brand early in the process of loading an elf file, so that we can
identify the sysentvec, and so that we do not continue if we do not
have a brand (and thus a sysentvec). Use the values in the sysentvec
for the page size and vm ranges unconditionally, since they are all
filled in now.
i4bq931, i4b, isic, iwic, ifpi, ifpi2, ifpnp, ihfc, and itjc are
no longer count devices. Also remove a few other instances of N<DEVICE>
being used to control compilation of whole files.
Reviewed by: hm
a) we don't believe what the board tells us all the time (if the BIOS
hasn't run, port page 2 and port page 0 tend to be garbage)
b) add the missing code to set parameters for the SPI cards.
MFC after: 0 days
sysentvec. Initialized all fields of all sysentvecs, which will allow
them to be used instead of constants in more places. Provided stack
fixup routines for emulations that previously used the default.
linux_emul_find() that does not use stack gap storage but instead
always returns the resulting path in a malloc'd kernel buffer.
Implement linux_emul_find() in terms of this function. Also add
LCONVPATH* macros that wrap linux_emul_convpath in the same way
that the CHECKALT* macros wrap linux_emul_find().
a kernel-internal kern_*() version and a wrapper that is called via
the syscall vector table. For paths and structure pointers, the
internal version either takes a uio_seg parameter or requires the
caller to copyin() the data to kernel memory as appropiate. This
will permit emulation layers to use these syscalls without having
to copy out translated arguments to the stack gap.
Discussed on: -arch
Review/suggestions: bde, jhb, peter, marcel
on -current. Actually copy in data from userspace to kernel in the
linux-compat ioctl path. Make sure ioctl sizes are as expected in the handler
functions.
Reviewed by: rwatson
right places, and so it's sorted consistently with how all the other N-hundreds
of files ding this do it.
Submitted by: Hiten Pandya <hiten@uk.FreeBSD.org>
Don't expect all RIDs to be PCI rids. The previous code made at
least 1 mistake, even for PCI.
Give the card definitions a chance to specify a init function.
Use this instead of the gross superio hack.
Move the win877 init function to puc_pci.c where it belongs.
RIDs can actually be zero, don't set badmuxed if so.
Set a less incorrect end for the construct SYS_RES_IOPORT entries,
I guess both sio and lpt happen to use 8 IO ports, but that shouldn't
really be hardcoded this way.
Fixup puc_pccard.c to match.
We're getting closer.
Don't set the CCR_OPTION register when registering/deregistering
interrupts unless the card is a MFC card. This makes a lot of cards
work that didn't work before. These bits are only defined for MFC
cards.
Remove COOKIE_FOR_WARNER kludges that phk introduced.
Add more debug info.
Annoy the purists by committing two minor style nits at the same time.
Many thanks to phk. He tracked this problem down to what was screwing
things up, so fixing it became trivially easy once the problem was
understood.
This feature can be disabled via the AHD/AHC_REG_PRETTY_PRINT kernel
option.
The ahc driver now uses the same debug options mechanism as ahd:
AHC_DEBUG - Compile in debugging code
AHC_DEBUG_OPTS - String of debug options as listed in aic7xxx.h
This ensures that we don't enter our interrupt handler until
all OSM components it might reference have been fully initialized
during attach.
Remove vestiges of untagged queue handling.
Add hints to ahd_get_scb() so it knows what type of SCB collision
management to perform for each new transaction.
Properly disable/enable IU_REQ with changes in tagged queuing and
disconnection settings passed in by CAM.
Uninline some routines that are just too big to be inlined.
Add some helper macros for SCB ID collision management.
Use a hardware SCB rather than a full SCB for the "next
SCB to queue" sentinal.
Update for new "high SCBID bit" qoutfifo delivery scheme.
If interrupts are disabled on the card, don't bother running
our interrupt handler. Our handler was called due to a shared
interrupt, and the card's interrupts are explicitly disabled
to prevent entry into our interrupt handler.
functions for register pretty-printing.
Implement "top bit of SCBID is valid bit" qoutfifo delivery scheme.
"the the" -> "the".
Remove old and never used tag collision chain handling in the
sequencer. Tag collisions are never allowed to get as far as
on the controller.
Simplify busy target table handling routines.
Update comments to reflect reality.
Add support for catching more protocol violations.
Correct a bug in data fifo handling in mixed packetized and
non-packetized environments. SG_STATE must be cleared even
if an SG fetch is not in progress at the time of FIFO shutdown
or we may confuse the non-packetized transaction idle-loop.
busy target table addressing changes, our qoufifo scheme,
and long lun support.
Drop bus reset hold delay to 25us.
Remove chip workarounds for revisions that never went to
production.
Add aic7901A identification information.
Remove untagged queue logic.
Push protocol violation handler to its own routine. We now
properly detect and recovery from the following target induced
protocol violations:
o Unexpected or invalid non-packetized Relesection
o Command complete with no status message
o Good Status after incomplete cdb transfer
Add an SCB collision avoidance algorithm that allows us to
use all 512 SCBs for non-packetized operations. There is
still the possibility of running out of SCBs with non-colliding
tag identifiers, but the algorithm ensures that the stall will
be rare and short lived.
Convert to a read-only algorithm for validing entries in the
qoufifo. The sequencer now toggles the high bit of the SCB
identifier on each wrap around of the qinfifo. If the high
bit doesn't match the expected value for this pass of the
qoufifo, the entry is not valid. This has the benefit of
working on machines that have large granularity cache write
back semantics without requiring any additional memory.
Remove lots of code related to untagged SCB queues. Since
these controllers can keep a fully busy target table, we
will never have untagged SCB queues.
Lots of improvements to diagnostic logging.
Clarify some comments.
Don't clear BUSFREE interrupt enable in SIMODE1 in the SELTO
handler. Just clearing the interrupt status is sufficient and
this avoids the chance of disabling busfree detection in connection
that occurs while we are handling the busfree interrupt.
Clear all possible interrupt sources when handling a busfree
interrupt. The hardware clears some but not all of them.
Don't panic if we get into the default SCSIINT handler.
Dump the card state and clear all interrupt sources in the
hope that we can continue.
LASTPHASE != PREVPHASE. Use the correct PREVPHASE for testing
against values in the PERRDIAG register.
According to SPI4, the bus free that is required after certain
PPR negotiations will only occur at the end of all message phases.
Handle the bus free if it occurs after a transaction in either
the message-in or message-out phases. The busfree can also occur
if the status of IU_REQ changes due to a WDTR or SDTR message.
We now set the expect busfree flag in ahd_set_syncrate so that
it works regardless of message type.
Correct a problem with missing certain busfree events. The
chip supports single-stepping even if a SCSIINT is pending.
This obviates the need to clear all of the SCSI interrupt enables
prior to single stepping. Since ENBUSFREE can only be disabled
manually and not re-enabled, avoiding touching this bit in the
single-step case yields reliable bus free detection.
Enhance ahd_clear_intstat to clear all SCSIINT sources.
Only use ahd_update_pending_scbs() if we are active on the
bus. We cannot modify the "MK_MESSAGE" bits on SCBs in the
execution queue if a selection might be in process since
the sequencer uses this bit to detect PPR negotiation to
a target with an outstanding IU_REQ agreement.
Allocate the SCB delivery mechansim's sentinal SCB specially
so we don't waste a valid SCB for this task.
Move tranceive state settle logic to ahd_chip_init() since
this needs to occur after every chip reset, not just the
chip reset that happens during primary driver initialization.
Correct a bug with transmitting lun information in packetized
connections.
Restrict busy target table operations to the range of luns
that can be used for non-packetized connections. Larger luns
can only be accessed in packetized mode.
Correct a busy target table addressing bug.
Be more careful about how we shutdown the DMA engines during
bus reset events.
Only freeze the SIMQ once regardless of the number of bus
reset events that occur while we are polling for the resets
to stop.
Don't rely on the sequencer remaining paused() during our
reset poll. It is safe for the sequencer to run during this
time, and many callers to the bus reset code would need to
be modified to make this assumption universally true.
Even if we are not going to clobber SCB state when an auto-request
sense SCB has a check condition, we must still unfreeze the queue.
Re-arrange the BAD STATUS handler to handle this case appropriately.
Modify the SCB download size depending on whether long luns are
being stored in the SCB.
Add ahd_print_register() for pretty printing register diagnostics.
Don't trust that the flexport logic to detect the presence of
a seeprom is available. It may not be on some motherboard
implementations.
"the the" -> "the"
our interrupt handler. Our handler was called due to a shared
interrupt, and the card's interrupts are explicitly disabled
to prevent entry into our interrupt handler.
Set the AHC_LSCBS_ENABLED softc flag appropriately.
Convert to using softc storage for our seeprom data.
Break seeprom parsing out into a separate routine.
Change our policy in regards to AHC_SPIOCAP so that we
will allow auto-termination to take place on some aic7855
based cards.
Remove initialized but never really used variables.
Use "offset == 0" not "period == 0" to denote async trasnfers.
Implement TARG_IMMEDIATE_SCB non-disconnected target mode
SCB delivery scheme.
In our timeout handler, don't rely on the phase already being
set to denote an active connection. IDENTIFY_SEEN is more
than sufficient.
Verify that the softc passed in ahc_detach is still known
to the driver before blindly using it.
functions for register pretty-printing.
Only clear SELDO once we've recorded enough information for
the host to understand that the connection is valid. The
host uses the SELDO status as a handshake to close this
race window.
Correct a bug in target mode handling of non-disconnected
transactions. The host would indicate the correct SCB to
DMA by setting the SCB id in the currently selected hardware
SCB. Unfortunately, we would then immediated allocate a
hardware SCB which, depending on the access patern might not
be the same hardware SCB that the host setup for us. Avoid
this by having the host put the SCBID into scratch ram.
Document the SXFRCTL2 register found on U2 and U160 controllers.
Overload the MWI_RESIDUAL field for use as the SCB to be downloaded
for "immediate" (or those without the disconnect privledge)
transactions.
Add scratch ram locations for the 274X that give us a bit more
information including whether to enable extended translation.
value slipped in from a debugging session.
Add AHC_LSCBS_ENABLED and AHC_SCB_CONFIG_USED ahc_flags which
allow for some code to move to the core.
Remove extern for ahc_syncrates[]. The OSMs no longer need
direct access to this array.
Add serial eeprom field to the ahc softc.
Prototype ahc_search_untagged_queues() and ahc_print_register().
Convert to AHC_SHOW_XXX debug option format.
Switch to using the same AHC_SHOW_XXX format as the ahd driver.
Always give the target a MSG_INITIATOR_DET_ERR for unexpected
DT or ST phase errors.
Add AHC_SHOW_SELTO diagnostics.
Force renegotiation whenever an unexpected bus free occurs
to rule out a negotiation mismatch as the cause for the error.
Use "offset != 0" as an intenal indicator of "async" rather than
using a period of 0.
In ahc_fetch_devinfo(), correct a bug in getting "our id" as
target. We weren't looking at all the SEQ_FLAGS that indicate
that we are still in a selected rather than reselected state.
Add support for the AHC_SHOW_MESSAGES debugging option.
If ahc_parse_msg() tells us to terminate the message loop,
do so without acking the message. The message may be one
that the sequencer needs to handle on its own.
In ahc_parse_msg() return MSGLOOP_TERMINATED for all messages
the sequencer handles.
Allocate storage for, and track, seeprom contents in our softc.
Touch all SCB bytes to avoid parity errors should one of our
debugging routines read an otherwise uninitiatlized byte.
S/G lists must be 8 byte aligned. Reflect this in our DMA tag.
"the the" -> "the" in a comment
When pausing the card to perform error recovery, ensure that we
are not in the process of being selected or have just been selected
but have not yet handled that selection. This leaves only one other
race window, in the command complete handler, that needs to be fixed
to make recovery 100% bullet proof.
Convert a few straglers from bsd u_intX_t to inttypes uintX_t.
Remove unused variables.
Split out searching of the untagged holding queues to its own
routine. In certain recovery scenarios, we want to just
remove entries in the untagged queue without touching related
transactions that are in the QINFIFO or WAITING queues that are
searched by ahc_search_qinfifo().
Add an implementation of the ahc_print_register() routine which
"pretty prints" registers. The extra bloat in the form of string
tables for this feature is controlled by the AHC_REG_PRETTY_PRINT
option.
Fix a few bugs in ahc_enable_lun() that could prevent controllers
lacking the multiple-target-id feature from changing "our id" on
the fly. Add a large comment to this section while I'm here
describing the restrictions on "id switching".
Honor the extended translation setting for EISA cards now that
I've determined where this information is kept.
Defer card interrupt enabling to the OSM since it may have
some initialization to perform that must occur before interrupts
can be enabled.
Don't attempt to follow null pointers for zombie processes in db_ps().
Style fix: use explicit an comparison with NULL for all null pointer
checks in db_ps() instead of for half of them.
db_interface.c:
Fixed ddb's handling of traps from with ddb on i386's only.
This was mostly fixed in rev.1.27 (by longjmp()'ing back to the top
level) but was completly broken in rev.1.48 (by not unwinding the new
state (mainly db_active) either before or after the longjmp(). This
mostly never worked for other arches, since rev.1.27 has not been ported
and lower level longjmp()'s only handle traps for memory accesses. All
cases should be handled at a lower level to provided better control and
simplify unwinding of state.
Implementation details: don't pretend to maintain db_active in a nested
way -- ddb cannot be reentered in a nested way. Use db_active instead
of the db_global_jmpbuf_valid flag and longjmp()'s return value for things
related to reentering ddb. [re]entering is still not atomic enough.
very pervasive in this code. This fixes a few of those assumptions and
band-aids over some others.
Tested on: ia32 alpha sparc64
Reviewed by: peter jake (in concept)
compat code. Clean up accounting for multiple segments. Part 1/2.
Submitted by: Andrey Alekseyev <uitm@zenon.net> (with some modifications)
MFC after: 3 days
At the front is btxldr, in the middle is BTX itself (our mini-kernel), and
then the 'client' (loader.bin) which is the actual loader itself. boot2
just executes a raw ELF or a.out binary with the only setup provided being
that a bootinfo structure is passed on the stack. Now, since loader.bin
is a BTX client, the loader needs to be able to locate a BTX kernel for
the client to execute in the context. Thus, just like pxelder, btxldr
uses the a.out header on the loader binary to find the BTX kernel stored
in the loader and set it up. It does _not_ just reuse the BTX kernel
that boot2 invoked it with. This is because it can't assume that it will
_have_ a "spare" BTX kernel lying around. For example, when cdboot
loads the loader there isn't an existing BTX kernel. In fact, cdboot
will only work with an a.out loader as well since it also "borrows" the
BTX kernel in the loader binary (which it finds by parsing the a.out
header) just as pxeldr does. The only difference between cdboot and
pxeldr is where they get /boot/loader from.
If we wanted to make /boot/loader be an actual ELF binary we would need
to change the following utilites to handle that (and they all have to be
able to handle locating the BTX kernel inside of an ELF binary somehow):
- btxldr
- pxeldr
- cdboot
If we didn't want to require a flag day but make the transition smooth
then we need to be able to support both a.out and ELF versions of
/boot/loader which isn't exactly trivial since all three of these utilities
are written in assembly.
Pointy-hat to: peter
Fix device hints entry for disabling acpi(4).
This also should fix the arbitration with apm(4) when both drivers
are enabled.
Note that your /boot/device.hints needs to be updated if you want to
stop auto-loading acpi.ko or disable acpi(4).
attach. If it can't get that (highly likely if loaded as a module on
a system that's been up for a while), give a more descriptive error
message.
Also clean up some nearby style nits.
MFC after: 2 days
in the original hardwired sysctl implementation.
The buf size calculator still overflows an integer on machines with large
KVA (eg: ia64) where the number of pages does not fit into an int. Use
'long' there.
Change Maxmem and physmem and related variables to 'long', mostly for
completeness. Machines are not likely to overflow 'int' pages in the
near term, but then again, 640K ought to be enough for anybody. This
comes for free on 32 bit machines, so why not?
Replace dual copyright with a plain BSD style copyright assigned
to LSI Logic. This is still within the intents of express consent
from LSI.
MFC after: 2 days
specifically allows for (via 'BSD Style' licensing) source && binary
redistribution.
Pointy hat to: Matt, for not getting this done ahead of time.
MFC after: 2 days
the minimum of either physmem or KVA. But.. btoc() casts the address
to (unsigned int). This is NOT GOOD on 64 bit machines and on alpha and
ia64, this results in a buffer limit of around 500K (not megs). This
causes extreme disk access problems on alpha and ia64. Since this cast
is simply to ensure that it is unsigned, use 'vm_offset_t' instead. This
is available because it is already defined in types.h.
Alpha has been suffering from this for ages. It always felt like the
caching wasn't working, and unfortunately it turned out that way. :-(
idle. What was there before was surprisingly ALMOST correct.
Peter and I fried our brains on this for a couple of hours figuring out
what this actually means in the context of multiple threads.
Reviewed by: peter@freebsd.org
- If either of proc or kse are NULL during thread_exit(), then
the kernel is going to fault because parts of the function
assume they aren't NULL. Instead, just assert they aren't NULL
(as well as the kse group) and assume they are in all of the
code. It doesn't make sense for them to be NULL here anyways.
- Move the PROC_UNLOCK(p) up above clearing td_proc, etc. since
otherwise we will panic if the proc's lock is contested.
Submitted by: jhb@freebsd.org
circumstances. The problem was only reported with -stable, but it's
obviously wrong in -current also. MFC is forthcoming.
Submitted by: doconnor@dsoft.com.au
this was quite broken, it never was updated for metadata support.
The a.out kld file support was never really used, as it wasn't necessary.
You could always load elf kld's, even in an a.out kernel.
kld's anywhere, and it was always possible to load ELF kld's even in an
a.out kernel. There is no reason for this to exist anymore, and a.out
kld support has been suffering serious bitrot over the years. They have
not been fully functional for quite some time.
alive!" message right as the scsi probe messages happen. This is a bit
nasty, but it seems to work. At the point that we unlock the AP's, briefly
wait till they are all done while we hold the console on their behalf.
ECONNABORTED. Make this happen in the non-blocking case as well.
The previous behavior was to return EAGAIN, which (a) is not
consistent with the blocking case and (b) causes the application
to think the socket is still valid.
PR: bin/42100
Reviewed by: freebsd-net
MFC after: 3 days
own namespace pollution/compatibility cruft.
Removed the main part of the pollution. All clients have been converted
to either not depend on getting old locking interfaces from this new
locking header, or usual case to get it from another header (typically
vnode.h, where declaring old loccking interfaces is less bogus because
vnode.h uses them internally).
automatically once opt_foo.h is in SRCS, modulo some carelessness in
removing garbage in stale versions of opt_foo.h (touch(1) should not
be used to create opt_foo.h in kmod.mk or elsewhere).
Cleaned up nearby rule for creating opt_ddb.h.
are implemented here instead of depending on namespace pollution in
<sys/lock.h>. Fixed nearby include messes (1 disordered include and 1
unused include).
Recent version of ACPI CA returns the package object which contains
object reference elements if the elements are named objects.
We need to be careful when you use acpi_ForeachPackageObject() in new
code...
We are having panics with the driver under stress with jumbo frames.
Unfortunately we didnot catch it during our regular test cycle.
I am going to MFC the backout immediately.
log the start and end of periods during which mtx_lock() is waiting
to acquire a sleep mutex. The log message includes the file and
line of both the waiter and the holder.
Reviewed by: jhb, jake
- Add an ACPI PCI-PCI bridge driver (the previous driver just handled
Host-PCI bridges) that is a PCI driver that is a subclass of the generic
PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and
pci_route_interrupt.
- The probe routine only succeeds if our parent is an ACPI PCI bus which
we test for by seeing if we can read our ACPI_HANDLE as an ivar.
- The attach routine saves a copy of our handle and calls the new
acpi_pcib_attach_common() function described below.
- The read_ivar routine handles normal PCI-PCI bridge ivars and adds an
ivar to return the ACPI_HANDLE of the bus this bridge represents.
- The route_interrupt routine fetches the _PRT (PCI Interrupt Routing
Table) from the bridge device's softc and passes it off to
acpi_pcib_route_interrupt() to route the interrupt.
- Split the old ACPI Host-PCI bridge driver into two pieces. Part of
the attach routine and most of the route_interrupt routine remain in
acpi_pcib.c and are shared by both ACPI PCI bridge drivers.
- The attach routine verifies the PCI bridge is present, reads in
the _PRT for the bridge, and attaches the child PCI bus.
- The route_interrupt routine uses the passed in _PRT to route a PCI
interrupt.
The rest of the driver is the ACPI Host-PCI bridge specific bits that
live in acpi_pcib_acpi.c.
- We no longer duplicate pcib_maxslots but use it directly.
- The driver now uses the pcib devclass instead of its own devclass.
This means that PCI busses are now only children of pcib devices.
- Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar
of the child bus.
- Fetch the _PRT for routing PCI interrupts directly from our softc
instead of walking the devclass to find ourself and then fetch our
own softc.
With this change and the new ACPI PCI bus driver, ACPI can now properly
route interrupts for devices behind PCI-PCI bridges. That is, the
Itanium2 with like 10 PCI busses can now boot ok and route all the PCI
interrupts. Hopefully this will also fix problems people are having with
CardBus bridges behind PCI-PCI bridges not properly routing interrupts
when ACPI is used.
Tested on: i386, ia64
driver. This driver overrides the probe, attach, and read_ivar methods.
If the parent bridge is an ACPI PCI bridge, then the probe routine will
match, otherwise it will fail. It tests this by seeing if it can get
the ACPI_HANDLE ivar from the bridge device.
In the attach routine, it uses pci_add_children() to add all the child
devices (but with a slightly larger ivar so it can store ACPI_HANDLE's
for child devices) and then walks through the ACPI namespace below the
bus device to cache ACPI_HANDLE's for all child devices present in the
namespace. It does this by comparing the pci slot and function to the
address encoded in _ADR of the devices in the ACPI namespace.
The read_ivar routine passes most requests off to pci_read_ivar()
and adds a new request so that the ACPI_HANDLE for a child device can
be read.
To add proper power support the power methods can be overridden as well,
but that is not currently implemented. Also, there are cases where a
device may show in the ACPI namespace as a PCI device that the PCI probe
does not find. Currently such devices are ignored.
Tested on: i386, ia64
OOP speak, you would mark these as 'protected' members. Specifically:
- Make the pcib_softc struct public so it can be used by subclasses.
- Make pcib_{read,write}_ivar(), pcib_alloc_resource(), pcib_maxslots(),
and pcib_{read,write}_config() globals that can be used by subclasses.
- Make the pcib devclass a global variable.
- Move most of the pcib_attach() function into a global
pcib_attach_common() function that can be called by the attach routines
of subclasses.
Tested on: i386, alpha, sparc64, ia64
- Make the pci devclass a global variable.
- Add child devices in pci_attach() instead of pci_probe(). Change
pci_probe() to just check for a valid bus number from the associated
bridge and return -1000 if successful. This allows subclasses of the
PCI bus driver to override the generic driver.
- Move the code to load the vendor data into its own public function.
Really though, doing this at attach is just plain wrong. This should
really be done in the module load routine instead. As a side effect,
the 'busno' variable in pci_attach() is now no longer static (minor
bug that was harmless so far.)
- Change pci_add_children() to take an extra argument that is the size of
the device info structure passed to pci_read_device() and make it public
so subclasses of the PCI bus can call it in their attach routines.
- Move the bits to attach a probed PCI child to a PCI bus into a global
pci_add_child() function. This will allow subclasses that can detect
a PCI device not found in the normal PCI probe to add those devices in
their own attach routine. (I have seen this in the ACPI tree on my
laptop for example.) As a side effect, change the static function
pci_add_resources() to get the busno, slot, and func from the passed
in dinfo structure instead of requiring them as function arguments.
Tested on: i386, alpha, ia64, sparc64
LNK device (interrupt source provider sort of) is present before using it,
but the code actually tested the status (_STA) of the PCI bridge device
doing the routing, not the actual LNK device. Fix it to check the status
of the LNK device.
Change _BSD_CLK_TCK_ and _BSD_CLOCKS_PER_SEC_ to match stathz. This
should result in bug for bug compatibility in staticly linked
programs and dynamicly linked programs should see an immediate
correction.
firewall logging on and off when at elevated securelevel(8). It would
be nice to be able to only lock these at securelevel >= 3, like rules
are, but there is no such functionality at present. I don't see reason
to be adding features to securelevel(8) with MAC being merged into 5.0.
PR: kern/39396
Reviewed by: luigi
MFC after: 1 week
pmap_zero_page() and pmap_zero_page_area() were modified to accept
a struct vm_page * instead of a physical address, vm_page_zero_fill()
and vm_page_zero_fill_area() have served no purpose.
a pointer to a symbol is given and we have to find the containing symbol
table. We do this by bounds checking. For some strange reason (ie I
haven't found the root cause) the first test succeeded for said symbol,
implying that the symbol came from the .dynsym table. In reality however
the symbol actually resided in the .symtab table. Needless to say that
all that was returned was junk.
The upper bounds check was: (symptr - baseptr) < symtab_size
This has been rewritten to: symptr < (baseptr + symtab_size)
As a side-effect, slightly more optimal (and still correct :-) code can
be generated on ia64.
some circumstances when we get a select collision, we can end up with
cases where we do not clear some sip->si_thread on the way out, leading to
page faults in selwakeup(). This should solve the problem where postfix
can crash the kernel during select collisions.
Reviewed by: alfred
This state is to allow some experimentation and not YET used..
The theory is that a thread that is about to sleep is placed on the sleep
queue and then discovers it should suspend, and is placed on suspend queue.
(these are separate queues and it can be on both). It will not become runnable
until it has been removed from BOTH queues. i.e. a wakeup event
has occured AND the process has been unsuspended. If it were not on the sleep
queue when suspended, then the (possibly only) wakeup event might arrive and
not find any process to wake up. this would result in the thread
sleeping 'forever' when the suspension is lifted. This state will
transition to one of TDS_SLP or TDS_SUSPENDED, depending upon which
constraint is lifted first.
o Move mode_t details from <sys/types.h> into <sys/_types.h>.
o Add primitives for sharing the mode_t and off_t typedefs.
o Add typedefs mode_t, off_t, and size_t to <sys/mman.h>.
PR: 21644
These types are unlikely to ever become very MD. They include:
clockid_t, ct_rune_t, fflags_t, intrmask_t, mbstate_t, off_t, pid_t,
rune_t, socklen_t, timer_t, wchar_t, and wint_t.
While moving them, make a few adjustments (submitted by bde):
o __ct_rune_t needs to be precisely `int', not necessarily __int32_t,
since the arg type of the ctype functions is int.
o __rune_t, __wchar_t and __wint_t inherit this via a typedef of
__ct_rune_t.
o Some minor wording changes in the comment blocks for ct_rune_t and
mbstate_t.
Submitted by: bde (partially)
Attempt to determine what function of AUX_OUT is: "True line level
out", "Headphone out", or "4-Channel out" and frig OSS mixer label
accordingly.
Addresses problem raised by Randy Bush on -multimedia of not being
able to hear audio on ich2 m/b which was eventually found to be
because the mixer monitor value was 0. On this h/w the label
"monitor" should now be presented as the marginally more intuitive
"ogain".
instead of including the userland string.h header.
Prompted by: breakage with old string.h from recent machine/types.h fix
Approved by: peter (in principle)
failed to set signal flags proprly for ast()
failed to set signal flags proprly for ast()
failed to set signal flags proprly for ast()
failed to set signal flags proprly for ast()
LK_INTERLOCK. The interlock will never be held on return from these
functions even when there is an error. Errors typically only occur when
the XLOCK is held which means this isn't the vnode we want anyway. Almost
all users of these interfaces expected this behavior even though it was
not provided before.
with interlock held in error conditions when the caller did not specify
LK_INTERLOCK.
- Add several comments to vn_lock() describing the rational behind the code
flow since it was not immediately obvious.
with interlock held in error conditions when the caller did not specify
LK_INTERLOCK.
- Add several comments to vn_lock() describing the rational behind the code
flow since it was not immediately obvious.
We need to rethink a bit of this and it doesn't matter if
we break the KSE test program for now as long
as non-KSE programs act as expected.
Submitted by: David Xu <bsddiy@yahoo.com>
(this guy's just asking to get hit with a commit bit..)
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
This is required by recent changes to <sys/pcpu.h>, which uses
the #error preprocessor directive to keep non-kernel
applications from using it.
_KERNEL is defined below the #include <stand.h>, because <stand.h>
removes the definition of _KERNEL.
- Move the inclusion of <sys/queue.h> above the inclusion of
<sys/linker.h> to avoid syntax errors.
in6_v4mapsin6_sockaddr() which allocate the appropriate sockaddr_in*
structure and initialize it with the address and port information passed
as arguments. Use calls to these new functions to replace code that is
replicated multiple times in in_setsockaddr(), in_setpeeraddr(),
in6_setsockaddr(), in6_setpeeraddr(), in6_mapped_sockaddr(), and
in6_mapped_peeraddr(). Inline COMMON_END in tcp_usr_accept() so that
we can call in_sockaddr() with temporary copies of the address and port
after the PCB is unlocked.
Fix the lock violation in tcp6_usr_accept() (caused by calling MALLOC()
inside in6_mapped_peeraddr() while the PCB is locked) by changing
the implementation of tcp6_usr_accept() to match tcp_usr_accept().
Reviewed by: suz
released. vcanrecycle() failed to unlock interlock under this condition.
- Remove an extra VOP_UNLOCK from a failure case in vcanrecycle().
Pointed out by: rwatson
- Use the new VI asserts in place of the old mtx_assert checks.
- Add the VI asserts to the automated lock checking in the VOP calls. The
interlock should not be held across vops with a few exceptions.
- Add the vop_(un)lock_{pre,post} functions to assert that interlock is held
when LK_INTERLOCK is set.
We now also read configuration information for the SCSI cards- this allows
us to try and say what the speed settings now are.
Start, but not yet complete, the process of reorgs && #defines so that we
can backport to RELENG_4 pretty soon.
