hashfilters. Two because the driver needs to look up a hashfilter by
its 4-tuple or tid.
A couple of fixes while here:
- Reject attempts to add duplicate hashfilters.
- Do not assume that any part of the 4-tuple that isn't specified is 0.
This makes it consistent with all other mandatory parameters that
already require explicit user input.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
The libkqueue tests have several places that leak memory by using an
idiom like:
puts(kevent_to_str(kevp));
Rework to save the pointer returned from kevent_to_str() and then
free() it after it has been used.
Reported by: asomers (pointer to Coverity), Coverity
CID: 1296063, 1296064, 1296065, 1296066, 1296067, 1350287, 1394960
Sponsored by: Dell EMC
r330951 by smh fixed the mps driver to avoid deadlocks when panicing.
The same code is needed for mpr, so port it here, along with the fix
which allows the CCBs scheduled to complete avoiding at least a scary
message and likely other unintended consequences.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D16663
When we're shutting down, we send a number of start/stop commands to
the known targets. We have to wait for them to complete. During a
panic, the interrupts are off, and using pause to wait for them to
fire and complete won't work: we have to poll after pause returns so
the completion routines of the CCBs run so we decrement work
outstanding counts.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D16663
Move evdev_ev_kbd_event() helper from evdev to kbd.c as otherwise evdev
unconditionally requires all keyboard and console stuff to be compiled
into the kernel. This dependency happens as evdev_ev_kbd_event() helper
references kbdsw global variable defined in kbd.c through use of
kbdd_ioctl() macro.
While here make all keyboard drivers respect evdev_rcpt_mask while setting
typematic rate and LEDs with evdev interface.
Requested by: Milan Obuch <bsd@dino.sk>
Reviewed by: hselasky, gonzo
Differential Revision: https://reviews.freebsd.org/D16614
Now softc should be retrieved from struct edvev * pointer
with evdev_get_softc() helper.
wmt(4) is a sample of driver that support both KPI.
Reviewed by: hselasky, gonzo
Differential Revision: https://reviews.freebsd.org/D16614
Newer chips may require assert/deassert after power down for proper
startup. Check respective flag in DEVIDLE_CTRL and perform operation
if neccesssary.
PR: 221777
Submitted by: marc.priggemeyer@gmail.com
Obtained from: DragonFly BSD
Tested on: Thinkpad T470
Updates in the format described in section 9.11 of the Intel SDM can
now be applied as one of the first steps in booting the kernel. Updates
that are loaded this way are automatically re-applied upon exit from
ACPI sleep states, in contrast with the existing cpucontrol(8)-based
method. For the time being only Intel updates are supported.
Microcode update files are passed to the kernel via loader(8). The
file type must be "cpu_microcode" in order for the file to be recognized
as a candidate microcode update. Updates for multiple CPU types may be
concatenated together into a single file, in which case the kernel
will select and apply a matching update. Memory used to store the
update file will be freed back to the system once the update is applied,
so this approach will not consume more memory than required.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16370
Fix a NULL dereference that would occur any time an ioctl() was done, due to a
missing ipmi_enqueue_request callback. Just use the default for now, until we
decide to properly enable IPMI interrupts.
Reported by: kbowling
There used to be one control queue per adapter (the mgmtq) that was
initialized during adapter init and one per port that was initialized
later during port init. This change moves all the control queues (one
per port/channel) to the adapter so that they are initialized during
adapter init and are available before any port is up. This allows the
driver to issue ctrlq work requests over any channel without having to
bring up any port.
MFH: 2 weeks
Sponsored by: Chelsio Communications
own region in the TCAM starting with T6, unlike previous chips where
they were in the same region as normal filters.
These filters "hit" before anything else in the LE's lookup. The exact
order is:
a) High priority filters
b) TOE's active region (TCAM and/or hash)
c) Servers (TOE hw listeners)
d) Normal filters
MFC after: 1 week
Sponsored by: Chelsio Communications
traffic class for rate limiting.
Add experimental knobs that allow the user to specify a default pktsize
and burstsize for traffic classes associated with a port:
dev.<ifname>.<instance>.tc.pktsize
dev.<ifname>.<instance>.tc.burstsize
Sponsored by: Chelsio Communications
The VGA "text mode" buffer has a pair of bytes for each character: One
byte for the character symbol, and an "attribute" byte encoding the
foreground and background colours. When updating the screen, we were
writing these two bytes separately.
On some virtualized systems, every write results in a glyph being redrawn
into a (graphical) virtual screen; writing these two bytes separately
results in twice as much work being done to draw characters, whereas if
we perform a single 16-bit write instead, the character only needs to be
redrawn once.
On an EC2 c5.4xlarge instance, this change cuts 1.30s from the kernel boot,
speeding it up from 8.90s to 7.60s.
MFC after: 1 week
them display the current value of the bitfield rather than the fixed
value that was provided when the sysctl node was created.
MFC after: 1 week
Sponsored by: Chelsio Communications
To compile this driver with evdev support enabled, place
following lines into the kernel configuration file:
options EVDEV_SUPPORT
device evdev
Note: Native and evdev modes are mutually exclusive.
Reviewed by: gonzo, wblock (docs)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11156
We didn't allowed a divider register value of 0 which can exists and
also didn't wrote the value but the divider, which result of a wrong
frequency to be selected
efi_enter here was needed because efi_runtime dereference causes a fault
outside of EFI context, due to runtime table living in runtime service
space. This may cause problems early in boot, though, so instead access it
by converting paddr to KVA for access.
While here, remove the other direct PHYS_TO_DMAP calls and the explicit DMAP
requirement from efidev.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16591
Summary:
Base gcc fails to compile `sys/dev/hyperv/pcib/vmbus_pcib.c` for i386,
with the following -Werror warnings:
cc1: warnings being treated as errors
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'new_pcichild_device':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:567: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'vmbus_pcib_on_channel_callback':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:940: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'hv_pci_protocol_negotiation':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:1012: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'hv_pci_enter_d0':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:1073: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'hv_send_resources_allocated':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:1125: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c: In function 'vmbus_pcib_map_msi':
/usr/src/sys/dev/hyperv/pcib/vmbus_pcib.c:1730: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
This is because on i386, several casts from `uint64_t` to a pointer
reduce the value from 64 bit to 32 bit.
For gcc, this can be fixed by an intermediate cast to uintptr_t. Note
that I am assuming the incoming values will always fit into 32 bit!
Differential Revision: https://reviews.freebsd.org/D15753
MFC after: 3 days
Usbhid's hid_report_size() calculates integral size of all reports of given
kind found in the HID descriptor rather then exact size of report with given
ID as its userland counterpart does. As all input data processed by the
driver is located within the same report, calculate required driver's buffer
size with userland version, imported in one of the previous commits.
This allows us to skip zeroing of buffer on processing of each report.
While here do some minor refactoring.
MFC after: 2 weeks
if present to enable some devices like WaveShare touchscreens. Unlike
Windows we discard content of the blob. We try mimic Windows driver
behaviour from the USB device point of view.
Submitted by: glebius (initial version)
rather than from HID descriptor to match Microsoft documentation.
Fall back to HID descriptor provided value if 'Get Report' request failed.
MFC after: 2 weeks
Summary:
Some architectures, in this case powerpc64, need explicit synchronization
barriers vs device accesses.
Prior to this change, when running 'make buildworld -j72' on a 18-core
(72-thread) POWER9, I would see controller resets often. With this change, I
don't see these resets messages, though another tester still does, for yet to be
determined reasons, so this may not be a complete fix. Additionally, I see a
~5-10% speed up in buildworld times, likely due to not needing to reset the
controller.
Reviewed By: jimharris
Differential Revision: https://reviews.freebsd.org/D16570
- Properly handle snprintf return value for truncation and avoid
overflowing the later write with the bogus length.
- Increase the msgbufr size to handle a rename of 2 full files.
The larger allocation causes a slight performance hit which will be mitigated
in the future. A rewrite with sbufs will likely be done as well.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
MFC after: 2 weeks
Approved by: so (gtetlow)
Reviewed by: kib
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D16098
This actually makes the rights requirements for accessing PCI config
space and BARs using /dev/pci same. Since unchanged /dev/pci mode
only allows write open for root, default configuration de-facto limits
the BAR read to root only. In particular, state-changing reads of the
registers are limited to root.
Discussed with: se
Suggested and reviewed by: jhb (kernel part)
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Differential revision: https://reviews.freebsd.org/D16580
- Ignore any type of TID where the start/end values are not in the
correct order. There are situations where the firmware isn't able to
reserve room for the number requested in the config file but doesn't
report a failure during configuration and instead sets end <= start.
- Track start/end in tid_tab and remove some redundant copies from
adapter->params.
- Move all the start/end and other read-only parameters to a quiet part
of tid_tab, away from the tid locks.
MFC after: 1 week
Sponsored by: Chelsio Communications
initializing the softc for a per-flow rate limiter. The limit happens
to be the same for both and the existing code worked by accident for
common configurations.
Reported by: gallatin@
Sponsored by: Chelsio Communications
Add the ioctl PCIOCBARMMAP on /dev/pci to conveniently create
userspace mapping of a PCI device BAR. This is enormously superior to
read the BAR value with PCIOCREAD and then try to mmap /dev/mem, and
should allow to automatically activate the mapped BARs when needed in
future.
Current implementation creates new sg pager for each user mmap
request. If the pointer (and reference) to a managed device pager is
stored in pci_map, we would be able to revoke all mappings on the BAR
deactivation or relocation. This is related to the unimplemented BAR
activation on mmap, and is postponed for the future.
Discussed with: imp, jhb
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15583
Make sure both sides of the DMA buffer memory accesses for the CORB and RIRB
(control buffers) in snd_hda (device and CPU) can see coherent memory. This
is needed on weakly ordered architectures including PowerPC and ARM. Patch
originally by mmel, with small changes.
This does not cover the data path of snd_hda. We don't have sync operations
for in-progress DMA buffers, to sync ranges of a map.
Reviewed By: mmel
Differential Revision: https://reviews.freebsd.org/D16517
