filesystem layer, as was done in lite-2. Merged in some other cosmetic
changes while I was at it. Rewrote most of msdosfs_access() to be more
like ufs_access() and to include the FS read-only check.
Obtained from: partially from 4.4BSD-lite2
prototypes for all syscalls. The args structs are still declared in
comments as in VOP implementation functions. I don't like the
duplication for this, but several more layers of changes are required
to get it right. First we need to catch up with 4.4lite2, which uses
macros to handle struct padding. Then we need to catch up with NetBSD,
which passes the args correctly (as void *). Then we need to handle
varargs functions and struct padding better. I think all the details
can be hidden in machine-generated functions so that the args structs
and verbose macros to reference them don't have to appear in the core
sources.
Add prototypes.
Add bogus casts to hide the evil type puns exposed by the previous
steps. &uap[1] was used to get at the args after the first. This
worked because only the first arg in *uap was declared. This broke
when the machine- genenerated args struct declared all the args
(actually it declares extra args in some cases and depends on the
user stack having some accessible junk after the last arg, not to
mention the user args being on the stack. It isn't possible to
declare a correct args struct for a varargs syscall). The msgsys(),
semsys() and shmsys() syscall interfaces are BAD because they
multiplex several syscalls that have different types of args.
There was no reason to duplicate this sysv braindamage but now
we're stuck with it. NetBSD has reimplemented the syscalls properly
as separate syscalls #220-231.
Declare static functions as static in both their prototype and their
implementation (the latter is optional, and this misfeature was used).
Remove gratuitous #includes.
Continue cleaning up new init stuff.
valid bytes, we must also clear the B_DONE flag. Some filesystems
depend on this (incl NFS) and is probably the cause of the biodone
error and subsequent crash. Anyway this change needs to be made.
Add SA_NODEFER define to signal.h
Add ps_nodefer field to struct sigacts in signalvar.h.
Add code to kern_sig.c to handle SA_NODEFER.
If flag is set, when the signal is delivered, it is not masked automatically
from receiving the same signal again.
Reviewed by: wollman, bde
option DDB_NO_LCALLS to stop ddb getting control and broke all ddb
tracing. Now there is no option and no way for ddb to trace at
address _Xsyscall or to _Xsyscall, but tracing everywhere else
works. The previous fix did unnecessary things for Linux syscalls.
Don't bother checking that syscall frames are for user mode.
Make debugger traps inside the kernel (except at addresses _Xsyscall
and _Xsyscall+1) fatal if ddb is not configured. They "can't happen".
Add prototypes.
Remove stupid comments, e.g., /*ARGSUSED*/ for args that are used.
Prototypes are located in <sys/sysproto.h>.
Add appropriate #include <sys/sysproto.h> to files that needed
protos from systm.h.
Add structure definitions to appropriate files that relied on sys/systm.h,
right before system call definition, as in the rest of the kernel source.
In kern_prot.c, instead of using the dummy structure "args", create
individual dummy structures named <syscall>_args. This makes
life easier for prototype generation.
Add CPT_NOA type which is COMPAT with NOARGS -- do not produce argument
struct in sysproto.
Change accept, recvfrom, getsockname to CPT_NOA type.
Fix getrlimit, setrlimit argument #2 name to struct rlimit.
Instead of using a fake "compat" argument, pass a real compat int to function
if COMPAT_43 is defined. Functions involved: wait4, accept, recvfrom,
getsockname.
With the compat psuedo-argument, this introduces an argument structure
that can have two possible sizes depending on compat options.
This makes life difficult for lkm modules like ibcs2, which would
have to guess what size used in kernel when compiled. Also,
the prototype generator for these structures cannot generate proper sizes.
Now there is only one fixed structure and makes everybody happy.
I recommend these changes be introduced to 2.1 so that ibcs2, linux
lkm's generated for 2.2 can still run on a 2.1 kernel.
o optional config-file to set vars: sysnames, sysproto, sysproto_h,
syshdr, syssw, syshide, syscallprefix, switchname, namesname, sysvec.
o change syntax of syscalls.master entry:
remove argument count.
add pseudo-prototype field defining function name and arguments.
o generates correct structure definitions for all system calls
in sys/sysproto.h
o add type NOARGS: same as STD except do not create structure in
sys/sysproto.h
o add type NOPROTO: same as STD except do not create structure or function
prototype in sys/sysproto.h
New functionality provides complete prototype definitions.
Usefull for generating files for emulated systems like my new ibcs2 code.
Update syscalls.master to reflect new changes. For example, read()
entry now looks like:
3 STD POSIX { int ibcs2_read(int fd, char *buf, u_int nbytes); }
This is similar to how NetBSD generates these files.
Obtained from: other people on the net ?
1. stepping over syscalls (gdb ni) sends you to DDB, and returned
to the wrong address afterwards, with or without DDB. patch in
i386/i386/trap.c below.
2. the linux emulator (modload'ed) still causes panics with DIAGNOSTIC,
re-applied a patch posted to one of the lists...
This is a place for all things to do with conf.c and conf.h
that are not machine specific.
Other things that are at present in i386/isa/conf.c might
migrate into here..
It's the first small step in cleaning up the device interface
to make it more dynamic and to assist in more modular drivers
(i.e. both loadable via LKMs and linked in..
e.g able to add a device without having to edit conf.c)
this code is not yet used and the whole thing will be conditionally
compiled in for a while till proven useful :)
1) "obj" was't initialized properly, resulting in an important vm_page_lookup
always failing (resulting in a panic).
2) busy pages could be put on the cache queue or freed (resulting in a panic).
support for EXT2FS. Note that the Sig-11 problems appear to be caused by
this, but there is still probably an underlying VM problem that let this
clustering bug cause vnode objects to appear to be corrupted.
The direct manifestation of this bug would have been severely mis-read
files. It is possible that processes would Sig-11 on very damaged
input files and might explain the mysterious differences in system
behaviour when phk's malloc is being used.
<sys/sysproto.h> and use them (so far only) in kern/init_sysent.c.
Don't put $Id in generated files.
kern/syscalls.master:
I had to add some new fields to describe some non-orthogonal names.
E.g., the args struct for the syscall-implementing function foo()
is usually named `foo_args', but for getpid() it is named `args'.
sys/sysent.h:
sy_call_t is still incomplete to hide a couple of warnings.
definitions even though the functions are inline. If vnode_if.h was
compiled by a non-ANSI compiler, then `inline' would be defined away,
so vnode_if.h might compile correctly.
the first one in the config has priority. They can be switched using
userconfig().
i386/i386/conf.c:
Initialize the shared syscons/pcvt cdevsw entry to `nx'.
Add cdevsw registration functions.
Use devsw functions of the correct type if they exist.
i386/i386/cons.c:
Add renamed syscons entry points to constab.
i386/i386/cons.h:
Declare the renamed syscons entry points.
i386/i386/machdep.c:
Repeat console initialization after userconfig() in case the current
console has become wrong. This depends on cn functions not wiring down
anything important.
sys/conf.h:
Declare new functions.
i386/isa/isa.[ch]:
Add a function to decide which display driver has priority. Should be
done better.
i386/isa/syscons.c:
Rename pccn* -> sccn*.
Initialize CRTC start address in case the previous driver has moved it.
i386/isa/syscons.c, i386/isa/pcvt/*
Initialize the bogusly shared variable Crtat dynamically in case the
stored value was changed by the previous driver.
Initialize cdevsw table from a template.
Don't grab the console if another display driver has priority.
i386/isa/syscons.h, i386/isa/pcvt/pcvt_hdr.h:
Don't externally declare now-static cdevsw functions.
i386/isa/pcvt/pcvt_hdr.h:
Set the sensitive hardware flag so that pcvt doesn't always have lower
priority than syscons. This also fixes the "stupid" detection of the
display after filling the display with text.
i386/isa/pcvt/pcvt_out.c:
Don't be confused the off-screen cursor offset 0xffff set by syscons.
kern/subr_xxx.c:
Add enough nxio/nodev/null devsw functions of the correct type for syscons
and pcvt.
Split off cdevsw initialization in cninit() into a new function
cninit_finish() that isn't called until all hardware device drivers
have been attached. The bdevsw entry of the driver for the physical
console needs to be hooked after the physical driver has been
attached in case the attachment modified the entry.
Rearrange cninit() to avoid changing cn_tab until the driver for the
physical console has been initialized, so that the previous driver
(if any) can be used for debugging.
Start removing half-baked lint support. bdevsw functions usually have
unused args but /*ARGSUSED*/ was used for only about 5% of them.
cons.h:
Declare cn_init_finish().
autoconf.c:
Call cn_init_finish().
Start adding prototypes. Functions with bogus linkage (extern where
static is probably should be static) are explicitly declared as extern
so that the can be found easily (extern in a non-header is usually
wrong).
All:
Continue cleaning up init stuff: init functions shall be static;
INITs should be at the start of files...
Better performance -- more aggressive read-ahead
under certain circumstanses.
Mods to support clustering on small
( < PAGE_SIZE) block size filesystems (e.g. ext2fs,
msdosfs.)
changes to allow devices that don't probe (e.g. /dev/mem)
to create devfs entries
this required giving 'configure' its own SYSINIT entry
so we could duck in just before it with a DEVFS init
and some device inits..
my devfs now looks like:
./misc
./misc/speaker
./misc/mem
./misc/kmem
./misc/null
./misc/zero
./misc/io
./misc/console
./misc/pcaudio
./misc/pcaudioctl
./disks
./disks/rfloppy
./disks/rfloppy/fd0.1440
./disks/rfloppy/fd1.1200
./disks/floppy
./disks/floppy/fd0.1440
./disks/floppy/fd1.1200
also some sligt cleanups.. DEVFS needs a lot of work
but I'm getting back to it..
4k to 8k. This has a significant effect on the pipe performance. In
the future it might be good to increase this to 16k. PIPSIZ is now
tunable for experimentation.
external linkage.
Remove useless comments saying that SYSINIT() does system initialization.
shm.c:
Remove nearly useless comment that gave wrong pseudo-prototypes.
bp->b_flags has been broken for many years:
a) they didn't set B_BUSY for doing i/o. This has been fatal since
1995/07/25 when biodone() started checking that B_BUSY is set.
b) they didn't set B_INVAL for releasing the buffer. This at best
just put a useless buffer in the LRU queue for a little while.
Fix a couple of spelling errors and complete a couple of function
pointer declarations.
Submitted by: terry (terry lambert)
This is a composite of 3 patch sets submitted by terry.
they are:
New low-level init code that supports loadbal modules better
some cleanups in the namei code to help terry in 16-bit character support
some changes to the mount-root code to make it a little more
modular..
NOTE: mounting root off cdrom or NFS MIGHT be broken as I haven't been able
to test those cases..
certainly mounting root of disk still works just fine..
mfs should work but is untested. (tomorrows task)
The low level init stuff includes a total rewrite of init_main.c
to make it possible for new modules to have an init phase by simply
adding an entry to a TEXT_SET (or is it DATA_SET) list. thus a new module can
be added to the kernel without editing any other files other than the
'files' file.
