o Allow setting keymap in FDT, use hardcoded one by default
o Represent fallback keymap as a list rather than directly usable M*N array
Submitted by: Maxim Ignatenko <gelraen.ua@gmail.com>
current RADXA config. Radxa Rock (RR) boards have few types such as
RR (full version), RR Lite and some variants of RR engineering samples.
Add kernel config and FDT file for RR Lite board.
Approved by: stas (mentor)
If a vt(4) font does not exactly fit the screen dimensions, the console
window is offset so that it is centered. A rectangle is drawn at the
top, left, right, and bottom of the screen, to erase any leftovers that
are outside of the new usable console area.
If the x offset or y offset is 0 then the left border or top border
respectively is not drawn. The right and bottom borders may be one
pixel larger than necessary due to rounding, and are always drawn.
Prior to this change a 0 offset would result in a panic when calling
vt_drawrect with an x or y coordinate of -1.
Sponsored by: The FreeBSD Foundation
vt_grow may be called with a new size that's larger than previous but
does not require reallocation - for example, when the number of columns
is the same and new number of rows is less than the history size.
Prior to this change we would fail to update vb_scr_size, and then hit
a KASSERT when trying to write to the newly visible rows.
Sponsored by: The FreeBSD Foundation
ifa_ifwithnet() and ifa_ifwithdstaddr() The legacy functions will call the
_fib() versions with RT_ALL_FIBS, preserving legacy behavior.
sys/net/if_var.h
sys/net/if.c
Add legacy-compatible functions as described above. Ensure legacy
behavior when RT_ALL_FIBS is passed as fibnum.
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/net/route.c
sys/net/rtsock.c
sys/netinet6/nd6.c
Call with _fib() functions if we must use a specific fib, or the
legacy functions otherwise.
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
Improve the udp_dontroute test. The bug that this test exercises is
that ifa_ifwithnet() will return the wrong address, if multiple
interfaces have addresses on the same subnet but with different
fibs. The previous version of the test only considered one possible
failure mode: that ifa_ifwithnet_fib() might fail to find any
suitable address at all. The new version also checks whether
ifa_ifwithnet_fib() finds the correct address by checking where the
ARP request goes.
Reported by: bz, hrs
Reviewed by: hrs
MFC after: 1 week
X-MFC-with: 264905
Sponsored by: Spectra Logic
(XScale mainly) expects the memory located before the kernel to be mapped,
and use it to allocate the page tables, the various stacks, etc.
A better fix would probably be to rewrite the various bla_machdep.c to stop
using that RAM, but I'm not so inclined to do it, especially since I don't
have hardware for all of them.
correctly prepare KGSBASE msr to restore the user descriptor base on
the last swapgs during return to usermode.
Reported and tested by: peterj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
mode.
Put the htonl(), htons(), ntohl() and ntohs() declarations under
__POSIX_VISIBLE >= 200112. POSIX.1-2001 and newer require these to be
exposed from <netinet/in.h> (as well as <arpa/inet.h>).
Note that it may be unnecessary to check __POSIX_VISIBLE >= 200112 because
older versions of POSIX and the C standard do not define this header.
However, other places in the same file already perform the check.
PR: 188316
Submitted by: Christian Neukirchen
- Update FDT file for BERI DE4 boards.
- Add needed kernel configuration keywords.
- Rename module to saf1761otg so that the device unit number does not
interfere with the hardware ID in dmesg.
Sponsored by: DARPA, AFRL
- Use an interrupt filter for handling the data path interrupts. This
increases the throughput significantly.
- Implement support for USB suspend and resume in USB host mode.
Sponsored by: DARPA, AFRL
they then pick up an opt_global.h from KERNBUILDDIR having PAE defined.
Thus, build all modules by default except those which still really are
defective as of r266799.
- Minor style cleanup.
MFC after: 1 week
flags that has several bits cleared. The RF_WANTED and RF_FIRSTSHARE
bits are invalid in this context, and we want to defer setting RF_ACTIVE
in r_flags until later. This should make rman_get_flags() return
the correct answer in all cases.
Add a KASSERT() to catch callers which incorrectly pass the RF_WANTED
or RF_FIRSTSHARE flags.
Do a strict equality check on the share type bits of flags. In
particular, do an equality check on RF_PREFETCHABLE. The previous
code would allow one type of mismatch of RF_PREFETCHABLE but disallow
the other type of mismatch. Also, ignore the the RF_ALIGNMENT_MASK
bits since alignment validity should be handled by the amask check.
This field contains an integer value, but previous code did a strange
bitwise comparison on it.
Leave the original value of flags unmolested as a minor debug aid.
Change the start+amask overflow check to a KASSERT() since it is just
meant to catch a highly unlikely programming error in the caller.
Reviewed by: jhb
MFC after: 1 month
- Make the USB hardware skip PTDs which are not allocated.
- Peek host memory twice. Sometimes the PTD status is incorrectly
returned as zero.
- Ensure the host channel is always freed when software TD
is completing.
- Add correct configuration of interrupt polarity and type.
- Set CERR to 2 for asynchronous traffic to avoid having to
reactivate the PTD when a NAK token is received.
- Fix detection of STALL PID.
Sponsored by: DARPA, AFRL
For IPv6-in-IPv4, you may need to do the following command
on the tunnel interface if it is configured as IPv4 only:
ifconfig <interface> inet6 -ifdisabled
Code logic inspired from NetBSD.
PR: kern/169438
Submitted by: emeric.poupon@netasq.com
Reviewed by: fabient, ae
Obtained from: NETASQ
physical addresses.
- Nuke the unused softc of emujoy(4).
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
- Based on actual usage and on what Linux does, dummy_page.addr should
contain the physical bus address of the dummy page rather than its
virtual one. As a side-effect, correcting this bug fixes compilation
with PAE support enabled by getting rid of an inappropriate cast.
- Also based on actual usage of dummy_page.addr, theoretically Radeon
devices could do a maximum of 44-bit DMA. In reality, though, it is
more likely that they only support 32-bit DMA, at least that is what
radeon_gart_table_ram_alloc() sets up for, too. However, passing ~0
to drm_pci_alloc() as maxaddr parameter translates to 64-bit DMA on
amd64/64-bit machines. Thus, use BUS_SPACE_MAXSIZE_32BIT instead,
which the existing 32-bit DMA limits within the drm2 code spelled as
0xFFFFFFFF should also be changed to.
Reviewed by: dumbbell
MFC after: 1 week
Sponsored by: Bally Wulff Games & Entertainment GmbH
Some Linux futex ops atomically verifies that the futex address uaddr
(uval) contains the value val. Comparing signed uval and unsigned val
may lead to an unexpected result, mostly to a deadlock.
So copyin uaddr to an unsigned int to compare the parameters correctly.
While here change ktr records to print parameters in more readable format.
Tested by eadler@
MFC after: 3 days
situation checked by assert is verified to not take place in
vm_map_wire(), and protection permissions on the wired entry can be
revoked afterward.
Reported by: markj
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
was not allocating space for the parameter save area in the stack frame.
If the compiler chose to save the argument to the signal handler on the
stack, it would overwrite the first 32 bits of the sigaction struct with
it, corrupting it for a subsequent invocation.
PR: powerpc/183040
MFC after: 8 days
BUS_DMA_KMEM_ALLOC. They serve the same purpose, but using the flag
means that the map can be NULL again, which in turn enables significant
optimizations for the common case of no bouncing.
Obtained from: Netflix, Inc.
MFC after: 3 days
- Switch from timeout() to callout_*() for per-request timers.
- Use device_find_child() in the identify routine.
- Use device_printf() instead of passing device_get_nameunit() to
printf().
- Expand the SBP_LOCK coverage simplifying the locking.
- Uninline STAILQ_FOREACH_SAFE().
Tested by: sbruno
