This is part of a long-term goal of merging Book-E and AIM into a single GENERIC
kernel. As more work is done, the struct may be optimized further.
Reviewed by: nwhitehorn
Summary:
After revision rS328534('PPC64: use hwref instead of cpuid'), FreeBSD on
powerpc64 virtual machine panics since it is unable to read the
timebase, showing the following error:
get-property for timebase-frequency on zero phandle
panic: Unable to determine timebase frequency!
With the change above, cpuref->cr_hwref does not contain the phandle
anymore, thus, it never reads the proper CPU entry in OF.
Submitted by: Breno Leitao
Differential Revision: https://reviews.freebsd.org/D14204
significant source of cache line contention from vm_page_alloc(). Use
accessors and vm_page_unwire_noq() so that the mechanism can be easily
changed in the future.
Reviewed by: markj
Discussed with: kib, glebius
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14273
We don't support older compilers. Most of the code in these files is
for pre-3.0 gcc, which is at least 15 years obsolete. Move to using
phk's sys/_stdargs.h for all these platforms.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14323
r328113 and affecting SMP systems.
The way the time is set on PowerMacs is racy and relies on all the
CPUs in the system setting a register simultaneously in a rendezvous. A
few-cycle delay can result in out-of-sync times, which can break the
scheduler and result in calls like mtx_sleep() and pause() never timing out
if the thread is migrated while sleeping. r328113 added a call to a no-op
function between the beginning of the rendezvous and setting the time that
was only called on APs and added enough cycles to cause a problematic offset.
For some reason, the fan-management code was the first place this appeared.
Clue from: andreast
Reported by: many
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
The L3 cache controller (Corenet Platform Cache) is listed with one of its
compatible strings as "cache", which this driver can't attach to. Restrict
to a known list of primary cache controller strings, as found in the l2cache
devicetree binding.
threads from compile-time defines to global variables. This removes a
significant amount of duplicated runtime patches to the compile-time
defines, centralizing the conditional logic in the early startup code.
Reviewed by: jhibbits
It turns out that under some circumstances we can get DSI or DSE before we set
LPCR and LPID so we should set it as early as possible.
Authored by: Patryk Duda <pdk@semihalf.com>
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
On CHRP and PowerNV, use the interrupt server number in the cpuref and pcpu
hwref field instead of the device-tree phandle and make the CPU IDs reported
to the scheduler dense and with the BSP at 0.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D14011
Cleaning up AP startup routines. This is a mix of changes
required to make PowerNV running and to modify the code
to be more robust. Previously, some races were seen if more
than 90CPUs were online.
Authored by: Patryk Duda <pdk@semihalf.com>
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D14026
used with hashed page tables on AIM and place it into a new, modular pmap
function called pmap_decode_kernel_ptr(). This function is the inverse
of pmap_map_user_ptr(). With POWER9 radix tables, which mapping to use
becomes more complex than just AIM/BOOKE and it is best to have it in
the same place as pmap_map_user_ptr().
Reviewed by: jhibbits
There's no reason not to build modules for 64-bit QorIQ devices. This
config has evolved to be analogous to the AIM GENERIC64 kernel, so will grow
to match it in more ways as well.
Summary:
Rather than duplicating the checks for programmatic traps all over the code, put
it all in one function. This helps to remove some of the #ifdefs between AIM
and Book-E.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D14082
In a corner case we could fall into OOB error.
Authored by: Patryk Duda <pdk@semihalf.com>
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
MSI/MSI-x interrupts are edge-triggered. If an interrupt
arrives when IRQ line is masked, it will be lost and will
never recover. Perform MSI_EOI always after unmask to give
a chance for PHB/XICS to send an interrupt again if MSI/MSI-x
pending bit is set in MSI/MSI-x BAR space.
Submitted by: Wojciech Macek <wma@semihalf.org>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Commits r326203 and r326978 broke 64-bit booke kernels by introducing a 1MB
zero-pad between the ELF header and the start of the kernel. This didn't
cause a build failure, but caused kernels to need to be loaded into memory
1MB lower, which could easily break scripts expecting previous behavior.
This change matches the similar change made to AIM in r327358.
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
kernel by PHYS_TO_DMAP() as previously present on amd64, arm64, riscv, and
powerpc64. This introduces a new MI macro (PMAP_HAS_DMAP) that can be
evaluated at runtime to determine if the architecture has a direct map;
if it does not (or does) unconditionally and PMAP_HAS_DMAP is either 0 or
1, the compiler can remove the conditional logic.
As part of this, implement PHYS_TO_DMAP() on sparc64 and mips64, which had
similar things but spelled differently. 32-bit MIPS has a partial direct-map
that maps poorly to this concept and is unchanged.
Reviewed by: kib
Suggestions from: marius, alc, kib
Runtime tested on: amd64, powerpc64, powerpc, mips64
In platform_smp_ap_init we are doing some crucial code (eg. set LPCR register)
which have influence over further execution.
Practiculary in PowerNV platform we have experienced Data Storage Interrupt
before we set apropriate LPCR. It caused code execution from location which was
legal in bootloader (petitboot based on linux) but illegal in FreeBSD
Set stack pointer to correct value after thread's stack pointer restore
Restoring new thread's stack pointer caused stack corruption because
restored stack pointer didn't point to callee (cpu_switch) stack frame but
caller stack frame.
As a result we had mysterious errors in caller function (sched_switch).
Solution: simply set stack pointer to correct value
Also, initialize TOC to a valid pointer once the thread is being
created.
Created by: Patryk Duda <pdk@semihalf.com>
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Reviewed by: nwhitehorn
Differential revision: https://reviews.freebsd.org/D13947
Sponsored by: QCM Technologies
Zero BSS always. The only case when this operation is
ommitted is when booting on BookE.
Created by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Reviewed by: imp, nwhitehorn
Differential revision: https://reviews.freebsd.org/D13948
Sponsored by: QCM Technologies
> Description of fields to fill in above: 76 columns --|
> PR: If a GNATS PR is affected by the change.
> Submitted by: If someone else sent in the change.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after: N [day[s]|week[s]|month[s]]. Request a reminder email.
> MFH: Ports tree branch name. Request approval for merge.
> Relnotes: Set to 'yes' for mention in release notes.
> Security: Vulnerability reference (one per line) or description.
> Sponsored by: If the change was sponsored by an organization.
> Differential Revision: https://reviews.freebsd.org/D### (*full* phabric URL needed).
> Empty fields above will be automatically removed.
M sys/powerpc/conf/GENERIC64
Add missing little-endian 64-bit read and write. Since there
is no direct ASM opcode for this, perform byte swap if
necessary.
Created by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: QCM Technologies
Use current userspace address for segment mapping. Previously,
there was a bug which made the funciton constantly using the userspace
base address which could cause data integrity issues.
Created by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: QCM Technologies
Add CXGBE driver which is required for PowerNV system.
Also, remove AHCI which does not work in BigEndian.
Created by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: QCM Technologies
FreeBSD prints text char-by-char, which is not what OPAL
is designed to. Poll events more frequently to avoid buffer
overflow and loosing data.
Created by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: QCM Technologies
Fixes:
- map all devices to PE0
- use 1:1 TCE mapping
- provide the same TCE mapping for all PEs (not only PE0)
- add TCE reset and alignment (required by OPAL)
Created by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: QCM Technologies
Make XICS to be OPAL-aware.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@semihalf.com>
Sponsored by: FreeBSD Foundation
P1022 SATA controller may set the wrong CCR bit for a command completion.
This would previously cause an interrupt storm. Solve this by marking all
commands complete, and letting the end_transaction deal with the successes.
Causes no problems on P5020.
While here, fix a minor bug in collision detection. The Freescale SATA
controller only has 16 slots, not 32.
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
to which it is specific, rather than in the generic AIM startup code. This
will be required to support the radix-table-based MMU introduced with POWER9.
buffers into a new pmap-module function pmap_map_user_ptr() that can
be implemented by the respective modules. This is required to implement
non-segment-based AIM-ish MMU systems such as the radix-tree page tables
introduced by POWER ISA 3.0 and present on POWER9.
Reviewed by: jhibbits
using a new macro PHYS_TO_DMAP, which deliberately has the same name as the
equivalent macro on amd64. This also sets the stage for moving the direct
map to another base address.
