As part of this, install the tests(7) manual page unconditionally (not only
when WITH_TESTS=yes) so that users that have not yet enabled the build of
the test suite can read details on how to do so.
variables. These are intended to allow bypassing the
'svn co /usr/{src,doc,ports}' step in the chroot when the
tree exists from external means.
The use case here is that /usr/src, /usr/doc, and /usr/ports
in the chroot exist as result of zfs dataset clones, so it
is possible (and happens quite often) that the included
distributions may not be consistent. (This is not the case
for -RELEASE builds, but does happen for snapshot builds.)
Tested on: stable/9@r264319
MFC After: 3 days
Sponsored by: The FreeBSD Foundation
This code was heavily broken few months ago during CAM locking changes.
Fixing it would require almost complete rewrite. Since there are no
known devices on market using this interface younger then ~15 years, and
they are CD, not even DVD, I don't see much reason to rewrite it.
This change does not mean those devices won't work. They will just work
slower due to inefficient disks load/unload schedule if several LUNs
accessed same time.
Discussed with: ken@
Silence on: scsi@, hardware@
MFC after: 1 week
other modes supported by the FTDI serial adapter chips.
In addition to adding the new ioctls, this change removes all the code
that reset the chip at attach and open/close time, and also the code
that turned on RTS/CTS flow control on open without any permission to do
so (that was just always a bug in the driver).
When FTDI chips are configured as GPIO or MPSSE or other special-purpose
uses by an attached serial eeprom, the chip will power on with certain
pins driven or floating, and it's important that the driver not do
anything to the chip to perturb that unless it receives a specific
command to do so. When used for "plain old serial comms" the chip
powers on into the right mode and never needs to be reset while it's
running to operate properly, so this change is transparent to most users.
when WITH_COMPRESSED_IMAGES is used.
Requested by: delphij, brooks, Nikolai Lifanov
MFC After: 1 week
X-MFC-With: r264027,r264028,r264029,r264030
Sponsored by: The FreeBSD Foundation
When set to a non-empty value, the installation medium is
compressed with gzip(1) as part of the 'install' target in
the release/ directory.
With gzip(1) compression, downloadable image are reduced in
size quite significantly. Build test against head@263927
shows the following:
bootonly.iso: 64% smaller
disc1.iso: 44% smaller
memstick.img: 47% smaller
mini-memstick.img: 65% smaller
dvd1.iso: untested
This option is off by default, I would eventually like to
turn it on by default, and remove the '-k' flag to gzip(1)
so only compressed images are published on FTP.
Requested by: wkoszek
MFC After: 1 week
Sponsored by: The FreeBSD Foundation
The ADC has a 12bit resolution and its raw output can be read via sysctl(8)
interface.
The driver allows the setup of ADC clock, samples average and open delay
(the number of clock cycles to wait before start the conversion).
The TSC_ADC module is set in the general purpose mode (no touchscreen
support).
Tested on Beaglebone-black.
Written based on AM335x TRM.
Reviewed by: rpaulo
Approved by: adrian (mentor)
Tested by: me, Brian J. McGovern, Sulev-Madis Silber (ketas)
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
Added a section on test suite configuration, and cleaned up up
grammar errors and awkward prose. The config variables were
discussed on freebsd-testing.
Discussed with: Garrett Cooper, jmmv
MFC after: 2 weeks
Sponsored by: Spectra Logic Corporation
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."
This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.
Sponsored by: The FreeBSD Foundation
Fix logic error in the description of counter_u64_alloc: the command
may fail only if M_NOWAIT is specified, not M_WAITOK.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Spectra Logic Corporation
As a prerequisite for multiple queues, the guest must have MSIX enabled.
Unfortunately, to work around device passthrough bugs, FreeBSD disables
MSIX when running as a VMWare guest due to the hw.pci.honor_msi_blacklist
tunable; this tunable must be disabled for multiple queues.
Also included is various minor changes from the projects/vmxnet branch.
MFC after: 1 month
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
for FreeBSD standards. Very little, if any, content was
modified.
These are not yet linked to the build.
Submitted by: Abhishek Gupta (abgupta!microsoft dot com)
Sponsored by: The FreeBSD Foundation
