These issues (PR 218860 and PR 218861) are still undergoing additional
discussion in the upstream context and there may be additional changes
to come.
PR: 218860
Submitted by: Eric McCorkle
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10486
The Tag_ABI_VFP_args build attribute controls the procedure call
standard used for floating point parameters on ARM. The values are:
0 - Base AAPCS (FP Parameters passed in Core (Integer) registers
1 - VFP AAPCS (FP Parameters passed in FP registers)
2 - Toolchain specific (Neither Base or VFP)
3 - Compatible with all (No use of floating point parameters)
If the Tag_ABI_VFP_args build attribute is missing it has an implicit
value of 0.
We use the attribute in two ways:
* Detect a clash in calling convention between Base, VFP and Toolchain.
we follow ld.bfd's lead and do not error if there is a clash between an
implicit Base AAPCS caused by a missing attribute. Many projects
including the hard-float (VFP AAPCS) version of glibc contain assembler
files that do not use floating point but do not have Tag_ABI_VFP_args.
* Set the EF_ARM_ABI_FLOAT_SOFT or EF_ARM_ABI_FLOAT_HARD ELF header flag
for Base or VFP AAPCS respectively. This flag is used by some ELF
loaders.
References:
* Addenda to, and Errata in, the ABI for the ARM Architecture for
Tag_ABI_VFP_args
* Elf for the ARM Architecture for ELF header flags
Fixes LLVM PR36009
PR: 229050
Obtained from: llvm r338377 by Peter Smith
The LLD implementation of Tag_ABI_VFP_args needs to check the rarely
seen values of 3 (toolchain specific) and 4 compatible with both Base
and VFP. Add the missing enumeration values so that LLD can refer to
them without having to use the raw numbers.
Obtained from: llvm r338373 by Peter Smith
The ELF for the Arm architecture document defines, for EF_ARM_EABI_VER5
and above, the flags EF_ARM_ABI_FLOAT_HARD and EF_ARM_ABI_FLOAT_SOFT.
These have been defined to be compatible with the existing
EF_ARM_VFP_FLOAT and EF_ARM_SOFT_FLOAT used by gcc for
EF_ARM_EABI_UNKNOWN.
This patch adds the flags in addition to the existing ones so that any
code depending on the old names will still work.
Obtained from: llvm r338370 by Peter Smith
Update vendor/libarchive/dist to git 2c8c83b9731ff822fad6cc8c670ea5519c366a14
Important vendor changes:
PR #993: Chdir to -C directory for metalog processing
OSS-Fuzz #4969: Check size of the extended time field in zip archives
PR #973: Record informational compression level in gzip header
MFC after: 1 week
[ELF] Update addends in non-allocatable sections for REL targets when
creating a relocatable output.
LLVM PR: 37735
LLVM Differential Revision: https://reviews.llvm.org/D48929
PR: 225128
Obtained from: LLVM r336799 by Igor Kudrin
This code was originally written for NetBSD. r306031 tried to adapt it to
FreeBSD, but didn't correctly handle the case that tmpfs was available, but
not already loaded. Fix the logic to load the module if necessary. The
tmpfs tests shouldn't be skipped anymore.
Also, fix a comment that was dislocated by r306031.
Reported by: Jenkins
MFC after: 2 weeks
Code analysis and runtime analysis using truss(8) indicate that the only
privileged operations performed by ntpd are adjusting system time, and
(re-)binding to privileged UDP port 123. These changes add a new mac(4)
policy module, mac_ntpd(4), which grants just those privileges to any
process running with uid 123.
This also adds a new user and group, ntpd:ntpd, (uid:gid 123:123), and makes
them the owner of the /var/db/ntp directory, so that it can be used as a
location where the non-privileged daemon can write files such as the
driftfile, and any optional logfile or stats files.
Because there are so many ways to configure ntpd, the question of how to
configure it to run without root privs can be a bit complex, so that will be
addressed in a separate commit. These changes are just what's required to
grant the limited subset of privs to ntpd, and the small change to ntpd to
prevent it from exiting with an error if running as non-root.
Differential Revision: https://reviews.freebsd.org/D16281
Prevent installation of an all-zero TK.
This is also upline git commit 53bb18cc8b7a4da72e47e4b3752d0d2135cffb23.
Obtained from: https://w1.fi/security/2017-1/\
rebased-v2.6-0004-Prevent-installation-\
of-an-all-zero-TK.patch
X-MFC-with: r336203
libibverbs example utilities.
This allows connecting to both IPv4 and IPv6 and reverts
some FreeBSD only patches.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Add the ability to to parse sysfs paths to sysctl nodes by replacing '/' with '.'
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Request init/fini array on FreeBSD 12 and later
Summary:
It seems a bad idea to change the default in the middle of a release
branch due to possible changes in global ctor / dtor ordering between
.ctors and .init_array. With FreeBSD 11.0's release imminent lets
change the default now for FreeBSD 12 (the current development
stream) and later.
FreeBSD rtld has supported .init_array / .fini_array for many years.
As of Jan 1 2017 all supported FreeBSD releases and branches will
have support.
Reviewers: dim, brooks, arichardson
Reviewed By: dim, brooks, arichardson
Subscribers: bsdjhb, krytarowski, emaste, cfe-commits
Differential Revision: https://reviews.llvm.org/D24867
Requested by: jhb
MFC after: 3 days
auditd_wait_for_events() relies on read(2) being interrupted by signals,
but it registers signal handlers with signal(3), which sets SA_RESTART.
That breaks asynchronous signal handling. It means that signals don't
actually get handled until after an audit(8) trigger is received.
Symptoms include:
* Sending SIGTERM to auditd doesn't kill it right away; you must send
SIGTERM and then send a trigger with auditon(2).
* Same with SIGHUP
* Zombie child processes don't get reaped until auditd receives a trigger
sent by auditon. This includes children created by expiring audit trails
at auditd startup.
Fix by using sigaction(2) instead of signal(3).
Cherry pick https://github.com/openbsm/openbsm/commit/d060887
PR: 229381
Reviewed by: cem
Obtained from: OpenBSM
MFC after: 2 weeks
Differential Revision: https://github.com/openbsm/openbsm/pull/36
The issue was caused by header pollution brought by GCC 8.1.
We now have to remove include-fixed headers in the GCC installation
directory.
Sponsored by: DARPA, AFRL
Pointed out by: jhb
o Also move printf.h to go after it since it does require declaration
of va_list.
This fixes build with latest RISC-V GNU Toolchain with GCC 8.1
Sponsored by: DARPA, AFRL
For developers gensnmptree can now generate functions for enums to convert
between enums and strings and to check the validity of a value.
The sources in FreeBSD are now in sync with the upstream which allows to
bring in IPv6 modifications.
- Change the C++ directory entries to honor --sysroot if it is set.
- Don't define CROSS_INCLUDE_DIR for the cross compiler. Instead, set
TARGET_SYSTEM_ROOT to point to WORLDTMP and always define
STANDARD_INCLUDE_DIR.
- Change STANDARD_INCLUDE_DIR and the C++ include directories to just
start with "/usr" always. The compiler will prepend the sysroot when
doing cross-builds. GCC_INCLUDE_DIR (which contains headers that ship
with the compiler such as intrinsincs rather than OS-supplied headers)
remains hardcoded to look in TOOLS_PREFIX.
Reviewed by: bdrewery (older version)
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D15127
Magic file for dump(8) had this dump and previous dump dates reversed.
Fix order for all three flavours of the dump(8) format.
This fix was committed to upstream repo as magic/Magdir/dump,v 1.17
and will be merged during next vendor import.
PR: 223155
MFC after: 2 weeks
The local hostname was blindly copied into the to the nn_name array.
When the hostname exceeded 16 bytes, it would overflow. Truncate the
hostname to 15 bytes plus a 0 terminator which is the "workstation name"
suffix.
Use defensive strlcpy() when filling nn_name in all cases.
PR: 228354
Reported by: donald.buchholz@intel.com
Reviewed by: jpaetzel, ian (prior version)
Discussed with: Security Officer (gtetlow)
MFC after: 3 days
Security: Stack overflow with the hostname.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15936
o Restore floating-point registers in jumpto()
These are required to native cross build GCC and GDB
(both do require libc++ and libunwind).
These are not tested.
Sponsored by: DARPA, AFRL
