- Restructure selscan() and selrescan() to avoid producing extra selfps
when we have a fd in multiple sets. As described below multiple selfps
may still exist for other reasons.
- Make selrescan() tolerate multiple selfds for a given descriptor
set since sockets use two selinfos per fd. If an event on each selinfo
fires selrescan() will see the descriptor twice. This could result in
select() returning 2x the number of fds actually existing in fd sets.
Reported by: mgleason@ncftp.com
pointers to the callout handler just before and just after the callout
it invoked. I attempted to do this in a manner congruent to tracing in
Solaris's callout mechanism, but couldn't quite use the same names due
to convention and syntax differences.
Example DTrace script to generate a distribution graph of callout
execution times:
callout_execute:::callout_start
{
self->cstart = timestamp;
}
callout_execute:::callout_end
{
@length = quantize(timestamp - self->cstart);
}
Reviewed by: jb
MFC after: 3 days
inside the SYSCTL() macros and thus does not need to be done for
all of the nodes scattered across the source tree.
- Mark the name-cache related sysctl's (including debug.hashstat.*) MPSAFE.
- Mark vm.loadavg MPSAFE.
- Remove GIANT_REQUIRED from vmtotal() (everything in this routine already
has sufficient locking) and mark vm.vmtotal MPSAFE.
- Mark the vm.stats.(sys|vm).* sysctls MPSAFE.
around calls to vlrureclaim() on non-MPSAFE filesystems. Specifically,
vnlru no longer needs Giant for the common case of waking up and deciding
there is nothing for it to do.
MFC after: 2 weeks
the helper function. It is supposed to be useful for any filesystem
that has to unlock dvp to walk to the ".." entry in lookup routine.
Requested by: jhb
Tested by: pho
MFC after: 1 month
VOP_MARKATIME() since unlike the rest of VOP_SETATTR(), VA_MARKATIME
can be performed while holding a shared vnode lock (the same functionality
is done internally by VOP_READ which can run with a shared vnode lock).
Add missing locking of the vnode interlock to the ufs implementation and
remove a special note and test from the NFS client about not supporting the
feature.
Inspired by: ups
Tested by: pho
section of code, this uses WITNESS_NORELEASE() and WITNESS_RELEASEOK() to mark
the boundaries. Both functions require the lock to be held when calling.
This is intended for scenarios like a bus asserting that the bus lock is not
dropped during a driver call. There doesn't appear to be a man page to
document this in.
Reviewed by: jhb
vnode, from -1 down. When vinvalbuf(vp, V_ALT) is done for the vnode, it
incorrectly does vm_object_page_remove(0, 0), removing all pages from
the underlying vm object, not only the pages that back the extended
attributes data.
Change vinvalbuf() to not remove any pages from the object when
V_NORMAL or V_ALT are specified. Instead, the only in-tree caller
in ffs_inode.c:ffs_truncate() that specifies V_ALT explicitely
removes the corresponding page range. The V_NORMAL caller
does vnode_pager_setsize(vp, 0) immediately after the call to
vinvalbuf(V_NORMAL) already.
Reported by: csjp
Reviewed by: ups
MFC after: 3 weeks
In normal operation, the number of cache entries is roughly equal to the
number of active vnodes. However, when most of the recently accessed
vnodes have many hard links, the number of cache entries can be 32000
times as large, exhausting kernel memory and provoking a panic in
kmem_malloc().
MFC after: 2 weeks
with src/tools/sched/schedgraph.py. This allows developers to quickly
create a graphical view of ktr data for any resource in the system.
- Add sched_tdname() and the pcpu field 'name' for quickly and uniformly
identifying records associated with a thread or cpu.
- Reimplement the KTR_SCHED traces using the new generic facility.
Obtained from: attilio
Discussed with: jhb
Sponsored by: Nokia
guarantee atomicity of the operation for other semaphore consumers.
In particular, this should guard against access to the semaphore with
not done or partially done MAC label assignment.
Reviewed by: rwatson
MFC after: 1 month
on SysV semaphores.
The squeeze of the semaphore array in the kern_semctl() modifies
sem_base for the semaphores with sem_base greater then sem_base of
the removed semaphore, as well as the values of the semaphores,
without locking their mutex. This can lead to (killable) hangs or
unexpected behaviour of the processes performing any sem operations
while other process does IPC_RMID.
The semexit_myhook() eventhandler unlocks SEMUNDO_LOCK() while
accessing *suptr. This allows for IPC_RMID for the sem id to be
performed in parallel with undo hook referenced by the current undo
structure. This leads to the panic("semexit - semid not allocated") [1].
The semaphore creation is protected by Giant, while IPC_RMID is done
while only semaphore mutex is held. This seems to result in invalid
values for semtot, causing random ENOSPC error returns [2].
Redo the locking of the semaphores lifetime cycle. Delegate the
sem_mtx to the sole purpose of protecting semget() and
semctl(IPC_RMID). Introduce new sem_undo_mtx to protect SEM_UNDO
handling. Remove the Giant remnants from the code.
Note that mac_sysvsem_check_semget() and mac_sysvsem_create() are
now called while sem_mtx is held, as well as mac_sysvsem_cleanup() [3].
When semaphore is removed, acquire semaphore locks for all semaphores
with sem_base that is going to be changed by squeeze of the sema
array. The lock order is not important there, because the region is
protected by sem_mtx.
Organize both used and free sem_undo structures into the lists,
protected by sem_undo_mtx. In semexit_myhook(), remove sem_undo
structure that is being processed, from used list, without putting it
onto the free to prevent modifications by other threads. This allows
for sem_undo_lock to be dropped to acquire individial semaphore locks
without violating lock order. Since IPC_RMID may no longer find this
sem_undo, do tolerate references to unallocated semaphores in undo
structure, and check sequential number to not undo unrelated semaphore
with the same id.
While there, convert functions definitions to ANSI C and fix small
style(9) glitches.
Reported by: Omer Faruk Sen <omerfsen gmail com> [1], pho [2]
Reviewed by: rwatson [3]
Tested by: pho
MFC after: 1 month
locked. Lookup could attempt to recursively lock that vnode.
Do not call vn_start_write(V_WAIT) while vnode is locked, this may
result in a deadlock with suspension.
vfs_busy() the mountpoint before dropping vnode lock for vnode
that was used to look up the mountpoint, to prevent unmount in
between.
Reported and tested by: pho
Reviewed by: rwatson
MFC after: 3 weeks
During boot, the domain list is locked with Giant. It is not possible to
register any protocols after the system has booted, so the lock is only
used to protect insertion of entries.
There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex
to lock the list, instead of using Giant. It won't matter anything with
respect to performance, but we'll never get rid of Giant if we don't
remove from places where we don't need it.
Approved by: rwatson
MFC after: 3 weeks
of the counter, that may happen when too many sendfile(2) calls are
being executed with this vnode [1].
To keep the size of the struct vm_page and offsets of the fields
accessed by out-of-tree modules, swap the types and locations
of the wire_count and cow fields. Add safety checks to detect cow
overflow and force fallback to the normal copy code for zero-copy
sockets. [2]
Reported by: Anton Yuzhaninov <citrin citrin ru> [1]
Suggested by: alc [2]
Reviewed by: alc
MFC after: 2 weeks
During startup some of the syscons TTY's are used to set attributes like
the screensaver and mouse options. These actions cause /dev/console to
be rendered unusable.
Fix the issue by leaving the TTY opened when it is used as the console
device.
Reported by: imp
the field in the mbuf constructors, since otherwise we have no way to
tell if they are valid. In the future, Kip has plans to add a flag
specifically to indicate validity, which is the preferred model.
When sysctl() is being called with a buffer that is too small, it will
return ENOMEM. Unfortunately the changes I made the other day sets the
error number to 0, because it just returns the error number of the
copyout(). Revert this part of the change.
did not compared nc_dvp with supplied parent directory vnode pointer.
Add the check and note that now branches for vp != NULL and vp == NULL
are the same, thus can be merged.
Reported and reviewed by: kan
Tested by: pho
MFC after: 2 weeks
It seems I forgot to remove `int error' from a single piece of code. I'm
also moving ogetkerninfo() to kern_xxx.c, because it belongs to the
class of compat system information system calls, not the generic sysctl
code.
In the existing code we didn't really enforce that callers hold Giant
before calling userland_sysctl(), even though there is no guarantee it
is safe. Fix this by just placing Giant locks around the call to the oid
handler. This also means we only pick up Giant for a very short period
of time. Maybe we should add MPSAFE flags to sysctl or phase it out all
together.
I've also added SYSCTL_LOCK_ASSERT(). We have to make sure sysctl_root()
and name2oid() are called with the sysctl lock held.
Reviewed by: Jille Timmermans <jille quis cx>
compare map->timestamp with saved timestamp after map read lock is
reacquired, not with saved timestamp + 1. The only consequence of the +1
was unconditional lookup of the next map entry, though.
Tested by: pho
Approved by: des
MFC after: 2 weeks
arrays under #ifndef XEN to make XEN config compile again.
In case of Xen vm_guest is hard coded.
Move the list for the vm_guest sysctl out of the restictive
bounds as the sysctl is there in either case.
invariants and approach for protocol switch methods in protsw_init(),
and also some KASSERT's for non-domain init entries in protocol
switch tables: pru_abort and pru_send must both be implemented.
For now, leave those assertions #if 0'd, since there are a few
protocols that violate them in non-harmful ways. Whether or not we
should enforce pru_abort being implemented for non-stream protocols
is an interesting question: currently abort is only invoked on stream
sockets in situations where un-accepted sockets must be abruptly
closed (i.e., close() on a listen socket with pending connections),
but in principle it is useful for datagram sockets and most datagram
socket types implement it.
MFC after: 3 weeks
looked up would have v_dd set to a non-NULL value. This fixes a panic
seen when running installworld on a diskless system with a separate /usr
file system.
Submitted by: cracauer
Approved by: kib
long commands into multiple requests. [08:12]
Avoid calling uninitialized function pointers in protocol switch
code. [08:13]
Merry Christmas everybody...
Approved by: so (cperciva)
Approved by: re (kensmith)
Security: FreeBSD-SA-08:12.ftpd, FreeBSD-SA-08:13.protosw
In r185891 I removed the newlines from messages written to /dev/console,
because it made startup messages from rc-scripts harder to read. This,
unfortunately, causes the kernel message that is printed after a
non-terminated log message to be concatenated.
This could be fixed, but on short term it's better to just revert the
change.
Reported by: Jaakko Heinonen <jh saunalahti fi>
Inside ptsdrv_{in,out}wakeup() we call KNOTE_LOCKED() to wake up any
kevent(2) users. Because the kqueue handlers are executed synchronously,
we must set PTS_FINISHED before calling ptsdrv_{in,out}wakeup().
Discovered by: nork
