Update the to log fetch operation for latest WDC NVMe products.
Tested on HGST SN100 (a few years old) and WDC SN720 (more recent).
Submitted by: Akhilesh Rn <Akhilesh.RN@wdc.com> (minor style tweak by me)
Github PR: 435
Add an "nextnoskip" sysctl that allows for listing of sysctls intended to be
normally skipped for cost reasons.
This makes it so the names/descriptions of those sysctls can be discovered with
sysctl -aN/sysctl -ad/sysctl -at.
It also makes it so children are visited when a node flagged with CTLFLAG_SKIP
is explicitly requested.
The intended use case is to mark the root "kstat" node with CTLFLAG_SKIP so that
the extensive and expensive stats are skipped by default but may still be easily
obtained without having to know them all (which may not even be possible) and
request each one-by-one.
Reviewed by: jhb
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26560
/dev/pf is usable in vnet jails, so don't hide the node there.
We shouldn't expose /dev/pf in regular jails, as that gives them control over
the host (or parent vnet jail) firewall.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D26537
Repeating the default WARNS here makes it slightly more difficult to
experiment with default WARNS changes, e.g. if we did something absolutely
bananas and introduced a WARNS=7 and wanted to try lifting the default to
that.
Drop most of them; there is one in the blake2 kernel module, but I suspect
it should be dropped -- the default WARNS in the rest of the build doesn't
currently apply to kernel modules, and I haven't put too much thought into
whether it makes sense to make it so.
Add EXAMPLES section to the man page showing the use of all flags except for
-S.
While here, clarify -f description. It not only suppresses diagnostic messages
but it also affects the exit status of the command itself. This is shown in two
of the examples.
Approved by: bcr@
Differential Revision: https://reviews.freebsd.org/D26588
Fix unquoted test for an empty value, which broke nextboot(8) on non-ZFS /boot
systems after r365938.
Discussed with: allanjude, tsoome
X-MFC-With: r365938
The purpose of checksize() is to verify that the referenced cluster
chain size matches the recorded file size (up to 2^32 - 1) in the
directory entry. We follow the cluster chain, then multiple the
cluster count by bytes per cluster to get the physical size, then
check it against the recorded size.
When a file is close to 4 GiB (between 4GiB - cluster size and 4GiB,
both non-inclusive), the product of cluster count and bytes per
cluster would be exactly 4 GiB. On 32-bit systems, because size_t
is 32-bit, this would wrap back to 0, which will cause the file be
truncated to 0.
Fix this by using 64-bit physicalSize instead.
This fix is inspired by an Android change request at
https://android-review.googlesource.com/c/platform/external/fsck_msdos/+/1428461
PR: 249533
Reviewed by: kevlo
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26524
This fixes a compile issue under gcc6 which complains about
legacy style C function declarations.
Differential Revision: https://reviews.freebsd.org/D26504
nvmecontrol tries to upload firmware in chunks as large as it thinks
the device permits. It fails to take into account the FWUG value used
by some drives to advertise the size and alignment limits for firmware
chunks.
- Use the firwmare update granularity value from the
- If the granularity is not reported or not restricted, fall back to
the previously existing logic that calculates the max transfer
size based on MDTS.
- Add firmware update granularity to the identify-controller output.
Reviewed by: imp (previous version), chuck
Obtained from: Dell EMC Isilon
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26390
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
API to the sbget() and sbput() interfaces. Specifically they take
a file descriptor pointer rather than the struct uufsd *disk pointer
used by the libufs cgread() and cgwrite() interfaces. Update fsck_ffs
to use these revised interfaces.
No functional changes intended.
Sponsored by: Netflix
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
These are similar to the existing VLAN capabilities.
Reviewed by: kib@
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25873
I have been trying to reduce the time that testsuite runs take for CheriBSD
on QEMU (currently about 22 hours). One of the slowest tests is pfctl_test:
Just listing the available test cases currently takes 98 seconds on a
CheriBSD RISC-V system due to all the processes being spawned. This trivial
patch reduces the time to 92 seconds. The better solution would be to
rewrite the test in C/C++ which I may do as a follow-up change.
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D26417
This would allow interested parties to do experimental runs with an
environment set appropriately to raise all the warnings throughout the
build; e.g. env WARNS=6 NO_WERROR=yes buildworld.
Not currently touching the numerous instances in ^/tools.
MFC after: 1 week
Properly handle the case, when some opcode keywords follow after
the `frag` opcode without additional options.
Reported by: Evgeniy Khramtsov <evgeniy at khramtsov org>
ping has the option to add the (deprecated) TOS byte
using the -z option. Adding the same option, with the
same (deprecated) Traffic Class Byte (nowadays actually
DSCP and ECN fields) to ping6 to validate proper QoS
processing in network switches.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26384
The request offset and length are always unsigned, so print them as
such.
Submitted by: Yoshihiro Ota <ota@j.email.ne.jp>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21388
o Enhance dependency loop logging: print full chain instead of the
last link competing the loop;
o Add -g option to generate dependency graph suitable for GraphViz
visualization, loops and other graph generation issues are highlighted
automatically;
o Add -p option that enables grouping items that can be processed in
parallel.
Submitted by: Boris Lytochkin <lytboris at gmail>
Reviewed by: melifaro
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25389
The badsys() handler for SIGSYS was added as a transtion aid for kernels
lacking sysctl() in 1993. It is unsafe and unsound so remove it rather
than running the risk of a privilege-dropping system call being silently
omitted.
This partially reverts SCCSID 6.12 (Berkeley) 03/03/93 "add code to
change the system security level".
Reviewed by: mckusick, imp, kevans
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26289
- Change the type of hw.pagesizes to OPAQUE, since it returns an array.
- Modify the handler to only truncate the returned length if the caller
supplied an output buffer. This allows use of the trick of passing a
NULL output buffer to fetch the output size, while preserving
compatibility if MAXPAGESIZES is increased.
- Add a "S,pagesize" formatter to sysctl(8).
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26239
The only output from fsck that should go to stderr is the usage message.
if setup() fails then exit with EEXIT rather than 0.
Reviewed by: mckusick
Sponsored by: Netflix
This is a follow up change to r364321 after a discussion about the style.
All near by places use extra blanks in format strings, and while use of the
format string to provide the extra blank may need more cycles than adding 1
to twidth, it generates shorter code and is clearer in the opinion of some
reviewers of the previous change.
Not objected to by: emaste
MFC after: 3 days
- Initialize the disk device fd field in connection_new().
- Close the disk device after handing the connection over
to a child worker.
- Avoid re-opening a disk device for each connection from
the same client, avoiding an fd leak.
PR: 132845
Submitted by: Yoshihiro Ota <ota@j.email.ne.jp>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26168
The macOS assert.h header does not define static_assert when compiling in
C99 mode. To fix this compile with -std=c11.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D25928
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
We have both a system of 'kern' and of 'kernel'. Prefer the latter and
convert this notification to use 'kernel' instead of 'kern'. As a
transition period, continue to also generate the 'kern' notification
until sometime after FreeBSD 13 is branched.
MFC After: 3 days
