The intention was to just limit leading zeroes on numeric names. That
check is now improved to also catch the leading spaces and '+' that
strtoul can pass through.
PR: 204897
MFC after: 3 days
A panicking thread always executes with a critical section held, so any
attempt to allocate or free memory while dumping will otherwise cause a
second panic. This can occur, for example, if xpt_polled_action() completes
non-dump I/O that was pending at the time of the panic. The fact that this
can occur is itself a bug, but asserting in this case does little but
reduce the reliability of kernel dumps.
Suggested by: kib
Reported by: pho
These helper functions can be used to read in or write a buffer from or to
an arbitrary process' address space. Without them, this can only be done
using proc_rwmem(), which requires the caller to fill out a uio. This is
onerous and results in code duplication; the new functions provide a simpler
interface which is sufficient for most existing callers of proc_rwmem().
This change also adds a manual page for proc_rwmem() and the new functions.
Reviewed by: jhb, kib
Differential Revision: https://reviews.freebsd.org/D4245
clock_gettime(2) on ARMv7 and ARMv8 systems which have architectural
generic timer hardware. It is similar how the RDTSC timer is used in
userspace on x86.
Fix a permission problem where generic timer access from EL0 (or
userspace on v7) was not properly initialized on APs.
For ARMv7, mark the stack non-executable. The shared page is added for
all arms (including ARMv8 64bit), and the signal trampoline code is
moved to the page.
Reviewed by: andrew
Discussed with: emaste, mmel
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4209
For completeness add a VNASSERT that there are no threads waiting on a
range lock (this was previously checked on every vnode free).
Reported by; Rick Macklem
Fix from: Mateusz Guzik
PR: 204949
camdd(8) utility.
CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and
completed CCBs may be retrieved via the CAMIOGET ioctl. User
processes can use poll(2) or kevent(2) to get notification when
I/O has completed.
While the existing CAMIOCOMMAND blocking ioctl interface only
supports user virtual data pointers in a CCB (generally only
one per CCB), the new CAMIOQUEUE ioctl supports user virtual and
physical address pointers, as well as user virtual and physical
scatter/gather lists. This allows user applications to have more
flexibility in their data handling operations.
Kernel memory for data transferred via the queued interface is
allocated from the zone allocator in MAXPHYS sized chunks, and user
data is copied in and out. This is likely faster than the
vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in
configurations with many processors (there are more TLB shootdowns
caused by the mapping/unmapping operation) but may not be as fast
as running with unmapped I/O.
The new memory handling model for user requests also allows
applications to send CCBs with request sizes that are larger than
MAXPHYS. The pass(4) driver now limits queued requests to the I/O
size listed by the SIM driver in the maxio field in the Path
Inquiry (XPT_PATH_INQ) CCB.
There are some things things would be good to add:
1. Come up with a way to do unmapped I/O on multiple buffers.
Currently the unmapped I/O interface operates on a struct bio,
which includes only one address and length. It would be nice
to be able to send an unmapped scatter/gather list down to
busdma. This would allow eliminating the copy we currently do
for data.
2. Add an ioctl to list currently outstanding CCBs in the various
queues.
3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do
that.
4. Test physical address support. Virtual pointers and scatter
gather lists have been tested, but I have not yet tested
physical addresses or scatter/gather lists.
5. Investigate multiple queue support. At the moment there is one
queue of commands per pass(4) device. If multiple processes
open the device, they will submit I/O into the same queue and
get events for the same completions. This is probably the right
model for most applications, but it is something that could be
changed later on.
Also, add a new utility, camdd(8) that uses the asynchronous pass(4)
driver interface.
This utility is intended to be a basic data transfer/copy utility,
a simple benchmark utility, and an example of how to use the
asynchronous pass(4) interface.
It can copy data to and from pass(4) devices using any target queue
depth, starting offset and blocksize for the input and ouptut devices.
It currently only supports SCSI devices, but could be easily extended
to support ATA devices.
It can also copy data to and from regular files, block devices, tape
devices, pipes, stdin, and stdout. It does not support queueing
multiple commands to any of those targets, since it uses the standard
read(2)/write(2)/writev(2)/readv(2) system calls.
The I/O is done by two threads, one for the reader and one for the
writer. The reader thread sends completed read requests to the
writer thread in strictly sequential order, even if they complete
out of order. That could be modified later on for random I/O patterns
or slightly out of order I/O.
camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from
the pass(4) driver and also to send request notifications internally.
For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR)
per CAM CCB on the reading side, and a scatter/gather list
(CAM_DATA_SG) on the writing side. In addition to testing both
interfaces, this makes any potential reblocking of I/O easier. No
data is copied between the reader and the writer, but rather the
reader's buffers are split into multiple I/O requests or combined
into a single I/O request depending on the input and output blocksize.
For the file I/O path, camdd(8) also uses a single buffer (read(2),
write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list
(readv(2), writev(2), preadv(2), pwritev(2)) on writes.
Things that would be nice to do for camdd(8) eventually:
1. Add support for I/O pattern generation. Patterns like all
zeros, all ones, LBA-based patterns, random patterns, etc. Right
Now you can always use /dev/zero, /dev/random, etc.
2. Add support for a "sink" mode, so we do only reads with no
writes. Right now, you can use /dev/null.
3. Add support for automatic queue depth probing, so that we can
figure out the right queue depth on the input and output side
for maximum throughput. At the moment it defaults to 6.
4. Add support for SATA device passthrough I/O.
5. Add support for random LBAs and/or lengths on the input and
output sides.
6. Track average per-I/O latency and busy time. The busy time
and latency could also feed in to the automatic queue depth
determination.
sys/cam/scsi/scsi_pass.h:
Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue
and fetch asynchronous CAM CCBs respectively.
Although these ioctls do not have a declared argument, they
both take a union ccb pointer. If we declare a size here,
the ioctl code in sys/kern/sys_generic.c will malloc and free
a buffer for either the CCB or the CCB pointer (depending on
how it is declared). Since we have to keep a copy of the
CCB (which is fairly large) anyway, having the ioctl malloc
and free a CCB for each call is wasteful.
sys/cam/scsi/scsi_pass.c:
Add asynchronous CCB support.
Add two new ioctls, CAMIOQUEUE and CAMIOGET.
CAMIOQUEUE adds a CCB to the incoming queue. The CCB is
executed immediately (and moved to the active queue) if it
is an immediate CCB, but otherwise it will be executed
in passstart() when a CCB is available from the transport layer.
When CCBs are completed (because they are immediate or
passdone() if they are queued), they are put on the done
queue.
If we get the final close on the device before all pending
I/O is complete, all active I/O is moved to the abandoned
queue and we increment the peripheral reference count so
that the peripheral driver instance doesn't go away before
all pending I/O is done.
The new passcreatezone() function is called on the first
call to the CAMIOQUEUE ioctl on a given device to allocate
the UMA zones for I/O requests and S/G list buffers. This
may be good to move off to a taskqueue at some point.
The new passmemsetup() function allocates memory and
scatter/gather lists to hold the user's data, and copies
in any data that needs to be written. For virtual pointers
(CAM_DATA_VADDR), the kernel buffer is malloced from the
new pass(4) driver malloc bucket. For virtual
scatter/gather lists (CAM_DATA_SG), buffers are allocated
from a new per-pass(9) UMA zone in MAXPHYS-sized chunks.
Physical pointers are passed in unchanged. We have support
for up to 16 scatter/gather segments (for the user and
kernel S/G lists) in the default struct pass_io_req, so
requests with longer S/G lists require an extra kernel malloc.
The new passcopysglist() function copies a user scatter/gather
list to a kernel scatter/gather list. The number of elements
in each list may be different, but (obviously) the amount of data
stored has to be identical.
The new passmemdone() function copies data out for the
CAM_DATA_VADDR and CAM_DATA_SG cases.
The new passiocleanup() function restores data pointers in
user CCBs and frees memory.
Add new functions to support kqueue(2)/kevent(2):
passreadfilt() tells kevent whether or not the done
queue is empty.
passkqfilter() adds a knote to our list.
passreadfiltdetach() removes a knote from our list.
Add a new function, passpoll(), for poll(2)/select(2)
to use.
Add devstat(9) support for the queued CCB path.
sys/cam/ata/ata_da.c:
Add support for the BIO_VLIST bio type.
sys/cam/cam_ccb.h:
Add a new enumeration for the xflags field in the CCB header.
(This doesn't change the CCB header, just adds an enumeration to
use.)
sys/cam/cam_xpt.c:
Add a new function, xpt_setup_ccb_flags(), that allows specifying
CCB flags.
sys/cam/cam_xpt.h:
Add a prototype for xpt_setup_ccb_flags().
sys/cam/scsi/scsi_da.c:
Add support for BIO_VLIST.
sys/dev/md/md.c:
Add BIO_VLIST support to md(4).
sys/geom/geom_disk.c:
Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size
limiting code in g_disk_start() a bit.
sys/kern/subr_bus_dma.c:
Change _bus_dmamap_load_vlist() to take a starting offset and
length.
Add a new function, _bus_dmamap_load_pages(), that will load a list
of physical pages starting at an offset.
Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios.
Allow unmapped I/O to start at an offset.
sys/kern/subr_uio.c:
Add two new functions, physcopyin_vlist() and physcopyout_vlist().
sys/pc98/include/bus.h:
Guard kernel-only parts of the pc98 machine/bus.h header with
#ifdef _KERNEL.
This allows userland programs to include <machine/bus.h> to get the
definition of bus_addr_t and bus_size_t.
sys/sys/bio.h:
Add a new bio flag, BIO_VLIST.
sys/sys/uio.h:
Add prototypes for physcopyin_vlist() and physcopyout_vlist().
share/man/man4/pass.4:
Document the CAMIOQUEUE and CAMIOGET ioctls.
usr.sbin/Makefile:
Add camdd.
usr.sbin/camdd/Makefile:
Add a makefile for camdd(8).
usr.sbin/camdd/camdd.8:
Man page for camdd(8).
usr.sbin/camdd/camdd.c:
The new camdd(8) utility.
Sponsored by: Spectra Logic
MFC after: 1 week
on every allocation and fully releases them on every free. These
are not trivial costs: it starts by zeroing a large structure then
initializes a mutex, a lock manager lock, an rw lock, four lists,
and six pointers. And looking at vfs.vnodes_created, these operations
are being done millions of times an hour on a busy machine.
As a performance optimization, this code update uses the uma_init
and uma_fini routines to do these initializations and cleanups only
as the vnodes enter and leave the vnode_zone. With this change the
initializations are only done kern.maxvnodes times at system startup
and then only rarely again. The frees are done only if the vnode_zone
shrinks which never happens in practice. For those curious about the
avoided work, look at the vnode_init() and vnode_fini() functions in
kern/vfs_subr.c to see the code that has been removed from the main
vnode allocation/free path.
Reviewed by: kib
Tested by: Peter Holm
sysent.
sv_prepsyscall is unused.
sv_sigsize and sv_sigtbl translate signal number from the FreeBSD
namespace into the ABI domain. It is only utilized on i386 for iBCS2
binaries. The issue with this approach is that signals for iBCS2 were
delivered with the FreeBSD signal frame layout, which does not follow
iBCS2. The same note is true for any other potential user if
sv_sigtbl. In other words, if ABI needs signal number translation, it
really needs custom sv_sendsig method instead.
Sponsored by: The FreeBSD Foundation
active list, into the header comment for vdrop(), which is the
function that decides whether to leave the vnode on the list. Note
that dirty page write-out in vinactive() is asynchronous.
Discussed with: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
targets. See the comment above wantfreevnodes variable for the
description of the algorithm.
The vfs.vlru_alloc_cache_src sysctl is removed. New code frees
namecache sources as the last chance to satisfy the highest watermark,
instead of selecting the source vnodes randomly. This provides good
enough behaviour to keep vn_fullpath() working in most situations.
The filesystem layout with deep trees, where the removed knob was
required, is thus handled automatically.
Submitted by: bde
Discussed with: mckusick
Tested by: pho
MFC after: 1 month
sysentvec. This allows the timekeep data to be shared between similar
ABIs which cannot share sysentvec.
Make the timekeep_push_vdso() tick callback to the timekeep structures
instead of sysentvecs. If several sysentvec share the vdso_sv_tk
structure, we would update the userspace data several times on each
tick, without the change.
Only allocate vdso_sv_tk in the exec_sysvec_init() sysinit when
sysentvec is marked with the new SV_TIMEKEEP flag. This saves
allocation and update of unneeded vdso_sv_tk for ABIs which do not
provide userspace gettimeofday yet, which are PowerPCs arches right
now.
Make vdso_sv_tk allocator public, namely split out and export
alloc_sv_tk() and alloc_sv_tk_compat32(). ABIs which share timekeep
data now can allocate it manually and share as appropriate.
Requested by: nwhitehorn
Tested by: nwhitehorn, pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
All versions of getfsstat(3) are supposed to return the number of [o]statfs
structs in the array that was copied out.
Also fix missing bounds checking and signed comparison of unsigned types.
Submitted by: bde@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
critical section.
uma_zalloc_arg()/uma_zalloc_free() may acquire a sleepable lock on the
zone. The malloc() family of functions may call uma_zalloc_arg() or
uma_zalloc_free().
The malloc(9) man page currently claims that free() will never sleep.
It also implies that the malloc() family of functions will not sleep
when called with M_NOWAIT. However, it is more correct to say that
these functions will not sleep indefinitely. Indeed, they may acquire
a sleepable lock. However, a developer may overlook this restriction
because the WITNESS check that catches attempts to call the malloc()
family of functions within a critical section is inconsistenly
applied.
This change clarifies the language of the malloc(9) man page to clarify
the restriction against calling the malloc() family of functions
while in a critical section or holding a spin lock. It also adds
KASSERTs at appropriate points to make the enforcement of this
restriction more consistent.
PR: 204633
Differential Revision: https://reviews.freebsd.org/D4197
Reviewed by: markj
Approved by: gnn (mentor)
Sponsored by: Juniper Networks
This is useful in environments where system configuration is performed by
automated interaction with the system console, since unexpected witness
output makes such automation difficult. With this change, the new
debug.witness.output_channel sysctl allows one to specify that witness
output is to be printed to the kernel log (using log(9)) rather than the
console.
Reviewed by: cem, jhb
MFC after: 2 weeks
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4183
branded as well as unbranded binaries. This will be required to add
support for the new ELFv2 ABI on powerpc64, which is distinguished from
ELFv1 by the contents of the ELF header's flags field.
Reviewed by: imp
MFC after: 2 weeks
- While at it, arrange #ifndefs in kern_dump.c more intelligently; it's
rather confusing to have multiple competing and/or unused functions in
the kernel.
during iteration instead of relocking it for each traversed rule.
Reviewed by: mjg@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4110
new return codes of -1 were mistakenly being considered "true". Callout_stop
now returns -1 to indicate the callout had either already completed or
was not running and 0 to indicate it could not be stopped. Also update
the manual page to make it more consistent no non-zero in the callout_stop
or callout_reset descriptions.
MFC after: 1 Month with associated callout change.
certain kernel structures for use by debuggers. This mostly aids
in examining cores from a kernel without debug symbols as a debugger
can infer these values if debug symbols are available.
One set of variables describes the layout of 'struct linker_file' to
walk the list of loaded kernel modules.
A second set of variables describes the layout of 'struct proc' and
'struct thread' to walk the list of processes in the kernel and the
threads in each process.
The 'pcb_size' variable is used to index into the stoppcbs[] array.
The 'vm_maxuser_address' is used to distinguish kernel virtual addresses
from user addresses. This doesn't have to be perfect, and
'vm_maxuser_address' is a cheap and simple way to differentiate kernel
pointers from simple values like TIDs and PIDs.
While here, annotate the fields in struct pcb used by kgdb on amd64
and i386 to note that their ABI should be preserved. Annotations for
other platforms will be added in the future.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D3773
should be used by TCP for sure in its cleanup of the IN-PCB (will be coming shortly).
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D4076
If you attempt to set a pcpu limit that is higher than
110% using rctl (for instance, you want a jail to be
able to use 2 cores on your system so you set pcpu to
200%) the thing you are trying to limit becomes unthrottled.
PR: 189870
Submitted by: dustinwenz@ebureau.com
Reviewed by: trasz
MFC after: 1 week
as otherwise most of the time is spent resolving UIDs to names.
Reviewed by: mjg@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4059
variable during mp_start() which is too late. Move this to mp_setmaxid()
where other architectures set it and move x86 assertions to MI code.
Reviewed by: kib (x86 part)
is non-zero.
- Include the process address in the PROC_ASSERT_HELD() and
PROC_ASSERT_NOT_HELD() assertion messages so that the corresponding
process can be found easily when debugging.
MFC after: 1 week
Use the right intmax_t type instead of intptr_t in a few remaining
places.
Add support for CTLFLAG_TUN for the new fixed with types. Bruce will be
upset that the new handlers silently truncate tuned quad-sized inputs,
but so do all of the existing handlers.
Add the new types to debug_dump_node, for whatever use that is.
Bump FreeBSD_version again, for good measure. We are changing
SYSCTL_HANDLER_ARGS and a member of struct sysctl_oid to intmax_t.
Correct the sysctl typed NULL values for the fixed-width types. (Hat
tip: hps@.)
Suggested by: hps (partial)
Sponsored by: EMC / Isilon Storage Division
Things seem to get stuck in low memory conditions where no bufs are available,
the reclamation path is called to wakeup the daemon, but no sleeping is done.
Because of this, we are stuck in a tight loop in the current process and
never run said reclamation path.
This was introduced in r289279 . This is only a temporary workaround
to restore system usefulness until the more permanent solutions can be
found.
Tested:
* Carambola2, 64MB (and 32MB by manual config.)
Add S8, S16, S32, and U32 types; add SYSCTL*() macros for them, as well
as for the existing 64-bit types. (While SYSCTL*QUAD and UQUAD macros
already exist, they do not take the same sort of 'val' parameter that
the other macros do.)
Clean up the documented "types" in the sysctl.9 document. (These are
macros and thus not real types, but the manual page documents intent.)
The sysctl_add_oid(9) arg2 has been bumped from intptr_t to intmax_t to
accommodate 64-bit types on 32-bit pointer architectures.
This is just the kernel support piece; the userspace sysctl(1) support
will follow in a later patch.
Submitted by: Ravi Pokala <rpokala@panasas.com>
Reviewed by: cem
Relnotes: no
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D4091
not be found. Otherwise, relocations against such symbols will be silently
ignored instead of causing an error to be raised.
Reviewed by: kib
MFC after: 1 week
whether an error is recoverable. Always re-dirty the buffer on errors
from write requests. The invalidation we used to do for errors not EIO
doesn't need to be done for a device that's really gone, since that's
done in a different path.
Reviewed by: mckusick@, kib@