Should unbreak gcc build as reported by tinderbox:
lib/libc/gen/scandir.c:59:12: warning: 'alphasort_thunk' declared 'static' but never defined [-Wunused-function]
Rx is more efficient within the chip when the receive buffer size
matches the TLS PDU size.
MFC after: 3 days
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26127
Attempt of adding assertions that pgrp->pg_jobc counters do not
underflow in r361967, reverted in r362910, points out bugs in the
handling of job control. Peter Holm was able to narrow down the
problem to very easy reproduction with timeout(1) which uses reaping.
The following list of problems with calculation of pg_jobs which
directs SIGHUP/SIGCONT delivery for orphaned process group was
identified:
- Re-calculation of the orphaned status for children of exiting parent
was wrong, but mostly unnoticed when all children were reparented to
init(8). When child can be reparented to a different process which
could affect the child' job control state, it was not properly
accounted for in pg_jobc.
- Lockless check for exiting process' parent process group is racy
because nothing prevents the parent from changing its group
membership.
- Exited process is left in the process group, until waited. This
affects other calculations of pg_jobc.
Split handling of job control status on process changing its process
group, and process exiting. Calculate increments and decrements for
pg_jobs by exact checking the orphanage instead of assuming process
group membership for children and parent. Move the call to killjobc()
later under the proctree_lock. Mark exiting process in killjobc()
with a new flag P_TREE_GRPEXITED and skip it for all pg_jobc
calculations after the flag is set.
Add checker that independently recalculates pg_jobc value and compares
it with the memoized process group state. This is enabled under INVARIANTS.
Reviewed by: jilles
Discussed with: kevans
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D26116
mtree(5) and mtree(8) come from different contrib sources. The former
already had an xref to the latter, but not the other way around.
MFC after: 1 week
No functional changes.
Most of the routing flags are stored in the netxtop instead of rtentry.
Rename rt->rt_flags to rt->rte_flags to simplify reading/modifying code
checking routing flags.
In the new multipath code, rt->rt_nhop may actually point to nexthop group
instead of nhop. To ease transition, reduce the amount of rt->rt_nhop->...
accesses.
Differential Revision: https://reviews.freebsd.org/D26156
hw.bus.devctl_disable has tagged been obsolete for a decade. Remove it. Also
remove some long obsolete comments. This was done and backed out once in 2014,
but we've had enough releases with the 'new' method of setting queue length that
we can just remove this sysctl now (stable/11, stable/12 and current all don't
reference it).
RTF_HOST indicates whether route is a host route
(netmask is empty or /{32,128}).
Check that if netmask is empty and host route is not specified, kernel
returns an error.
Differential Revision: https://reviews.freebsd.org/D26155
According to the ARM Design Document "IO Remapping Table Platform"
(DEN 0049D), the "Number of IDs" field of the ID mapping format means
"The number of IDs in the range minus one".
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D25179
part of std::random_shuffle. These were split off at some point by
upstream, but I forgot to add them to our Makefile.
This should allow some ports which use std::random_shuffle to correctly
link again.
Reported by: thierry
PR: 248795
MFC after: 6 weeks
X-MFX-With: r364284
-n omits the name of the variable regardless of the type of information that is
requested. Rephrase to clarify this point.
PR: 242191
Submitted by: stilezy@gmail.com
Approved by: emaste@
Differential Revision: https://reviews.freebsd.org/D26149
Instantiate Error in Target::GetEntryPointAddress() only when
necessary
When Target::GetEntryPointAddress() calls
exe_module->GetObjectFile()->GetEntryPointAddress(), and the returned
entry_addr is valid, it can immediately be returned.
However, just before that, an llvm::Error value has been setup, but
in this case it is not consumed before returning, like is done
further below in the function.
In https://bugs.freebsd.org/248745 we got a bug report for this,
where a very simple test case aborts and dumps core:
* thread #1, name = 'testcase', stop reason = breakpoint 1.1
frame #0: 0x00000000002018d4 testcase`main(argc=1, argv=0x00007fffffffea18) at testcase.c:3:5
1 int main(int argc, char *argv[])
2 {
-> 3 return 0;
4 }
(lldb) p argc
Program aborted due to an unhandled Error:
Error value was Success. (Note: Success values must still be checked prior to being destroyed).
Thread 1 received signal SIGABRT, Aborted.
thr_kill () at thr_kill.S:3
3 thr_kill.S: No such file or directory.
(gdb) bt
#0 thr_kill () at thr_kill.S:3
#1 0x00000008049a0004 in __raise (s=6) at /usr/src/lib/libc/gen/raise.c:52
#2 0x0000000804916229 in abort () at /usr/src/lib/libc/stdlib/abort.c:67
#3 0x000000000451b5f5 in fatalUncheckedError () at /usr/src/contrib/llvm-project/llvm/lib/Support/Error.cpp:112
#4 0x00000000019cf008 in GetEntryPointAddress () at /usr/src/contrib/llvm-project/llvm/include/llvm/Support/Error.h:267
#5 0x0000000001bccbd8 in ConstructorSetup () at /usr/src/contrib/llvm-project/lldb/source/Target/ThreadPlanCallFunction.cpp:67
#6 0x0000000001bcd2c0 in ThreadPlanCallFunction () at /usr/src/contrib/llvm-project/lldb/source/Target/ThreadPlanCallFunction.cpp:114
#7 0x00000000020076d4 in InferiorCallMmap () at /usr/src/contrib/llvm-project/lldb/source/Plugins/Process/Utility/InferiorCallPOSIX.cpp:97
#8 0x0000000001f4be33 in DoAllocateMemory () at /usr/src/contrib/llvm-project/lldb/source/Plugins/Process/FreeBSD/ProcessFreeBSD.cpp:604
#9 0x0000000001fe51b9 in AllocatePage () at /usr/src/contrib/llvm-project/lldb/source/Target/Memory.cpp:347
#10 0x0000000001fe5385 in AllocateMemory () at /usr/src/contrib/llvm-project/lldb/source/Target/Memory.cpp:383
#11 0x0000000001974da2 in AllocateMemory () at /usr/src/contrib/llvm-project/lldb/source/Target/Process.cpp:2301
#12 CanJIT () at /usr/src/contrib/llvm-project/lldb/source/Target/Process.cpp:2331
#13 0x0000000001a1bf3d in Evaluate () at /usr/src/contrib/llvm-project/lldb/source/Expression/UserExpression.cpp:190
#14 0x00000000019ce7a2 in EvaluateExpression () at /usr/src/contrib/llvm-project/lldb/source/Target/Target.cpp:2372
#15 0x0000000001ad784c in EvaluateExpression () at /usr/src/contrib/llvm-project/lldb/source/Commands/CommandObjectExpression.cpp:414
#16 0x0000000001ad86ae in DoExecute () at /usr/src/contrib/llvm-project/lldb/source/Commands/CommandObjectExpression.cpp:646
#17 0x0000000001a5e3ed in Execute () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandObject.cpp:1003
#18 0x0000000001a6c4a3 in HandleCommand () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandInterpreter.cpp:1762
#19 0x0000000001a6f98c in IOHandlerInputComplete () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandInterpreter.cpp:2760
#20 0x0000000001a90b08 in Run () at /usr/src/contrib/llvm-project/lldb/source/Core/IOHandler.cpp:548
#21 0x00000000019a6c6a in ExecuteIOHandlers () at /usr/src/contrib/llvm-project/lldb/source/Core/Debugger.cpp:903
#22 0x0000000001a70337 in RunCommandInterpreter () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandInterpreter.cpp:2946
#23 0x0000000001d9d812 in RunCommandInterpreter () at /usr/src/contrib/llvm-project/lldb/source/API/SBDebugger.cpp:1169
#24 0x0000000001918be8 in MainLoop () at /usr/src/contrib/llvm-project/lldb/tools/driver/Driver.cpp:675
#25 0x000000000191a114 in main () at /usr/src/contrib/llvm-project/lldb/tools/driver/Driver.cpp:890
Fix the incorrect error catch by only instantiating an Error object
if it is necessary.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D86355
This should fix lldb aborting as described in the scenario above.
Reported by: dmgk
PR: 248745
The actual bug is not yet addressed as it will get much easier after other
problems are addressed (most notably rename contract).
The only affected in-tree consumer is realpath. Everyone else happens to be
performing lookups within a mount point, having a side effect of ni_dvp being
set to mount point's root vnode in the worst case.
Reported by: pho
An internet draft titled "Towards Remote Procedure Call Encryption By Default"
describes how TLS is to be used for Sun RPC, with NFS as an intended use case.
This patch adds client and server support for this to the kernel RPC,
using KERN_TLS and upcalls to daemons for the handshake, peer reset and
other non-application data record cases.
The upcalls to the daemons use three fields to uniquely identify the
TCP connection. They are the time.tv_sec, time.tv_usec of the connection
establshment, plus a 64bit sequence number. The time fields avoid problems
with re-use of the sequence number after a daemon restart.
For the server side, once a Null RPC with AUTH_TLS is received, kernel
reception on the socket is blocked and an upcall to the rpctlssd(8) daemon
is done to perform the TLS handshake. Upon completion, the completion
status of the handshake is stored in xp_tls as flag bits and the reply to
the Null RPC is sent.
For the client, if CLSET_TLS has been set, a new TCP connection will
send the Null RPC with AUTH_TLS to initiate the handshake. The client
kernel RPC code will then block kernel I/O on the socket and do an upcall
to the rpctlscd(8) daemon to perform the handshake.
If the upcall is successful, ct_rcvstate will be maintained to indicate
if/when an upcall is being done.
If non-application data records are received, the code does an upcall to
the appropriate daemon, which will do a SSL_read() of 0 length to handle
the record(s).
When the socket is being shut down, upcalls are done to the daemons, so
that they can perform SSL_shutdown() calls to perform the "peer reset".
The rpctlssd(8) and rpctlscd(8) daemons require a patched version of the
openssl library and, as such, will not be committed to head at this time.
Although the changes done by this patch are fairly numerous, there should
be no semantics change to the kernel RPC at this time.
A future commit to the NFS code will optionally enable use of TLS for NFS.
upstream so Version.inc now only defines LLD_VERSION_STRING.
This breaks the WANT_LINKER_VERSION magic and might lead to us building
more than needed (e.g., for croos-tools).
Change the awk script to parse LLD_VERSION_STRING instead of LLD_VERSION,
which not only unbreaks the current situation but should also be backwards
compatible as dim points out.
PR: 248818
Reviewed by: emaste, dim (seems right and the way to go)
MFC after: 4 weeks
X-MFC before: 364284
Allow to dynamically grow the amount of fibs in each vnet.
This change alters current behavior. Currently, if one defines
ROUTETABLES > 1 in the kernel config, each vnet will be created
with the number of fibs defined in the kernel config.
After this commit vnets will be created with fibs=1.
Dynamic net.fibs is not compatible with net.add_addr_allfibs.
The plan is to deprecate the latter and make
net.add_addr_allfibs=0 default behaviour.
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26062
Coverity flagged this condition: The condition
offset == 0 && offset == 65535
can never be true because offset cannot be equal
to two different values at the same time.
Submitted by: bret_ketchum@dell.com
Reported by: Coverity
Reviewed by: tsoome, cem
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26144
The zone limit mechanism was recently reworked, and
allocation failures due to limits being exceeded
were inadvertently no longer being recorded. This
would lead to, for example, mbuf allocation failures
not being indicated in netstat -m or vmstat -z
Reviewed by: markj
Sponsored by: Netflix
Coverity has identified the line in this change as "Potential integer
overflowing expression" due to the variable i declared as an int
and used in an expression with vm_paddr_t, a 64bit variable.
This change has very little effect as when this line is execute
nkpt is small and phys_addr is a the beginning of physical memory.
But there is no explicit protection that the above is true.
Submitted by: bret_ketchum@dell.com
Reported by: Coverity
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26141
[PowerPC] Fix a typo for InstAlias of mfsprg
D77531 has a type for mfsprg, it should be mtsprg. This patch is to
fix this typo.
This should fix booting powerpc64 kernels, after LLVM 11 was imported.
PR: 248763
- Remove trailing whitespace
- Address igor and mandoc warnings
- Sort options
- Use macros consistently (e.g., Fl for flags, Dq for quoting, Bd for code
blocks)
- Add a history section
- Fix incorrect use of macros in various places
MFC after: 2 weeks
After spending a lot of time trying to track down what was going on, I have
isolated the "black screen" failures when using boot1 to boot a G4 machine.
It turns out we were replacing the traps before installing the temporary
BAT entry for the bottom of physical memory. That meant that until the MMU
was bootstrapped, the cached translations were the only thing keeping us
from losing.
Throwing boot1 into the mix was affecting execution flow enough to cause us
to hit an uncached page and crash.
Fix this by properly setting up the initial BAT entry at the same time we
are replacing the OpenFirmware traps, so we can continue executing in
segment 0 until the rest of the DMAP has been set up.
A second thing discovered while researching this is that we were entering a
BAT region for segment 16. It turns out this range was a) considered part
of KVA, and b) has firmware mappings with varying attributes.
If we ever accessed an unmapped page in segment 16, it would cause a BAT
entry to be installed for the whole segment, which would bypass the
existing mappings until it was flushed out again.
Instead, translate the OFW memory attributes into VM memory attributes and
install the ranges into the kernel address space properly.
Reviewed by: adalava
MFC after: 3 weeks
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D25547
This fixes spurious "XIVE[ IC 00 ] ISN 1 lead to invalid IVE !" messages
generated by OPAL when running with the debug level cranked up.
Discussed with jhibbits.
Sponsored by: Tag1 Consulting, Inc.
When files are read from .rc or .4th, verify_file is asked to
guess the severity (VE_TRY,VE_WANT,VE_MUST)
Reviewed by: stevek
MFC after: 1 week
Sponsored by: Juniper Networks
than command in the loader.conf, the latter needs to be nul terminated,
otherwise garbage trailer left from zfs_nextboot() will be passed to
parse_cmd() together with loader.conf command.
While here, reset cmd to empty string if read() returns error.
Reviewed by: tsoome
To define USDT probes, dtrace -G makes use of relocations for undefined
symbols: the target address is overwritten with NOPs and the location is
recorded in the DOF section of the output object file. To avoid link
errors, the original relocation is destroyed. However, this means that
the same input object file cannot be processed multiple times, as
happens during incremental rebuilds. Instead, only set the relocation
type to NONE, so that all information required to reconstruct USDT
probes is preserved.
Reported by: bdrewery
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
This file is too complicated as it is and has diverged a fair bit from
illumos due to toolchain differences, so just drop unused code
(including SPARC support).
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
