cross references on gpioctl.8.
Add gpiobus(4) as a link to gpio(4).
dd mrsas(4) driver from LSI official support of newer MegaRAID SAS
cards. LSI has been maintaining this driver outside of the FreeBSD
tree. It overlaps support of ThunderBolt and Invader cards that mfi(4)
supports. By default mfi(4) will attach to cards. If the tunable:
hw.mfi.mrsas_enable=1
is set then mfi(4) will not probe and attach to these newer cards and
allow mrsas(4) to attach. So by default this driver will not effect
a FreeBSD system unless mfi(4) is removed from the kernel or the
tunable is enabled.
mrsas(4) attaches disks to the CAM layer so it depends on CAM and devices
show up as /dev/daX. mfiutil(8) does not work with mrsas. The FreeBSD
version of MegaCli and StorCli from LSI do work with mrsas. It appears
that StorCli only works with mrsas. MegaCli appears to work with mfi(4)
and mrsas(4).
It would be good to add mfiutil(4) support to mrsas, emulations modes,
kernel logging, device aliases to ease the transition between mfi(4)
and mrsas(4).
Style issues should be resolved by LSI when they get committers approved.
The plan is get this driver in FreeBSD 9.3 to improve HW support.
Thanks to LSI for developing, testing and working with FreeBSD to
make this driver co-exist in FreeBSD. This improves the overall
support of MegaRAID SAS.
Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com>
Sponsored by: LSI
Modify Copyright information and other strings to reflect
Qlogic Corporation's purchase of Broadcom's NetXtreme business.
Added clean option to Makefile
Submitted by:David C Somayajulu (davidcs@freebsd.org) QLogic Corporation
Make the HARDWARE section ready for release notes generation; sort SEE ALSO.
Compared to the original revision, the list of supported chipsets was changed to
reflect those supported in this branch.
Make this manpage ready for hardware notes generation, add more Xrefs and perform
general cleanup.
In particular, don't claim rsu(4) devices can be configured with hostname(1)...
r263317:
cxgbe(4): significant rx rework.
- More flexible cluster size selection, including the ability to fall
back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in
case an allocation of a larger size fails.
- A single get_fl_payload() function that assembles the payload into an
mbuf chain for any kind of freelist. This replaces two variants: one
for freelists with buffer packing enabled and another for those without.
- Buffer packing with any sized cluster. It was limited to 4K clusters
only before this change.
- Enable buffer packing for TOE rx queues as well.
- Statistics and tunables to go with all these changes. The driver's
man page will be updated separately.
r263412:
cxgbe(4): if_iqdrops statistic should include tunnel congestion drops.
r263451:
cxgbe(4): man page updates.
This includes r265236, r265237, r265241 and r265261:
------------------------------------------------------------------------
r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines
Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
------------------------------------------------------------------------
------------------------------------------------------------------------
r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines
Add the mpr(4) man page to the man4 Makefile.
This should have been included in r265236.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Sponsored by: LSI, Spectra Logic
------------------------------------------------------------------------
------------------------------------------------------------------------
r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines
Use our standard SYNOPSIS wording; perform some cleanup while here.
------------------------------------------------------------------------
------------------------------------------------------------------------
r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines
Add a missing colon.
------------------------------------------------------------------------
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
- Add the Asus USB-N10 NANO [1]
- Fix panic by adding mtx_assert() to urtwn_init_locked() and
urtwn_stop_locked() [2]
Tested by: Kuan-Chung Chiu <buganini@gmail.com> [1]
Anthony Jenkins <scoobi_doo at yahoo dot com> [2]
r264010: Support speeds up to 12mbaud on newer chips.
r264031: Use 2K IO buffers for improved throughput.
r264149: Add ioctl(2) calls to access bitbang, MPSSE, CPU_FIFO,
and other modes.
Add Tx/Rx multiqueue support to vmx(4)
As a prerequisite for multiple queues, the guest must have MSIX enabled.
Unfortunately, to work around device passthrough bugs, FreeBSD disables
MSIX when running as a VMWare guest due to the hw.pci.honor_msi_blacklist
tunable; this tunable must be disabled for multiple queues.
Also included is various minor changes from the projects/vmxnet branch.
MFC r264865
Update the date that was missed in r263259
