1. Limit secs to INT32_MAX / 2 to avoid errors from kern_setitimer().
Assert that kern_setitimer() returns 0.
Remove bogus cast of secs.
Fix style(9) issues.
2. Increment the return value if the remaining tv_usec value more than 500000 as a Linux does.
Pointed out by: [1] Bruce Evans
MFC after: 1 week
There's some upcoming work to add new chipset support here and I'd
like to only add 802.11n support to one driver, instead of both
urtwn and rtwn.
There's also missing support for things like 802.11n, some powersave
work, bluetooth integration/coexistence, etc, and also newer parts
(like 8192EU, maybe some 11ac parts, not sure yet.)
So, this is hopefully the first step in a longer set of steps to unify
rtwn/urtwn and extend it with more interesting chipset and functionality
support.
Reviewed by: kevlo
An IPI cannot be sent via the local APIC if a previous IPI is still
being delivered. Attempts to send an IPI will wait for a pending IPI
to clear. Prior to r278325 these checks used a spin loop with a
hardcoded maximum count which broke AP startup on some systems.
However, r278325 also enforced a minimum latency of 5 microseconds if an
IPI was still pending which resulted in a measurable performance hit.
This change reduces that minimum latency to 1 microsecond.
Tested by: stas
MFC after: 3 days
For the !unmap case it may happen that pbuf gets called unreferenced
when vm_fault_quick_hold_pages() fails.
Initialize it so it doesn't cause trouble.
CID: 1352776
Reviewed by: jhb
MFC after: 1 week
This is a subset of what's in the linux 802.11ac implementation.
I've verified that the bits that mention an 802.11ac draft are
still the same in 802.11ac-2013 and noted it accordingly.
This is for the most part one big no-op.
Obtained from: 802.11ac-2013.pdf
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
In dual emac mode, the CPSW subsystem provides two independent ethernets.
This is implemented (as recommended by TI's TRM) with a mixture of switch
settings (vlans) and specific features of CPSW subsystem.
The driver was splitted to accommodate the shared parts (RX and TX rings
for example) while it still provides two independent ethernets.
Each of the ethernet ports driver has it's own set of MDIO registers among
the other private settings.
Previously this driver always operate in promisc mode, now the Switch ALE
(address table entry) is properly initialized and enabled.
The driver is also tested (and known to work) with both ports operating in
single port mode (active_slave 0 or 1).
Tested on uBMC (dual emac mode, both ports in single mode, giga and fast
ethernet) and BBB (single port, fast ethernet).
Sponsored by: Rubicon Communications (Netgate)
This allows some simplification of its callers. No functional change
intended.
Tested by: Larry Rosenman (as part of a larger change)
MFC after: 1 month
pointer isn't NULL, it is safe, because we are handling IPV6_PKTINFO
socket option in this block of code. Also, use in6ifa_withaddr() instead
of ifa_withaddr().
We changed the ABI for ARM in 10, an removed support for the old ABI in 11,
as such binaries from these releases are unable to be run on a head kernel.
Reviewed by: bz, emast
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5652
Figure out if the chip is counting PAUSE frames in the "normal" stats
and take them out if it is. This fixes a bug in the tx stats because
the default hardware behavior is different for Tx and Rx but the driver
was treating both the same way. The result was that OPACKETS, OBYTES,
and OMCASTS were under-reported (if tx_pause > 0) before this change.
Note that the mac_stats sysctl still gives you the raw value of these
statistics straight from the device registers.
during argument validity verification, unbound zero'ing of the process LDT
and adjacent memory can be initiated from usermode.
Submitted by: CORE Security
Patch by: kib
Security: SA-16:15
r296861 addressed a build failure due to undefined SYS_freebsd6_lseek
by adding a COMPAT_FREEBSD6 conditional, but we do not support FreeBSD 6
compatibility on armeb anyway so remove it completely.
Reviewed by: andrew, bz
Differential Revision: https://reviews.freebsd.org/D5643
the ABI in 10.0, and have removed support for the old ABI in 11. As such
any of these options to provide compatibility prior to 10 are unneeded.
Sponsored by: ABT Systems Ltd
The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C,
PMIC, GPIO, CPU temperature and clock.
Note: The PCIe driver is pure mash at this moment. It will be reworked
immediately when both D5237 and D2579 enter the current tree.
