d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,555 Commits 4 Branches 49 Tags
Commit Graph

461 Commits

Author SHA1 Message Date
Jordan K. Hubbard
e7ab243a99 1. Fill out the crunch target - this should do the trick (we'll see). 
2. Remove the NOOBJ line - we want an object dir now.
 1994-06-15 21:21:50 +00:00
Jordan K. Hubbard
b4c84151ac Add a beep to the load_fd stuff for each floppy insert request so 
that you can read a book and load the floppy distribution at the same
time.. :-)
 1994-06-15 21:04:04 +00:00
Jordan K. Hubbard
d5500fb5b4 Remove the --exclude libc.so.1.1 line; with a static gzip and tar we 
no longer need it, and it's just one more thing we would have to remember
to change with every shared lib version bump.
 1994-06-15 21:02:36 +00:00
Jordan K. Hubbard
1c51f14a0f Install manpath.config and mail.rc properly, and directly from the src 
tree now (rather than having a local copy.
 1994-06-15 20:43:20 +00:00
Adam David
4a1bed6807 added comments for how to use CCFPU and MDEC_OPT 1994-06-15 20:24:16 +00:00
Jordan K. Hubbard
b83e1e51be Commit Rod's magic EXTRACT scripts to the tree so that we can work on 
them.  These were al hand-copied over before.
 1994-06-15 20:15:12 +00:00
Jordan K. Hubbard
220273aa91 Lots of changes: 
1. Properly use ${.CURDIR} now instead of hardcoded relative dirs.
2. Use ${BINOWN} and ${BINGRP} everywhere instead of root/wheel
3. Add target for copying over EXTRACT scripts (and add them here).
4. Start thinking about crunched floppy target (not in yet, next commit).
 1994-06-15 20:14:29 +00:00
Jordan K. Hubbard
abe5ea49b0 1. Bump minimum root size to 8MB (we need that much now). 
2. Bump version number to 1.1.5 for impending release.
 1994-06-15 19:23:33 +00:00
Andrey A. Chernov
c4a6b5c74b Remove CXXFLAGS from here, handled in another place 1994-06-14 11:46:52 +00:00
Garrett Wollman
e4d7745b19 Added comment about registerd and kpasswdd not working in 1.x. 
Deleted commented-out line which would start mountd; that's not
the right pplace to do it (don't confuse the users).
Should probablyhave uncommented rpc.rstatd, but didn't.
 1994-06-13 22:41:04 +00:00
Geoff Rehmet
1c26cf22f7 Change default for directory permissions to be 0755. 1994-06-12 16:20:36 +00:00
Geoff Rehmet
bccbb20f01 Modify messages about the resolver manual page as per Rod's suggestions. 
The configure function now tells the user to type "man 5 resolver"
for more info on resolv.conf, but mentions that the bindist must
be fully installed before this can be done (actually a user won't
have reached this stage if he doesn't have an installed bindist ;-)
 1994-06-12 11:05:04 +00:00
Geoff Rehmet
3b7e1fa300 Allow configuration of resolv.conf though "configure". The 
configuration which is done is minimal, and the script refers the user
to the resolver(5) manual page for information on fine-tuning name
resolution.
 1994-06-11 12:42:35 +00:00
Andrey A. Chernov
476a220578 Add commented out PRINTER=ps entry for easy choose 
system documentation format
 1994-06-09 11:13:52 +00:00
Andrey A. Chernov
e6f5a68194 Add commented out CXXFLAGS entry similar to CFLAGS entry 1994-06-09 08:32:58 +00:00
Geoff Rehmet
2548fdfaea Change all lib*.so.1.0 to lib*.so.1.1 
(Once again, pointed out by Volker Paepcke.)
 1994-06-08 11:01:46 +00:00
Geoff Rehmet
80dde3cb2b Change reference to libc.so.1.0 to libc.so.1.1. 
(Pointed out by Volker Paepcke)
 1994-06-08 10:52:10 +00:00
Poul-Henning Kamp
2e3ceddd61 check for diskless boot, and remount / RW in that case. 1994-06-06 17:45:37 +00:00
Geoff Rehmet
624ca9967b Add mention of WANT_MSUN, HAVE_FPU and NOMANCOMPRESS 
(NOMANCOMPRESS works together with the new bsd.man.mk to turn off
compression of manual pages - manual pages are installed compressed
by default now.)
 1994-06-05 20:37:15 +00:00
Andreas Schulz
aee153581e Comment out the startup of the xtend daemon by default. 1994-06-05 16:03:57 +00:00
Jordan K. Hubbard
0b1915b6d4 I just realized that the vtty's won't kick in until the user loads the bindist 
and reboots multiuser.  Ammend the text slightly to avoid confusion.
 1994-06-04 12:00:51 +00:00
Jordan K. Hubbard
ed7be55bbd 1. Bumped version number to 1.1.5 in preparation for impending release. 
2. Added notes that tell the user a little bit about how to use syscons
   since they'll be running it from the outset now and would probably like
   to know how to switch terminals.
 1994-06-04 11:55:56 +00:00
Poul-Henning Kamp
5a3b854f62 Added reference to RFC 1597 about "private-net" IP#'s. The following numbers 
will never be routed over the InterNet:
	10.0.0.0        -   10.255.255.255
        172.16.0.0      -   172.31.255.255
        192.168.0.0     -   192.168.255.255
 1994-06-04 02:03:45 +00:00
Andrey A. Chernov
b3108fb8a1 Now rc.serial used for initial setup of serial lines 1994-06-04 00:44:00 +00:00
Geoff Rehmet
4085cb917d make /etc/motd mode 644 NOT 666 
(Thank heavens I run cops every night.)
 1994-06-03 08:54:35 +00:00
Jordan K. Hubbard
01d4912665 Fix the absolute paths for boot blocks. Now uses ${DESTDIR}. 1994-06-03 05:18:18 +00:00
Paul Richards
eb865f3871 Added 
if [ -x /usr/libexec/xtend ]; then
          echo -n ' xtend';   /usr/libexec/xtend
     fi

to etc/rc
 1994-06-01 17:04:01 +00:00
Andrey A. Chernov
a374f55b15 Restore bin.bin for /usr/libexec/uucp, uucp owner not needed here 1994-06-01 02:39:37 +00:00
Poul-Henning Kamp
da63052f1e added make.conf template, which does nothing. 1994-06-01 00:58:06 +00:00
Andrey A. Chernov
6aba0e831e Comment out uucpd, not properly configured as default 
Comment out walld/rusersd/rstatd, may be too verbose
 1994-05-31 17:55:38 +00:00
Andrey A. Chernov
ef8525f6a5 Change mode of libexec/uucp to 0755 1994-05-31 15:59:14 +00:00
Andrey A. Chernov
d05c8c1906 Mode 0775 for /var/spool/lock 1994-05-31 07:49:53 +00:00
Andrey A. Chernov
1b7219ff62 Change /var/spool/uucp/* modes to 0775 1994-05-31 05:05:41 +00:00
Andrey A. Chernov
5db77d7e3a Make /usr/libexec/uucp uucp.uucp 0750 1994-05-31 05:00:24 +00:00
Andrey A. Chernov
e1e52bf058 Make /etc/uucp uucp.uucp 0770 1994-05-31 04:53:08 +00:00
Andrey A. Chernov
5f7d00d180 Uncomment uucpd, now it works 
Uncomment rstatd/rusersd/rwalld all three worked
mountd still commented out, I remember some problem with it
 1994-05-31 04:48:49 +00:00
Andrey A. Chernov
5a433546e8 Intruduce new group for uucp, gid 66 
Change uucp directories group too
Change "lock" directory group to "dialer" to allow various
dialout applications to access it
 1994-05-31 04:38:13 +00:00
Andrey A. Chernov
62936ec704 Intruduce new group for uucp, gid 66 1994-05-31 04:36:30 +00:00
Andrey A. Chernov
f21bfa8ee5 From Ache: 
Add proper devices for new sio initial/locking mechanism
 1994-05-30 03:53:01 +00:00
Andrey A. Chernov
b04a36b2c2 Path of uucp lock/temp corrected 1994-05-23 11:22:10 +00:00
Rodney W. Grimes
26ceed66d4 Fix all the sound devices to NOT have the absolute path /dev, the makes for 
missing device files in releases!!
 1994-05-21 08:55:52 +00:00
Jordan K. Hubbard
7a7d4eea40 Gordon Burditt <gordon@sneaky.lonestar.org> 
Fix ownership of catpages, make ~uucp/uucppublic really public.
 1994-05-20 22:50:37 +00:00
Guido van Rooij
110af3d672 1) Added s/key support . 
2  Added optional excessive login logging.
3) Added login acces control on a per host/tty base.
4) See skey(1) for skey descriptions and src/usr.bin/login/README
  for the logging and access control features.

-Guido
 1994-05-19 18:13:11 +00:00
Guido van Rooij
9eb28b5fde 1) Added s/key support . 
2  Added optional excessive login logging.
3) Added login acces control on a per host/tty base.
4) See skey(1) for skey descriptions and src/usr.bin/login/README
  for the logging and access control features.

-Guido
 1994-05-19 18:06:46 +00:00
Geoff Rehmet
aaa3c1f6ba Turn on purging of accounting records in /etc/daily. 
(Now that we have sa)
 1994-05-19 12:34:48 +00:00
Rodney W. Grimes
077fcb73f8 Add the installation of /var/crash/minfree with a value of 2048 so that 
savecore will not FILL the /var partition.
 1994-05-19 12:29:29 +00:00
Jordan K. Hubbard
7838b155ee Use "cons25" for console too since we're now syscons. Turn on two 
VTY's by default; give user a couple of vty's to play with out of the box
(leave 4th entry turned off for X).
 1994-05-19 11:07:56 +00:00
Jordan K. Hubbard
d4d8a38f6f Add 4 VTY's back to the list of things to create by default (the codrv 
comments were obsolete), also create a PS/2 mouse entry.
 1994-05-19 11:05:09 +00:00
Jordan K. Hubbard
d6a9fa2292 Add manpath.config to the default list of things installed in /etc 
for releases.
 1994-05-17 13:03:36 +00:00
Rodney W. Grimes
862d153aaa Fisx spelling error from John Lind 1994-05-15 01:10:17 +00:00