libgeom do so successfully
Tested by running `geom part list` produced from a -DWITHOUT_DYNAMICROOT built
world
PR: 198078
Reported by: Eir Nym <eirnym@gmail.com>
currently a spin lock. Apparently, the only reason for this is that
umtx_thread_exit() is called under the process spinlock, which put the
requirement on the umtx_lock. Note that the witness static order list
is wrong for the umtx_lock, umtx_lock is explicitely before any thread
lock, so it is also before sleepq locks.
Change umtx_lock to be the sleepable mutex. For the reason above, the
calls to umtx_thread_exit() are moved from thread_exit() earlier in
each caller, when the process spin lock is not yet taken.
Discussed with: jhb
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
from the git tree. This merges a lot that we're not using, but there's
too many files to be selective and have a hope of catching everything.
If there are conflicts with the rest of the tree, we'll resolve them
on a case by case basis.
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
This will override the resource allocation of simplebus, and also
merge the resource allocation code which was in xlp_pci.c.
With this change the SoC devices that does not have proper PCI
resources will be on the FDT simplebus. We can remove
sys/mips/nlm/dev/cfi_pci_xlp.c and sys/mips/nlm/dev/uart_pci_xlp.c
tracking.
It is important to subtract the residual from the requested
transfer size to see how much data was actually transferred. With
tape drives in particular, it is common to request more data than is
returned.
Also, add I/O latency tracking for CAM requests issued by
cam_periph_runccb().
If the caller supplies a struct devstat, and the I/O is a SCSI or
ATA I/O, we will track the elapsed time to provide I/O latency
statistics for the request.
sys/cam/scsi/cam_periph.c:
In cam_periph_runccb(), subtract the residual when reporting I/O
totals to devstat(9) for SCSI and ATA passthrough requests.
In cam_periph_runccb(), grab the I/O start time and supply
the start time to devstat_end_transaction() so that it can
calculate the elapsed I/O time.
Sponsored by: Spectra Logic
MFC after: 1 week
consistently. This also matches the per-cpu pointer declaration
anyway.
This changes the tweak we give to the load from -32..31 to be 0..31
which seems more inline with the rest of the code (- rnd and the -=
64). It should also provide the randomness we need, and may fix a
signedness bug in the old code (it isn't clear that the effect was
intentional as opposed to sloppy, and the right shift of a signed
value is undefined to boot).
This stores sched_balance() behavior when it used random().
Differential Revision: https://reviews.freebsd.org/D1981
Provide sys/dev/fdt/simplebus.h with the class declaration so that it
is possible to subclass FDT simplebus.
Differential Revision: https://reviews.freebsd.org/D1886
Reviewed by: nwhitehorn, imp
without any translation. If the file is a symbolic link, $ORIGIN may not be
expanded to the actual origin. Use realpath(3) to properly expand $ORIGIN
to its absolute path.
Reviewed by: kib
MFC after: 1 week
prevent errors from yanking devices out from under filesystems. Only
care about special vnodes on devfs, special nodes on other kinds of
filesystems do not have special properties.
Sponsored by: EMC / Isilon Storage Division
Submitted by: Conrad Meyer
MFC after: 1 week
jail's creation parameters. This allows the kernel version to be reliably
spoofed within the jail whether examined directly with sysctl or
indirectly with the uname -r and -K options.
The values can only be set at jail creation time, to eliminate the need
for any locking when accessing the values via sysctl.
The overridden values are inherited by nested jails (unless the config for
the nested jails also overrides the values).
There is no sanity or range checking, other than disallowing an empty
release string or a zero release date, by design. The system
administrator is trusted to set sane values. Setting values that are
newer than the actual running kernel will likely cause compatibility
problems.
Differential Revision: https://reviews.freebsd.org/D1948
Relnotes: yes
Summary:
For new eMMC chips, we must signal controller HC capability in OP_COND command.
Reviewers: imp, ian
Reviewed By: ian
Differential Revision: https://reviews.freebsd.org/D1920
the cache line flush in the LAPIC page, keep direct map page covering
LAPIC mapped uncached.
To have the (incomplete) check for the LAPIC range in
pmap_invalidate_cache_range() working, lapic_paddr must be initialized
in x2APIC mode too.
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
With the patch applied the number of instruction events is 1% less and
number of mispredicted branch events is 5% less under multistream TCP
traffic load close to line rate.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
configured as 11b.
This came up when debugging other issues surrounding scanning and
channel modes.
What's going on:
* The VAP comes up as an 11b VAP, but on an 11n capable NIC;
* .. it announces HTINFO and MCS rates;
* The AP thinks it's an 11n capable device and transmits 11n frames
to the STA;
* But the STA is in 11b mode, and thus doesn't receive/ACK the frames.
It didn't happen for the ath(4) devices as the AR5416/AR9300 HALs
unconditionally enable MCS frame reception, even if the channel
mode is not 11n. But the Intel NICs are configured in 11b/11a/11g
modes when doing those, even if 11n is enabled and available.
So, don't announce 11n capabilities if the VAP isn't on an 11n
channel when sending management assocation request / reassociation
request frames.
TODO:
* Lots more testing - 11n should be "upgraded" after association,
and I just want to make sure I haven't broken 11n upgrade.
I shouldn't have - this is only happening for /sending/ association
requests, which APs aren't doing.
Tested:
* ath(4) APs (AR9331, AR7161+AR9280, AR934x)
* AR5416, STA mode
* Intel 5100, STA mode
PR: kern/196290
we need randomness in ULE. This removes random() call from the
rebalance interval code.
Submitted by: Harrison Grundy
Differential Revision: https://reviews.freebsd.org/D1968
milliseconds per transaction (DSM_MS_PER_TRANSACTION) calculation.
The comment was accurate many years ago when the kernel didn't
record I/O times on a per-I/O basis, but now that we do collect
that information in most areas, it isn't correct.
The milliseconds per transaction values are correct, assuming the
I/O duration has been recorded.
Sponsored by: Spectra Logic
MFC after: 3 days
On FreeBSD socklen_t is unsigned so the check negative len
in inet6_opt_append() is redundant and likely to be optimized
away by the compiler.
On other operating systems this is not necessarily so, and
in the future we may want to sign it so leave the check in
but place it in a secondary position as a subtle indication
that the bogus check is intentional.
Discussed with: rpaulo
CID: 1017783
Handling some interrupts in XLP (like PCIe and SATA) involves writing to
vendor specific registers as part of interrupt acknowledgement.
This was earlier done with xlp_establish_intr(), but a better solution
is to provide a function xlp_set_bus_ack() that can be used with
cpu_establish_hardintr(). This will allow platform initialization code to
setup these ACKs without changing the standrard drivers.
CDAI_FLAG_NONE advanced information CCB flag.
Support for the flag was merged to stable/10 in r279329, and the
__FreeBSD_version in stable/10 was bumped to 1001510.
Check for that version in the mps(4) and mpr(4) drivers when determining
whether to use the flag.
Sponsored by: Spectra Logic
MFC after: 3 days
r278854 introduced a race in the event channel handling code. We must make
sure that the pending bit is cleared before executing the filter, or else we
might miss other events that would be injected after the filter has ran but
before the pending bit is cleared.
While there also mask event channels while FreeBSD executes the ithread
bound to that event channel. This refrains Xen from injecting more
interrupts while the ithread has not finished it's work.
Sponsored by: Citrix Systems R&D
Reported by: sbruno, robak
Tested by: robak
block of free space after existing partition, take into account
provider's stripeoffset, since the result will be adjusted to this
value.
PR: 197989
MFC after: 1 week
level-triggered interrupt does not broadcast the EOI message to all
APICs in the system. Instead, interrupt handler must follow LAPIC EOI
with IOAPIC EOI. For modern IOAPICs, the later is done by writing to
EOIR register. Otherwise, Intel provided Linux with a trick of
temporary switching the pin config to edge and then back to level.
Detect presence of EOIR register by reading IO-APIC version. The
summary table in the comments was taken from the Linux kernel. For
Intel, newer IO-APICs are only briefly documented as part of the
ICH/PCH datasheet. According to the BKDG and chipset documentation,
AMD LAPICs do not provide EOI suppression, althought IO-APICs do
declare version 0x21 and implement EOIR.
The trick to temporary switch pin to edge mode to clear IRR was tested
on modern chipset, by pretending that EOIR is not present, i.e. by
forcing io_haseoi to zero.
Tunable hw.lapic_eoi_suppression disables the optimization.
Reviewed by: neel
Tested by: pho
Review: https://reviews.freebsd.org/D1943
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
