80352 Commits

Author SHA1 Message Date
raj
65cd95baea Do not force verbose and single mode in non-metadata boot case.
We want to go multi-user by default also in case of booting without loader(8).
2010-02-24 20:31:00 +00:00
jkim
f819ca27dd Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'.
The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
brucec
83c4cf226c Update the commented out option for omitting the sysctl descriptions; it
was committed as NO_SYSCTL_DESCR.

Approved by:	rrs (mentor)
2010-02-24 19:28:15 +00:00
bz
44a0d7a588 Use the DB_SHOW_ALL_COMMAND() macro to register the formerly 'show ifnets'
in the db_show_all_table as 'show all ifnets' and with that follow the
convention for showing complete lists.

Submitted by:	thompsa
MFC after:	3 days
2010-02-24 15:54:24 +00:00
brooks
e7e1754f54 Don't inforce an upper bound on kern.ngroups. The INT_MAX-1 limit was
too high due to several overflows.  The actual limit is somewhere in the
neighborhood of INT_MAX/4 on 64-bit machines, but most systems could not
support such a limit due to a lack of memory and the cost of duplicate
credentials.

Reported by:	bde
2010-02-24 15:52:18 +00:00
np
b48fc8c497 There is no need to test __FreeBSD_version for features that have
been around for a long time now (7.1-ish or even earlier); assume
they are present.  These includes MSI, TSO, LRO, VLAN, INTR_FILTERS,
FIRMWARE, etc.

Also, eliminate some dead code and clean up in other places as part
of this quick once-over.

MFC after:	1 week
2010-02-24 10:16:18 +00:00
np
66381a9263 Accessing an mbuf after it has been handed off to the hardware is a bad
race as it could already have been tx'd and freed by that time.  Place
the bpf tap just _before_ writing the gen bit.

This fixes a panic when running tcpdump on a cxgb interface.
2010-02-24 01:44:39 +00:00
nwhitehorn
8e85b4c372 Add the ability to set SMU-based machines to restart automatically after
power loss.
2010-02-24 01:27:36 +00:00
nwhitehorn
0150e93df9 Use dcbz instead of word stores for page zeroing, providing a factor of
3-4 speedup.
2010-02-24 00:55:55 +00:00
nwhitehorn
853eaef79a Close a race involving the OEA64 scratchpage. When the scratch page's
physical address is changed, there is a brief window during which its PTE
is invalid. Since moea64_set_scratchpage_pa() does not and cannot hold
the page table lock, it was possible for another CPU to insert a new PTE
into the scratch page's PTEG slot during this interval, corrupting both
mappings.

Solve this by creating a new flag, LPTE_LOCKED, such that
moea64_pte_insert will avoid claiming locked PTEG slots even if they
are invalid. This change also incorporates some additional paranoia
added to solve things I thought might be this bug.

Reported by:	linimon
2010-02-24 00:54:37 +00:00
jkim
1f5a49bf17 Yet another attempt to make palette loading more safer:
- Add a separate palette data for 8-bit DAC mode when SC_PIXEL_MODE is set
and fill it up with default gray-scale palette data for text.  Now we don't
have to set `hint.sc.0.vesa_mode' to get the default palette data.
- Add a new adapter flag, V_ADP_DAC8 to track whether the controller is
using 8-bit palette format and load correct palette when switching modes.
- Set 8-bit DAC mode only for non-VGA compatible graphics mode.
2010-02-23 21:51:14 +00:00
emaste
de16302b40 Minor diff reduction with Adaptec's driver: in aac_release_command() set
cm_queue to AAC_ADAP_NORM_CMD_QUEUE by default.  In every place it was set,
it was set to AAC_ADAP_NORM_CMD_QUEUE anyhow.
2010-02-23 21:41:13 +00:00
weongyo
ccd063c776 o adds sysctl variables to show device statistics.
o records RTS success/fail statistics.

Pointed by:	imp
2010-02-23 19:55:54 +00:00
weongyo
6784b4b28a fixes a compile error; invalid type argument of '->'. 2010-02-23 19:44:51 +00:00
mav
c847086ff1 Make xpt_rescan() more correct, as it was before r197208: do not use
XPT_SCAN_LUN for wildcard LUN, fall back to XPT_SCAN_BUS.
2010-02-23 18:42:07 +00:00
mav
8e4f336600 Fix recursive lock attempt on hot-plug event in non-ATA_CAM mode. 2010-02-23 16:39:53 +00:00
ivoras
f5d0be40c9 The New and Improved snake_server - Service Pack 1: now even more
sensitive to load average variations!
2010-02-23 15:27:07 +00:00
ivoras
b36002aea7 Upgrade the "snake" syscons screensaver to the new, multimedia version!
Now, with color! And system load averages!

Amused by it:	gnn
2010-02-23 15:12:41 +00:00
mjacob
44c8f3e4cb xpt_rescan only honors a wildcard in the target field. Revert the previous
change and have isp_make_here scan the whole bus which will then scan all
luns.

I think xpt_rescan needs to be fixed, but that's a separable issue.

Suggested by: Alexander
2010-02-23 14:35:44 +00:00
imp
d1674995a5 Fix compilation problems with INVARIANTS.
# also limit RX decryption attempted messages to 50

Reviewed by:	weongyo
2010-02-23 05:02:10 +00:00
jkim
599d49780e Re-add accidentally removed pixel format for direct memory model. 2010-02-23 01:02:11 +00:00
jkim
a2e74371fc Fix FBIO_ADPINFO ioctl on amd64. 2010-02-23 01:00:19 +00:00
mjacob
7881322c02 When we rescan, just scan from logical unit 0. In other words, don't
specify a wildcard lun here.

This unbreaks disk re-arrival.

MFC after:	2 days
2010-02-23 00:34:20 +00:00
yongari
79836e2e58 Remove Tx mbuf parsing code for VLAN in TSO path. Controller does
not support TSO over VLAN if VLAN hardware tagging is disabled so
there is no need to check VLAN here.
2010-02-22 23:35:35 +00:00
yongari
21b36471d3 Add TSO support on VLANs. Also make sure to update TSO capability
whenever jumbo frame is configured.
While I'm here remove unnecessary check of VLAN hardware checksum
offloading. vlan(4) already takes care of this.
2010-02-22 22:41:27 +00:00
yongari
6009cffa64 Add TSO support on VLANs. jme(4) controllers do not require VLAN
hardware tagging to make TSO work over VLANs.
2010-02-22 22:05:49 +00:00
yongari
e524f2b3a5 Remove Tx mbuf parsing code for VLAN in TSO path. Controller does
not support TSO over VLAN if VLAN hardware tagging is disabled so
there is no need to check VLAN here.
While I'm here make sure to pullup IP/TCP headers in the first
buffer.
2010-02-22 21:03:15 +00:00
marius
932d8e0a7f According to the Linux sungem driver, in case of Apple (K2) GMACs
GEM_MIF_CONFIG_MDI0 cannot be trusted when the firmware has powered
down the chip so the internal transceiver has to be hardcoded. This
is also in line with the AppleGMACEthernet driver, which just doesn't
distinguish between internal/external transceiver and MDIO/MDI1
respectively in the first place. Tested by: Andreas Tobler

MFC after:	1 week
2010-02-22 21:01:08 +00:00
mav
be2b9d35a5 Virtualize transport part of periph announcement. 2010-02-22 19:17:17 +00:00
yongari
ede2ded51d Add TSO on VLANs. Because re(4) has a TSO limitation for jumbo
frame, make sure to update VLAN capabilities whenever jumbo frame
is configured.
While I'm here rearrange interface capabilities configuration. The
controller requires VLAN hardware tagging to make TSO work on VLANs
so explicitly check this requirement.
2010-02-22 18:51:14 +00:00
nwhitehorn
896dff6fe7 Provide a new useless feature: an led(4) interface for the system's sleep
LED.
2010-02-22 18:49:43 +00:00
mav
48a4a57e8d Oops! Wrong word order. :( 2010-02-22 17:34:35 +00:00
gibbs
8777b48fd9 Enforce stronger semantics for bus-dma alignment (currently only on amd64).
Now all contiguous regions returned from bus-dma will be aligned to the
alignment constraint and all but the last region are guaranteed to be
a multiple of the alignment in length.  This also means that the relative
alignment of two adjacent bytes in the I/O stream have a difference of 1
even if they are not physically contiguous.

The old code, when needing to perform a copy in order to align data, only
copied the amount of data needed to reach the next page boundary.  This
often left an unaligned end to the segment.  Drivers such as Xen's blkfront
can't deal with such segments.

The downside to this approach is that, once an unaligned region is encountered,
the remainder of the I/O will be bounced.  However, bouncing should be rare.
It is typically caused by non-performance critical userland programs that
don't bother to align their I/O buffers (e.g. bsdlabel).  In-kernel I/O
buffers are always aligned to at least a page boundary.

Reviewed by:	scottl
MFC after:      2 weeks
2010-02-22 17:03:45 +00:00
gallatin
4c0d544d24 Update mxge to support IFCAP_VLAN_HWTSO.
Note: If/when FreeBSD supports TSO over IPv6, the minimal mxge fw
rev to enable IFCAP_VLAN_HWTSO will need to be increased to 1.4.37
2010-02-22 16:57:03 +00:00
mav
ece1c414fe Add Intel PCH SATA controller IDs. 2010-02-22 16:27:47 +00:00
rwatson
79e4f88402 Fix constant assignment for netisr protocol information sysctl.
MFC after:	1 week
Spotted by:	bz
2010-02-22 16:16:16 +00:00
kib
a638c3a888 Remove write-only variable.
MFC after:	3 days
2010-02-22 16:00:56 +00:00
rwatson
ac0cbafef7 Export netisr configuration and statistics to userspace via sysctl(9).
MFC after:	1 week
Sponsored by:	Juniper Networks
2010-02-22 15:03:16 +00:00
rpaulo
7028f4570c Fix previous commit: led_func() doesn't exist, it should be fled_cb().
Pointed out by:	bz
2010-02-22 14:49:52 +00:00
nwhitehorn
a9f2786d08 Allow user programs to execute mfpvr instructions. Linux allows this, and
some math-related software like GMP expects to be able to use it to pick
a target appropriately.

MFC after:	1 week
2010-02-22 14:17:23 +00:00
mav
6941483833 Improve output for controllers that doesn't report SATA speed. 2010-02-22 10:45:40 +00:00
neel
6fc9b03b75 Use KERNLOADADDR instead of hardcoded address. This is required to be able to
build the trampoline kernel that has symbol/string tables embedded within it.
2010-02-22 01:48:38 +00:00
marcel
9168186326 Use mf and not mf.a. The latter doesn't force memory ordering and
applies to sequential memory.
2010-02-22 01:24:34 +00:00
marcel
27371be823 Prefer I-units and M-units for nop instructions. This works around
McKinley flaws. It also avoids using the F-unit in the kernel for
no reason.
2010-02-22 01:23:41 +00:00
marcel
61400e541a Normalize nop instructions: Only use 0 for the immediate operand. 2010-02-21 23:41:59 +00:00
marcel
710af9deaa Remove pm_active from struct pmap as it serves no purpose.
MFC after:	1 week
2010-02-21 23:10:13 +00:00
alc
eeebe8a449 Align the start of the clean submap to a superpage boundary. Although
no superpage mappings are created within the clean submap, aligning the
start of the clean submap helps to prevent interference with kmem_alloc()'s
use of superpages.
2010-02-21 22:23:13 +00:00
nwhitehorn
8f393f2bb8 Add a simple fan management callout to the SMU driver. This is designed
such that a fancier thermal management algorithm can be run from user
space, but the kernel will at least ensure your machine does not either
sound like a wind tunnel or catch fire.
2010-02-21 22:13:57 +00:00
nwhitehorn
2fb147f12c Fix several mistakes in this file, in order to allow individual fan speeds
to be read and set correctly.
2010-02-21 21:03:37 +00:00
ed
6c820f6479 Decompose the most lousy named file in sys/kern; kern_subr.c.
Although this file has historically been used as a dumping ground for
random functions, nowadays it only contains functions related to copying
bits {from,to} userspace and hash table utility functions.

Behold, subr_uio.c and subr_hash.c.
2010-02-21 19:53:33 +00:00