Commit Graph

33 Commits

Author SHA1 Message Date
glebius
ff6e113f1b The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
glebius
5cc3ac5902 Switch the entire IPv4 stack to keep the IP packet header
in network byte order. Any host byte order processing is
done in local variables and host byte order values are
never[1] written to a packet.

  After this change a packet processed by the stack isn't
modified at all[2] except for TTL.

  After this change a network stack hacker doesn't need to
scratch his head trying to figure out what is the byte order
at the given place in the stack.

[1] One exception still remains. The raw sockets convert host
byte order before pass a packet to an application. Probably
this would remain for ages for compatibility.

[2] The ip_input() still subtructs header len from ip->ip_len,
but this is planned to be fixed soon.

Reviewed by:	luigi, Maxim Dounin <mdounin mdounin.ru>
Tested by:	ray, Olivier Cochard-Labbe <olivier cochard.me>
2012-10-22 21:09:03 +00:00
andre
34a9a386cb Mechanically remove the last stray remains of spl* calls from net*/*.
They have been Noop's for a long time now.
2012-10-18 13:57:24 +00:00
glebius
9086143e8c After r241245 it appeared that in_delayed_cksum(), which still expects
host byte order, was sometimes called with net byte order. Since we are
moving towards net byte order throughout the stack, the function was
converted to expect net byte order, and its consumers fixed appropriately:
  - ip_output(), ipfilter(4) not changed, since already call
    in_delayed_cksum() with header in net byte order.
  - divert(4), ng_nat(4), ipfw_nat(4) now don't need to swap byte order
    there and back.
  - mrouting code and IPv6 ipsec now need to switch byte order there and
    back, but I hope, this is temporary solution.
  - In ipsec(4) shifted switch to net byte order prior to in_delayed_cksum().
  - pf_route() catches up on r241245 changes to ip_output().
2012-10-08 08:03:58 +00:00
bz
a8d3ef905d Clean up some #endif comments removing from short sections. Add #endif
comments to longer, also refining strange ones.

Properly use #ifdef rather than #if defined() where possible.  Four
#if defined(PCBGROUP) occurances (netinet and netinet6) were ignored to
avoid conflicts with eventually upcoming changes for RSS.

Reported by:	bde (most)
Reviewed by:	bde
MFC after:	3 days
2012-01-22 02:13:19 +00:00
bz
b4b3d062cd Correct comments and debug logging in ipsec to better match reality.
MFC after:	3 days
2011-06-08 03:02:11 +00:00
dim
fb307d7d1d After some off-list discussion, revert a number of changes to the
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files.  A better long-term solution is
still being considered.  This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.

Changes reverted:

------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines

Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.

------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines

Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
dim
fda4020a88 Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
2010-11-14 20:38:11 +00:00
bz
de9392f9e0 Make the IPsec SADB embedded route cache a union to be able to hold both the
legacy and IPv6 route destination address.
Previously in case of IPv6, there was a memory overwrite due to not enough
space for the IPv6 address.

PR:		kern/122565
MFC After:	2 weeks
2010-10-23 20:35:40 +00:00
rrs
5db64758fc The proper fix for the delayed SCTP checksum is to
have the delayed function take an argument as to the offset
to the SCTP header. This allows it to work for V4 and V6.
This of course means changing all callers of the function
to either pass the header len, if they have it, or create
it (ip_hl << 2 or sizeof(ip6_hdr)).
PR:		144529
MFC after:	2 weeks
2010-03-12 22:58:52 +00:00
trasz
ab44b532fc Remove ifdefed out part of code, which seems to have originated a decade ago
in OpenBSD.  As it is now, there is no way for this to be useful, since IPsec
is free to forward packets via whatever interface it wants, so checking
capabilities of the interface passed from ip_output (fetched from the routing
table) serves no purpose.

Discussed with:	sam@
2009-11-09 19:53:34 +00:00
rwatson
fb9ffed650 Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks.  Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-08-01 19:26:27 +00:00
rwatson
88f8de4d40 Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used.  Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with:	bz, julian
Reviewed by:	bz
Approved by:	re (kensmith, kib)
2009-07-16 21:13:04 +00:00
rwatson
57ca4583e7 Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator.  Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...).  This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack.  Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory.  Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy.  Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address.  When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by:  bz
Reviewed by:            bz, zec
Discussed with:         gnn, jamie, jeff, jhb, julian, sam
Suggested by:           peter
Approved by:            re (kensmith)
2009-07-14 22:48:30 +00:00
pjd
80ee56b38b Only four out of nine arguments for ip_ipsec_output() are actually used.
Kill unused arguments except for 'ifp' as it might be used in the future
for detecting IPsec-capable interfaces.
2009-06-05 23:53:17 +00:00
bz
9642ff6e28 Add sysctls to toggle the behaviour of the (former) IPSEC_FILTERTUNNEL
kernel option.
This also permits tuning of the option per virtual network stack, as
well as separately per inet, inet6.

The kernel option is left for a transition period, marked deprecated,
and will be removed soon.

Initially requested by:	phk (1 year 1 day ago)
MFC after:		4 weeks
2009-05-23 16:42:38 +00:00
trasz
76f48d741e Don't require packet to match a route (any route; this information wasn't
used anyway, so a typical workaround was to add a dummy route) if it's going
to be sent through IPSec tunnel.

Reviewed by:	bz
2009-04-28 11:10:33 +00:00
rwatson
692f8aa2fa Update stats in struct ipstat using four new macros, IPSTAT_ADD(),
IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly
manipulating the fields across the kernel.  This will make it easier
to change the implementation of these statistics, such as using
per-CPU versions of the data structures.

MFC after:	3 days
2009-04-11 23:35:20 +00:00
bz
8d30abae87 Try to remove/assimilate as much of formerly IPv4/6 specific
(duplicate) code in sys/netipsec/ipsec.c and fold it into
common, INET/6 independent functions.

The file local functions ipsec4_setspidx_inpcb() and
ipsec6_setspidx_inpcb() were 1:1 identical after the change
in r186528. Rename to ipsec_setspidx_inpcb() and remove the
duplicate.

Public functions ipsec[46]_get_policy() were 1:1 identical.
Remove one copy and merge in the factored out code from
ipsec_get_policy() into the other. The public function left
is now called ipsec_get_policy() and callers were adapted.

Public functions ipsec[46]_set_policy() were 1:1 identical.
Rename file local ipsec_set_policy() function to
ipsec_set_policy_internal().
Remove one copy of the public functions, rename the other
to ipsec_set_policy() and adapt callers.

Public functions ipsec[46]_hdrsiz() were logically identical
(ignoring one questionable assert in the v6 version).
Rename the file local ipsec_hdrsiz() to ipsec_hdrsiz_internal(),
the public function to ipsec_hdrsiz(), remove the duplicate
copy and adapt the callers.
The v6 version had been unused anyway. Cleanup comments.

Public functions ipsec[46]_in_reject() were logically identical
apart from statistics. Move the common code into a file local
ipsec46_in_reject() leaving vimage+statistics in small AF specific
wrapper functions. Note: unfortunately we already have a public
ipsec_in_reject().

Reviewed by:	sam
Discussed with:	rwatson (renaming to *_internal)
MFC after:	26 days
X-MFC:		keep wrapper functions for public symbols?
2009-02-08 09:27:07 +00:00
rrs
2688c69180 Adds support for SCTP checksum offload. This means
we, like TCP and UDP, move the checksum calculation
into the IP routines when there is no hardware support
we call into the normal SCTP checksum routine.

The next round of SCTP updates will use
this functionality. Of course the IGB driver needs
a few updates to support the new intel controller set
that actually does SCTP csum offload too.

Reviewed by:	gnn, rwatson, kmacy
2009-02-03 11:00:43 +00:00
bz
604d89458a Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by:	brooks, gnn, des, zec, imp
Sponsored by:	The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
zec
8797d4caec Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by:	julian, bz, brooks, zec
Reviewed by:	julian, bz, brooks, kris, rwatson, ...
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
bz
1021d43b56 Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
bz
fc8ae9a88a Take the route mtu into account, if available, when sending an
ICMP unreach, frag needed.  Up to now we only looked at the
interface MTU. Make sure to only use the minimum of the two.

In case IPSEC is compiled in, loop the mtu through ip_ipsec_mtu()
to avoid any further conditional maths.

Without this, PMTU was broken in those cases when there was a
route with a lower MTU than the MTU of the outgoing interface.

PR:		kern/122338
Tested by:	Mark Cammidge  mark peralex.com
Reviewed by:	silence on net@
MFC after:	2 weeks
2008-04-09 05:17:18 +00:00
bz
33dfb1706b Correct IPsec behaviour with a 'use' level in SP but no SA available.
In that case return an continue processing the packet without IPsec.

PR:		121384
MFC after:	5 days
Reported by:	Cyrus Rahman (crahman gmail.com)
Tested by:	Cyrus Rahman (crahman gmail.com) [slightly older version]
2008-03-14 16:38:11 +00:00
silby
f965c7bdc4 Add FBSDID to all files in netinet so that people can more
easily include file version information in bug reports.

Approved by:	re (kensmith)
2007-10-07 20:44:24 +00:00
bz
3793d89229 Rename option IPSEC_FILTERGIF to IPSEC_FILTERTUNNEL.
Also rename the related functions in a similar way.
There are no functional changes.

For a packet coming in with IPsec tunnel mode, the default is
to only call into the firewall with the "outer" IP header and
payload.

With this option turned on, in addition to the "outer" parts,
the "inner" IP header and payload are passed to the
firewall too when going through ip_input() the second time.

The option was never only related to a gif(4) tunnel within
an IPsec tunnel and thus the name was very misleading.

Discussed at:			BSDCan 2007
Best new name suggested by:	rwatson
Reviewed by:			rwatson
Approved by:			re (bmah)
2007-08-05 16:16:15 +00:00
gnn
aeca69ded5 Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC
option is now deprecated, as well as the KAME IPsec code.
What was FAST_IPSEC is now IPSEC.

Approved by: re
Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
gnn
0cd74db89b Commit IPv6 support for FAST_IPSEC to the tree.
This commit includes only the kernel files, the rest of the files
will follow in a second commit.

Reviewed by:    bz
Approved by:    re
Supported by:   Secure Computing
2007-07-01 11:41:27 +00:00
rwatson
a25f94b5ae Move universally to ANSI C function declarations, with relatively
consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
rwatson
ef5c0fe5ce Remove unneeded mac.h include.
MFC after:	3 days
2006-07-06 13:25:01 +00:00
bz
33da3ee9c3 Make sure the ip data pointer is correct before touching it again
after ipsec4_output processing else KAME IPSec using the handbook
configuration with gif(4) will panic the kernel.

Problem reported by:    t. patterson <tp lot.org>
Tested by:              t. patterson <tp lot.org>
2006-05-05 07:31:03 +00:00
andre
2013a67745 Move the IPSEC related code blocks to their own file to unclutter
and signifincantly improve the readability of ip_input() and
ip_output() again.

The resulting IPSEC hooks in ip_input() and ip_output() may be
used later on for making IPSEC loadable.

This move is mostly mechanical and should preserve current IPSEC
behaviour as-is.  Nothing shall prevent improvements in the way
IPSEC interacts with the IPv4 stack.

Discussed with:	bz, gnn, rwatson; (earlier version)
2006-02-01 13:55:03 +00:00