Extend the so far IPv4-only support for multiple routing tables (FIBs)
introduced in r178888 to IPv6 providing feature parity.
This includes an extended rtalloc(9) KPI for IPv6, the necessary
adjustments to the network stack, and user land support as in netstat.
Sponsored by: Cisco Systems, Inc.
Reviewed by: melifaro (basically)
MFC after: 10 days
referenced within its timeout window. This change clears the LLE_VALID flag when an llentry
is removed from an interface's hash table and adds an extra check to the flowtable code
for the LLE_VALID flag in llentry to avoid retaining and using a stale reference.
Reviewed by: qingli@
MFC after: 2 weeks
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
This was lost when it was converted to using a condition variable instead
of lbolt.
- Drop the priority of flowtable down to PPAUSE when it is idle as well
since it is a similar background task.
MFC after: 2 weeks
variable into two so that we can see on which one we are waiting.
This might also more properly propagate the update of the
flowclean_cycles flag and avoid "hangs" people were seeing.
Suggested by: rwatson [1]
Sponsored by: ISPsystem [1]
Reviewed by: julian [1]
Updated by: Mikolaj Golub (to.my.trociny gmail.com)
Tested by: Mikolaj Golub (to.my.trociny gmail.com)
MFC After: 1 week
[1] Early 2010, initial version.
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.
Changes reverted:
------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines
Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.
------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines
Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines
Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
- increase flow cleaning frequency and decrease flow caching time
when near the flow limit
- stop allocating new flows when within 3% of maxflows don't start
allocating again until below 12.5%
MFC after: 7 days
address as well as the transport protocol port information
from the outbound packets. The routing code is generic and
compares every byte in the given sockaddr object. Therefore
the temporary sockaddr objects must be cleared due to padding
bytes. In addition, the port information must be stripped
or the route search will either fail or return the incorrect
route entry.
Unit testing is done using OpenVPN over the if_tun interface.
MFC after: 7 days
- add a name argument to flowtable_alloc for printing with ddb commands
- extend ddb commands to print destination address or 4-tuples
- don't parse ports in ulp header if FL_HASH_ALL is not passed
- add kern_flowtable_insert to enable more generic use of flowtable
(e.g. system calls for adding entries)
- don't hash loopback addresses
- cleanup whitespace
- keep statistics per-cpu for per-cpu flowtables to avoid cache line contention
- add sysctls to accumulate stats and report aggregate
MFC after: 7 days
allow for connection load balancing across interfaces. Currently
the address alias handling method is colliding with the ECMP code.
For example, when two interfaces are configured on the same prefix,
only one prefix route is installed. So connection load balancing
among the available interfaces is not possible.
The other advantage of ECMP is for failover. The issue with the
current code, is that the interface link-state is not reflected
in the route entry. For example, if there are two interfaces on
the same prefix, the cable on one interface is unplugged, new and
existing connections should switch over to the other interface.
This is not done today and packets go into a black hole.
Also, there is a small bug in the kernel where deleting ECMP routes
in the userland will always return an error even though the command
is successfully executed.
MFC after: 5 days
during system initialization time. Since the flow-table is
designed to maintain per CPU flow cache, the existing code
did not check whether "smp_started" is true before calling
sched_bind() and sched_unbind(), which triggers a page fault.
Reviewed by: jeff
MFC after: immediately
specific routes. When the routing table changes, for example,
when a new route with a more specific prefix is inserted into the
routing table, the flow-table is not updated to reflect that change.
As such existing connections cannot take advantage of the new path.
In some cases the path is broken. This patch will update the affected
flow-table entries when a more specific route is added. The route
entry is properly marked when a route is deleted from the table.
In this case, when the flow-table performs a search, the stale
entry is updated automatically. Therefore this patch is not
necessary for route deletion.
Submitted by: simon, phk
Reviewed by: bz, kmacy
MFC after: 3 days
information for interface of IFF_POINTOPOINT or IFF_LOOPBACK type.
Since the L2 information (rt_lle) is invalid for these interface
types, accidental caching attempt will trigger panic when the invalid
rt_lle reference is accessed.
When installing a new route, or when updating an existing route, the
user supplied gateway address may be an interface address (this is
particularly true for point-to-point interface related modules such
as ppp, if_tun, if_gif). Currently the routing command handler always
set the RTF_GATEWAY flag if the gateway address is given as part of the
command paramters. Therefore the gateway address must be verified against
interface addresses or else the route would be treated as an indirect
route, thus making that route unusable.
Reviewed by: kmacy, julia, rwatson
Verified by: marcus
MFC after: 3 days
Specifically, not until the per-vnet parts have been set up.
Submitted by: kmacy@
Reviewed by: julian@, zec@
Approved by: re(rwatson)
MFC after: immediately
moving a frequently executed flowtable syslog statement from being
conditional on bootverbose to conditional on a per-vnet flowtable
sysctl.
Approved by: re@
the mbuf for obtaining the fib index
- check that a cached flow corresponds to the same fib index as the
packet for which we are doing the lookup
- at interface detach time flush any flows referencing stale rtentrys
associated with the interface that is going away (fixes reported
panics)
- reduce the time between cleans in case the cleaner is running at
the time the eventhandler is called and the wakeup is missed less
time will elapse before the eventhandler returns
- separate per-vnet initialization from global initialization
(pointed out by jeli@)
Reviewed by: sam@
Approved by: re@
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
network stacks, VNET_SYSINIT:
- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
occur each time a network stack is instantiated and destroyed. In the
!VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
For the VIMAGE case, we instead use SYSINIT's to track their order and
properties on registration, using them for each vnet when created/
destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
previously, as well as its dependency scheme: we now just use the
SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
they want init functions to be called for each virtual network stack
rather than just once at boot, compiling down to DOMAIN_SET() in the
non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
of modinfo or DOMAIN_SET() for init/uninit events. In some cases,
convert modular components from using modevent to using sysinit (where
appropriate). In some cases, do minor rejuggling of SYSINIT ordering
to make room for or better manage events.
Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup)
Discussed with: jhb, bz, julian, zec
Reviewed by: bz
Approved by: re (VIMAGE blanket)
nor destructors, as there's no actual work to do.
In most cases, the constructors weren't needed because of the existing
protocol initialization functions run by net_init_domain() as part of
VNET_MOD_NET, or they were eliminated when support for static
initialization of virtualized globals was added.
Garbage collect dependency references to modules without constructors or
destructors, notably VNET_MOD_INET and VNET_MOD_INET6.
Reviewed by: bz
Approved by: re (vimage blanket)
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
This change should make options VIMAGE kernel builds usable again,
to some extent at least.
Note that the size of struct vnet_inet has changed, though in
accordance with one-bump-per-day policy we didn't update the
__FreeBSD_version number, given that it has already been touched
by r194640 a few hours ago.
Reviewed by: bz
Approved by: julian (mentor)
- fix bug where tail pointer of the free list would not get advanced
- clear entry's next pointer when it is added to the freelist to avoid freeing
an entry that it still points to
as well as providing stateful load balancing when used with RADIX_MPATH.
- Currently compiled in to i386 and amd64 but disabled by default, it can be enabled at
runtime with 'sysctl net.inet.flowtable.enable=1'.
- Embedded users can remove it entirely from the kernel by adding 'nooption FLOWTABLE' to
their kernel config files.
- A minimal hookup will be added to ip_output in a subsequent commit. I would like to see
more review before bringing in changes that require more churn.
Supported by: Bitgravity Inc.
