Commit Graph

27 Commits

Author SHA1 Message Date
Andrey A. Chernov
2073104f87 Manipulate with AltGR Led (really CapsLock Led) only in K_XLATE mode, because
all other modes not set ALKED flag and it means that CapsLock always turned
off for them.
Real bug example is X11 which never turn on CapsLock with Russian keyboard.

PR:		18651
Submitted by:	"Mike E. Matsnev" <mike@po.cs.msu.su>
2000-05-28 12:43:24 +00:00
Kazutaka YOKOTA
db3e34cb71 - Properly keep track of I/O port resources.
- Use bus_space_read/write() to access the ports.
2000-03-19 03:25:13 +00:00
Kazutaka YOKOTA
a68d00e3fe One more patch for the atkbd driver. It will make sure that the
keyboard port and interrupt is enabled and the driver is attached even
when the keyboard itself is not present when the system is booting.
(This has been the behavior through out 2.X and 3.X, but is somehow
broken in 4.0.)

# I certainly don't recommend people to `hot-plug' the AT keyboard,
# because the interface isn't designed for hot-plugging and such act
# will often break the keyboard controller.  But, so many people want to
# do that anyway...

Approved by: jkh
2000-03-11 07:44:10 +00:00
Kazutaka YOKOTA
aec1fa1ca3 - Be slightly more cautious and try to make more sure the keyboard
input queue is emptied when initializing the keyboard controller.
- Remove an unnecessary `if' statement.

Approved by: jkh
2000-02-11 01:22:30 +00:00
Peter Wemm
8f8e587948 Use config's conditional compilation rather than using #ifdefs that make
modular compilation harder.  I'm doing this because people seem to like
cut/pasting examples of bad practices in existing code.
2000-01-29 15:08:56 +00:00
Kazutaka YOKOTA
7c6f57a384 - Add some comment from bde on the keyboard interrupt.
- Fix obsolete comments.
2000-01-20 13:32:53 +00:00
Kazutaka YOKOTA
7642cc829e Rework shifta/ctla/alta key handling. It appears that there was
misunderstanding between the PR originator and me.  I hope I got it
right this time.
2000-01-11 13:39:05 +00:00
Kazutaka YOKOTA
56f5e27c4b Obtain the initial key repeat rate setting via BIOS in i386 if
possible.
2000-01-10 08:52:32 +00:00
Kazutaka YOKOTA
934d11e395 Add some keyboard IDs. 2000-01-10 08:50:43 +00:00
Kazutaka YOKOTA
579958932a - Remember the keyboard repeat delay and rate.
- Add a new ioctl, KDGETREPEAT, to retrieve the keyboard repeat rate.
- Delete unnecessary #include.
1999-12-13 09:31:43 +00:00
Kazutaka YOKOTA
82d654e855 Add support new keys: lshifta, rshifta, lctrla, rctrla, lalta, and
ralta.  These keys combine shift/ctrl/alt function and the AltLock
function.  When these keys pressed together with another key, they act
just like the ordinary shift/ctrl/alt keys.  When these keys are
pressed and released alone, Alt lock state is toggled.

PR: kern/12475
1999-12-10 04:31:33 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Kazutaka YOKOTA
800da3b22a - Remove cdevsw entry points in individual keyboard drivers;
instead, use generic entry points for all drivers.
- Eliminate bogus makedev().
- Eliminate softc in the lower drivers, as it is no longer necessary.

Submitted (95%) by: phk
1999-08-22 09:52:33 +00:00
Kazutaka YOKOTA
6c6028fffb Correctly save `flags' bits. 1999-08-15 06:06:14 +00:00
Kazutaka YOKOTA
29e59d7deb - Move the `return' statement the correct place so that the keyboard
won't be initialized if `atkbd?' is disabled.
1999-07-18 06:16:25 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Kazutaka YOKOTA
d3c87b8512 - Include isa/isareg.h rather than i386/isa/isa.h for i386.
- Remove unused (thus, commented out) section of code.
1999-05-20 09:49:33 +00:00
Kazutaka YOKOTA
83fc7c6ced The previous commit was wrong! This is the correct one ;-< 1999-05-18 11:05:58 +00:00
Kazutaka YOKOTA
194da42d48 Don't confuse cursor keys with numpad keys when composing a char code.
PR: kern/10988
1999-05-09 05:00:19 +00:00
Kazutaka YOKOTA
57600c2385 Minor tweak after the introduction of new-bus to i386; properly
check "disabled" and "flags" probe hints.
1999-05-09 04:59:24 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Kazutaka YOKOTA
e9deda23ae Keyboard driver update in preparation for the USB keyboard driver.
- Refined internal interface in keyboard drivers so that:
  1. the side effect of device probe is kept minimal,
  2. polling mode function is added,
  3. and new ioctl and configuration options are added (see below).

- Added new ioctl: KDSETREPEAT
  Set keyboard typematic rate.  There has existed an ioctl command,
  KDSETRAD, for the same purpose.  However, KDSETRAD is dependent on
  the AT keyboard.  KDSETREPEAT provides more generic interface.
  KDSETRAD will still be supported in the atkbd driver.

- Added new configuration options:
  ATKBD_DFLT_KEYMAP
  Specify a keymap to be used as the default, built-in keymap.
  (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP,
  SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap.
  These options are now gone for good.  The new option is more general.)

  KBD_DISABLE_KEYMAP_LOADING
  Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
Kazutaka YOKOTA
ffba82a9ae - Fixed the bug which always ignored Ctrl-Pause/Break on the AT 101
keyboard.
- Translate some keycode for the 84 keyboard so that the 84 keyboard
  and the 101 keyboard become more compatible in terms of keycodes.
- Updated the built-in keymaps so that it is in line with the recent
  changes in share/syscons/keymaps.
- Added some comment on the Pause/Break key on the 101 keyboard.
1999-01-28 10:55:55 +00:00
Kazutaka YOKOTA
f359876ff1 syscons
- Bring down the splash screen when a vty is opened for the first
  time.
- Make sure the splash screen/screen saver is stopped before
  switching vtys.
- Read and save initial values in the BIOS data area early.
  VESA BIOS may change BIOS data values when switching modes.
- Fix missing '&' operator.
- Move ISA specific part of driver initialization to syscons_isa.c.

atkbd
- kbdtables.h is now in /sys/dev/kbd.

all
- Adjust for forthcoming alpha port.  Submitted by: dfr
1999-01-19 11:31:22 +00:00
Kazutaka YOKOTA
00f19754a4 Use the correct macro to test flags; we need KBD_IS_INITIALIZED here,
not KBD_IS_PROBED.
1999-01-13 11:19:19 +00:00
Kazutaka YOKOTA
617b908036 Add the new keyboard driver and video card driver. They will be
used by console drivers.

(They are not yet activated yet.  Wait for announcement later.)
1999-01-09 02:44:50 +00:00