It's a class0 driver that implements some pcib methods and creates
a pci bus as its children.
The "ofw_pci" name will be used by a new driver that will be a subclass
of the pci bus.
No functional changes intended.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30226
While here, fix all links to older en_US.ISO8859-1 documentation
in the src/ tree.
PR: 255026
Reported by: Michael Büker <freebsd@michael-bueker.de>
Reviewed by: dbaio
Approved by: blackend (mentor), re (gjb)
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D30265
Summary:
There's no need to use a while loop in the IPI handler, the message list
is cached once and processed. Instead, since the existing code calls
ffs(), sort the handlers, and use a simple 'if' sequence.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D30018
Summary:
Some methods are split between DMAP and non-DMAP, conditional on
hw_direct_map variable. Rather than checking this variable every time,
use it to install different functions via IFUNCs.
Reviewed By: luporl
Differential Revision: https://reviews.freebsd.org/D30071
Summary:
Since PCPU can live in a GPR for a while longer, let it, rather than
re-getting it in yet another register. MFSPR is an expensive operation,
12 clock latency on POWER9, so the fewer operations we need, the better.
Since the check is tightly coupled to the fetch, by reducing the number
of fetch+check, we reduce the stalls, and improve the performance
marginally. Buildworld was measured at a ~5-7% improvement on a single
run.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D30003
Adds OPAL_CONSOLE_WRITE error handling and implements a call to
OPAL_CONSOLE_WRITE_BUFFER_SPACE to verify if there's enough space
before writing to console.
This fixes serial port output getting corrupted on fast writes, like
on "dmesg" output.
Tested on Raptor Blackbird running powerpc64 BE kernel
Reviewed by: luporl
Sponsored by: Eldorado Reserach Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29063
types.h defines device_t as a typedef of struct device *. struct device
is defined in subr_bus.c and almost all of the kernel uses device_t.
The LinuxKPI also defines a struct device, so type confusion can occur.
This causes bugs and ambiguity for debugging tools. Rename the FreeBSD
struct device to struct _device.
Reviewed by: gbe (man pages)
Reviewed by: rpokala, imp, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29676
This is intended to be used with memory mapped IO, e.g. from
bus_space_map with no flags, or pmap_mapdev.
Use this new memory type in the map request configured by
resource_init_map_request, and in pciconf.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29692
Radix MMU code was missing TLB invalidations when some Level 3 PDEs were
modified. This caused TLB multi-hit machine check interrupts when
superpages were enabled.
Reviewed by: jhibbits
MFC after: 2 weeks
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D29511
Older G4 and G3 models have a programmer's switch that can be used to
generate an interrupt to drop into the debugger.
This code hadn't been tested for a long time. It had been broken back
in 2005 in r153050.
Repair and modernize the code and add it to GENERIC.
Reviewed by: jhibbits (approved w/ removal of unused sc_dev var)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D29131
Summary:
They're nearly identical, so don't use two copies. Merge the newer
driver into the older one, and move it to a common location.
Add the Semihalf and associated copyrights in addition to mine, since
it's a non-trivial amount of code merged.
Reviewed By: mw
Differential Revision: https://reviews.freebsd.org/D29520
ULE uses this topology to try and preserve locality when migrating
threads between CPUs and when performing work stealing. Ensure that on
NUMA systems it will at least take the NUMA topology into account.
Reviewed by: bdragon, jhibbits (previous version)
Tested by: bdragon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28580
This only works on single-CPU G4 systems, and more work is needed for
dual-CPU systems. That said, platform sleep does not work, and this is
currently only used for PMU-based CPU speed change.
The elimination of the platform_smp_timebase_sync() call is so that the
timebase sync rendezvous can be enhanced to perform better
synchronization, which requires a full rendezvous. This would be
impossible to do on this single-threaded run.
Rename cpu_sleep() to mpc745x_sleep() to denote what it's actually
intended for. This function is very G4-specific, and will not work on
any other CPU. This will afterward eliminate a
platform_smp_timebase_sync() call by directly updating the timebase
instead.
The POWER7 subword atomics were not using the correct instructions for
byte and halfword stores in the atomic_fcmpset code.
This only affects builds with custom CFLAGS that have explicitly enabled
ISA_206_ATOMICS.
--Eliminate a big ifdef that encompassed all currently-supported
architectures except mips and powerpc32. This applied to the case
in which we've allocated a superpage but the pager-populated range
is insufficient for a superpage mapping. For platforms that don't
support superpages the check should be inexpensive as we shouldn't
get a superpage in the first place. Make the normal-page fallback
logic identical for all platforms and provide a simple implementation
of pmap_ps_enabled() for MIPS and Book-E/AIM32 powerpc.
--Apply the logic for handling pmap_enter() failure if a superpage
mapping can't be supported due to additional protection policy.
Use KERN_PROTECTION_FAILURE instead of KERN_FAILURE for this case,
and note Intel PKU on amd64 as the first example of such protection
policy.
Reviewed by: kib, markj, bdragon
Differential Revision: https://reviews.freebsd.org/D29439
ipi_msg_count is inaccessible outside this file and is never read.
It was introduced in the original SMP support code in r178628 and was never
actually used anywhere.
Remove it to slightly improve IPI performance.
Submitted by: jhibbits
MFC after: 1 week
Now that superpages for HPT MMU has landed, finish implementation of
pmap_mincore by adding support for superpages.
Submitted by: Fernando Eckhardt Valle <fernando.valle@eldorado.org.br>
Reviewed by: bdragon, luporl
MFC after: 1 week
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D29230
The remote protocol allows for implementations to report more specific
reasons for the break in execution back to the client [1]. This is
entirely optional, so it is only implemented for amd64, arm64, and i386
at the moment.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/Stop-Reply-Packets.html
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 51
Differential Revision: https://reviews.freebsd.org/D29174
On an INVARIANTS kernel on 32-bit Book-E, we were panicing when running
the libproc tests. This was caused by extra pv entries being generated
accidentally by the pmap icache invalidation code.
Use the same VA (i.e. 0) when freeing the temporary mapping, instead of
some arbitrary address within the zero page.
Failure to do this was causing kernel-side icache syncing to leak
PVE entries when invalidating icache for a non page-aligned address, which
would later result in pages erroneously showing up as mapped to vm_page.
This bug was introduced in r347354 in 2019.
Reviewed by: jhibbits (in irc)
Sponsored by: Tag1 Consulting, Inc.
Implements bus_map_resource and bus_unmap_resource DEVMETHODs to be
used by powerpc targets. This is identical to the amd64 code.
Required by virtio-modern.
Reviewed by: bryanv
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28012
Use the new kdb variants. Print more specific error messages.
Reviewed by: jhb, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29156
This basically mirrors what already exists in ddb, but provides a
slightly improved interface. It allows the caller to specify the
watchpoint access type, and returns more specific error codes to
differentiate failure cases.
This will be used to support hardware watchpoints in gdb(4).
Stubs are provided for architectures lacking hardware watchpoint logic
(mips, powerpc, riscv), while other architectures are added individually
in follow-up commits.
Reviewed by: jhb, kib, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29155
At this point in startup, vm_ndomains has not been initialized. Switch
to checking kenv instead.
Fixes incorrect NUMA information being set on multi-domain systems like
Talos II.
Submitted by: jhibbits
MFC after: 2 weeks
Summary:
Since powerpcspe doesn't have a traditional FPU, there's no FPSCR, and
no FPRs. Attempting to use them triggers an illegal instruction trap.
Fix this unconditional cleanup of FPSCR by conditionalizing it on the
FPU being used in the outgoing thread.
Reviewed By: bdragon
Differential Revision: https://reviews.freebsd.org/D29452
This change serves two purposes.
First, we take advantage of the compiler provided endian definitions to
eliminate some long-standing duplication between the different versions
of this header. __BYTE_ORDER__ has been defined since GCC 4.6, so there
is no need to rely on platform defaults or e.g. __MIPSEB__ to determine
endianness. A new common sub-header is added, but there should be no
changes to the visibility of these definitions.
Second, this eliminates the hand-rolled __bswapNN() routines, again in
favor of the compiler builtins. This was done already for x86 in
e6ff6154d2. The benefit here is that we no longer have to maintain our
own implementations on each arch, and can instead rely on the compiler
to emit appropriate instructions or libcalls, as available. This should
result in equivalent or better code generation. Notably 32-bit arm will
start using the `rev` instruction for these routines, which is available
on armv6+.
PR: 236920
Reviewed by: arichardson, imp
Tested by: bdragon (BE powerpc)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29012
PowerISA 2.07B says that the low-order p-12 bits of the real page number
contained in ARPN and LP fields of a PTE must be 0s and are ignored
by the hardware (Book III-S, 5.7.7.1), where 2^p is the actual page size
in bytes, but we were clearing only the LP field.
This worked on bare metal and QEMU with KVM, that ignore these bits,
but caused a kernel panic on QEMU with TCG, that expects them to be
cleared.
This fixes running FreeBSD with HPT superpages enabled on QEMU
with TCG.
MFC after: 2 weeks
Sponsored by: Eldorado Research Institute (eldorado.org.br)
e4b8deb222 removed the last in-tree uses of PCPU_INC(). Its
potential benefit is also practically nonexistent. Non-x86
platforms already implement it as PCPU_ADD(..., 1), and according
to [0] there are no recent x86 processors for which the 'inc'
instruction provides a performance benefit over the equivalent
memory-operand form of the 'add' instruction. The only remaining
benefit of 'inc' is smaller instruction size, which in this case
is inconsequential given the limited number of per-CPU data consumers.
[0]: https://www.agner.org/optimize/instruction_tables.pdf
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29308
In r361544, the pmap drivers were converted to ifuncs. When doing so,
this changed the call type of pmap functions to be called via the
secure-plt stubs.
These stubs depend on the TOC base being loaded to r30 to run properly.
On SMP AIM (i.e. a dual processor G4 or running 32-bit on G5), since the
APs were being started up from the reset vector instead of going
through __start, they had never had r30 initialized properly, so when the
cpu_reset code in trap_subr32.S attempted to branch to
pmap_cpu_bootstrap(), it was loading the target from the wrong location.
Ensure r30 is set up directly in the cpu_reset trap code, so we can make
PLT calls as normal.
Fixes boot on my SMP G4.
Reviewed by: jhibbits
MFC after: 3 days
Sponsored by: Tag1 Consulting, Inc.
In uart_phyp_get(), when the internal buffer is empty, we make a
hypercall to retrieve up to 16 bytes of input data from the
hypervisor. As this is specified to be returned in BE format, we need
to do a 64-bit byte swap on the first and second half of the data.
If the buffer being passed in was insufficient to return the fetched
data, we store the remainder in the internal buffer and use it to
satisfy the following calls to uart_phyp_get() until it is drained.
However, in this case, we were accidentally byteswapping the internal
buffer again.
Move the byteswapping code to just after the hypercall so it only gets
swapped when we're filling the buffer.
Fixes arrow keys in qemu on pseries, among other console oddities.
Sponsored by: Tag1 Consulting, Inc.
MFC after: 3 days
This macro returns true if a provided virtual address is contained
in the kernel's clean submap.
In CHERI kernels, the buffer cache and transient I/O map are allocated
as separate regions. Abstracting this check reduces the diff relative
to FreeBSD. It is perhaps slightly more readable as well.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D28710
In 78599c32ef, CFI endproc decoration was
added to locore64.S. However, it missed the subtle detail that
__restartkernel_virtual() falls through to __restartkernel(). This was
causing boot failure on PowerMac G5, as it tried to execute the
epilogue as code.
Fix this by branching to __restartkernel() instead of intentionally
running off the end of the function.
While here, add some additional notes on how the virtual mode restart
works.
MFC after: 3 days
lang/rust needs COMPAT_FREEBSD11 to build, even though powerpc64le itself is supported only since 13.0.
I also corrected a comment, because if we ever have lib32 for powerpc64le, it will be for powerpcle.
Reviewed by: bdragon (on IRC)
Submitted by: Andre Fernando da Silva <andre.silva@eldorado.org.br>
Reviewed by: luporl, alfredo, kadesai (on email)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26531
Summary:
The values returned by this function are reported to the gdb client as
the reason for the break in execution, a signal value such as SIGTRAP,
SIGEMT, or SIGSEGV. As such, exact vector numbers can be misidentified.
Return SIGEMT in the default case instead.
Reviewed by: alfredo
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28046
Support for powerpc64le appeared in 13, so there's no point to enable COMPAT_* for older releases.
Also disable COMPAT_FREEBSD32, since there's no powerpcle. Since that may change in the future, leave the option commented out.
Approved by: bdragon, jhibbits (on IRC)
This is the superset of the nooptions found in the -DEBUG kernels.
Reviewed by: emaste, manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28152
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
It's possible for a context switch, and CPU migration, to occur between
fetching the PCPU context and extracting the pc_curpcb. This can cause
the fault handler to be installed for the wrong thread, leading to a
panic in copyin()/copyout(). Since curthread is already in %r13, just
use that directly, as GPRs are migrated, so there is no migration race
risk.
