* Decouple the path supervision using a separate HB timer per path.
* Add support for potentially failed state.
* Bring back RTO.min to 1 second.
* Accept packets on IP-addresses already announced via an ASCONF
* While there: do some cleanups.
Approved by: re@
MFC after: 2 months.
right mix. Still may need some tweaks but it
appears to almost not give away too much to an
RFC2581 flow, but can really minimize the amount of
buffers used in the net.
MFC after: 3 months
the RTT that a flow will build up in buffers in
transit. It is a slight modification to RFC2581
but is more friendly i.e. less aggressive.
MFC after: 3 months
1) Add four new points that allow you to get more information
to cc algo's
2) Fix the case where user changes module on a existing TCB, in
such a case, the initialization module needs to be called on all nets.
3) Move htcp_cc structure to a union that other modules can use.
4) Add 5th point for get/set socket options for cc_module specific options
MFC after: 2 months
1) ECN was on an association basis, this is incorrect and
will not work with CMT or for that matter if the user
is sending to multiple addresses. This commit makes
ECN on a per path basis.
2) Adopt the new format for the ECN internet draft. This also
maintains compatability with old format chunks as well.
3) Keep track of the real time of a RTT down to micro seconds.
For some future conditional features (for like a data center
this is good information to have).
MFC after: 1 month
Fix the switching on/off of PF and NR-SACKs using sysctl.
Add minor improvement in handling malloc failures.
Improve the address checks when sending.
MFC after: 4 weeks
1) All bit disappears
2) The two sets of gaps (nr and non-nr) are
disjointed, you don't have gaps struck in
both places.
This adjusts us to coorespond to the new draft. Still
to-do, cleanup the code so that there are only one set
of sack routines (original NR-Sack done by E cloned all
sack code).
- When sending large PR-SCTP messages over a
lossy link we would incorrectly calculate the fwd-tsn
- When receiving large multipart pr-sctp packets we would
incorrectly send back a SACK that would renege improperly
on already received packets thus causing unneeded retransmissions.
bit of debugging afterwards):
- Fix protection code for notification generation.
- Decouple associd from vtag
- Allow vtags to have less strigent requirements in non-uniqueness.
o don't pre-hash them when you issue one in a cookie.
o Allow duplicates and use addresses and ports to
discriminate amongst the duplicates during lookup.
- Add support for the NAT draft draft-ietf-behave-sctpnat-00, this
is still experimental and needs more extensive testing with the
Jason Butt ipfw changes.
- Support for the SENDER_DRY event to get DTLS in OpenSSL working
with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon).
- Update the support of SCTP-AUTH by Peter Lei.
- Use macros for refcounting.
- Fix MTU for UDP encapsulation.
- Fix reporting back of unsent data.
- Update assoc send counter handling to be consistent with endpoint sent counter.
- Fix a bug in PR-SCTP.
- Fix so we only send another FWD-TSN when a SACK arrives IF and only
if the adv-peer-ack point progressed. However we still make sure
a timer is running if we do have an adv_peer_ack point.
- Fix PR-SCTP bug where chunks were retransmitted if they are sent
unreliable but not abandoned yet.
With the help of: Michael Teuxen and Peter Lei :-)
MFC after: 4 weeks
- Vimage prep - these are major restructures to move
all global variables to be accessed via a macro or two.
The variables all go into a single structure.
- Asconf address addition tweaks (add_or_del Interfaces)
- Fix rwnd calcualtion to be more conservative.
- Support SACK_IMMEDIATE flag to skip delayed sack
by demand of peer.
- Comment updates in the sack mapping calculations
- Invarients panic added.
- Pre-support for UDP tunneling (we can do this on
MAC but will need added support from UDP to
get a "pipe" of UDP packets in.
- clear trace buffer sysctl added when local tracing on.
Note the majority of this huge patch is all the vimage prep stuff :-)
- Adds some prepwork (Not all yet) for vimage in particular
support the delete the sctppcbinfo.xx structs. There is
still a leak in here if it were to be called plus we stil
need the regrouping (From Me and Michael Tuexen)
- Adds support for UDP tunneling. For BSD there is no
socket yet setup so its disabled, but major argument
changes are in here to emcompass the passing of the port
number (zero when you don't have a udp tunnel, the default
for BSD). Will add some hooks in UDP here shortly (discussed
with Robert) that will allow easy tunneling. (Mainly from
Peter Lei and Michael Tuexen with some BSD work from me :-D)
- Some ease for windows, evidently leave is reserved by their
compile move label leave: -> out:
MFC after: 1 week
- Bug in CA that does not get us incrementing the PBA properly which
made us more conservative.
- comment updated in sctp_input.c
- memsets added before we log
- added arg to hmac id's
MFC after: 2 weeks
sending, once the locks are all unlocked to
do the copy's in, its possible that other
events could then raise the number of bytes
outstanding pushing it so not all the message
would fit. This would then cause us to send
only part of the message. This fix makes it
so we keep a "reserved" amount that can be
kept in mind when making calculations to send.
- rcv msg args with a NULL/NULL for to/tolen will return an error incorrectly
for the 1-2-1 model.
- We were not doing 0 len return correctly and not setting cantrcv more
correctly. Previouly we "fixed" this area by taking out the socantrcv
since we then could not get the data out. The correct rix is to still
flag the socket but alow a by-pass route to continue to read until
all data is consumed.
MFC after: 1 week
- Fix panic from mutex unlock on freed lock when ASCONF-ACK
aborts an assoc
- Fix panic from addr lock recursion when ASCONFs are queued
in the front states
- ASCONFs "queued" in the front states should really be
bundled after the COOKIE-ACK, not in front of it
- Fix issue with addresses deleted in the front states from
being sent with ASCONF(DELETE)-- replaced
sctp_asconf_queue_add_sa() with delete specific function
- Comment change in sctp.h the drafts are now RFC's
Approved by: re@freebsd.org (B Mah)
the recent send code, but uio may be NULL on sendfile
calls. Change to use sndlen variable.
- EMSGSIZE is not being returned in non-blocking mode
and needs a small tweak to look if the msg would
ever fit when returning EWOULDBLOCK.
- FWD-TSN has a bug in stream processing which could
cause a panic. This is a follow on to the codenomicon
fix.
- PDAPI level 1 and 2 do not work unless the reader
gets his returned buffer full. Fix so we can break
out when at level 1 or 2.
- Fix fast-handoff features to copy across properly on
accepted sockets
- Fix sctp_peeloff() system call when no true system call
exists to screen arguments for errors. In cases where a
real system call exists the system call itself does this.
- Fix raddr leak in recent add-ip code change for bundled
asconfs (even when non-bundled asconfs are received)
- Make sure ipi_addr lock is held when walking global addr
list. Need to change this lock type to a rwlock().
- Add don't wake flag on both input and output when the
socket is closing.
- When deleting an address verify the interface is correct
before allowing the delete to process. This protects panda
and unnumbered.
- Clean up old sysctl stuff and get rid of the old Open/Net
BSD structures.
- Add a function to watch the ranges in the sysctl sets.
- When appending in the reassembly queue, validate that
the assoc has not gone to about to be freed. If so
(in the middle) abort out. Note this especially effects
MAC I think due to the lock/unlock they do (or with
LOCK testing in place).
- Netstat patch to get rid of warnings.
- Make sure that no data gets queued to inactive/unconfirmed
destinations. This especially effect CMT but also makes a
impact on regular SCTP as well.
- During init collision when we detect seq number out
of sync we need to treat it like Case C and discard
the cookie (no invarient needed here).
- Atomic access to the random store.
- When we declare a vtag good, we need to shove it
into the time wait hash to prevent further use. When
the tag is put into the assoc hash, we need to remove it
from the twait hash (where it will surely be). This prevents
duplicate tag assignments.
- Move decr-ref count to better protect sysctl out of
data.
- ltrace error corrections in sctp6_usrreq.c
- Add hook for interface up/down to be sent to us.
- Make sysctl() exported structures independent of processor
architecture.
- Fix route and src addr cache clearing for delete address case.
- Make sure address marked SCTP_DEL_IP_ADDRESS is never selected
as src addr.
- in icmp handling fixed so we actually look at the icmp codes
to figure out what to do.
- Modified mobility code.
Reception of DELETE IP ADDRESS for a primary destination and
SET PRIMARY for a new primary destination is used for
retransmission trigger to the new primary destination.
Also, in this case, destination of chunks in send_queue are
changed to the new primary destination.
- Fix so that we disallow sending by mbuf to ever have EEOR
mode set upon it.
Approved by: re@freebsd.org (B Mah)
the last message on the send stream was "null" but still
there, a state we allow, we could get hung and not clean
it up and wait for the shutdown guard timer to clear the
association without a graceful close. Fix this so that
that we properly clean up.
- Added support for Multiple ASCONF per new RFC. We only
(so far) accept input of these and cannot yet generate
a multi-asconf.
- Sysctl'd support for experimental Fast Handover feature. Always
disabled unless sysctl or socket option changes to enable.
- Error case in add-ip where the peer supports AUTH and ADD-IP
but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to
ABORT in this case.
- According to the Kyoto summit of socket api developers
(Solaris, Linux, BSD). We need to have:
o non-eeor mode messages be atomic - Fixed
o Allow implicit setup of an assoc in 1-2-1 model if
using the sctp_**() send calls - Fixed
o Get rid of HAVE_XXX declarations - Done
o add a sctp_pr_policy in hole in sndrcvinfo structure - Done
o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch!
- Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize
when we close sending out the data and disabling Nagle.
- Change key concatenation order to match the auth RFC
- When sending OOTB shutdown_complete always do csum.
- Don't send PKT-DROP to a PKT-DROP
- For abort chunks just always checksums same for
shutdown-complete.
- inpcb_free front state had a bug where in queue
data could wedge an assoc. We need to just abandon
ones in front states (free_assoc).
- If a peer sends us a 64k abort, we would try to
assemble a response packet which may be larger than
64k. This then would be dropped by IP. Instead make
a "minimum" size for us 64k-2k (we want at least
2k for our initack). If we receive such an init
discard it early without all the processing.
- When we peel off we must increment the tcb ref count
to keep it from being freed from underneath us.
- handling fwd-tsn had bugs that caused memory overwrites
when given faulty data, fixed so can't happen and we
also stop at the first bad stream no.
- Fixed so comm-up generates the adaption indication.
- peeloff did not get the hmac params copied.
- fix it so we lock the addr list when doing src-addr selection
(in future we need to use a multi-reader/one writer lock here)
- During lowlevel output, we could end up with a _l_addr set
to null if the iterator is calling the output routine. This
means we would possibly crash when we gather the MTU info.
Fix so we only do the gather where we have a src address
cached.
- we need to be sure to set abort flag on conn state when
we receive an abort.
- peeloff could leak a socket. Moved code so the close will
find the socket if the peeloff fails (uipc_syscalls.c)
Approved by: re@freebsd.org(Ken Smith)
when peer acks the add in case the routing table changes.
- Fix sctp_lower_sosend to send shutdown chunk for mbuf send
case when sndlen = 0 and sinfoflag = SCTP_EOF
- Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data,
So that it does not send the "null" data mbuf out and cause
it to get freed twice.
- Fix so auto-asconf sysctl actually effect the socket's asconf state.
- Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets.
- Memset bug in sctp_output.c (arguments were reversed) submitted
found and reported by Dave Jones (davej@codemonkey.org.uk).
- PD-API point needs to be invoked >= not just > to conform to socket api
draft this fixes sctp_indata.c in the two places need to be >=.
- move M_NOTIFICATION to use M_PROTO5.
- PEER_ADDR_PARAMS did not fail properly if you specify an address
that is not in the association with a valid assoc_id. This meant
you got or set the stcb level values instead of the destination
you thought you were going to get/set. Now validate if the
stcb is non-null and the net is NULL that the sa_family is
set and the address is unspecified otherwise return an error.
- The thread based iterator could crash if associations were freed
at the exact time it was running. rework the worker thread to
use the increment/decrement to prevent this and no longer use
the markers that the timer based iterator uses.
- Fix the memleak in sctp_add_addr_to_vrf() for the case when it is
detected that ifa is already pointing to a ifn.
- Fix it so that if someone is so insane that they drop the
send window below the minimal add mark, they still can send.
- Changed all state for associations to use mask safe macro.
- During front states in association freeing in sctp_inpcbfree, we
had a locking problem where locks were not in place where they
should have been.
- Free association calls were not testing the return value in
sctp_inpcb_free() properly... others should be cast void returns
where we don't care about the return value.
- If a reference count is held on an assoc, even from the "force free"
we should not do the actual free.. but instead let the timer
free it.
- When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED
flag is set, we must NOT process the packet but handle it like
ootb. This is because while freeing an assoc we release the
locks to get all the higher order locks so we can purge all
the hash tables. This leaves a hole if a packet comes in
just at that point. Now sctp_common_input_processing() will
call the ootb code in such a case.
- Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes
it so we don't have a conflict (I think this is a covertity change).
We made this change AFTER some conversation and looking to make sure
that M_PROTO5 does not have a problem between SCTP and the 802.11
stuff (which is the only other place its used).
- Fixed lock order reversal and missing atomic protection around
locked_tcb during association lookup and the 1-2-1 model.
- Added debug to source address selection.
- V6 output must always do checksum even for loopback.
- Remove more locks around inp that are not needed for an atomically
added/subtracted ref count.
- slight optimization in the way we zero the array in sctp_sack_check()
- It was possible to respond to a ABORT() with bad checksum with
a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT
send a PKT-DROP to any ABORT().
- Add an option for local logging (useful for macintosh or when
you need better performing during debugging). Note no commands
are here to get the log info, you must just use kgdb.
- The timer code needs to be aware of if it needs to call
sctp_sack_check() to slide the maps and adjust the cum-ack.
This is because it may be out of sync cum-ack wise.
- Added threshold managment logging.
- If the user picked just the right size, that just filled the send
window minus one mtu, we would enter a forever loop not copying and
at the same time not blocking. Change from < to <= solves this.
- Sysctl added to control the fragment interleave level which defaults
to 1.
- My rwnd control was not being used to control the rwnd properly (we
did not add and subtract to it :-() this is now fixed so we handle
small messages (1 byte etc) better to bring our rwnd down more
slowly.
Approved by: re@freebsd.org (Bruce Mah)
- use proper tick gathering macro instead of ticks directly.
- Placed reasonable boundaries on sets that a user can do
that are converted to ticks from ms.
- Fix CMT_PF to always check to be sure CMT is on.
- Fix ticks use of CMT_PF.
- put back code to allow asconfs to be queued while INITs are in flight
and before the assoc is established.
- During window probes, an ack'd packet might be left with the window
probe mark on it causing it to be retransmitted. Change so that
the flight decrease macro clears the window_probe mark.
- Additional logging flight size/reading and ASOC LOG. This
is only enabled if you manually insert things into opt_sctp.h
since its a set of debug code only.
- Found an interesting SMP race in the way data was appended which
could cause a reader to lose a part of a message, had to
reorder when we marked the message was complete to after
the data was appended.
- bug in ADD-IP for the subset bound socket case when the peer has only
one address
- fix ASCONF implicit success/error handling case
- proper support of jails in Freebsd 6>
- copy out the timeval for the 64 bit sparc world on cookie-echo
alignment error crashes without this).
Approved by: re(Ken Smith)
- CMT_PF states added (w/sysctl to turn the PF version on)
- sctp_input.c had a missing incr of cookie case when the
auth was bad. This meant a free was called without an
increment to refcnt, added increment like rest of code.
- There was a case, unlikely, when the scope of the destination
changed (this is a TSNH case). In that case, it would not free
the alloc'ed asoc (in sctp_input.c).
- When listed addresses found a colliding cookie/Init, then
the collided upon tcb was not unlocked in sctp_pcb.c
- Add error checking on arguments of sctp_sendx(3) to prevent it from
referencing a NULL pointer.
- Fix an error return of sctp_sendx(3), it was returing
ENOMEM not -1.
- Get assoc id was changed to use the sanctified socket api
method for getting a assoc id (PEER_ADDR_INFO instead of
PEER_ADDR_PARAMS).
- Fix it so a peeled off socket will get a proper error return
if it trys to send to a different address then it is connected to.
- Fix so that select_a_stream can avoid an endless loop that
could hang a caller.
- time_entered (state set time) was not being set in all cases
to the time we went established.
Approved by: re(ken smith)
- Fix so VRF's will clean themselves up when no references are around.
- Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass
normal validation checks.
- turn auto-asconf off for subset bound sockets
- Moves all logging to use KTR. This gets rid of most
of the logging #ifdef's with a few exceptions reducing
the number of config options for SCTP.
its an INIT collision case.
- Fixed RTO calc to maintain a seperate variable to track
if a RTO calc as been done, this allows the RTO var to be
doubled during initial timeouts.
- Reduces the amount of stack used by process control.
- Use a constant for the peer chunk overhead.
- Name change to spell candidate correctly.
but are a seperate call that can be re-used if needed.
- 64 bit issues
o re-arrange cookie so it is better 64 bit aligned
o For wire level things we need the packed attribute.
hold a wq lock for the iterator. Panda uses a
silly recursive lock they hold through the timer.
- Add poor mans wireshark compile option..
- Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls.
- sysctl now will get back the refcnt for viewing by onlookers.
Reviewed by: gnn
- bounded cookie-life to 1 second minimum in socket option set.
- Delayed_ack_time becomes delayed_ack per new socket api document.
- Improve port number selection, we now use low/high bounds and
no chance of a endless loop. Only one call to random per bind
as well.
- fixes so set_peer_primary pre-screens addresses to be
valid to this host.
- maxseg did not allow setting on an assoc basis. We needed
to thus track and use an association value instead of a inp value.
- Fixed ep get of HB status to report back properly.
- use settings flag to tell if assoc level hb is on off not
the timer.. since the timer may still run if unconf address
are present.
- check for crazy ENABLE/DISABLE conditions.
- set and get of pmtud (fixed path mtu) not always taking into account ovh.
- Getting PMTU info on stcb only needs to return PMTUD_ENABLED if
any net is doing PMTU discovery.
- Panic or warning fixed to not do so when a valid ip frag is
taking place.
- sndrcvinfo appearing in both inp and stcb was full size, instead
of the non-pad version. This saves about 92 bytes from each struct
by carefully converting to use the smaller version.
- one-2-one model get(maxseg) would always get ep value, never the
tcb's value.
- The delayed ack time could be under a tick, this fixes so
it bounds it to at least 1 tick for platforms whos tick
is more than a ms.
- Fragment interleave level set to wrong default value.
- Fragment interleave could not set level 0.
- Defered stream reset was broken due to a guard check and ntohl issue.
- Found two lock order reversals and fixed.
- Tighten up address checking, if the user gives an address the sa_len
had better be set properly.
- Get asoc by assoc-id would return a locked tcb when it was asked
not to if the tcb was in the restart hash.
- sysctl to dig down and get more association details
Reviewed by: gnn
- Fixed RTOinfo for bounding.
- Fixed connect() to return ECONNREFUSED when an ABORT is received.
- Added comments to direct Static Analysis not to look at some things
it does not understand (comments are /* sa_ignore XXXXX */)
- Bind when colliding was broken, missing not_found = 1 before
checking to see if the port was in use caused endless bind loop.
- Cookie life needs to be in milliseconds to conform to socket api.
- Cookie life is not supposed to change if its 0, On the assoc
level set we changed it to 0 opps.
- Two more static analysis issues identified by the cisco
tool. Null checks needed.
- An issue for sendfile(). Need to validate the correct
input argument.
- When sending failed due to a no route to host, we leaked
the mbuf chain failing to call m_freem().
- Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined
Reviewed by: gnn
- PR-SCTP would ignore FWD-TSN's above a rwnd's worth
of TSN's (1 byte msgs).. this left the peer hopelessly
out of sync.. or an attacker. So now we abort the assoc.
- New IFN hash, also rename hashes to match addr/ifn now
that the vrf has multiple.
- Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default
as defined in the Socket API ID.
- Export MTU information via sysctl.
- Vrf's need table id's. This is default for
BSD, but may be other things later when BSD
fully supports VRFs.
- Additional stream reset bug (caught by cisco dev-test).
- Additional validations for the address in sending a message (socket api).
-------- and -----
- Fix association notifications not to give the active open
side false notifications.
- Fix so sendfile and SENDALL will work properly (missing
flag to say socket sender is done).
- Fix Bug that prevented COOKIES from being retransmitted.
- Break out connectx into helper sub-models so that iox routines can
reuse the helpers.
- When an address is added during system init (non-dynamic mode) make
sure that the "defer use" flag is not set.
** its compiling on XR now :-D **
Reviewed by: gnn
set/clear it but would not do it. Now we will.
- Moved to latest socket api for extended sndrcv info struct.
- Moved to support all new levels of fragment interleave (0-2).
- Codenomicon security test updates - length checks and such.
- Bug in stream reset (2 actually).
- setpeerprimary could unlock a null pointer, fixed.
- Added a flag in the pcb so netstat can see if we are listening easier.
Obtained from: (some of the Listen changes from Weongyo Jeong)
set/clear it but would not do it. Now we will.
- Moved to latest socket api for extended sndrcv info struct.
- Moved to support all new levels of fragment interleave.
- moved away from ifn/ifa access to sctp_ifa/sctp_ifn
built and managed by the add-ip code.
- cleaned up add-ip code to use the iterator
- made iterator be a thread, which enables auto-asconf now.
- rewrote and cleaned up source address selection (also
made it use new structures).
- Fixed a couple of memory leaks.
- DACK now settable as to how many packets to delay as
well as time.
- connectx() to latest socket API, new associd arg.
- Fixed issue with revoking and loosing potential to
send when we inflate the flight size. We now inflate
the cwnd too and deflate it later when the revoked
chunk is sent or acked.
- Got rid of some temp debug code
- src addr selection moved to a common file (sctp_output.c)
- Support for simple VRF's (we have support for multi-vfr
via compile switch that is scrubbed from BSD but we won't
need multi-vrf until we first get VRF :-D)
- Rest of mib work for address information now done
- Limit number of addresses in INIT/INIT-ACK to
a #def (30).
Reviewed by: gnn
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.comtuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0
So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.
I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)
There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..
If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)
Reviewed by: gnn
Approved by: gnn
