83857 Commits

Author SHA1 Message Date
marius
634258a628 - Fix and enable support for flow control.
- Partially revert r172334; as it turns out the DELAYs in gem_reset_{r,t}x()
  are actually necessary although bus space barriers and gem_bitwait() are
  used, otherwise the controller may trigger an IOMMU errors on at least
  sparc64. This is in line with what Linux and OpenSolaris do.
2010-11-22 22:13:26 +00:00
marius
cbde9c758c - Fix and enable support for flow control.
- Fix compilation with CAS_DEBUG defined.
2010-11-22 22:06:30 +00:00
marius
288ac40397 - Also probe BCM5214 and BCM5222.
- Add some DSP init code for BCM5221. The values derived from Apple's GMAC
  driver and the same init code also exists in Linux's sungem_phy driver.
- Only read media status bits when they are valid.

Obtained from:	NetBSD, OpenBSD
2010-11-22 22:03:11 +00:00
jkim
858709918c Resume critical PCI devices (and their children) first, then everything else
later.  This give us better chance to catch device driver problems.
2010-11-22 21:58:00 +00:00
marius
769a0530db Add support for flow control.
Obtained from:	NetBSD (partially)
2010-11-22 21:24:29 +00:00
marius
21423fafa1 Given that unlike f.e. rgephy(4) these drivers doen't explicitly start an
autonegotiation along with manual media selection and also only report flow
control status when BMCR_AUTOEN is set (at least with gentbi(4) determining
the flow control status results in false-positives when not set), use
MIIF_NOMANPAUSE.
2010-11-22 21:20:11 +00:00
marius
98a6800883 Given that unlike f.e. rgephy(4) this driver doesn't explicitly start an
autonegotiation along with manual media selection and ukphy_status() also
only reports flow control status when BMCR_AUTOEN is set (at least with
gentbi(4) determining the flow control status results in false-positives
when not set), use MIIF_NOMANPAUSE.
2010-11-22 21:13:42 +00:00
marius
7b665e6d2e Add missing newlines.
MFC after:	3 days
2010-11-22 20:57:44 +00:00
bschmidt
82896fc74f Resurrect amd64 support.
- Many drivers on amd64 are picking system uptime, interrupt time and ticks
  via global data structure instead of calling functions for performance
  reasons. For now just patch such address so driver will not trigger page
  fault when trying to access such data. In future, additional callout may
  be added to update data in periodic intervals.
- On amd64 we need to allocate "shadow space" on stack before calling any
  function.

Submitted by:	Paul B Mahol <onemda at gmail.com>
2010-11-22 20:46:38 +00:00
bschmidt
06a992a873 Prefer pmap_extract() over pmap_kextract() as done in MmIsAddressValid().
According to the comment for MmIsAddressValid() there are issues on PAE
kernels using pmap_kextract().

Submitted by:	Paul B Mahol <onemda at gmail.com>
2010-11-22 20:39:29 +00:00
dim
11b4830687 Fix linux kernel module breakage introduced in r215675, by including
<sys/sysent.h>.

Noticed by:	many
Pointy hat to:	netchild
2010-11-22 20:23:18 +00:00
jkim
31be61effa - Disable caches and flush caches/TLBs when we update PAT as we do for MTRR.
Flushing TLBs is required to ensure cache coherency according to the AMD64
architecture manual.  Flushing caches is only required when changing from a
cacheable memory type (WB, WP, or WT) to an uncacheable type (WC, UC, or
UC-).  Since this function is only used once per processor during startup,
there is no need to take any shortcuts.
- Leave PAT indices 0-3 at the default of WB, WT, UC-, and UC.  Program 5 as
WP (from default WT) and 6 as WC (from default UC-).  Leave 4 and 7 at the
default of WB and UC.  This is to avoid transition from a cacheable memory
type to an uncacheable type to minimize possible cache incoherency.  Since
we perform flushing caches and TLBs now, this change may not be necessary
any more but we do not want to take any chances.
- Remove Apple hardware specific quirks.  With the above changes, it seems
this hack is no longer needed.
- Improve pmap_cache_bits() with an array to map PAT memory type to index.
This array is initialized early from pmap_init_pat(), so that we do not need
to handle special cases in the function any more.  Now this function is
identical on both amd64 and i386.

Reviewed by:	jhb
Tested by:	RM (reuf_m at hotmail dot com)
		Ryszard Czekaj (rychoo at freeshell dot net)
		army.of.root (army dot of dot root at googlemail dot com)
MFC after:	3 days
2010-11-22 19:52:44 +00:00
dim
fb307d7d1d After some off-list discussion, revert a number of changes to the
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files.  A better long-term solution is
still being considered.  This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.

Changes reverted:

------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines

Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.

------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines

Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
bschmidt
b040c9742c The meshid element is memcpy()'ed into se_meshid if included in either
beacon or probe-response frames. Fix the condition by checking for the
the array's content instead of the always existing array itself.

Reviewed by:	rpaulo, stefanf
MFC after:	3 days
2010-11-22 19:01:47 +00:00
jh
9c043d5908 Use g_eventlock to protect against losing wakeups in the g_event process
and replace tsleep(9) with msleep(9) which doesn't use a timeout. The
previously used timeout caused the event process to wake up ten times
per second on an idle system.

one_event() is now called with the topology lock held and it returns
with both the topology and event locks held when there are no more
events in the queue.

Reported by:	mav, Marius Nünnerich
Reviewed by:	freebsd-geom
2010-11-22 16:47:53 +00:00
gallatin
40b50edac3 Fix a TSO checksum bug on mxge(4):
The Myri10GE NIC will assume all TSO frames contain partial checksum,
and will emit TSO segments with bad TCP checksums if a TSO frame
contains a full checksum.  The mxge driver takes care to make sure
that TSO is disabled when checksum offload is disabled for this
reason.  However, modules that modify packet contents (like pf) may
end up completing a checksum on a TSO frame, leading to the NIC emitting
TSO segments with bad checksums.

To workaround this, restore the partial checksum in the mxge driver
when we're fed a TSO frame with a full checksum.

Reported by: Bob Healey

MFC after:	3 days
2010-11-22 16:43:05 +00:00
attilio
af24e6ed9f Style fix.
Sponsored by:	Sandvine Incorporated
Requested by:	jhb
Reviewed by:	jhb
MFC after:	1 week
X-MFC:		215544
2010-11-22 15:28:54 +00:00
attilio
7718cbcbf4 Add the ability for GDB to printout the thread name along with other
thread specific informations.

In order to do that, and in order to avoid KBI breakage with existing
infrastructure the following semantic is implemented:
- For live programs, a new member to the PT_LWPINFO is added (pl_tdname)
- For cores, a new ELF note is added (NT_THRMISC) that can be used for
  storing thread specific, miscellaneous, informations. Right now it is
  just popluated with a thread name.

GDB, then, retrieves the correct informations from the corefile via the
BFD interface, as it groks the ELF notes and create appropriate
pseudo-sections.

Sponsored by:	Sandvine Incorporated
Tested by:	gianni
Discussed with:	dim, kan, kib
MFC after:	2 weeks
2010-11-22 14:42:13 +00:00
zec
cc776ae8bd Remove an apparently redundant CURVNET_SET() / CURVNET_RESTORE() pair.
MFC after:	3 days
2010-11-22 14:16:23 +00:00
netchild
81eaf1c587 Do not take the process lock. The assignment to u_short inside the
properly aligned structure is atomic on all supported architectures, and
the thread that should see side-effect of assignment is the same thread
that does assignment.

Use a more appropriate conditional to detect the linux ABI.

Suggested by:	kib
X-MFC:		together with r215664
2010-11-22 12:42:32 +00:00
zec
a5a86ab1cb Allow for MTU sizes of up to ETHER_MAX_LEN_JUMBO (i.e. 9018) bytes to be
configured on ng_eiface ifnets.  The default MTU remains unchanged at
1500 bytes.

Mark ng_eiface ifnets as IFCAP_VLAN_MTU capable, so that the associated
vlan(4) ifnets may use full-sized Ethernet MTUs (1500 bytes).

MFC after:	3 days
2010-11-22 12:32:19 +00:00
netchild
47500ea1a1 Remove trailing dot from the unimplemented futex messages to make
them consistent with the syscall and ipc messages.

Submitted by:	arundel
MFC after:	3 days
2010-11-22 09:25:32 +00:00
cperciva
6cdc82f907 In tc_windup, handle the case where the previous call to tc_windup was
more than 1s earlier.  Prior to this commit, the computation of
th_scale * delta (which produces a 64-bit value equal to the time since
the last tc_windup call in units of 2^(-64) seconds) would overflow and
any complete seconds would be lost.

We fix this by repeatedly converting tc_frequency units of timecounter
to one seconds; this is not exactly correct, since it loses the NTP
adjustment, but if we find ourselves going more than 1s at a time between
clock interrupts, losing a few seconds worth of NTP adjustments is the
least of our problems...
2010-11-22 09:13:25 +00:00
netchild
46e50a7603 By using the 32-bit Linux version of Sun's Java Development Kit 1.6
on FreeBSD (amd64), invocations of "javac" (or "java") eventually
end with the output of "Killed" and exit code 137.

This is caused by:
1. After calling exec() in multithreaded linux program threads are not
   destroyed and continue running. They get killed after program being
   executed finishes.

2. linux_exit_group doesn't return correct exit code when called not
   from group leader. Which happens regularly using sun jvm.

The submitters fix this in a similar way to how NetBSD handles this.

I took the PRs away from dchagin, who seems to be out of touch of
this since a while (no response from him).

The patches committed here are from [2], with some little modifications
from me to the style.

PR:		141439 [1], 144194 [2]
Submitted by:	Stefan Schmidt <stefan.schmidt@stadtbuch.de>, gk
Reviewed by:	rdivacky (in april 2010)
MFC after:	5 days
2010-11-22 09:06:59 +00:00
cperciva
775302a94a In xen_get_timecount, return the full ns-precision time rather than
rounding to 1/HZ precision.

I have no idea why the rounding was introduced in the first place, but
it makes FreeBSD unhappy.
2010-11-22 09:04:29 +00:00
davidxu
b05094dc42 Use atomic instruction to set _has_writer, otherwise there is a race
causes userland to not wake up a thread sleeping in kernel.

MFC after: 3 days
2010-11-22 02:42:02 +00:00
weongyo
1dec7bdf77 Adds a USB packet filter feature to the stack that it could capture
packets which go through each USB host controllers.  Its implementations
are almost based on BPF code and very similar with it except it's
little bit customized for USB packet only.  The userland program
usbdump(8) would be committed soon.

Discussed with:	hps, thompsa, yongari
2010-11-22 01:11:28 +00:00
bz
076c86b1ea Add a missing ';' and change the debugging sysctl from xint to int.
Submitted by:		Mikolaj Golub (to.my.trociny gmail.com)
MFC after:		3 days
2010-11-21 19:33:19 +00:00
kib
e6b1bc24dd Eliminate the mab, maf arrays and related variables.
The change also fixes off-by-one error in the calculation of mreq.

Suggested and reviewed by:	alc
Tested by:	pho
MFC after:	5 days
2010-11-21 10:18:28 +00:00
obrien
7d8fac092d Add lex and yacc sources to things cscope'd. 2010-11-21 03:58:11 +00:00
obrien
0d7dfe1fbd Add x86 to ALL_ARCH. 2010-11-21 03:56:41 +00:00
alc
5bd8badd5e Optimize vm_object_terminate().
Reviewed by:	kib
MFC after:	1 week
2010-11-20 22:30:09 +00:00
cperciva
c2d4047d05 Unifdef XEN. This file is only compiled with the XEN kernel option set,
and the !XEN bits get in the way of understanding the code.
2010-11-20 21:36:12 +00:00
cperciva
b6354cc056 Add VTOM(va) macro as xpmap_ptom(VTOP(va)) to convert to machine addresses.
Clean up the code by converting xpmap_ptom(VTOP(...)) to VTOM(...) and
converting xpmap_ptom(VM_PAGE_TO_PHYS(...)) to VM_PAGE_TO_MACH(...).  In
a few places we take advantage of the fact that xpmap_ptom can commute with
setting PG_* flags.

This commit should have no net effect save to improve the readability of
this code.
2010-11-20 20:04:29 +00:00
andreast
70881bc10b Check the OF_getprop() return value before proceeding. Allocate only as
much space as needed for the mode buffer. Use strcmp, relying on OF giving
back NULL terminated strings.

Submitted by:	marius
Approved by:	nwhitehorn (mentor)
2010-11-20 19:23:16 +00:00
mckusick
f26669fe8c Delete /sys/ufs/ffs/README.snapshot as it is no longer relevant.
Drop reference to it in mount(8).

MFC:	3 days
2010-11-20 18:40:50 +00:00
kib
0116c3c4cf The runlen returned from vm_pageout_flush() might be zero legitimately,
when mreq page has status VM_PAGER_AGAIN.

MFC after:	5 days
2010-11-20 17:27:38 +00:00
bz
6a4a2e62a2 In case of an early return from the function there is no need to zero
the route upfront, so defer as long as we can.

MFC after:	3 days
2010-11-20 12:27:40 +00:00
lstewart
dc840543ff Fix a minor code redundancy nit.
MFC after:	3 days
2010-11-20 08:40:37 +00:00
lstewart
1f06c5de0d When enabling or disabling SIFTR with a VIMAGE kernel, ensure we add or remove
the SIFTR pfil(9) hook functions to or from all network stacks. This patch
allows packets inbound or outbound from a vnet to be "seen" by SIFTR.

Additional work is required to allow SIFTR to actually generate log messages for
all vnet related packets because the siftr_findinpcb() function does not yet
search for inpcbs across all vnets. This issue will be fixed separately.

Reported and tested by:	David Hayes <dahayes at swin edu au>
MFC after:	3 days
2010-11-20 07:36:43 +00:00
kib
7980fb6d3a Remove prtactive variable and related printf()s in the vop_inactive
and vop_reclaim() methods. They seems to be unused, and the reported
situation is normal for the forced unmount.

MFC after:   1 week
X-MFC-note:  keep prtactive symbol in vfs_subr.c
2010-11-19 21:17:34 +00:00
attilio
4902b4f43a Scan the list in reverse order for the shutdown handlers of loaded modules.
This way, when there is a dependency between two modules, the handler of the
latter probed runs first.

This is a similar approach as the modules are unloaded in the same
linkerfile.

Sponsored by:	Sandvine Incorporated
Submitted by:	Nima Misaghian <nmisaghian at sandvine dot com>
MFC after:	1 week
2010-11-19 19:43:56 +00:00
jhb
a38574dd9c Set the POSIX semaphore capability when the semaphore module is enabled.
This is ignored in HEAD where semaphores are marked as always enabled in
<unistd.h>.

MFC after:	1 week
2010-11-19 17:57:50 +00:00
jhb
047d1e801b Set various POSIX capability sysctls to the version of the API that is
supported rather than 1.  They are supposed to return a suitable value
for sysconf(3).  While here, make the fsync sysctl match <unistd.h>.

MFC after:	1 week
2010-11-19 17:56:16 +00:00
alc
40263c2648 Reduce the amount of detail printed by vm_page_free_toq() when it panics.
Reviewed by:	kib
2010-11-19 17:49:08 +00:00
cperciva
8ee7b1a00a Make pmap_release consistent with pmap_pinit with respect to unpinning
pages.  The pinning of NPGPTD pages is #if 0ed out in pmap_pinit (I'm
not quite sure why...) and this commit adds a corresponding #if 0 in
pmap_release to avoid unpinning those pages.

Some versions of Xen seem to silently ignore requests to unpin pages
which were never pinned in the first place, but some return an error
(causing FreeBSD to panic) prior to this commit.
2010-11-19 15:12:19 +00:00
avg
f91dfaab21 specialreg.h: add definitions for MPERF/APERF pair of MSRs
These MSRs can be used to determine actual (average) performance as
compared to a maximum defined performance.
Availability of these MSRs is indicated by bit0 in CPUID.6.ECX on both
Intel and AMD processors.

MFC after:	5 days
2010-11-19 15:07:36 +00:00
avg
d7d1ad6e26 specialreg.h: add AMD-specific "Hardware Configuration Register" MSR
It seems that this MSR has been available in a range of AMD processors
families for quite a while now.

Note1: not all AMD MSRs that are found in amd64 specialreg.h are also in
the i386 version.
Note2: perhaps some additional name component is needed to distinguish
AMD-specific MSRs.

MFC after:	5 days
2010-11-19 15:00:20 +00:00
avg
c97d63e256 specialreg.h: add definition for AMD Core Performance Boost bit
This bit indicates availability of the feature.

MFC after:	4 days
2010-11-19 14:46:17 +00:00
mlaier
67f52f02f5 Off by one page in vm_reserv_reclaim_contig(): Also reclaim reservations
with only a single free page if that satisfies the requested size.

MFC after:	3 days
Reviewed by:	alc
2010-11-19 04:30:33 +00:00