commit level triggered interrupts would work as long as the pin was not shared
among multiple interrupt sources.
The vlapic now keeps track of level triggered interrupts in the trigger mode
register and will forward the EOI for a level triggered interrupt to the
vioapic. The vioapic in turn uses the EOI to sample the level on the pin and
re-inject the vector if the pin is still asserted.
The vhpet is the first consumer of level triggered interrupts and advertises
that it can generate interrupts on pins 20 through 23 of the vioapic.
Discussed with: grehan@
actual value read by the guest from the device. The IOAPIC ID is now set to
zero in both MPtable/ACPI tables as well as in the ioapic device emulation.
Pointed out by: grehan@
bhyve supports a single timer block with 8 timers. The timers are all 32-bit
and capable of being operated in periodic mode. All timers support interrupt
delivery using MSI. Timers 0 and 1 also support legacy interrupt routing.
At the moment the timers are not connected to any ioapic pins but that will
be addressed in a subsequent commit.
This change is based on a patch from Tycho Nightingale (tycho.nightingale@pluribusnetworks.com).
pin 2 of the IOAPIC.
Add an 'Interrupt Source Override' entry to the MADT to describe this
and start asserting interrupts on pin 2 in the 8254 device model.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
This should be sufficient for 10.0 and will do
until forthcoming work to avoid limitations
in this area is complete.
Thanks to Bela Lubkin at tidalscale for the
headsup on the apic/cpu id/io apic ASL parameters
that are actually hex values and broke when
written as decimal when 11 vCPUs were configured.
Approved by: re@
command line option "-m <memsize in MB>" to specify the memory size.
Prior to this change the user needed to explicitly specify the amount of
memory allocated below 4G (-m <lowmem>) and the amount above 4G (-M <highmem>).
The "-M" option is no longer supported by 'bhyveload' and 'bhyve'.
The start of the PCI hole is fixed at 3GB and cannot be directly changed
using command line options. However it is still possible to change this in
special circumstances via the 'vm_set_lowmem_limit()' API provided by
libvmmapi.
Submitted by: Dinakar Medavaram (initial version)
Reviewed by: grehan
Obtained from: NetApp
This seems prudent to do in its own right but it also opens up the possibility
of not having to mmap the entire guest address space in the 'bhyve' process
context.
Discussed with: grehan
Obtained from: NetApp
bhyve is intended to be a generic hypervisor, and not FreeBSD-specific.
(renaming internal routines will come later)
Reviewed by: neel
Obtained from: NetApp
The -A option will create the minimal set of required ACPI tables in
guest memory. Since ACPI mandates an IOAPIC, the -I option must also
be used.
Template ASL files are created, and then passed to the iasl compiler
to generate AML files. These are then loaded into guest physical mem.
In support of this, the ACPI PM timer is implemented, in 32-bit mode.
Tested on 7.4/8.*/9.*/10-CURRENT.
Reviewed by: neel
Obtained from: NetApp
Discussed with: jhb (a long while back)
