in up to 16 (KI_NGROUPS) values and steal a bit from ki_cr_flags
(all bits currently unused) to indicate overflow with the new flag
KI_CRF_GRP_OVERFLOW.
This fixes procstat -s.
Approved by: re (kib)
a device pager (OBJT_DEVICE) object in that it uses fictitious pages to
provide aliases to other memory addresses. The primary difference is that
it uses an sglist(9) to determine the physical addresses for a given offset
into the object instead of invoking the d_mmap() method in a device driver.
Reviewed by: alc
Approved by: re (kensmith)
MFC after: 2 weeks
network stacks, VNET_SYSINIT:
- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
occur each time a network stack is instantiated and destroyed. In the
!VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
For the VIMAGE case, we instead use SYSINIT's to track their order and
properties on registration, using them for each vnet when created/
destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
previously, as well as its dependency scheme: we now just use the
SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
they want init functions to be called for each virtual network stack
rather than just once at boot, compiling down to DOMAIN_SET() in the
non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
of modinfo or DOMAIN_SET() for init/uninit events. In some cases,
convert modular components from using modevent to using sysinit (where
appropriate). In some cases, do minor rejuggling of SYSINIT ordering
to make room for or better manage events.
Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup)
Discussed with: jhb, bz, julian, zec
Reviewed by: bz
Approved by: re (VIMAGE blanket)
non-vrtiualized sysctls so we cannot used one common function.
Add a macro to convert the arg1 in the virtualized case to
vnet.h to not expose the maths to all over the code.
Add a wrapper for the single virtualized call, properly handling
arg1 and call the default implementation from there.
Convert the two over places to use the new macro.
Reviewed by: rwatson
Approved by: re (kib)
portion of the page that was written. Among other problems, this
page might be picked up by pagedaemon, with failed assertion in
vm_pageout_flush() about validity of the page.
Reported and tested by: pho
Approved by: re (kensmith)
MFC after: 3 weeks
unused custom mutex/condvar-based sleep locks with two locks: an
rwlock (for non-sleeping use) and sxlock (for sleeping use). Either
acquired for read is sufficient to stabilize the vnet list, but both
must be acquired for write to modify the list.
Replace previous no-op read locking macros, used in various places
in the stack, with actual locking to prevent race conditions. Callers
must declare when they may perform unbounded sleeps or not when
selecting how to lock.
Refactor vnet sysinits so that the vnet list and locks are initialized
before kernel modules are linked, as the kernel linker will use them
for modules loaded by the boot loader.
Update various consumers of these KPIs based on whether they may sleep
or not.
Reviewed by: bz
Approved by: re (kib)
modules was present, which turns out to be false in some situations.
Back out the assertion.
Reported by: Luiz Otavio O Souza <lists.br at gmail.com>,
Florian Smeets <flo at kasimir.com>
Approved by: re (kensmith) (implicit)
PCATCH, to indicate that thread shall not be stopped upon receipt of
SIGSTOP until it reaches the kernel->usermode boundary.
Also change thread_single(SINGLE_NO_EXIT) to only stop threads at
the user boundary unconditionally.
Tested by: pho
Reviewed by: jhb
Approved by: re (kensmith)
process that still need to be suspended or exited from thread_single
into the new function calc_remaining().
Tested by: pho
Reviewed by: jhb
Approved by: re (kensmith)
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
dependent memory attributes:
Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the
fact that there are machine-dependent memory attributes that have
nothing to do with controlling the cache's behavior.
Introduce vm_object_set_memattr() for setting the default memory
attributes that will be given to an object's pages.
Introduce and use pmap_page_{get,set}_memattr() for getting and
setting a page's machine-dependent memory attributes. Add full
support for these functions on amd64 and i386 and stubs for them on
the other architectures. The function pmap_page_set_memattr() is also
responsible for any other machine-dependent aspects of changing a
page's memory attributes, such as flushing the cache or updating the
direct map. The uses include kmem_alloc_contig(), vm_page_alloc(),
and the device pager:
kmem_alloc_contig() can now be used to allocate kernel memory with
non-default memory attributes on amd64 and i386.
vm_page_alloc() and the device pager will set the memory attributes
for the real or fictitious page according to the object's default
memory attributes.
Update the various pmap functions on amd64 and i386 that map pages to
incorporate each page's memory attributes in the mapping.
Notes: (1) Inherent to this design are safety features that prevent
the specification of inconsistent memory attributes by different
mappings on amd64 and i386. In addition, the device pager provides a
warning when a device driver creates a fictitious page with memory
attributes that are inconsistent with the real page that the
fictitious page is an alias for. (2) Storing the machine-dependent
memory attributes for amd64 and i386 as a dedicated "int" in "struct
md_page" represents a compromise between space efficiency and the ease
of MFCing these changes to RELENG_7.
In collaboration with: jhb
Approved by: re (kib)
correctly checks for reclaimed vnode, possibly calling VOP_REVOKE for
such vnode. If the terminal is already revoked, or devfs mount was
forcibly unmounted, the revocation of doomed ctty vnode causes panic.
Reported and tested by: lstewart
Approved by: re (kensmith)
MFC after: 2 weeks
if the new file mode is the same as it was before; however, this
optimization must be disabled for filesystems that support NFSv4 ACLs.
Chmod uses pathconf(2) to determine whether this is the case - however,
pathconf(2) always follows symbolic links, while the 'chmod -h' doesn't.
This change adds lpathconf(3) to make it possible to solve that problem
in a clean way.
Reviewed by: rwatson (earlier version)
Approved by: re (kib)
As pointed out, POLLHUP should be generated, even if it hasn't been
specified on input. It is also not allowed to return both POLLOUT and
POLLHUP at the same time.
Reported by: jilles
Approved by: re (kib)
under VM environments, it's too slow for FreeBSD to work
properly. For example, ping at 10hz pings about every 600ms
instead of about every second.
Approved by: re (kib)
when all writers, observed by reader, exited. Use writer generation
counter for fifo, and store the snapshot of the fifo generation in the
f_seqcount field of struct file, that is otherwise unused for fifos.
Set FreeBSD-undocumented POLLINIGNEOF flag only when file f_seqcount is
equal to fifo' fi_wgen, and revert r89376.
Fix POLLINIGNEOF for sockets and pipes, and return POLLHUP for them.
Note that the patch does not fix not returning POLLHUP for fifos.
PR: kern/94772
Submitted by: bde (original version)
Reviewed by: rwatson, jilles
Approved by: re (kensmith)
MFC after: 6 weeks (might be)
around the sequence that drop vnode lock and then busies the mount point.
Not having vlocked node or direct reference to the mp allows for the
forced unmount to proceed, making mp unmounted or reused.
Tested by: pho
Reviewed by: jeff
Approved by: re (kensmith)
MFC after: 2 weeks
system calls:
- Centralize generation of argument tokens for VM addresses in a macro,
ADDR_TOKEN(), and properly encode 64-bit addresses in 64-bit arguments.
- Fix up argument numbers across a large number of syscalls so that they
match the numeric argument into the system call.
- Don't audit the address argument to ioctl(2) or ptrace(2), but do keep
generating tokens for mmap(2), minherit(2), since they relate to passing
object access across execve(2).
Approved by: re (audit argument blanket)
Obtained from: TrustedBSD Project
MFC after: 1 week
using the size of the descriptor array.
- A lock is not needed to fetch fd_lastfile. The results are stale the
instant it is dropped.
- Use a private mutex pool for select since the pool mutex is not used
as a leaf.
- Fetch the si_mtx pointer first before resorting to hashing to compute
the mutex address.
Reviewed by: McKusick
Approved by: re (kib)
- For x86, change the interrupt source method to assign an interrupt source
to a specific CPU to return an error value instead of void, thus allowing
it to fail.
- If moving an interrupt to a CPU fails due to a lack of IDT vectors in the
destination CPU, fail the request with ENOSPC rather than panicing.
- For MSI interrupts on x86 (but not MSI-X), only allow cpuset to be used
on the first interrupt in a group. Moving the first interrupt in a group
moves the entire group.
- Use the icu_lock to protect intr_next_cpu() on x86 instead of the
intr_table_lock to fix a LOR introduced in the last set of MSI changes.
- Add a new privilege PRIV_SCHED_CPUSET_INTR for using cpuset with
interrupts. Previously, binding an interrupt to a CPU only performed a
privilege check if the interrupt had an interrupt thread. Interrupts
without a thread could be bound by non-root users as a result.
- If an interrupt event's assign_cpu method fails, then restore the original
cpuset mask for the associated interrupt thread.
Approved by: re (kib)
rather than as paths, which would lead to them being treated as relative
pathnames and hence confusingly converted into absolute pathnames.
Capture flags to unmount(2) via an argument token.
Approved by: re (audit argument blanket)
MFC after: 3 days
easily determine how much space is left in the send queue; they do not
need to know the send queue size.
NetBSD revisions:
sys_socket.c r1.41, 1.42
filio.h r1.9
Obtained from: NetBSD
Approved by: re (kensmith)
loading hwpmc, but calculate at runtime and allocate the necessary space.
Also the current logic is wrong as it can lead to an endless loop.
Sponsored by: Sandvine Incorporated
Reported by: Ryan Stone <rstone at sandvine dot com>
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
Approved by: re (kib)
Introduce the new flag KNF_NOKQLOCK to allow event callers to be called
without KQ_LOCK mtx held.
- Modify VFS knote calls to always use KNF_NOKQLOCK flag. This is required
for ZFS as its getattr implementation may sleep.
Approved by: re (rwatson)
Reviewed by: kib
MFC after: 2 weeks
inbound data waiting on a filedescriptor, such as a pipe or a socket,
for instance by using select(2), poll(2), kqueue(2), ioctl(FIONREAD)
etc.
But we have no way of finding out if written data have yet to be
disposed of, for instance, transmitted (and ack'ed!) to some remote
host, or read by the applicantion at the far end of the pipe.
The closest we get, is calling shutdown(2) on a TCP socket in
non-blocking mode, but this has the undesirable sideeffect of
preventing future communication.
Add a complement to FIONREAD, called FIONWRITE, which returns the
number of bytes not yet properly disposed of. Implement it for
all sockets.
Background:
A HTTP server will want to time out connections, if no new request
arrives within a certain period after the last transmitted response
has actually been sent (and ack'ed).
For a busy HTTP server, this timeout can be subsecond duration.
In order to signal to a load-balancer that the connection is truly
dead, TCP_RST will be the preferred method, as this avoids the need
for a RTT delay for FIN handshaking, with a client which, surprisingly
often, no longer at the remote IP number.
If a slow, distant client is being served a response which is big
enough to fill the window, but small enough to fit in the socket
buffer, the write(2) call will return immediately.
If the session timeout is armed at that time, all bytes in the
response may not have been transmitted by the time it fires.
FIONWRITE allows the timeout to check that no data is outstanding
on the connection, before it TCP_RST's it.
Input & Idea from: rwatson
Approved by: re (kib)
in the case of a file system with a block size that is less than the page
size, cluster_rbuild() looks at too many of the page's valid bits.
Consequently, it may terminate prematurely, resulting in poor performance.
Reported by: bde
Reviewed by: tegge
Approved by: re (kib)
specific macros for each audit argument type. This makes it easier to
follow call-graphs, especially for automated analysis tools (such as
fxr).
In MFC, we should leave the existing AUDIT_ARG() macros as they may be
used by third-party kernel modules.
Suggested by: brooks
Approved by: re (kib)
Obtained from: TrustedBSD Project
MFC after: 1 week
required by video card drivers. Specifically, this change introduces
vm_cache_mode_t with an appropriate VM_CACHE_DEFAULT definition on all
architectures. In addition, this changes adds a vm_cache_mode_t parameter
to kmem_alloc_contig() and vm_phys_alloc_contig(). These will be the
interfaces for allocating mapped kernel memory and physical memory,
respectively, with non-default cache modes.
In collaboration with: jhb
Specifically, if a non-root user attempts to bind an interrupt the request
will now report failure with EPERM rather than silently failing with a
successful return code.
MFC after: 1 week
