capability mode and capabilities.
Right now no attempt is made to unwrap capabilities when operating on
a crashdump, so further refinement is required.
Approved by: re (bz)
Sponsored by: Google Inc
Partial merge of 2431 from trunk: Retry writes on EINTR.
This should fix the SIGINT handler in bsdtar.
Note: The rest of r2431 can't be merged, since it interacts
with a big write-side rearchitecture.
PR: bin/149409
Reviewed by: kientzle
Approved by: re (kib)
MFC after: 3 days
in order to account for LP64 targets when cross-debugging on ILP32,
allowing r224683 to compile on ILP32.
Note that thr_p{read,write}_{long,ptr}() still incorrectly use the size
of the respective types on the host rather than that on the target when
accessing the target address space which still needs to be fixed. This
means that r224683 alone may not be sufficient to solve the problem it's
intended to fix when cross-debugging.
Approved by: re (hrs)
violated ECMA-119 (ISO9660): allow reserved4 to be 0x20 in PVD.
This allows tar to read FreeBSD distribution ISO images created
with makefs prior to NetBSD bin/45217 bugfix (up to 9.0-BETA1).
In addition, merge following important bugfixes from
libarchive's release/2.8 branch:
Revision 2812:
Merge 2811 from trunk: Don't try to verify that compression-level=0
produces larger results than the default compression, since this isn't
true for all versions of liblzma.
Revision 2817:
Merge 2814 from trunk: Fix Issue 121 (mtree parser error)
http://code.google.com/p/libarchive/issues/detail?id=121
Revision 2820:
Fix issue 119.
Change the file location check that a file location does not exceed
volume block. New one is that a file content does not exceed volume
block(end of an ISO image). It is better than previous check even
if the issue did not happen.
While reading an ISO image generated by an older version of mkisofs
utility, a file location indicates the end the ISO image if its file
size is zero and it is the last file of all files of the ISO image,
so it is possible that the location value is the same as the number
of the total block of the ISO image.
http://code.google.com/p/libarchive/issues/detail?id=119
Revision 2955:
Issue 134: Fix libarchive 2.8 crashing in archive_write_finish() when
the open has failed and we're trying to write Zip format.
http://code.google.com/p/libarchive/issues/detail?id=134
Revision 2958:
Followup on Issue 134:
1) Port test_open_failure to libarchive 2.8 branch to test
the problem reported in Issue 134.
This test also shows that archive_read_open() sometimes
fails to report open errors correctly.
2) Fix the bug in archive_read.c
3) Comment out the tests that close functions are invoked
promptly when open fails; that's fully fixed in libarchive 3.0,
but I don't think it's worth fixing here.
Revision 3484:
Use uintmax_t with %ju
Revision 3487:
Fix issue 163.
Correctly allocate enough memory for a input buffer saved.
http://code.google.com/p/libarchive/issues/detail?id=163
Revision 3542:
Merge 2516, 2536 from trunk: Allow path table offset values of
0 and 18, which are used by some ISO writers.
Reviewed by: kientzle
Approved by: re (kib)
MFC after: 3 days
Accessing it as an int causes failure on big-endian LP64, i.e. mips64be,
powerpc64 and sparc64.
Reviewed by: marcel
Approved by: re (kib)
MFC after: 1 week
o get the physical address and size of the PBVM page table. This
can be found in the bootinfo structure, of which the physical
address is recorded as the ELF entry point.
o translate region 4 virtual addresses to physical addresses using
the PBVM page table.
In _kvm_kvatop() make the distinction between physical address and
core file offset a little clearer to avoid confusion. To further
enhance readability, always store the translated address into pa
so that it's obvious how the translation from va to pa happened.
Approved by: re (blanket)
* Decouple the path supervision using a separate HB timer per path.
* Add support for potentially failed state.
* Bring back RTO.min to 1 second.
* Accept packets on IP-addresses already announced via an ASCONF
* While there: do some cleanups.
Approved by: re@
MFC after: 2 months.
proc_attach always frees any struct proc_handle data
that it allocates, but that is supposed to be done
only in error conditions.
PR: bin/158431
Approved by: re (kib)
MFC after: 1 week
dynamic memory allocation to hold per-CPU memory types data (sized to
mp_maxid for UMA, and to mp_maxcpus for malloc to match the kernel).
That fixes libmemstat with arbitrary large MAXCPU values and therefore
eliminates MEMSTAT_ERROR_TOOMANYCPUS error type.
Reviewed by: jhb
Approved by: re (kib)
- Fix usbhidctl and usbhidaction to handle HID devices with multiple
report ids, such as multimedia keyboards.
- Add collection type and report id to the `usbhidctl -r` output. They
are important for proper device understanding and debugging.
- Fix usbhidaction tool to properly handle items having report_count
more then 1.
Approved by: re (kib)
MFC after: 2 weeks
These system calls have already been implemented in the kernel; now we
hook up libc symbols so userspace can drive them.
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
-g, by reverting r219139. The LLVM PR referenced in that revision was
fixed in the mean time, and we imported a clang snapshot soon
afterwards, so the temporary workaround of disabling clang's integrated
assembler is no longer needed.
In this particular case, using e.g. DEBUG_FLAGS=-g causes clang to
output certain directives into assembly that our version of GNU as
chokes on.
Reported by: dougb
Approved by: re (kib)
This includes a structural change regarding atomic ops. Previously they
were enabled on all platforms unless we had knowledge that they did not
work. However both work performed by marius@ on sparc64 and the fact that
the 9.8.x branch is fussier in this area has demonstrated that this is
not a safe approach. So I've modified a patch provided by marius to
enable them for i386, amd64, and ia64 only.
- Clamp the string length to 255 bytes when getting
the interface description.
- Clamp data request length to 65535 bytes when doing
control requests.
MFC after: 3 days
Formerly, in this case an error was returned but the pid was also returned
to the application, requiring the application to use unspecified behaviour
(the returned pid in error situations) to avoid zombies.
Now, reap the zombie and do not return the pid.
MFC after: 2 weeks
In C90, NULL is guaranteed to be declared in <stddef.h> and also in
<string.h>. Though the correct way to define NULL in FreeBSD is to
include <sys/_null.h>, other parts of libstand still require <string.h>
to build; therefore, we keep <string.h> in stand.h and add a note about
this;
- Removing no longer used 'Prototype' definition. Quote from bde@:
'Cruft related to getting incomplete struct declarations within
prototypes forward-declared before the structs. It doesn't mean
"prototype" but only part of a prototype-related hack. No longer
used.'
- Replacing iaddr_t with uintptr_t;
- Removing use of long double to determine alignment. Use a fixed 16 byte
alignment instead;
Reviewed by: bde
Obtained from: DragonFlyBSD (partially)
MFC after: 1 month
this fix only applies to zalloc.c, the other part of libstand such like
qdivrem.c still gives compilation warnings on sparc64 tinderbox builds;
therefore, WARNS level isn't changed for now.
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Reviewed by: bde
mask of CPUs, pc_other_cpus and pc_cpumask become highly inefficient.
Remove them and replace their usage with custom pc_cpuid magic (as,
atm, pc_cpumask can be easilly represented by (1 << pc_cpuid) and
pc_other_cpus by (all_cpus & ~(1 << pc_cpuid))).
This change is not targeted for MFC because of struct pcpu members
removal and dependency by cpumask_t retirement.
MD review by: marcel, marius, alc
Tested by: pluknet
MD testing by: marcel, marius, gonzo, andreast
about the parent USB device:
- libusb20_dev_get_parent_address
- libusb20_dev_get_parent_port
- Rename libusb20_compat01.c into libusb01.c
MFC after: 3 days
(1) Coding style changes.
(2) If the server does not acknowledge any blocksize option,
revert to the default blocksize of 512 bytes.
(3) Send ACK if the first packet happens to be the last packet.
(4) Do not accept blocksize greater than what was requested.
(5) Drop any unwanted OACK received if a tftp transfer is already
in progress.
(6) Terminate incomplete transfers with a special no-error ERROR packet.
Otherwise we rely on the tftp server to time out, which it does
eventually, after re-sending the last packet several times and spamming
the system log about it every time. This idea is borrowed from the
PXE client, which does exactly that.
Submitted by: Alexander Kabaev <kan@FreeBSD.org>
Reviewed and Tested by: Santhanakrishnan Balraj <sbalraj at juniper dot net>
