The stageqdepth (global, over all staging queues) was being kept
incorrectly. It was being incremented whenever things were added,
but only decremented during a flush. During active fast frames activity
it wasn't being decremented, resulting in it always having a non-zero
value during normal fast-frames operation.
It was only used when checking if the aging queue should be checked;
we may as well just defer to each of those staging queue counters (which
look correct, thankfully.)
Whilst I'm here, add locking assertions in the staging queue add/remove
functions. The current crash shows that the staging queue has one frame,
but only has a tail pointer set (the head pointer being set to NULL.)
I'd like to grab a few more crashes where these locking assertions are
in place so I can narrow down the issue between "somehow locking is
messed up and things are racy" and "the stage queue head/tail pointer
manipulation logic is subtly wrong."
Tested:
* AR5416 STA, AR5413 AP; with FastFrames enabled in the AR5416 HAL.
PR: kern/174283
Committed with changes to support the following from loader.conf(5):
+ console="vidconsole comconsole" (not just console="comconsole")
+ boot_serial="anything" (not just boot_serial="YES")
+ boot_multicons="anything" (unsupported in originally-submitted patch)
PR: conf/121064
Submitted by: koitsu
Reviewed by: gcooper, adrian (co-mentor)
Approved by: adrian (co-mentor)
pointers and leave the stage queue flush routine to just do nothing
(since both head and tail here will be NULL.)
This should quieten the "stageq empty" panic where the stageq itself
is empty, but it won't fix the second KASSERT() here "staging queue empty"
as that's likely a different underlying problem.
PR: kern/174283
similar changes had to be made in various places throughout the machine-
independent virtual memory layer to support the new vm object type.
However, in most of these places, it's actually not the type of the vm
object that matters to us but instead certain attributes of its pages.
For example, OBJT_DEVICE, OBJT_MGTDEVICE, and OBJT_SG objects contain
fictitious pages. In other words, in most of these places, we were
testing the vm object's type to determine if it contained fictitious (or
unmanaged) pages.
To both simplify the code in these places and make the addition of future
vm object types easier, this change introduces two new vm object flags
that describe attributes of the vm object's pages, specifically, whether
they are fictitious or unmanaged.
Reviewed and tested by: kib
to head. I don't think the NFS client behaviour will change unless
the new "minorversion=1" mount option is used. It includes basic
NFSv4.1 support plus support for pNFS using the Files Layout only.
All problems detecting during an NFSv4.1 Bakeathon testing event
in June 2012 have been resolved in this code and it has been tested
against the NFSv4.1 server available to me.
Although not reviewed, I believe that kib@ has looked at it.
while doing a copyout. That can cause a panic, because copyout
can trigger VM faults, and we can't handle VM faults while holding
a mutex.
The solution here is to malloc a separate buffer to hold the OOA
queue entries, so that we don't risk a VM fault while filling up
the buffer and we don't have to drop the lock. The other solution
would be to wire the user's memory while filling their buffer with
copyout, but that would have been a little more complex.
Also fix a debugging parenthesis issue in ctl_abort_task() pointed
out by Chuck Tuffli.
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
drivers.
The bug occurrs when a userland process has the driver instance
open and the underlying device goes away. We get the devfs
callback that the device node has been destroyed, but not all of
the closes necessary to fully decrement the reference count on the
CAM peripheral.
The reason is that once devfs calls back and says the device has
been destroyed, it is moved off to deadfs, and devfs guarantees
that there will be no more open or close calls. So the solution
is to keep track of how many outstanding open calls there are on
the device, and just release that many references when we get the
callback from devfs.
scsi_pass.c,
scsi_enc.c,
scsi_enc_internal.h: Add an open count to the softc in these
drivers. Increment it on open and
decrement it on close.
When we get a devfs callback to say that
the device node has gone away, decrement
the peripheral reference count by the
number of still outstanding opens.
Make sure we don't access the peripheral
with cam_periph_unlock() after what might
be the final call to
cam_periph_release_locked(). The
peripheral might have been freed, and we
will be dereferencing freed memory.
scsi_ch.c,
scsi_sg.c: For the ch(4) and sg(4) drivers, add the
same changes described above, and in
addition, fix another bug that was
previously fixed in the pass(4) and enc(4)
drivers.
These drivers were calling destroy_dev()
from their cleanup routine, but that could
cause a deadlock because the cleanup
routine could be indirectly called from
the driver's close routine. This would
cause a deadlock, because the device node
is being held open by the active close
call, and can't be destroyed.
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
are used by NFSv4.1 for callbacks. A backchannel is a connection
established by the client, but used for RPCs done by the server
on the client (callbacks). As a result, this patch mixes some
client side calls in the server side and vice versa. Some
definitions in the .c files were extracted out into a file called
krpc.h, so that they could be included in multiple .c files.
This code has been in projects/nfsv4.1-client for some time.
Although no one has given it a formal review, I believe kib@
has taken a look at it.
The problem was a race condition between the EDT traversal used by
things like 'camcontrol devlist', and CAM peripheral driver
removal.
The EDT traversal code holds the CAM topology lock, and wants
to show devices that have been invalidated. It acquires a
reference to the peripheral to make sure the peripheral it is
examining doesn't go away.
However, because the peripheral removal code in camperiphfree()
drops the CAM topology lock to call the peripheral's destructor
routine, we can run into a situation where the EDT traversal
increments the peripheral reference count after free process is
already in progress. At that point, the reference count is
ignored, because it was 0 when we started the process.
Fix this race by setting a flag, CAM_PERIPH_FREE, that I previously
added and checked in xptperiphtraverse() and xptpdperiphtravsere(),
but failed to use. If the EDT traversal code sees that flag,
it will know that the peripheral free process has already started,
and that it should not access that peripheral.
Also, fix an inconsistency in the locking between
xptpdperiphtraverse() and xptperiphtraverse(). They now both
hold the CAM topology lock while calling the peripheral traversal
function.
cam_xpt.c: Change xptperiphtraverse() to hold the CAM topology
lock across calls to the traversal function.
Take out the comment in xptpdperiphtraverse() that
referenced the locking inconsistency.
cam_periph.c: Set the CAM_PERIPH_FREE flag when we are in the
process of freeing a peripheral driver.
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
- unp_zone: kern.ipc.maxsockets limit reached
- socket_zone: kern.ipc.maxsockets limit reached
- zone_mbuf: kern.ipc.nmbufs limit reached
- zone_clust: kern.ipc.nmbclusters limit reached
- zone_jumbop: kern.ipc.nmbjumbop limit reached
- zone_jumbo9: kern.ipc.nmbjumbo9 limit reached
- zone_jumbo16: kern.ipc.nmbjumbo16 limit reached
Note that those warnings are printed not often than every five minutes and can
be globally turned off by setting sysctl/tunable vm.zone_warnings to 0.
Discussed on: arch
Obtained from: WHEEL Systems
MFC after: 2 weeks
will be printed once the given zone becomes full and cannot allocate an
item. The warning will not be printed more often than every five minutes.
All UMA warnings can be globally turned off by setting sysctl/tunable
vm.zone_warnings to 0.
Discussed on: arch
Obtained from: WHEEL Systems
MFC after: 2 weeks
Security Fixes
Prevents named from aborting with a require assertion failure
on servers with DNS64 enabled. These crashes might occur as a
result of specific queries that are received.
New Features
* Elliptic Curve Digital Signature Algorithm keys and signatures in
DNSSEC are now supported per RFC 6605. [RT #21918]
Feature Changes
* Improves OpenSSL error logging [RT #29932]
* nslookup now returns a nonzero exit code when it is unable to get
an answer. [RT #29492]
Other critical bug fixes are included.
Approved by: delphij (mentor)
MFC after: 3 days
Security: CVE-2012-5688
Sponsored by: DK Hostmaster A/S
This is to allow debug images to be used without taking down the
system when non-fatal asserts are hit.
The following sysctls are added:
debug.kassert.warn_only: 1 = log, 0 = panic
debug.kassert.do_ktr: set to a ktr mask for logging via KTR
debug.kassert.do_log: 1 = log, 0 = quiet
debug.kassert.warnings: stats, number of kasserts hit
debug.kassert.log_panic_at:
number of kasserts before we actually panic, 0 = never
debug.kassert.log_pps_limit: pps limit for log messages
debug.kassert.log_mute_at: stop warning after N kasserts, 0 = never stop
debug.kassert.kassert: set this sysctl to trigger a kassert
Discussed with: scottl, gnn, marcel
Sponsored by: iXsystems
The XC900M acts as a Ubiquiti XR9 (and I _think_ SR9) by default;
it uses the same 900MHz<->2.4GHz downconverter mapping.
However it has an alternative frequency mapping which squeezes in a couple
more half/quarter rate channels. Since the default HAL doesn't support
fractional tuning (sub-1MHz) in 2.4GHz mode on the AR5413/AR5414, they
implement it using a jumper.
Datasheet: http://www.xagyl.com/download/XC900M_Datasheet.pdf
Thankyou to Xagyl Communications for the XC900M NICs and Edgar Martinez
for organising the donation.
Tested:
* XC900M <-> XC900M
* Ubiquiti XR9 <-> XC900M
TODO:
* Test against SR9 and GZ901 if possible (the IEEE channel<->frequency
mapping may not match up, thanks to the slightly different channels
involved)
EPROTONOSUPPORT if the address family is not supported.
- introduce pffinddomain() to find a domain by family and use it as
appropriate.
Reviewed by: glebius
id hash. If a state has been disconnected from id hash, its rule pointers
can no longer be dereferenced, and referenced memory can't be modified.
Thus, move rule statistics from pf_free_rule() to pf_unlink_rule() and
update them prior to releasing id hash slot lock.
Reported by: Ian FREISLICH <ianf cloudseed.co.za>
