The $ip6addrctl_policy is a variable to choose a pre-defined address
selection policy set by ip6addrctl(8).
The keyword "ipv4_prefer" sets IPv4-preferred one described in Section 10.3,
the keyword "ipv6_prefer" sets IPv6-preferred one in Section 2.1 in RFC 3484,
respectively. When "AUTO" is specified, it attempts to read
/etc/ip6addrctl.conf first. If it is found, it reads and installs it as
a policy table. If not, either of the two pre-defined policy tables is
chosen automatically according to $ipv6_activate_all_interfaces.
When $ipv6_activate_all_interfaces=NO, interfaces which have no corresponding
$ifconfig_IF_ipv6 is marked as IFDISABLED for security reason.
The default values are ip6addrctl_policy=AUTO and
ipv6_activate_all_interfaces=NO.
Discussed with: ume and bz
Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC),
lower memory usage than GNU grep, GNU compatibility,
BSD license.
TODO: Performance is somewhat behind GNU grep but it is only
significant for bigger searches. The reason is complex, the
most important factor is that GNU grep uses lots of
optimizations to improve the speed of the regex library.
First, we need a modern regex library (practically by adopting
TRE), add support for GNU-style non-standard regexes and then
reevalute the performance issues and look for bottlenecks. In
the meantime, for those, who need better performance, it is
possible to build GNU grep by setting WITH_GNU_GREP.
Approved by: delphij (mentor)
Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/),
freegrep (http://github.com/howardjp/freegrep)
Sponsored by: Google SoC 2008
Portbuild tests run by: kris, pav, erwin
Acknowledgements to: fjoe (as SoC 2008 mentor),
everyone who helped in reviewing and testing
Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kernel configurations must be
updated after this change to specify their architecture.
in Solaris 10 updates 141445-09 and 142901-14.
Detailed information:
(OpenSolaris revisions and Bug IDs, Solaris 10 patch numbers)
7844:effed23820ae
6755435 zfs_open() and zfs_close() needs to use ZFS_ENTER/ZFS_VERIFY_ZP (141445-01)
7897:e520d8258820
6748436 inconsistent zpool.cache in boot_archive could panic a zfs root filesystem upon boot-up (141445-01)
7965:b795da521357
6740164 zpool attach can create an illegal root pool (141909-02)
8084:b811cc60d650
6769612 zpool_import() will continue to write to cachefile even if altroot is set (N/A)
8121:7fd09d4ebd9c
6757430 want an option for zdb to disable space map loading and leak tracking (141445-01)
8129:e4f45a0bfbb0
6542860 ASSERT: reason != VDEV_LABEL_REMOVE||vdev_inuse(vd, crtxg, reason, 0) (141445-01)
8188:fd00c0a81e80
6761100 want zdb option to select older uberblocks (141445-01)
8190:6eeea43ced42
6774886 zfs_setattr() won't allow ndmp to restore SUNWattr_rw (141445-01)
8225:59a9961c2aeb
6737463 panic while trying to write out config file if root pool import fails (141445-01)
8227:f7d7be9b1f56
6765294 Refactor replay (141445-01)
8228:51e9ca9ee3a5
6572357 libzfs should do more to avoid mnttab lookups (141909-01)
6572376 zfs_iter_filesystems and zfs_iter_snapshots get objset stats twice (141909-01)
8241:5a60f16123ba
6328632 zpool offline is a bit too conservative (141445-01)
6739487 ASSERT: txg <= spa_final_txg due to scrub/export race (141445-01)
6767129 ASSERT: cvd->vdev_isspare, in spa_vdev_detach() (141445-01)
6747698 checksum failures after offline -t / export / import / scrub (141445-01)
6745863 ZFS writes to disk after it has been offlined (141445-01)
6722540 50% slowdown on scrub/resilver with certain vdev configurations (141445-01)
6759999 resilver logic rewrites ditto blocks on both source and destination (141445-01)
6758107 I/O should never suspend during spa_load() (141445-01)
6776548 codereview(1) runs off the page when faced with multi-line comments (N/A)
6761406 AMD errata 91 workaround doesn't work on 64-bit systems (141445-01)
8242:e46e4b2f0a03
6770866 GRUB/ZFS should require physical path or devid, but not both (141445-01)
8269:03a7e9050cfd
6674216 "zfs share" doesn't work, but "zfs set sharenfs=on" does (141445-01)
6621164 $SRC/cmd/zfs/zfs_main.c seems to have a syntax error in the translation note (141445-01)
6635482 i18n problems in libzfs_dataset.c and zfs_main.c (141445-01)
6595194 "zfs get" VALUE column is as wide as NAME (141445-01)
6722991 vdev_disk.c: error checking for ddi_pathname_to_dev_t() must test for NODEV (141445-01)
6396518 ASSERT strings shouldn't be pre-processed (141445-01)
8274:846b39508aff
6713916 scrub/resilver needlessly decompress data (141445-01)
8343:655db2375fed
6739553 libzfs_status msgid table is out of sync (141445-01)
6784104 libzfs unfairly rejects numerical values greater than 2^63 (141445-01)
6784108 zfs_realloc() should not free original memory on failure (141445-01)
8525:e0e0e525d0f8
6788830 set large value to reservation cause core dump (141445-01)
6791064 want sysevents for ZFS scrub (141445-01)
6791066 need to be able to set cachefile on faulted pools (141445-01)
6791071 zpool_do_import() should not enable datasets on faulted pools (141445-01)
6792134 getting multiple properties on a faulted pool leads to confusion (141445-01)
8547:bcc7b46e5ff7
6792884 Vista clients cannot access .zfs (141445-01)
8632:36ef517870a3
6798384 It can take a village to raise a zio (141445-01)
8636:7e4ce9158df3
6551866 deadlock between zfs_write(), zfs_freesp(), and zfs_putapage() (141909-01)
6504953 zfs_getpage() misunderstands VOP_GETPAGE() interface (141909-01)
6702206 ZFS read/writer lock contention throttles sendfile() benchmark (141445-01)
6780491 Zone on a ZFS filesystem has poor fork/exec performance (141445-01)
6747596 assertion failed: DVA_EQUAL(BP_IDENTITY(&zio->io_bp_orig), BP_IDENTITY(zio->io_bp))); (141445-01)
8692:692d4668b40d
6801507 ZFS read aggregation should not mind the gap (141445-01)
8697:e62d2612c14d
6633095 creating a filesystem with many properties set is slow (141445-01)
8768:dfecfdbb27ed
6775697 oracle crashes when overwriting after hitting quota on zfs (141909-01)
8811:f8deccf701cf
6790687 libzfs mnttab caching ignores external changes (141445-01)
6791101 memory leak from libzfs_mnttab_init (141445-01)
8845:91af0d9c0790
6800942 smb_session_create() incorrectly stores IP addresses (N/A)
6582163 Access Control List (ACL) for shares (141445-01)
6804954 smb_search - shortname field should be space padded following the NULL terminator (N/A)
6800184 Panic at smb_oplock_conflict+0x35() (N/A)
8876:59d2e67b4b65
6803822 Reboot after replacement of system disk in a ZFS mirror drops to grub> prompt (141445-01)
8924:5af812f84759
6789318 coredump when issue zdb -uuuu poolname/ (141445-01)
6790345 zdb -dddd -e poolname coredump (141445-01)
6797109 zdb: 'zdb -dddddd pool_name/fs_name inode' coredump if the file with inode was deleted (141445-01)
6797118 zdb: 'zdb -dddddd poolname inum' coredump if I miss the fs name (141445-01)
6803343 shareiscsi=on failed, iscsitgtd failed request to share (141445-01)
9030:243fd360d81f
6815893 hang mounting a dataset after booting into a new boot environment (141445-01)
9056:826e1858a846
6809691 'zpool create -f' no longer overwrites ufs infomation (141445-01)
9179:d8fbd96b79b3
6790064 zfs needs to determine uid and gid earlier in create process (141445-01)
9214:8d350e5d04aa
6604992 forced unmount + being in .zfs/snapshot/<snap1> = not happy (141909-01)
6810367 assertion failed: dvp->v_flag & VROOT, file: ../../common/fs/gfs.c, line: 426 (141909-01)
9229:e3f8b41e5db4
6807765 ztest_dsl_dataset_promote_busy needs to clean up after ENOSPC (141445-01)
9230:e4561e3eb1ef
6821169 offlining a device results in checksum errors (141445-01)
6821170 ZFS should not increment error stats for unavailable devices (141445-01)
6824006 need to increase issue and interrupt taskqs threads in zfs (141445-01)
9234:bffdc4fc05c4
6792139 recovering from a suspended pool needs some work (141445-01)
6794830 reboot command hangs on a failed zfs pool (141445-01)
9246:67c03c93c071
6824062 System panicked in zfs_mount due to NULL pointer dereference when running btts and svvs tests (141909-01)
9276:a8a7fc849933
6816124 System crash running zpool destroy on broken zpool (141445-03)
9355:09928982c591
6818183 zfs snapshot -r is slow due to set_snap_props() doing txg_wait_synced() for each new snapshot (141445-03)
9391:413d0661ef33
6710376 log device can show incorrect status when other parts of pool are degraded (141445-03)
9396:f41cf682d0d3 (part already merged)
6501037 want user/group quotas on ZFS (141445-03)
6827260 assertion failed in arc_read(): hdr == pbuf->b_hdr (141445-03)
6815592 panic: No such hold X on refcount Y from zfs_znode_move (141445-03)
6759986 zfs list shows temporary %clone when doing online zfs recv (141445-03)
9404:319573cd93f8
6774713 zfs ignores canmount=noauto when sharenfs property != off (141445-03)
9412:4aefd8704ce0
6717022 ZFS DMU needs zero-copy support (141445-03)
9425:e7ffacaec3a8
6799895 spa_add_spares() needs to be protected by config lock (141445-03)
6826466 want to post sysevents on hot spare activation (141445-03)
6826468 spa 'allowfaulted' needs some work (141445-03)
6826469 kernel support for storing vdev FRU information (141445-03)
6826470 skip posting checksum errors from DTL regions of leaf vdevs (141445-03)
6826471 I/O errors after device remove probe can confuse FMA (141445-03)
6826472 spares should enjoy some of the benefits of cache devices (141445-03)
9443:2a96d8478e95
6833711 gang leaders shouldn't have to be logical (141445-03)
9463:d0bd231c7518
6764124 want zdb to be able to checksum metadata blocks only (141445-03)
9465:8372081b8019
6830237 zfs panic in zfs_groupmember() (141445-03)
9466:1fdfd1fed9c4
6833162 phantom log device in zpool status (141445-03)
9469:4f68f041ddcd
6824968 add ZFS userquota support to rquotad (141445-03)
9470:6d827468d7b5
6834217 godfather I/O should reexecute (141445-03)
9480:fcff33da767f
6596237 Stop looking and start ganging (141909-02)
9493:9933d599bc93
6623978 lwb->lwb_buf != NULL, file ../../../uts/common/fs/zfs/zil.c, line 787, function zil_lwb_commit (141445-06)
9512:64cafcbcc337
6801810 Commit of aligned streaming rewrites to ZIL device causes unwanted disk reads (N/A)
9515:d3b739d9d043
6586537 async zio taskqs can block out userland commands (142901-09)
9554:787363635b6a
6836768 zfs_userspace() callback has no way to indicate failure (N/A)
9574:1eb6a6ab2c57
6838062 zfs panics when an error is encountered in space_map_load() (141909-02)
9583:b0696cd037cc
6794136 Panic BAD TRAP: type=e when importing degraded zraid pool. (141909-03)
9630:e25a03f552e0
6776104 "zfs import" deadlock between spa_unload() and spa_async_thread() (141445-06)
9653:a70048a304d1
6664765 Unable to remove files when using fat-zap and quota exceeded on ZFS filesystem (141445-06)
9688:127be1845343
6841321 zfs userspace / zfs get userused@ doesn't work on mounted snapshot (N/A)
6843069 zfs get userused@S-1-... doesn't work (N/A)
9873:8ddc892eca6e
6847229 assertion failed: refcount_count(&tx->tx_space_written) + delta <= tx->tx_space_towrite in dmu_tx.c (141445-06)
9904:d260bd3fd47c
6838344 kernel heap corruption detected on zil while stress testing (141445-06)
9951:a4895b3dd543
6844900 zfs_ioc_userspace_upgrade leaks (N/A)
10040:38b25aeeaf7a
6857012 zfs panics on zpool import (141445-06)
10000:241a51d8720c
6848242 zdb -e no longer works as expected (N/A)
10100:4a6965f6bef8
6856634 snv_117 not booting: zfs_parse_bootfs: error2 (141445-07)
10160:a45b03783d44
6861983 zfs should use new name <-> SID interfaces (N/A)
6862984 userquota commands can hang (141445-06)
10299:80845694147f
6696858 zfs receive of incremental replication stream can dereference NULL pointer and crash (N/A)
10302:a9e3d1987706
6696858 zfs receive of incremental replication stream can dereference NULL pointer and crash (fix lint) (N/A)
10575:2a8816c5173b (partial merge)
6882227 spa_async_remove() shouldn't do a full clear (142901-14)
10800:469478b180d9
6880764 fsync on zfs is broken if writes are greater than 32kb on a hard crash and no log attached (142901-09)
6793430 zdb -ivvvv assertion failure: bp->blk_cksum.zc_word[2] == dmu_objset_id(zilog->zl_os) (N/A)
10801:e0bf032e8673 (partial merge)
6822816 assertion failed: zap_remove_int(ds_next_clones_obj) returns ENOENT (142901-09)
10810:b6b161a6ae4a
6892298 buf->b_hdr->b_state != arc_anon, file: ../../common/fs/zfs/arc.c, line: 2849 (142901-09)
10890:499786962772
6807339 spurious checksum errors when replacing a vdev (142901-13)
11249:6c30f7dfc97b
6906110 bad trap panic in zil_replay_log_record (142901-13)
6906946 zfs replay isn't handling uid/gid correctly (142901-13)
11454:6e69bacc1a5a
6898245 suspended zpool should not cause rest of the zfs/zpool commands to hang (142901-10)
11546:42ea6be8961b (partial merge)
6833999 3-way deadlock in dsl_dataset_hold_ref() and dsl_sync_task_group_sync() (142901-09)
Discussed with: pjd
Approved by: delphij (mentor)
Obtained from: OpenSolaris (multiple Bug IDs)
MFC after: 2 months
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.
Supported by: Bitgravity Inc.
Discussed with: alc, jeffr, and kib
are some problems with static executables), make.conf (would also
affect ports which do not use GNU make and do not override the
compile targets) or in the kernel config (via "makeoptions
WITH_CTF=yes").
Additional (related) changes:
- propagate WITH_CTF to module builds
- do not add -g to the linker flags, it's a noop there anyway
(at least according to the man page of ld)
- do not add -g to CFLAGS unconditionally
we need to have a look if it is really needed (IMO not) or if there
is a way to add it only when WITH_CTF is used
Note: ctfconvert / ctfmerge lines will not appear in the build output,
to protect the innocent (those which do not build with WITH_CTF would
see the shell-test and may think WITH_CTF is used).
Reviewed by: imp, jhb, scottl (earlier version)
Discussed on: arch@
for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32
option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts
of the kernel and enhances the freebsd32 compatibility code to support
big-endian platforms.
Reviewed by: kib, jhb
This utility allows users to convert their wtmp databases to the new
format. It makes no sense for users to keep their wtmp log files if they
are unable to view them.
It basically copies ut_line into ut_id as well. This makes it possible
for last(1) and ac(8) to match login records with their corresponding
logout record.
While the name is pretentious, a good explanation of its targets is
reported in this 17 months old presentation e-mail:
http://lists.freebsd.org/pipermail/freebsd-arch/2008-August/008452.html
In order to implement it, the sq_type in sleepqueues is mandatory and not
only compiled along with INVARIANTS option. Additively, a new sleepqueue
function, sleepq_type() is added, returning the type of the sleepqueue
linked to a wchan.
Three new sysctls are added in order to configure the thread:
debug.deadlkres.slptime_threshold
debug.deadlkres.blktime_threshold
debug.deadlkres.sleepfreq
rappresenting the thresholds for sleep and block time that will lead to
a deadlock matching (when exceeded), while the sleepfreq rappresents the
number of seconds between 2 consecutive thread runnings.
In order to enable the deadlock resolver thread recompile your kernel
with the option DEADLKRES.
Reviewed by: jeff
Tested by: pho, Giovanni Trematerra
Sponsored by: Nokia Incorporated, Sandvine Incorporated
MFC after: 2 weeks
Right now syscons(4) uses a cons25-style terminal emulator. The
disadvantages of that are:
- Little compatibility with embedded devices with serial interfaces.
- Bad bandwidth efficiency, mainly because of the lack of scrolling
regions.
- A very hard transition path to support for modern character sets like
UTF-8.
Our terminal emulation library, libteken, has been supporting
xterm-style terminal emulation for months, so flip the switch and make
everyone use an xterm-style console driver.
I still have to enable this on i386. Right now pc98 and i386 share the
same /etc/ttys file. I'm not going to switch pc98, because it uses its
own Kanji-capable cons25 emulator.
IMPORTANT: What to do if things go wrong (i.e. graphical artifacts):
- Run the application inside script(1), try to reduce the problem and
send me the log file.
- In the mean time, you can run `vidcontrol -T cons25' and `export
TERM=cons25' so you can run applications the same way you did before.
You can also build your kernel with `options TEKEN_CONS25' to make all
virtual terminals use the cons25 emulator by default.
Discussed on: current@
re-add $ipv6_enable support for backward compatibility. From
UPDATING:
1. To use IPv6, simply define $ifconfig_IF_ipv6 like $ifconfig_IF
for IPv4. For aliases, $ifconfig_IF_aliasN should be used.
Note that both variables need the "inet6" keyword at the head.
Do not set $ipv6_network_interfaces manually if you do not
understand what you are doing. It is not needed in most cases.
$ipv6_ifconfig_IF and $ipv6_ifconfig_IF_aliasN still work, but
they are obsolete.
2. $ipv6_enable is obsolete. Use $ipv6_prefer and/or
"inet6 accept_rtadv" keyword in ifconfig(8) instead.
If you define $ipv6_enable=YES, it means $ipv6_prefer=YES and
all configured interfaces have "inet6 accept_rtadv" in the
$ifconfig_IF_ipv6. These are for backward compatibility.
3. A new variable $ipv6_prefer has been added. If NO, IPv6
functionality of interfaces with no corresponding
$ifconfig_IF_ipv6 is disabled by using "inet6 ifdisabled" flag,
and the default address selection policy of ip6addrctl(8)
is the IPv4-preferred one (see rc.d/ip6addrctl for more details).
Note that if you want to configure IPv6 functionality on the
disabled interfaces after boot, first you need to clear the flag by
using ifconfig(8) like:
ifconfig em0 inet6 -ifdisabled
If YES, the default address selection policy is set as
IPv6-preferred.
The default value of $ipv6_prefer is NO.
4. If your system need to receive Router Advertisement messages,
define "inet6 accept_rtadv" in $ifconfig_IF_ipv6. The rc(8)
scripts automatically invoke rtsol(8) when the interface becomes
UP. The Router Advertisement messages are used for SLAAC
(State-Less Address AutoConfiguration).
df(1) and mount(8) output. This is a bit smilar to OpenSolaris and follows
ZFS route of not listing snapshots by default with 'zfs list' command.
- Add UPDATING entry to note that ZFS snapshots are no longer visible in
mount(8) and df(1) output by default.
Reviewed by: kib
MFC after: 3 days
o remove all entries before RELENG_7 was branched, as is tradition[*].
o Update examples... nobody cares about 5.x upgrades.
o minor format tweaking in a few places.
o update copyright (although at best I hold an editors copyright these days).
o Remove giving people permission to buy me beer. I don't do enough for
this document for that anymore...
has proven to have a good effect when entering KDB by using a NMI,
but it completely violates all the good rules about interrupts
disabled while holding a spinlock in other occasions. This can be the
cause of deadlocks on events where a normal IPI_STOP is expected.
* Adds an new IPI called IPI_STOP_HARD on all the supported architectures.
This IPI is responsible for sending a stop message among CPUs using a
privileged channel when disponible. In other cases it just does match a
normal IPI_STOP.
Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64
architectures, while on the other has a normal IPI_STOP effect. It is
responsibility of maintainers to eventually implement an hard stop
when necessary and possible.
* Use the new IPI facility in order to implement a new userend SMP kernel
function called stop_cpus_hard(). That is specular to stop_cpu() but
it does use the privileged channel for the stopping facility.
* Let KDB use the newly introduced function stop_cpus_hard() and leave
stop_cpus() for all the other cases
* Disable interrupts on CPU0 when starting the process of APs suspension.
* Style cleanup and comments adding
This patch should fix the reboot/shutdown deadlocks many users are
constantly reporting on mailing lists.
Please don't forget to update your config file with the STOP_NMI
option removal
Reviewed by: jhb
Tested by: pho, bz, rink
Approved by: re (kib)
preparation for 8.0-RELEASE. Add the previous version of those
libraries to ObsoleteFiles.inc and bump __FreeBSD_Version.
Reviewed by: kib
Approved by: re (rwatson)
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
the TCP syncache. This returns struct tcpopt to being private within the TCP
implementation, thus allowing it to be modified without ABI concerns.
The patch breaks the ABI. Bump __FreeBSD_version to 800103 accordingly. The cxgb
driver is the only TOE consumer affected by this change, and needs to be
recompiled along with the kernel.
Suggested by: rwatson
Reviewed by: rwatson, kmacy
Approved by: re (kensmith), kensmith (mentor temporarily unavailable)
back to the 8 branch:
tcp_var.h
- struct sackhint
- struct tcpcb
- struct tcpstat
The patch breaks the ABI. Bump __FreeBSD_version to 800102 accordingly. User
space tools that rely on the size of any of these structs (e.g. sockstat) need
to be recompiled.
Reviewed by: rpaulo, sam, andre, rwatson
Approved by: re & mentor (gnn)
little purpose and are unused in the base system.
The IOCTL functionality is entirely duplicated and routing sockets
provide a richer interface than the kqueue functionality.
Further, it is not practical for these devices to be made sensible in
the face of VIMAGE.
Bump __FreeBSD_version on the off chance that there is any code out
there that actually uses this stuff.
Reviewed by: rwatson
Discussed with: bz, zec
Approved by: re@ (kensmith)
FreeBSD docset during 'make release' this will speed up release
builds;
- sysinstall(8) has also been updated to use these packages with a new
menu allowing people to choose what localized doc to install;
- mention in UPDATING that docs from the FreeBSD Documentation project
are now installed in /usr/local/share/doc/freebsd instead of
/usr/share/doc.
Approved by: re (kensmith)
require COMPAT_FREEBSD7. Also, explicitly note in NOTES that any version
of COMPAT_FREEBSD<n> effectively requires for newer binaries (i.e.
COMPAT_FREEBSD<n+1>, etc.). While this has been true in practice
previously, it used to compile ok before the commit earlier this week.
Discussed with: peter
Approved by: re (kensmith)
Vimage module, which had been there already but now is stateful.
All variables are now file local; so this further limits the global
spreading of routing related things throughout the kernel.
Add a missing function local variable in case of MPATHing.
Reviewed by: zec
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
network stack when reentering the inbound path from netgraph, and
force queueing of mbufs at the outbound netgraph node.
The mechanism relies on two components. First, in netgraph nodes
where outbound path of the network stack calls into netgraph, the
current thread has to be appropriately marked using the new
NG_OUTBOUND_THREAD_REF() macro before proceeding to call further
into the netgraph topology, and unmarked using the
NG_OUTBOUND_THREAD_UNREF() macro before returning to the caller.
Second, netgraph nodes which can potentially reenter the network
stack in the inbound path have to mark their inbound hooks using
NG_HOOK_SET_TO_INBOUND() macro. The netgraph framework will then
detect when there is a danger of a call graph looping back from
outbound to inbound path via netgraph, and defer handing off the
mbufs to the "inbound" node to a worker thread with a clean stack.
In this first pass only the most obvious netgraph nodes have been
updated to ensure no outbound to inbound calls can occur. Nodes
such as ng_ipfw, ng_gif etc. should be further examined whether a
potential for outbound to inbound call looping exists.
This commit changes the layout of struct thread, but due to
__FreeBSD_version number shortage a version bump has been omitted
at this time, nevertheless kernel and modules have to be rebuilt.
Reviewed by: julian, rwatson, bz
Approved by: julian (mentor)
Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state. The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.
While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers. Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.
Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels. Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.
Bump __FreeBSD_version to 800097.
Reviewed by: bz, julian
Approved by: rwatson, kib (re), julian (mentor)
Some time ago Tom Rhodes sent me an email that he was willing to perform
various cleanups to the window(1) source code. After some discussion, we
both decided the best thing to do, was to move window(1) to the ports
tree. The application isn't used a lot nowadays, mainly because it has
been superseeded by screen, tmux, etc.
A couple of hours ago Tom committed window(1) to ports (misc/window), so
I'm removing it from the tree. I don't think people will really miss it,
but I'm describing the change in UPDATING anyway.
Discussed with: trhodes, pav, kib
Approved by: re
an accessor function to get the correct rnh pointer back.
Update netstat to get the correct pointer using kvm_read()
as well.
This not only fixes the ABI problem depending on the kernel
option but also permits the tunable to overwrite the kernel
option at boot time up to MAXFIBS, enlarging the number of
FIBs without having to recompile. So people could just use
GENERIC now.
Reviewed by: julian, rwatson, zec
X-MFC: not possible
Introduce for this operation the reverse NO_ADAPTIVE_SX option.
The flag SX_ADAPTIVESPIN to be passed to sx_init_flags(9) gets suppressed
and the new flag, offering the reversed logic, SX_NOADAPTIVE is added.
Additively implements adaptive spininning for sx held in shared mode.
The spinning limit can be handled through sysctls in order to be tuned
while the code doesn't reach the release, after which time they should
be dropped probabilly.
This change has made been necessary by recent benchmarks where it does
improve concurrency of workloads in presence of high contention
(ie. ZFS).
KPI breakage is documented by __FreeBSD_version bumping, manpage and
UPDATING updates.
Requested by: jeff, kmacy
Reviewed by: jeff
Tested by: pho
by creating a child jail, which is visible to that jail and to any
parent jails. Child jails may be restricted more than their parents,
but never less. Jail names reflect this hierarchy, being MIB-style
dot-separated strings.
Every thread now points to a jail, the default being prison0, which
contains information about the physical system. Prison0's root
directory is the same as rootvnode; its hostname is the same as the
global hostname, and its securelevel replaces the global securelevel.
Note that the variable "securelevel" has actually gone away, which
should not cause any problems for code that properly uses
securelevel_gt() and securelevel_ge().
Some jail-related permissions that were kept in global variables and
set via sysctls are now per-jail settings. The sysctls still exist for
backward compatibility, used only by the now-deprecated jail(2) system
call.
Approved by: bz (mentor)
to optionally have overlapping unit numbers if attached in different
vnets.
At this stage if_loop is the only clonable ifnet class that has been
extended to allow for such overlapping allocation of unit numbers, i.e.
in each vnet it is possible to have a lo0 interface. Other clonable ifnet
classes remain to operate with traditional semantics, i.e. each instance
of a clonable ifnet will be assigned a globally unique unit number,
regardless in which vnet such an ifnet becomes instantiated.
While here, garbage collect unused _lo_list field in struct vnet_net,
as well as improve indentation for #defines in sys/net/vnet.h.
The layout of struct vnet_net has changed, therefore bump
__FreeBSD_version.
This change has no functional impact on nooptions VIMAGE kernel builds.
Reviewed by: bz, brooks
Approved by: julian (mentor)
Upgrade of the tzcode from 2004a to 2009e.
Changes are numerous, but include...
- New format of the output of zic, which supports both 32 and 64
bit time_t formats.
- zdump on 64 bit platforms will actually produce some output instead
of doing nothing for a looooooooong time.
- linux_base-fX, with X >= at least 8, will work without problems related
to the local time again.
The original patch, based on the 2008e, has been running for a long
time on both my laptop and desktop machine and have been tested by
other people.
After the installation of this code and the running of zic(8), you
need to run tzsetup(8) again to install the new datafile.
Approved by: wollman@ for usr.sbin/zic
MFC after: 1 month
active network stack instance. Turning on options VIMAGE at compile
time yields the following changes relative to default kernel build:
1) V_ accessor macros for virtualized variables resolve to structure
fields via base pointers, instead of being resolved as fields in global
structs or plain global variables. As an example, V_ifnet becomes:
options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet
default build: vnet_net_0._ifnet
options VIMAGE_GLOBALS: ifnet
2) INIT_VNET_* macros will declare and set up base pointers to be used
by V_ accessor macros, instead of resolving to whitespace:
INIT_VNET_NET(ifp->if_vnet); becomes
struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET];
3) Memory for vnet modules registered via vnet_mod_register() is now
allocated at run time in sys/kern/kern_vimage.c, instead of per vnet
module structs being declared as globals. If required, vnet modules
can now request the framework to provide them with allocated bzeroed
memory by filling in the vmi_size field in their vmi_modinfo structures.
4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are
extended to hold a pointer to the parent vnet. options VIMAGE builds
will fill in those fields as required.
5) curvnet is introduced as a new global variable in options VIMAGE
builds, always pointing to the default and only struct vnet.
6) struct sysctl_oid has been extended with additional two fields to
store major and minor virtualization module identifiers, oid_v_subs and
oid_v_mod. SYSCTL_V_* family of macros will fill in those fields
accordingly, and store the offset in the appropriate vnet container
struct in oid_arg1.
In sysctl handlers dealing with virtualized sysctls, the
SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target
variable and make it available in arg1 variable for further processing.
Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have
been deleted.
Reviewed by: bz, rwatson
Approved by: julian (mentor)
import from p4 bms_netdev. Summary of changes:
* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.
NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.
This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.
- add show as alias for get
- add weights to allow mpath to do more than equal cost
- add sticky / nostick to disable / re-enable per-connection load balancing
This adds a field to rt_metrics_lite so network bits of world will need to be re-built.
Reviewed by: jeli & qingli
driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and
contained no logic, the default interface is now libusb (supported by sane).
Reviewed by: HPS
This is purely a forwarding plane cleanup; no control plane
code is involved.
Summary:
* Split IPv4 and IPv6 MROUTING support. The static compile-time
kernel option remains the same, however, the modules may now
be built for IPv4 and IPv6 separately as ip_mroute_mod and
ip6_mroute_mod.
* Clean up the IPv4 multicast forwarding code to use BSD queue
and hash table constructs. Don't build our own timer abstractions
when ratecheck() and timevalclear() etc will do.
* Expose the multicast forwarding cache (MFC) and virtual interface
table (VIF) as sysctls, to reduce netstat's dependence on libkvm
for this information for running kernels.
* bandwidth meters however still require libkvm.
* Make the MFC hash table size a boot/load-time tunable ULONG,
net.inet.ip.mfchashsize (defaults to 256).
* Remove unused members from struct vif and struct mfc.
* Kill RSVP support, as no current RSVP implementation uses it.
These stubs could be moved to raw_ip.c.
* Don't share locks or initialization between IPv4 and IPv6.
* Don't use a static struct route_in6 in ip6_mroute.c.
The v6 code is still using a cached struct route_in6, this is
moved to mif6 for the time being.
* More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c.
v4 path tested using ports/net/mcast-tools.
v6 changes are mostly mechanical locking and *have not* been tested.
As these changes partially break some kernel ABIs, they will not
be MFCed. There is a lot more work to be done here.
Reviewed by: Pavlin Radoslavov
IPv4 stack.
Diffs are minimized against p4.
PCS has been used for some protocol verification, more widespread
testing of recorded sources in Group-and-Source queries is needed.
sizeof(struct igmpstat) has changed.
__FreeBSD_version is bumped to 800070.
ports tree so that programs use libusb from the base by default. Thanks to
Stanislav Sedov for sorting out the ports build.
Bump __FreeBSD_version to 800069
Help and testing by: stas
memory from int to size_t. Implement a workaround for current ABI not
allowing to properly save size for and report more then 2Gb sized segment
of shared memory.
This makes it possible to use > 2 Gb shared memory segments on 64bit
architectures. Please note the new BUGS section in shmctl(2) and
UPDATING note for limitations of this temporal solution.
Reviewed by: csjp
Tested by: Nikolay Dzham <i levsha org ua>
MFC after: 2 weeks
from the inet6 stack along with statistics and make sure we
properly free the rt in all cases.
While the current situation is not better performance wise it
prevents panics seen more often these days.
After more inet6 and ipsec cleanup we should be able to improve
the situation again passing the rt to ip6_forward directly.
Leave the ip6_forward_rt entry in struct vinet6 but mark it
for removal.
PR: kern/128247, kern/131038
MFC after: 25 days
Committed from: Bugathon #6
Tested by: Denis Ahrens <denis@h3q.com> (different initial version)
The new behaviour is on by default, and can be disabled by setting the
net.inet.tcp.rfc3465 sysctl to 0 to obtain previous behaviour.
The patch changes struct tcpcb in sys/netinet/tcp_var.h which breaks
the ABI. Bump __FreeBSD_version to 800061 accordingly. User space tools
that rely on the size of struct tcpcb (e.g. sockstat) need to be recompiled.
Reviewed by: rpaulo, gnn
Approved by: gnn, kmacy (mentors)
Sponsored by: FreeBSD Foundation
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
module; the ath module now brings in the hal support. Kernel
config files are almost backwards compatible; supplying
device ath_hal
gives you the same chip support that the binary hal did but you
must also include
options AH_SUPPORT_AR5416
to enable the extended format descriptors used by 11n parts.
It is now possible to control the chip support included in a
build by specifying exactly which chips are to be supported
in the config file; consult ath_hal(4) for information.
and ifnet functions
- add memory barriers to <machine/atomic.h>
- update drivers to only conditionally define their own
- add lockless producer / consumer ring buffer
- remove ring buffer implementation from cxgb and update its callers
- add if_transmit(struct ifnet *ifp, struct mbuf *m) to ifnet to
allow drivers to efficiently manage multiple hardware queues
(i.e. not serialize all packets through one ifq)
- expose if_qflush to allow drivers to flush any driver managed queues
This work was supported by Bitgravity Inc. and Chelsio Inc.
This should fix q_time overflow, which happens after 2^32/(86400*hz) days of
uptime (~50days for hz = 1000).
q_time overflow cause following:
- traffic shaping may not work in 'fast' mode (not enabled by default).
- incorrect average queue length calculation in RED/GRED algorithm.
NB: due to ABI change this change is not applicable to stable.
PR: kern/128401
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
It turns out I forgot to mention that people really need to make sure
their hints are up to date if they are updating a system through the
serial console.
Requested by: gavin
Reviewed by: gavin
The uart(4) driver has the advantage of supporting a wider variety of
hardware on a greater amount of platforms. This driver has already been
the standard on platforms such as ia64, powerpc and sparc64.
I've decided not to change anything on pc98. I'd rather let people from
the pc98 team look at this.
Approved by: philip (mentor), marcel
parts relied on the now removed NET_NEEDS_GIANT.
Most of I4B has been disconnected from the build
since July 2007 in HEAD/RELENG_7.
This is what was removed:
- configuration in /etc/isdn
- examples
- man pages
- kernel configuration
- sys/i4b (drivers, layers, include files)
- user space tools
- i4b support from ppp
- further documentation
Discussed with: rwatson, re
to rc.conf(5) to remind people where to look for all the details.
People without network connectivity forget basics like this... This
is in keeping with historic UPDATING entries which try to provide
basic information in the entry, and a pointer to more extensive
information documenting the new thing.
commands can be written to /dev/psm%d and status can be read back from it.
- Reflect the change in psm(4) and bump version for ports.
MFC after: 1 week
structure. This allows per-CPU variations of struct pmap on a
single architecture without affecting the machine-independent
fields. As such, the PMAP variations don't affect the ABI. They
become part of it.
historical relic, and are no longer appropriate for either LAN or WAN
mounting. At modern (gigabit and 10 gigabit) LAN speeds packet loss
from socket buffer fill events is common, and sequence numbers wrap
quickly enough that data corruption is possible. TCP solves both of
these problems without imposing significant overhead.
MFC after: 1 month
