The intent is to skip expensive opaque sysctls like tcp_pcblist unless
they are explicitly requested. Sysctl nodes like this don't show up in
sysctl -a, but they do generate output that winds up being dropped,
unless the user specifically requested binary/hex output or opaques.
This reduces the runtime of sysctl in many circumstances on a loaded
system. It also reduces the likelihood that simply gathering
diagnostics on a sick machine (stuck lock, etc) via sysctl -a might
push it over the edge into a total lockup.
Reviewed by: jtl
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D11461
point.
The new "-N" option does a forced dismount of an NFS mount point, but avoids
doing any checking of the mounted-on path, so that it will not get hung
when a vnode lock is held by another hung process on the mounted-on vnode.
The most common case of this is a "umount" with the "-f" option.
Other than avoiding checking the mounted-on path, it performs the same
forced dismount as a successful "umount -f" would do.
This commit includes a content change to the man page.
Tested by: pho
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D11735
Copy the most important test cases from OpenBSD's corresponding
src/regress/sbin/pfctl, those that run pfctl on a test input file and check
correctness of its output. We have also added some new tests using the same
format.
The tests consist of a collection of input files (pf*.in) and
corresponding output files (pf*.ok). We run pfctl -nv on the input
files and check that the output matches the output files. If any
discrepancy is discovered during future development in the source
tree, we know that a regression bug has been introduced into the tree.
Submitted by: paggas
Sponsored by: Google, Inc (GSoC 2017)
Differential Revision: https://reviews.freebsd.org/D11322
- Delete trailing whitespace.
- Replace 8 single column spaces with hard tabs.
- Delete lines with consisting purely of blank space.
- Add space between `return` and `(`, per style(9).
Special care was taken to not blindly replace 8 single column spaces
with tabs; doing so could break tools that do strict string comparisons
with camcontrol output.
This basically makes "mount -uw /" work when the filesystem
mounted on / is NFS, but the one configured in fstab(5) is UFS,
which can happen when you forget to modify fstab.
Note that the whole special case ("else if (argv[0][0] == '/'")
is probably not needed anyway. I'll take a look at removing it
altogether; for now this is a minimally intrusive fix.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11323
so don't imply that. Note that if BIO_DELETE isn't supported, the
operation will fail (as opposed to writing the entire disk with
zeros). Thin storage also benefits from trim. List more accurate
reason why trim helps flash-memory.
After the addition of SUBDIR.yes, uniquifying/ordering the SUBDIRs doesn't
make a whole lot of sense, and it's in effect a half measure.
Ordering SUBDIR (after adding SUBDIR.yes to it) in bsd.subdir.mk is a
separate change that warrants more discussion/testing, because while
the SUBDIR_PARALLEL work largely fixed dependency ordering for SUBDIRs,
there might be downstream FreeBSD consumers that rely on the SUBDIR
ordering.
MFC after: 2 months
Reviewed by: bdrewery
Differential Revision: D11398
After review by the WDC engineers, improve how we pull down the
so-called 'e6' logs. The 'c6' logs are obsolete and support for them
has been removed because FreeBSD needed to pull them in chunks, which
is incompatible with the 0xc6 opcode implementation. Rather than leave
the code in place that produces bad log pulls, remove it.
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Its purpose was to translate the values for msdosfs inode numbers,
which is calculated from the msdosfs structures describing the file,
into the range representable by 32bit ino_t. The translation acted
for filesystems larger than 128Gb, it reserved the range 0xf0000000
(FILENO_FIRST_DYN) to UINT32_MAX and remembered some arbitrary
translation of ino >= FILENO_FIRST_DYN into this range. It consumed
memory that could be only freed by unmount, and the translation was
not stable across remounts.
With ino_t type extended to 64 bit, there is no such issue and values
can be returned without compaction to 32bit. That is, for the native
environments, the translation layer is not necessary and adds
significant undeserved code complexity. For compat ABIs which use
32bit ino_t, the vfs.ino64_trunc_error sysctl provides some measures
to soften the failure mode when inode numbers truncation is not safe.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
When parse_semi fails, free s before returning
parse.c parse_numeric_aggregate
The memory assigned to bufp is complicated, it can either be from the input
parameter buf or allocated locally. Introduce a new variable lbufp to track
when it is assigned locally and to free it when appropriate.
Submitted by: Thomas Rix <trix@juniper.net>
Reviewed by: jhb
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9899
Add -o [no]verify option to mdconfig (and document in man page.)
Implement GEOM attribute MNT::verified to ask md if the backing vnode is
verified.
Check for MNT::verified in cd9660 mount to flag the mount as MNT_VERIFIED if
the underlying device has been verified.
Reviewed by: rwatson
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D2902
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
This includes some whitespace and minor bug fixes relative to NetBSD,
which will be submitted upstream at the conclusion of the makefs
msdos update.
NetBSD revs:
mkfs_msdos.c 1.11
mkfs_msdos.h 1.4
newfs_msdos.8 1.22
newfs_msdos.c 1.44
Submitted by: Siva Mahadevan <smahadevan@freebsdfoundation.org>
Reviewed by: emaste
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
The MAC address reported by `ifconfig ${nic} ether' does not always match
the address in the hardware, as reported by the driver during attach. In
particular, NICs which are components of a lagg(4) interface all report the
same MAC.
When attaching, the NIC driver passes the MAC address it read from the
hardware as an argument to ether_ifattach(). Keep a second copy of it, and
create ioctl(SIOCGHWADDR) to return it. Teach `ifconfig' to report it along
with the active MAC address.
PR: 194386
Reviewed by: glebius
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D10609
The NFSv4 protocol doesn't use the Mount protocol, so it doesn't make sense
to add an entry for an NFSv4 mount to /var/db/mounttab. Also, r308871
modified umount so that it doesn't remove any entry created by mount_nfs.
Reported on freebsd-current@.
Reported by: clbuisson@orange.fr
MFC after: 2 weeks
lease file.
Some routers set very large values for rebind time (Netgear) and these
are erroneously reported as negative in the leasefile. This was due to a
wrong printf format specification of %ld for an unsigned long on 32-bit
platforms.
They would overflow a signed 32-bit time_t on 32 bit architectures. This
was taken care of, but a compiler optimisation makes this behave
erratically. This could be resolved by adding a -fwrapv flag, but
instead we can check the value before adding the current timestamp to
it.
In the lease file values are still wrong though:
option dhcp-rebinding-time -644245096;
PR: 218980
Reported by: Bob Eager
MFC after: 2 weeks
specific parameter.
Tape drives include write protect (WP), Buffered Mode and Speed
settings in the device-specific parameter. Clearing this
parameter on a mode select can have the effect of turning off
write protect or buffered mode, or changing the speed setting of
the tape drive.
Disks report DPO/FUA support via the device specific parameter
for MODE SENSE, but the bit is reserved for MODE SELECT. So we
clear this for disks (and other non-tape devices) to avoid
potential errors from the target device.
sbin/camcontrol/modeedit.c:
Clear the device-specific parameter in the mode page
header if we're not operating on a tape drive.
MFC after: 3 days
Sponsored by: Spectra Logic
name and unit number in camcontrol(8).
Previously camcontrol(8) only supported rescanning or resetting
devices specified by bus:target:lun. This is because for
rescanning at least, you don't have a peripheral name and unit
number (e.g. da4) for devices that don't exist yet.
That is still the case after this change, but in other cases, when
the device does exist in the CAM EDT (Existing Device Table), we
do a careful lookup of the bus/target/lun if the user supplies a
peripheral name and unit number to find the bus:target:lun and then
issue the requested reset or rescan.
The lookup is done without actually opening the device in question,
since a rescan is often done to make a device go away after it has
been pulled. (This is especially true for busses/controllers, like
parallel SCSI controllers, that don't automatically detect changes
in topology.) Opening a device that is no longer there to
determine the bus/target/lun might result in error recovery actions
when the user really just wanted to make the device go away.
sbin/camcontrol/camcontrol.c:
In dorescan_or_reset(), if the use hasn't specified a
numeric argument, assume he has specified a device. Lookup
the pass(4) instance for that device using the transport
layer CAMGETPASSTHRU ioctl. If that is successful, we can
use the returned bus:target:lun to rescan or reset the
device.
Under the hood, resetting a device using XPT_RESET_DEV is
actually sent via the pass(4) device anyway. But this
provides a way for the user to specify devices in a more
convenient way, and can work on device rescans when the
device is going away, assuming it still exists in the EDT.
sbin/camcontrol/camcontrol.8:
Update the man page for the rescan and reset subcommands
to reflect that you can now use a device name and unit
number with them.
Sponsored by: Spectra Logic
MFC after: 3 days
ifconfig doesn't correctly infer mlx interfaces' module names, so it will
attempt to load the mlx(4) module even when not necessary.
Reported by: rstone
MFC after: 3 weeks
X-MFC-With: 317755
Sponsored by: Spectra Logic Corp
* Exit early if kldload(2) fails (1011259). This is the only change that
affects ifconfig's behavior.
* Close memory and resource leaks (1305624, 1305205, 1007100)
* Mark usage() as _Noreturn (1305806, 1305750)
* Fix some dereference after null checks (1011474, 270774)
Reported by: Coverity
CID: 1305624, 1305205, 1007100, 1305806, 1305750, 1011474,
CID: 270774, 1011259
Reviewed by: cem
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D10587
