Currently, PCB caching mechanism relies on the rib generation
counter (rnh_gen) to invalidate cached nhops/LLE entries.
With certain fib algorithms, it is now possible that the
datapath lookup state applies RIB changes with some delay.
In that scenario, PCB cache will invalidate on the RIB change,
but the new lookup may result in the same nexthop being returned.
When fib algo finally gets in sync with the RIB changes, PCB cache
will not receive any notification and will end up caching the stale data.
To fix this, introduce additional counter, rnh_gen_rib, which is used
only when FIB_ALGO is enabled.
This counter is incremented by the control plane. Each time when fib algo
synchronises with the RIB, it updates rnh_gen to the current rnh_gen_rib value.
Differential Revision: https://reviews.freebsd.org/D29812
Reviewed by: donner
MFC after: 2 weeks
Fib algo uses a per-family array indexed by the fibnum to store
lookup function pointers and per-fib data.
Each algorithm rebuild currently requires re-allocating this array
to support atomic change of two pointers.
As in reality most of the changes actually involve changing only
data pointer, add a shortcut performing in-flight pointer update.
MFC after: 2 weeks
Some algorithms may require updating datapath and control plane
algo pointers after the (batched) updates.
Export fib_set_datapath_ptr() to allow setting the new datapath
function or data pointer from the algo.
Add fib_set_algo_ptr() to allow updating algo control plane
pointer from the algo.
Add fib_epoch_call() epoch(9) wrapper to simplify freeing old
datapath state.
Reviewed by: zec
Differential Revision: https://reviews.freebsd.org/D29799
MFC after: 1 week
Initial fib algo implementation was build on a very simple set of
principles w.r.t updates:
1) algorithm is ether able to apply the change synchronously (DIR24-8)
or requires full rebuild (bsearch, lradix).
2) framework falls back to rebuild on every error (memory allocation,
nhg limit, other internal algo errors, etc).
This changes brings the new "intermediate" concept - batched updates.
Algotirhm can indicate that the particular update has to be handled in
batched fashion (FLM_BATCH).
The framework will write this update and other updates to the temporary
buffer instead of pushing them to the algo callback.
Depending on the update rate, the framework will batch 50..1024 ms of updates
and submit them to a different algo callback.
This functionality is handy for the slow-to-rebuild algorithms like DXR.
Differential Revision: https://reviews.freebsd.org/D29588
Reviewed by: zec
MFC after: 2 weeks
The intent is to better handle time intervals with large amount of RIB
updates (e.g. BGP peer going up or down), while still keeping low sync
delay for the rest scenarios.
The implementation is the following: updates are bucketed into the
buckets of size 50ms. If the number of updates within a current bucket
exceeds the threshold of 500 routes/sec (e.g. 10 updates per bucket
interval), the update is delayed for another 50ms. This can be repeated
until the maximum update delay (1 sec) is reached.
All 3 variables are runtime tunables:
* net.route.algo.fib_max_sync_delay_ms: 1000
* net.route.algo.bucket_change_threshold_rate: 500
* net.route.algo.bucket_time_ms: 50
Differential Review: https://reviews.freebsd.org/D29588
MFC after: 2 weeks
The current code has the limit of 127 nexthop groups due to the
wrongly-checked bitmask_copy() return value.
PR: 254303
Reported by: Aleks <a.ivanov at veesp.com>
MFC after: 1 day
`struct weightened_nhop` has spare 32bit between the fields due to
the alignment (on amd64).
Not zeroing these spare bits results in duplicating nhop groups
in the kernel due to the way how comparison works.
MFC after: 1 day
In case with batch route delete via rib_walk_del(), when
some paths from the multipath route gets deleted, old
multipath group were not freed.
PR: 254496
Reported by: Zhenlei Huang <zlei.huang@gmail.com>
MFC after: 1 day
Summary:
This fixes rtentry leak for the cloned interfaces created inside the
VNET.
PR: 253998
Reported by: rashey at superbox.pl
MFC after: 3 days
Loopback teardown order is `SI_SUB_INIT_IF`, which happens after `SI_SUB_PROTO_DOMAIN` (route table teardown).
Thus, any route table operations are too late to schedule.
As the intent of the vnet teardown procedures to minimise the amount of effort by doing global cleanups instead of per-interface ones, address this by adding a relatively light-weight routing table cleanup function, `rib_flush_routes()`.
It removes all remaining routes from the routing table and schedules the deletion, which will happen later, when `rtables_destroy()` waits for the current epoch to finish.
Test Plan:
```
set_skip:set_skip_group_lo -> passed [0.053s]
tail -n 200 /var/log/messages | grep rtentry
```
Reviewers: #network, kp, bz
Reviewed By: kp
Subscribers: imp, ae
Differential Revision: https://reviews.freebsd.org/D29116
The routing stack control depends on quite a tree of functions to
determine the proper attributes of a route such as a source address (ifa)
or transmit ifp of a route.
When actually inserting a route, the stack needs to ensure that ifa and ifp
points to the entities that are still valid.
Validity means slightly more than just pointer validity - stack need guarantee
that the provided objects are not scheduled for deletion.
Currently, callers either ignore it (most ifp parts, historically) or try to
use refcounting (ifa parts). Even in case of ifa refcounting it's not always
implemented in fully-safe manner. For example, some codepaths inside
rt_getifa_fib() are referencing ifa while not holding any locks, resulting in
possibility of referencing scheduled-for-deletion ifa.
Instead of trying to fix all of the callers by enforcing proper refcounting,
switch to a different model.
As the rib_action() already requires epoch, do not require any stability guarantees
other than the epoch-provided one.
Use newly-added conditional versions of the refcounting functions
(ifa_try_ref(), if_try_ref()) and fail if any of these fails.
Reviewed by: donner
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28837
The case of adding interface route by specifying interface
address as the gateway was missed during code refactoring.
Re-add it back by copying non-AF_LINK gateway data when RTF_GATEWAY
is not set.
Reviewed by: donner
MFC after: 3 days
ROUTE_MPATH was added to the GENERIC kernel in r368648.
According to the plan in D27428, it was enabled with `net.route.multipath` sysctl set to 0.
Given enough time has passed, this change enables route multipath by default.
The goal is to ship FreeBSD 13 with multipath turned on.
Reviewed By: donner, olivier
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28423
Currently, if the immutable algorithm like bsearch or radix_lockless
receives rtable update notification, it schedules algorithm rebuild.
This rebuild is executed by the callout after ~50 milliseconds.
It is possible that a script adding an interface address and than route
with the gateway bound to that address will fail. It can happen due
to the fact that fib is not updated by the time the route addition
request arrives.
Fix this by allowing synchronous algorithm rebuilds based on certain
conditions. By default, these conditions assume:
1) less than net.route.algo.fib_sync_limit=100 routes
2) routes without gateway.
* Move algo instance build entirely under rib WLOCK.
Rib lock is only used for control plane (except radix algo, but there
are no rebuilds).
* Add rib_walk_ext_locked() function to allow RIB iteration with
rib lock already held.
* Fix rare potential callout use-after-free for fds by binding fd
callout to the relevant rib rmlock. In that case, callout_stop()
under rib WLOCK guarantees no callout will be executed afterwards.
MFC after: 3 days
subscriptions during RIB modifications.
Add new subscriptions to the beginning of the lists instead of
the end. This fixes the situation when new subscription is created
int the callback for the existing subscription, leading to the
subscription notification handler pick it.
MFC after: 3 days
* Move per-prefix debug lines under LOG_DEBUG2
* Create fib instance counter to distingush log messages between
instances
* Add more messages on rebuild reason.
MFC after: 3 days
rtinit[1]() is a function used to add or remove interface address prefix routes,
similar to ifa_maintain_loopback_route().
It was intended to be family-agnostic. There is a problem with this approach
in reality.
1) IPv6 code does not use it for the ifa routes. There is a separate layer,
nd6_prelist_(), providing interface for maintaining interface routes. Its part,
responsible for the actual route table interaction, mimics rtenty() code.
2) rtinit tries to combine multiple actions in the same function: constructing
proper route attributes and handling iterations over multiple fibs, for the
non-zero net.add_addr_allfibs use case. It notably increases the code complexity.
3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag
for p2p connections, host routes and p2p routes are handled in the same way.
Additionally, mapping IFA flags to RTF flags makes the interface pretty messy.
It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface
aliases.
4) rtinit() is the last customer passing non-masked prefixes to rib_action(),
complicating rib_action() implementation.
5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive"
ifa messages in certain corner cases.
To address all these points, the following has been done:
* rtinit() has been split into multiple functions:
- Route attribute construction were moved to the per-address-family functions,
dealing with (2), (3) and (4).
- funnction providing net.add_addr_allfibs handling and route rtsock notificaions
is the new routing table inteface.
- rtsock ifa notificaion has been moved out as well. resulting set of funcion are only
responsible for the actual route notifications.
Side effects:
* /32 alias does not result in interface routes (/32 route and "host" route)
* RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses
Differential revision: https://reviews.freebsd.org/D28186
Use recently-added combination of `fib[46]_lookup_rt()` which
returns rtentry & raw nexthop with `rt_get_inet[6]_plen()` which
returns address/prefix length of prefix inside `rt`.
Add `nhop_select_func()` wrapper around inlined `nhop_select()` to
allow callers external to the routing subsystem select the proper
nexthop from the multipath group without including internal headers.
New calls does not require reference counting objects and reduce
the amount of copied/processed rtentry data.
Differential Revision: https://reviews.freebsd.org/D27675
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
Multiple consumers like ipfw, netflow or new route lookup algorithms
need to get the prefix data out of struct rtentry.
Instead of providing direct access to the rtentry, create IPv4/IPv6
accessors to abstract struct rtentry internals and avoid including
internal routing headers for external consumers.
While here, move struct route_nhop_data to the public header, so external
customers can actually use lookup functions returning rt&nhop data.
Differential Revision: https://reviews.freebsd.org/D27416
ROUTE_MPATH is the new config option controlling new multipath routing
implementation. Remove the last pieces of RADIX_MPATH-related code and
the config option.
Reviewed by: glebius
Differential Revision: https://reviews.freebsd.org/D27244
It allows code within routing subsystem to transparently reference nexthops
and nexthop groups, similar to nhop_free_any(), abstracting ROUTE_MPATH
details.
Differential Revision: https://reviews.freebsd.org/D27410
The resulting KPI can be used by routing table consumers to estimate the required
scale for route table export.
* Add tracking for rib routes
* Add accessors for number of nexthops/nexthop objects
* Simplify rib_unsubscribe: store rnh we're attached to instead of requiring it up
again on destruction. This helps in the cases when rnh is not linked yet/already unlinked.
Differential Revision: https://reviews.freebsd.org/D27404
* Make rib_walk() order of arguments consistent with the rest of RIB api
* Add rib_walk_ext() allowing to exec callback before/after iteration.
* Rename rt_foreach_fib_walk_del -> rib_foreach_table_walk_del
* Rename rt_forach_fib_walk -> rib_foreach_table_walk
* Move rib_foreach_table_walk{_del} to route/route_helpers.c
* Slightly refactor rib_foreach_table_walk{_del} to make the implementation
consistent and prepare for upcoming iterator optimizations.
Differential Revision: https://reviews.freebsd.org/D27219
The goal of the fib support is to provide multiple independent
routing tables, isolated from each other.
net.add_addr_allfibs default tries to shift gears in the opposite
direction, unconditionally inserting all addresses to all of the fibs.
There are use cases when this is necessary, however this is not a
default expected behaviour, especially compared to other implementations.
Provide WARNING message for the setups with multiple fibs to notify
potential users of the feature.
Differential Revision: https://reviews.freebsd.org/D26076
connections over multiple paths.
Multipath routing relies on mbuf flowid data for both transit
and outbound traffic. Current code fills mbuf flowid from inp_flowid
for connection-oriented sockets. However, inp_flowid is currently
not calculated for outbound connections.
This change creates simple hashing functions and starts calculating hashes
for TCP,UDP/UDP-Lite and raw IP if multipath routes are present in the
system.
Reviewed by: glebius (previous version),ae
Differential Revision: https://reviews.freebsd.org/D26523
Nexthop lookup was not consireding rt_flags when doing
structure comparison, which lead to an original nexthop
selection when changing flags. Fix the case by adding
rt_flags field into comparison and rearranging nhop_priv
fields to allow for efficient matching.
Fix `route change X/Y flags` case - recent changes
disallowed specifying RTF_GATEWAY flag without actual gateway.
It turns out, route(8) fills in RTF_GATEWAY by default, unless
-interface flag is specified. Fix regression by clearing
RTF_GATEWAY flag instead of failing.
Fix route flag reporting in RTM_CHANGE messages by explicitly
updating rtm_flags after operation competion.
Add IPv4/IPv6 tests for flag-only route changes.
