Commit Graph

22 Commits

Author SHA1 Message Date
Vinod Kashyap
75e4d88db4 Fix for a problem seen only on 6xxx series controllers, where-in the
driver tries to submit the same request repeatedly, on finding the
controller cmd queue to be full.

Submitted by:ps, vkashyap
Reviewed by:re
Approved by:re
2004-06-11 18:42:44 +00:00
Vinod Kashyap
088113ed0b 1. Fixed potential problem that would cause out-of-order requests in twe_startio.
2. Changed version.

Submitted by: scottl
Reviewed by: vkashyap
Approved by: re
2004-05-12 04:10:37 +00:00
Vinod Kashyap
c2d083bbba 1. Better handle a return value of EINPROGRESS from bus_dmamap_load.
2. Check for bad return value from twe_map_request in places where there
   was no checking.

Reviewed by: ps
2004-03-25 19:30:35 +00:00
Colin Percival
27021df2ff Fix off-by-one error: sc->twe_drive is an array of TWE_MAX_UNITS elements.
Reported by:	"Ted Unangst" <tedu@coverity.com>
Approved by:	rwatson (mentor)
2004-02-22 01:03:38 +00:00
Paul Saab
a85e26c4bf After extensive QA cycles at 3ware, bring the driver in-line with all the
issues which they found and asked to be changed so 3ware can offcially
support the driver.

Summary of the most significant changes:

- TWE_OVERRIDE is no longer supported
- If twe_getparam failed, bogus data would be returned to the caller
- Cache the device unit in the twe_drive structure to aid debugging
- Add the 3ware driver version.
- Proper return error codes for many functions.
- Track the minimum queue length statistics
- 4.x compat: use the cached unit number from the twe_drive structure
  instead of the the cached si_drv2.  3ware found that after many loads
  and unloads that si_drv2 became corrupted.  This did not happen in
  -current.

Submitted by:	Vinod Kashyap (with modifications by me)
Approved by:	re (rwatson)
2003-12-02 07:57:20 +00:00
Paul Saab
ad8fc00c75 Don't tsleep on NULL 2003-08-19 12:22:17 +00:00
Paul Saab
f487e0e2df Fix the busdma support in twe to support EINPROGRESS and enable it for
use with PAE kernels.
2003-08-12 06:38:55 +00:00
Paul Saab
235a79707a Properly support the 3ware generic API.
- Build SGL's for ATA_PASSTHROUGH commands
- Fallback to using the sgl_offset when the opcode is unknown for building
  SGL's/
- Add ioctl calls for adding and removing units.
- Define previously undefined AEN's
- Allocate memory for the ioctl payload in multiples of 512bytes.

MFC after:      1 week
2003-08-05 19:55:21 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Archie Cobbs
4a6a94d8d8 Replace (ab)uses of "NULL" where "0" is really meant. 2002-08-22 21:24:01 +00:00
Mike Smith
3f1166f04c Update for the 6.9 firmware family (6xxx controllers), as well as for
the upcoming 7.4 family (7xxx controllers).

 - improved error reporting and handling
 - more diagnostic output
 - add extra command packet definitions
 - merge sources again with -stable
2002-03-07 09:55:41 +00:00
Peter Wemm
d62e201b7b Fix some unused warnings. One function is only used if
TWE_SHUTDOWN_NOTIFICATION is defined, the other two are never used.
2002-02-27 23:59:35 +00:00
Mike Smith
282070b3e8 Minor updates:
- Rework of twe_report_request to use the command status value rather
   than the flags register. (Joel Jacobson @ 3ware)
 - Update to match some changes in -current vs. stable.

MFC in: 1 week
2001-05-07 21:46:44 +00:00
Mike Smith
358cd20f3a Typo fix; use & to test for bits set in the status register.
Submitted by:	Joel Jacobson <jake@3ware.com>
2001-02-26 20:13:19 +00:00
John Baldwin
6db2e28142 Remove a prototype for an unused and undefined debugging function. 2001-01-23 22:21:14 +00:00
Mike Smith
b09d2ca319 - add support for crashdumps (courtesy of ps and Y!)
- standardise error reporting for commands
 - simplify the driver-to-controller bio transfer
 - add bio in/out accounting
 - correctly preserve the command ID in twe_ioctl (thanks to joel@3ware)
2000-12-03 02:11:35 +00:00
Mike Smith
76ba114c80 If we can't get a command to back the bio we just took off the queue,
put the bio back, otherwise we'll drop it when we bail.  This was
causing bio lossage under load, leading to eventual system lockup.
2000-11-03 16:11:05 +00:00
Mike Smith
d1702591ac Add a missing newline to a diagnostic. 2000-10-27 05:58:16 +00:00
Mike Smith
e6c12d85d0 Major update to the 'twe' driver.
- Layout reorganisation to enhance portability.  The driver now has
   a relatively MI 'core' and a FreeBSD-specific layer over the top.
   Since the NetBSD people have already done their own port, this is
   largely just to help me with the BSD/OS port.

 - Request ID allocation changed to improve performance (I'd been
   considering switching to this approach after having failed to come
   up with a better way to dynamically allocate request IDs, and seeing
   Andy Doran use it in the NetBSD port of the driver convinced me
   that I was wasting my time doing it any other way).  Now we just
   allocate all the requests up front.

 - Maximum request count bumped back to 255 after characterisation
   of a firmware issue (off-by-one causing it to crash with 256
   outstanding commands).

 - Control interface implemented.  This allows 3ware's '3dm' utility to
   talk to the controller.  3dm will be available from 3ware shortly.

 - Controller soft-reset feature added; if the controller signals a
   firmware or protocol error, the controller will be reset and all
   outstanding commands will be retried.
2000-10-25 06:59:06 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Mike Smith
2597312222 Initial import of a driver for the 3ware Escalade family of ATA RAID
controllers.
2000-05-24 23:35:23 +00:00