The check was not introduced in r342628, but the subsequent unchecked access to
refs was added then, prompting a Coverity warning about "Null pointer
dereferences (FORWARD_NULL)." The warning is bogus due to M_WAITOK, but so is
the NULL check that hints it, so just remove it.
CID: 1398588
Reported by: Coverity
the destroying cdev.
Currently linux_destroy_dev() waits for the reference count on the
linux cdev to drain, and each open file hold the reference.
Practically it means that linux_destroy_dev() is blocked until all
userspace processes that have the cdev open, exit. FreeBSD devfs does
not have such problem, because device refcount only prevents freeing
of the cdev memory, and separate 'active methods' counter blocks
destroy_dev() until all threads leave the cdevsw methods. After that,
attempts to enter cdevsw methods are refused with an error.
Implement somewhat similar mechanism for LinuxKPI cdevs. Demote cdev
refcount to only mean a hold on the linux cdev memory. Add sirefs
count to track both number of threads inside the cdev methods, and for
single-bit indicator that cdev is being destroyed. In the later case,
the call is redirected to the dummy cdev.
Reviewed by: markj
Discussed with: hselasky
Tested by: zeising
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D18606
Driver description should be set by core and not by the Ethernet driver.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Currently we always return false if for PCI offline query.
Try to read PCI config, if the return value if 0xffff probably the
PCI is offline.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make sure we hold a reference on the character device for every opened file
to prevent the character device to be freed prematurely.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
If there is a vnode attached to the linux file, use it to fill
kinfo_file. Otherwise, report a new KF_TYPE_DEV file type, without
supplying any type-specific information.
KF_TYPE_DEV is supposed to be used by most devfs-specific file types.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Given a zeroed struct image_args with an allocated buf member,
exec_args_add_fname() must be called to install a file name (or NULL).
Then zero or more calls to exec_args_add_env() followed by zero or
more calls to exec_args_add_env(). exec_args_adjust_args() may be
called after args and/or env to allow an interpreter to be prepended to
the argument list.
To allow code reuse when adding arg and env variables, begin_envv
should be accessed with the accessor exec_args_get_begin_envv()
which handles the case when no environment entries have been added.
Use these functions to simplify exec_copyin_args() and
freebsd32_exec_copyin_args().
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15468
Some kevent functions have a boolean "waitok" parameter for use when
calling malloc(9). Replace them with the corresponding malloc() flags:
the desired behaviour is known at compile-time, so this eliminates a
couple of conditional branches, and makes the code easier to read.
No functional change intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18318
According to markj@:
pageproc contains the page daemon and laundry threads, which are
responsible for managing the LRU page queues and writing back dirty
pages. vmproc's main task is to swap out kernel stacks when the system
is under memory pressure, and swap them back in when necessary. It's a
somewhat legacy component of the system and isn't required. You can
build a kernel without it by specifying "options NO_SWAPPING" (which is
a somewhat misleading name), in which vm_swapout_dummy.c is compiled
instead of vm_swapout.c.
Based on this, we want pageproc to emulate kswapd, not vmproc.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D18061
These are used by kms-drm to determine various heuristics relate
memory conditions.
The number of free swap pages is just a variable, and it can be
much cheaper by either adding a new getter, or simply extern'ing
swap_total. However, this patch opts to use the more expensive,
existing interface - since this isn't an operation in a high per
path.
This allows us to remove some more gpl linuxkpi and do the follo
kms-drm:
git rm linuxkpi/gplv2/include/linux/swap.h
Reviewed by: mmacy, Johannes Lundberg <johalun0@gmail.com>
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D18052
This was hidden behind the LINUX_CMSG_NXTHDR macro which dereferences its
second argument. Stop using the macro as well as LINUX_CMSG_FIRSTHDR. Use
the size field of the kernel copy of the control message header to obtain
the next control message.
PR: 217901
MFC after: 2 days
X-MFC-With: r340631
Instead of calling m_append with a user address, allocate an mbuf cluster
and copy data into it using copyin. For the SCM_CREDS case, instead of
zeroing a stack variable and appending that to the mbuf, zero part of the
mbuf cluster directly. One mbuf cluster is also the size limit used by
the FreeBSD sendmsg syscall (uipc_syscalls.c:sockargs()).
PR: 217901
Reviewed by: kib
MFC after: 3 days
Doing so removes the dependency on proctree lock from sysctl process list
export which further reduces contention during poudriere -j 128 runs.
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17825
Allow the location of capabilities.conf to be configured.
Also allow a per-abi syscall prefix to be configured with the
abi_func_prefix syscalls.conf variable and check syscalls against
entries in capabilities.conf with and without the prefix amended.
Take advantage of these two features to allow use shared capabilities.conf
between the default syscall vector and the freebsd32 compatability
layer. We've been inconsistent about keeping the two in sync as
evidenced by the bugs fixed in r340294. This eliminates that problem
going forward.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17932
As dev_t is now a 64-bit integer, it requires special handling as a
system call argument. 64-bit arguments are split between two 64-bit
integers due to the way arguments are promoted to allow reuse of most
system call implementations. They must be reassembled before use.
Further, 64-bit arguments at an odd offset (counting from zero) are
padded and slid to the next slot on powerpc and mips. Fix the
non-COMPAT11 system call by adding a freebsd32_mknodat() and
appropriately padded declerations.
The COMPAT11 system calls are fully compatible with the 64-bit
implementations so remove the freebsd32_ versions.
Use uint32_t consistently as the type of the old dev_t. This matches
the old definition.
Reviewed by: kib
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17928
Bugs range from failure to update after changing syscall implementaion
names to using the wrong name. Somewhat confusingly, the name in
capabilities.conf is exactly the string that appears in syscalls.master,
not the name with a COMPAT* prefix which is the actual function name.
Found while making a change to use the default capabilities.conf.
Fixes: r335177, r336980, r340272, r340274, others
Reviewed by: kib, emaste
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17925
The previous code required that the return type be a single word. This
allows it to be a pointer without using a typedef.
Update the return types of break, mmap, and shmat to be void * as
declared. This only effects systrace output in-tree, but can aid in
generating system call wrappers from syscalls.master.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17873
Leave ptrace(2) alone for the moment as it's defined to take a caddr_t.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17852
linux_ioctl_(un)register_handler that allows other driver modules to
register ioctl handlers. The ioctl syscall implementation in each Linux
compat module iterates over the list of handlers and forwards the call to
the appropriate driver. Because the registration functions have the same
name in each module it is not possible for a driver to support both 32 and
64 bit linux compatibility.
Move the list of ioctl handlers to linux_common.ko so it is shared by
both Linux modules and all drivers receive both 32 and 64 bit ioctl calls
with one registration. These ioctl handlers normally forward the call
to the FreeBSD ioctl handler which can handle both 32 and 64 bit.
Keep the special COMPAT_LINUX32 ioctl handlers in linux.ko in a separate
list for now and let the ioctl syscall iterate over that list first.
Later, COMPAT_LINUX32 support can be added to the 64 bit ioctl handlers
via a runtime check for ILP32 like is done for COMPAT_FREEBSD32 and then
this separate list would disappear again. That is a much bigger effort
however and this commit is meant to be MFCable.
This enables linux64 support in x11/nvidia-driver*.
PR: 206711
Reviewed by: kib
MFC after: 3 days
These arguments are mostly paths handled by NAMEI*() macros which already
take const char * arguments.
This change improves the match between syscalls.master and the public
declerations of system calls.
Reviewed by: kib (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17812
